Critical Influence of Organic A'-Site Ligand Structure on 2D Perovskite Crystallization.

Organic A'-site ligand structure plays a crucial role in the crystal growth of 2D perovskites, but the underlying mechanism has not been adequately understood. This problem is tackled by studying the influence of two isomeric A'-site ligands, linear-shaped n-butylammonium (n-BA+ ) and branched iso-butylammonium (iso-BA+ ), on 2D perovskites from precursor to device, with a combination of in situ grazing-incidence wide-angle X-ray scattering and density functional theory. It is found that branched iso-BA+ , due to the lower aggregation enthalpies, tends to form large-size clusters in the precursor solution, which can act as pre-nucleation sites to expedite the crystallization of vertically oriented 2D perovskites. Furthermore, iso-BA+ is less likely to be incorporated into the MAPbI3 lattice than n-BA+ , suppressing the formation of unwanted multi-oriented perovskites. These findings well explain the better device performance of 2D perovskite solar cells based on iso-BA+ and elucidate the fundamental mechanism of ligand structural impact on 2D perovskite crystallization.

Promoting the Efficiency and Stability of Nonfullerene Organic Photovoltaics by Incorporating Open-Cage [60]Fullerenes in the Nonfullerene Nanocrystallites.

The device efficiency of PM6:Y6-based nonfullerene organic solar cells is fast advanced recently. To maintain organic solar cells (OSCs) with high power conversion efficiency over 16% in long-term operation, however, remains a challenge. Here, a novel non-volatile additive, an open-cage [60]fullerene (8OC60Me), is incorporated into PM6:Y6-based OSCs for high-performance with high durability. With optimized addition of 1.0 wt % 8OC60Me, the PCE value of PM6:Y6/8OC60Me OSCs can be promoted to 16.5% from 15.0%. Most strikingly, such a high PCE performance can maintain nearly 100% for over 500 h at room temperature; at an elevated operation temperature of 80 °C, the PCE can be stabilized above 15.0% after 45 h of operation. Grazing incidence small- and wide- angle X-ray scattering studies reveal improved orientation and crystallinity of Y6 in a fractal-like network structure of PM6 in PM6:Y6/8OC60Me films under in situ annealing, parallel to the enhanced electron mobility. Analysis of charge distributions lines up possible van der Waals interaction between the thienyl/carbonyl moiety of 8OC60Me and difluorophenyl-based FIC-end groups of Y6. This result is of great contrast to those devices with the best-selling PC61BM as the additives─8OC60Me might be of interest to be incorporated into future Y6-based OSCs for concomitantly improved PCE and excellent stability.

Directed Vertical Diffusion of Photovoltaic Active Layer Components into Porous ZnO-Based Cathode Buffer Layers.

Cathode buffer layers (CBLs) can effectively further the efficiency of polymer solar cells (PSCs), after optimization of the active layer. Hidden between the active layer and cathode of the inverted PSC device configuration is the critical yet often unattended vertical diffusion of the active layer components across CBL. Here, a novel methodology of contrast variation with neutron and anomalous X-ray reflectivity to map the multicomponent depth compositions of inverted PSCs, covering from the active layer surface down to the bottom of the ZnO-based CBL, is developed. Uniquely revealed for a high-performance model PSC are the often overlooked porosity distributions of the ZnO-based CBL and the differential diffusions of the polymer PTB7-Th and fullerene derivative PC71 BM of the active layer into the CBL. Interface modification of the ZnO-based CBL with fullerene derivative PCBEOH for size-selective nanochannels can selectively improve the diffusion of PC71 BM more than that of the polymer. The deeper penetration of PC71 BM establishes a gradient distribution of fullerene derivatives over the ZnO/PCBE-OH CBL, resulting in markedly improved electron mobility and device efficiency of the inverted PSC. The result suggests a new CBL design concept of progressive matching of the conduction bands.

CCN1/Cyr61 enhances the function of hepatic stellate cells in promoting the progression of hepatocellular carcinoma.

