Hexagonal Boron Nitride-Enhanced Optically Transparent Polymer Dielectric Inks for Printable Electronics.

Solution-processable thin-film dielectrics represent an important material family for large-area, fully-printed electronics. Yet, in recent years, it has seen only limited development, and has mostly remained confined to pure polymers. Although it is possible to achieve excellent printability, these polymers have low (≈2-5) dielectric constants (ε r ). There have been recent attempts to use solution-processed 2D hexagonal boron nitride (h-BN) as an alternative. However, the deposited h-BN flakes create porous thin-films, compromising their mechanical integrity, substrate adhesion, and susceptibility to moisture. These challenges are addressed by developing a "one-pot" formulation of polyurethane (PU)-based inks with h-BN nano-fillers. The approach enables coating of pinhole-free, flexible PU+h-BN dielectric thin-films. The h-BN dispersion concentration is optimized with respect to exfoliation yield, optical transparency, and thin-film uniformity. A maximum ε r ≈ 7.57 is achieved, a two-fold increase over pure PU, with only 0.7 vol% h-BN in the dielectric thin-film. A high optical transparency of ≈78.0% (≈0.65% variation) is measured across a 25 cm2 area for a 10 µm thick dielectric. The dielectric property of the composite is also consistent, with a measured areal capacitance variation of <8% across 64 printed capacitors. The formulation represents an optically transparent, flexible thin-film, with enhanced dielectric constant for printed electronics.

A general ink formulation of 2D crystals for wafer-scale inkjet printing.

Recent advances in inkjet printing of two-dimensional (2D) crystals show great promise for next-generation printed electronics development. Printing nonuniformity, however, results in poor reproducibility in device performance and remains a major impediment to their large-scale manufacturing. At the heart of this challenge lies the coffee-ring effect (CRE), ring-shaped nonuniform deposits formed during postdeposition drying. We present an experimental study of the drying mechanism of a binary solvent ink formulation. We show that Marangoni-enhanced spreading in this formulation inhibits contact line pinning and deforms the droplet shape to naturally suppress the capillary flows that give rise to the CRE. This general formulation supports uniform deposition of 2D crystals and their derivatives, enabling scalable and even wafer-scale device fabrication, moving them closer to industrial-level additive manufacturing.

Single-nanowire spectrometers.

Spectrometers with ever-smaller footprints are sought after for a wide range of applications in which minimized size and weight are paramount, including emerging in situ characterization techniques. We report on an ultracompact microspectrometer design based on a single compositionally engineered nanowire. This platform is independent of the complex optical components or cavities that tend to constrain further miniaturization of current systems. We show that incident spectra can be computationally reconstructed from the different spectral response functions and measured photocurrents along the length of the nanowire. Our devices are capable of accurate, visible-range monochromatic and broadband light reconstruction, as well as spectral imaging from centimeter-scale focal planes down to lensless, single-cell-scale in situ mapping.

102 fs pulse generation from a long-term stable, inkjet-printed black phosphorus-mode-locked fiber laser.

We demonstrate a long-term stable, all-fiber, erbium-doped femtosecond laser mode-locked by a black phosphorus saturable absorber. The saturable absorber, fabricated by scalable and highly controllable inkjet printing technology, exhibits strong nonlinear optical response and is stable for long-term operation against intense irradiation, overcoming a key drawback of this material. The oscillator delivers self-starting, 102 fs stable pulses centered at 1555 nm with 40 nm spectral bandwidth. This represents the shortest pulse duration achieved from black phosphorus in a fiber laser to date. Our results demonstrate the great potential for black phosphorus as an excellent candidate for long-term stable ultrashort pulse generation.

Black phosphorus ink formulation for inkjet printing of optoelectronics and photonics.

Black phosphorus is a two-dimensional material of great interest, in part because of its high carrier mobility and thickness dependent direct bandgap. However, its instability under ambient conditions limits material deposition options for device fabrication. Here we show a black phosphorus ink that can be reliably inkjet printed, enabling scalable development of optoelectronic and photonic devices. Our binder-free ink suppresses coffee ring formation through induced recirculating Marangoni flow, and supports excellent consistency (< 2% variation) and spatial uniformity (< 3.4% variation), without substrate pre-treatment. Due to rapid ink drying (< 10 s at < 60 °C), printing causes minimal oxidation. Following encapsulation, the printed black phosphorus is stable against long-term (> 30 days) oxidation. We demonstrate printed black phosphorus as a passive switch for ultrafast lasers, stable against intense irradiation, and as a visible to near-infrared photodetector with high responsivities. Our work highlights the promise of this material as a functional ink platform for printed devices.Atomically thin black phosphorus shows promise for optoelectronics and photonics, yet its instability under environmental conditions and the lack of well-established large-area synthesis protocols hinder its applications. Here, the authors demonstrate a stable black phosphorus ink suitable for printed ultrafast lasers and photodetectors.