Hepatic stellate cells (HSCs) are the main extracellular matrix (ECM)­producing cells in liver fibrosis. Activated HSCs stimulate the proliferation and migration of hepatocellular carcinoma (HCC) cells. Cysteine­rich 61 (CCN1/Cyr61) is an ECM protein. Our previous studies demonstrated that the expression of CCN1 was significantly higher in benign hepatic cirrhosis tissue and cancer­adjacent hepatic cirrhosis tissues. CCN1 is a target gene of ß­catenin in HCC and promotes the proliferation of HCC cells. The present study aimed to examine whether CCN1 can activate HSCs and affect the function of activated HSCs in promoting the progression of HCC. CCN1 expression was determined during the progression of liver fibrosis in a mouse model. LX­2 cells, which were infected with adenoviruses AdCCN1 or AdRFP, and HepG2 cells were co­cultured or subcutaneously co­implanted into in nude mice. MTT assay, Crystal Violet staining, Boyden chamber, matrigel invasion and monolayer scratch assays were used to analyze the proliferation, migration and invasion capability of HepG2 cells. Xenograft sizes were measured and histological analyses were performed by hematoxylin and eosin, immunohistochemical, immunefluorescence and Sirius Red staining. It was demonstrated that the expression of CCN1 was continually increased in liver fibrosis and the that expression may be correlated with the progression of liver fibrosis. CCN1 affected the function of LX­2 and enhanced the effect of LX­2 on promoting the viability, migration and invasion of HepG2 cells in vitro. CCN1 enhanced the effect of LX­2 on promoting the growth of HepG2 xenografts in vivo. CCN1 also affected the function of activated HSCs and regulated the formation of the xenograft microenvironment, including fibrogenesis and angiogenesis, which are beneficial for the progression of HCC. These findings demonstrated that CCN1 may be involved in the progression of the hepatic cirrhosis­HCC axis through regulating HSCs.

Probing the Acid-Induced Packing Structure Changes of the Molten Globule Domains of a Protein near Equilibrium Unfolding.

Using simultaneously scanning small-angle X-ray scattering (SAXS) and UV-vis absorption with integrated online size exclusion chromatography, supplemental with molecular dynamics simulations, we unveil the long-postulated global structure evolution of a model multidomain protein bovine serum albumin (BSA) during acid-induced unfolding. Our results differentiate three global packing structures of the three molten globule domains of BSA, forming three intermediates I1, I2, and E along the unfolding pathway. The I1-I2 transition, overlooked in all previous studies, involves mainly coordinated reorientations across interconnected molten globule subdomains, and the transition activates a critical pivot domain opening of the protein for entering into the E form, with an unexpectedly large unfolding free energy change of -9.5 kcal mol-1, extracted based on the observed packing structural changes. The revealed local packing flexibility and rigidity of the molten globule domains in the E form elucidate how collective motions of the molten globule domains profoundly influence the folding-unfolding pathway of a multidomain protein.

A small angle X-ray scattering study of the structure and development of looseness in bovine hides and leather.

BACKGROUND: Some bovine hides produce poor quality leather, termed loose leather. The structural characteristics of hides and the intermediate processed stages that lead to loose leather are not well understood. In the present study, synchrotron-based small angle X-ray scattering (SAXS) is used to investigate collagen fibril orientation at the different stages of processing (i.e. from hide through to leather) that result in both tight and loose leathers. RESULTS: Tight leather of a relatively isotropic texture has a lower orientation index (OI) than loose leather of a more pronounced stratified texture; conversely, tight pickled hide and wet blue have a higher OI than loose pickled hide and wet blue. There is a greater increase in OI on processing from pickled hide to dry crust (leather) for loose material. This is largely the result of a greater increase in hide thickness prior to pickling for loose hide than tight hide, followed by a greater decrease at the dry crust stage. The collagen fibrils in loose leather and wet blue more readily orient under stress than do those in tight leather. Loose leather has a more pronounced layered structure than tight leather, although this difference is not apparent from SAXS measurements of hide prior to the dry crust stage; it develops during processing. CONCLUSION: The greater swelling of the loose hide during processing disrupts the structure and leads to a more layered collagen arrangement on shrinking at the final dry crust stage. © 2016 Society of Chemical Industry.

Correlated changes in structure and viscosity during gelatinization and gelation of tapioca starch granules.

Melting of native tapioca starch granules in aqueous pastes upon heating is observed in situ using simultaneous small- and wide-angle X-ray scattering (SAXS/WAXS) and solution viscometry. Correlated structure and viscosity changes suggest closely associated amylose and amylopectin chains in the semicrystalline layers, and the release of amylose chains for enhanced solution viscosity occurs largely after melting of the semicrystalline structure. Before melting, WAXS results reveal mixed crystals of A- and B-types (∼4:1 by weight), whereas SAXS results indicate that the semicrystalline layers are composed of lamellar blocklets of ca 43 nm domain size, with polydisperse crystalline (≃7.5 nm) and amorphous (≃1.1 nm) layers alternatively assembled into a lamellar spacing of ≃8.6 nm with 20% polydispersity. Upon melting, the semicrystalline lamellae disintegrate into disperse and molten amylopectin nanoclusters with dissolved and partially untangled amylose chains in the aqueous matrix which leads to increased solution viscosity. During subsequent cooling, gelation starts at around 347 K; successively increased solution viscosity coincides with the development of nanocluster aggregation to a fractal dimension ≃2.3 at 303 K, signifying increasing intercluster association through collapsed amylose chains owing to decreased solvency of the aqueous medium with decreasing temperature.

Wnt5a enhances the response of CML cells to Imatinib Mesylate through JNK activation and γ-catenin inhibition.

Imatinib Mesylate is widely used for the treatment of chronic myelogenous leukaemia (CML), and its effects on CML cells are influenced by several signalling proteins. The research is aimed at determining whether Wnt5a affects the effects of Imatinib Mesylate against BCR-ABL positive CML cells (K562 cells and KU812 cells) and which signalling proteins are involved in. The results showed that Wnt5a augmented the effects of Imatinib Mesylate on inhibiting CML cells proliferation and inducing apoptosis in vitro; Wnt5a enhanced the inhibition effect of Imatinib Mesylate on the growth of K562 cells xenograft tumour in an animal model. Furthermore, Wnt5a inhibited ß-catenin and its target gene Survivin, increased the activity of JNK and suppressed γ-catenin expression. When inhibiting the activity of JNK, the influence of Wnt5a on the effects of Imatinib Mesylate was attenuated. Moreover, JNK suppressed ß-catenin and its target gene Survivin, and enhanced the effects of Imatinib Mesylate. These results suggest that Wnt5a can enhance the efficacy of Imatinib Mesylate through JNK/ß-catenin/Survivin and γ-catenin/ß-catenin/Survivin pathways.

Mechanism and control of the structural evolution of a polymer solar cell from a bulk heterojunction to a thermally unstable hierarchical structure.

We simultaneously employed grazing incidence small-angle and wide-angle X-ray scattering (GISAXS and GIWAXS) techniques to quantitatively study the structural evolution and kinetic behavior of poly(3-hexylthiophene) (P3HT) crystallization, [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) aggregation and amorphous P3HT/PCBM domains from a bulk heterojunction (BHJ) to a thermally unstable structure. The independent phase separation regimes on the nanoscale (∼10 nm), mesoscale (∼100 nm) and macroscale (∼µm) are revealed for the first time. Bis-PCBM molecules as inhibitors incorporated into the P3HT/PCBM blend films were adopted as a case study of a control strategy for improving the thermal stability of P3HT/PCBM solar cell. The detailed information on the formation, growth, transformation and mutual interaction between different phases during the hierarchical structural evolution of P3HT/PCBM:xbis-PCBM (x = 8-100%) blend films are presented herein. This systematic study proposes the mechanisms of thermal instability for a polymer/fullerene-based solar cell. We demonstrate a new fundamental concept that the structural evolution and thermal stability of mesoscale amorphous P3HT/PCBM domains during heating are the origin of controlling thermal instability rather than those of nanoscale thermally-stable BHJ structures. It leads to a low-cost and easy-fabrication control strategy for effectively tailoring the hierarchical morphology against thermal instability from molecular to macro scales. The optimum treatment achieving high thermal stability, control of mesoscale domains, can be effectively designed. It is independent of the original BHJ nanostructure design of a polymer/fullerene-based solar cell with high performance. It advances the general knowledge on the thermal instability directly arising from the nanoscale structure.

Downregulation of γ-catenin inhibits CML cell growth and potentiates the response of CML cells to imatinib through ß-catenin inhibition.

γ-catenin plays different roles in different types of tumors, and its role in chronic myeloid leukemia (CML) cells has yet to be identified. In our study, two CML cell lines (K562, KU812) had higher γ-catenin expression levels compared to five types of BCR-ABL-negative leukemia cells. Knockdown of the expression of BCR-ABL resulted in downregulation of γ-catenin. Furthermore, downregulation of γ-catenin by siRNA inhibited the proliferation and colony formation of CML cells and the expression of the c-Myc and cyclin D1 genes; downregulation of γ-catenin also potentiated the effects of imatinib (inhibiting CML cell proliferation and inducing apoptosis) and suppressed the anti-apoptotic genes Bcl-xL and survivin. We also showed that downregulation of γ-catenin suppressed the phosphorylation of STAT5, promoted the phosphorylation of ß-catenin and reduced the translocation of ß-catenin into the nucleus, although there were no effects on the total level of ß-catenin expression in the whole cells. Furthermore, downregulation of γ-catenin was found to promote glycogen synthase kinase-3ß (GSK3ß) and inhibit its phosphorylation. Collectively, our results suggest that γ-catenin is an oncogene protein in CML that can be regulated by BCR-ABL and that suppression of γ-catenin inhibits CML cell growth and potentiates the effects of imatinib on CML cells through inhibition of the activation of STAT5 and suppression of ß-catenin by activating GSK3ß.

Cyr61/CCN1 is regulated by Wnt/ß-catenin signaling and plays an important role in the progression of hepatocellular carcinoma.

Abnormal activation of the canonical Wnt signaling pathway has been implicated in carcinogenesis. Transcription of Wnt target genes is regulated by nuclear ß-catenin, whose over-expression is observed in Hepatocellular Carcinoma (HCC) tissue. Cyr61, a member of the CCN complex family of multifunctional proteins, is also found over-expressed in many types of tumor and plays dramatically different roles in tumorigenesis. In this study, we investigated the relationship between Cyr61 and ß-catenin in HCC. We found that while Cyr61 protein was not expressed at a detectable level in the liver tissue of healthy individuals, its expression level was elevated in the HCC and HCC adjacent tissues and was markedly increased in cancer-adjacent hepatic cirrhosis tissue. Over-expression of Cyr61 was positively correlated with increased levels of ß-catenin in human HCC samples. Activation of ß-catenin signaling elevated the mRNA level of Cyr61 in HepG2 cells, while inhibition of ß-catenin signaling reduced both mRNA and protein levels of Cyr61. We identified two TCF4-binding elements in the promoter region of human Cyr61 gene and demonstrated that ß-catenin/TCF4 complex specifically bound to the Cyr61 promoter in vivo and directly regulated its promoter activity. Furthermore, we found that over-expression of Cyr61 in HepG2 cells promoted the progression of HCC xenografts in SCID mice. These findings indicate that Cyr61 is a direct target of ß-catenin signaling in HCC and may play an important role in the progression of HCC.

Competition between fullerene aggregation and poly(3-hexylthiophene) crystallization upon annealing of bulk heterojunction solar cells.

Concomitant development of [6,6]-phenyl-C(61)-butyric acid methyl ester (PCBM) aggregation and poly(3-hexylthiophene) (P3HT) crystallization in bulk heterojunction (BHJ) thin-film (ca. 85 nm) solar cells has been revealed using simultaneous grazing-incidence small-/wide-angle X-ray scattering (GISAXS/GIWAXS). With enhanced time and spatial resolutions (5 s/frame; minimum q ≈ 0.004 Å(-1)), synchrotron GISAXS has captured in detail the fast growth in size of PCBM aggregates from 7 to 18 nm within 100 s of annealing at 150 °C. Simultaneously observed is the enhanced crystallization of P3HT into lamellae oriented mainly perpendicular but also parallel to the substrate. An Avrami analysis of the observed structural evolution indicates that the faster PCBM aggregation follows a diffusion-controlled growth process (confined by P3HT segmental motion), whereas the slower development of crystalline P3HT nanograins is characterized by constant nucleation rate (determined by the degree of supercooling and PCBM demixing). These two competing kinetics result in local phase separation with space-filling PCBM and P3HT nanodomains less than 20 nm in size when annealing temperature is kept below 180 °C. Accompanying the morphological development is the synchronized increase in electron and hole mobilities of the BHJ thin-film solar cells, revealing the sensitivity of the carrier transport of the device on the structural features of PCBM and P3HT nanodomains. Optimized structural parameters, including the aggregate size and mean spacing of the PCBM aggregates, are quantitatively correlated to the device performance; a comprehensive network structure of the optimized BHJ thin film is presented.