Energy Balance and Bone Health: a Nutrient Availability Perspective.

PURPOSE OF REVIEW: Obesity is highly prevalent and is associated with bone fragility and fracture. The changing nutrient availability to bone in obesity is an important facet of bone health. The goal of this article is to summarize current knowledge on the effects of carbohydrate and dietary fat availability on bone, particularly in the context of other tissues. RECENT FINDINGS: The skeleton is a primary site for fatty acid and glucose uptake. The trafficking of carbohydrates and fats into tissues changes with weight loss and periods of weight gain. Exercise acutely influences nutrient uptake into bone and may affect nutrient partitioning to bone. Bone cells secrete hormones that signal to the brain and other tissues information about its energetic state, which may alter whole-body nutrient trafficking. There is a critical need for studies to address the changes that metabolic perturbations have on nutrient availability in bone.

A novel, germline, deactivating CBL variant p.L493F alters domain orientation and is associated with multiple childhood cancers.

CBL is a mammalian gene encoding the protein CBL, which is an E3 ubiquitin-protein ligase involved in cell signaling and protein ubiquitination. Pathogenic variants in this gene have been implicated in a number of human cancers, particularly acute myeloid leukemia (AML). Here, we present a 5-year-old male patient with a history of AML, diffuse midline glioma, and left brain lesion with histiocytic features. A variant of uncertain significance (VUS): p.L493F was detected in his CBL gene via clinical evaluation. Protein modeling predicts this variant to be pathogenic. Details of the clinical evaluation and modeling assay are discussed.

3D-Printed Bioactive Calcium Silicate/Poly-ε-Caprolactone Bioscaffolds Modified with Biomimetic Extracellular Matrices for Bone Regeneration.

Currently, clinically available orthopedic implants are extremely biocompatible but they lack specific biological characteristics that allow for further interaction with surrounding tissues. The extracellular matrix (ECM)-coated scaffolds have received considerable interest for bone regeneration due to their ability in upregulating regenerative cellular behaviors. This study delves into the designing and fabrication of three-dimensional (3D)-printed scaffolds that were made out of calcium silicate (CS), polycaprolactone (PCL), and decellularized ECM (dECM) from MG63 cells, generating a promising bone tissue engineering strategy that revolves around the concept of enhancing osteogenesis by creating an osteoinductive microenvironment with osteogenesis-promoting dECM. We cultured MG63 on scaffolds to obtain a dECM-coated CS/PCL scaffold and further studied the biological performance of the dECM hybrid scaffolds. The results indicated that the dECM-coated CS/PCL scaffolds exhibited excellent biocompatibility and effectively enhanced cellular adhesion, proliferation, and differentiation of human Wharton's Jelly mesenchymal stem cells by increasing the expression of osteogenic-related genes. They also presented anti-inflammatory characteristics by showing a decrease in the expression of tumor necrosis factor-alpha (TNF-α) and interleukin-1 (IL-1). Histological analysis of in vivo experiments presented excellent bone regenerative capabilities of the dECM-coated scaffold. Overall, our work presented a promising technique for producing bioscaffolds that can augment bone tissue regeneration in numerous aspects.

Enhanced Capability of Bone Morphogenetic Protein 2-loaded Mesoporous Calcium Silicate Scaffolds to Induce Odontogenic Differentiation of Human Dental Pulp Cells.

INTRODUCTION: Calcium silicate bioceramics have been broadly used as reparative or grafting materials with good bioactivity and biocompatibility in dental application. It has been shown that applying a mesoporous process to calcium silicate gives it great potential as a controlled drug delivery system. METHODS: The aim of this study was to investigate a novel osteoinductive scaffold by loading bone morphogenetic protein 2 (BMP-2) to mesoporous calcium silicate (MesoCS) and fabricating it as 3-dimensional scaffolds using fused deposition modeling combined with polycaprolactone. RESULTS: The MesoCS/BMP-2 scaffold showed similar patterns to that of a calcium silicate scaffold in releasing calcium and silicon ions in a simulated body fluid (SBF) immersion test for 7 days, but BMP-2 continued releasing from the MesoCS/BMP-2 scaffold significantly more than the CS scaffold from 48 hours to 7 days. Adhesion and proliferation of human dental pulp cells cultured on a MesoCS/BMP-2 scaffold were also more significant than scaffolds without BMP-2 or mesoporous as well as the results of the test on alkaline phosphatase activity. CONCLUSIONS: The results support that the novel 3-dimensional-printed MesoCS scaffold performed well as BMP-2 delivery system and would be an ideal odontoinductive biomaterial in regenerative endodontics.

Osteogenic and angiogenic potentials of the cell-laden hydrogel/mussel-inspired calcium silicate complex hierarchical porous scaffold fabricated by 3D bioprinting.

3D printing has been popularly used in the bone tissue engineering, as many of the biomaterials for this field of study can be prepared for and produced from this additive manufacturing technique. In this study, we strategized a solvent-free processing to fabricate the polydopamine-modified calcium silicate (PDACS)/poly-caprolactone (PCL) scaffold with Wharton's jelly mesenchymal stem cells (WJMSCs) incorporated with human umbilical vein endothelial cells (HUVEC)-laden hydrogel. The PDACS/PCL/hydrogel 3D scaffold yielded a Young's modulus of the 3D scaffolds as high as 75 MPa. In addition, the vascular morphogenesis and cellular behaviors regulated by our hybrid scaffolds were also intricately evaluated. Furthermore, the HUVEC in the bioink exhibited higher levels of angiogenic biomarkers and showed potential for the formation of complex vascular networks. Higher levels of bone formation proteins were also observed in our composites. Such a hybrid of synthetic materials with cell constituents not only enhances osteogenesis but also stimulates vessel network development in angiogenesis, presenting the fact that 3D printing can be further applied in improving bone tissue regeneration in numerous aspects. We believe that this method may serve as a useful and effective approach for the regeneration of defective complex hard tissues in deep bone structures.

Bioactive calcium silicate/poly-ε-caprolactone composite scaffolds 3D printed under mild conditions for bone tissue engineering.

The present study provides a solvent-free processing method for establishing the ideal porous 3-dimension (3D) scaffold filled with different ratios of calcium silicate-based (CS) powder and polycaprolactone (PCL) for 3D bone substitute application. Characterization of hybrid scaffolds developed underwent assessments for physicochemical properties and biodegradation. Adhesion and growth of human Wharton's Jelly mesenchymal stem cells (WJMSCs) on the CS/PCL blended scaffold were investigated in vitro. Cell attachment and morphology were examined by scanning electron microscope (SEM) and confocal microscope observations. Colorimetric assay was tested for assessing cell metabolic activity. In addition, RT-qPCR was also performed for the osteogenic-related and angiogenesis-related gene expression. As a result, the hydrophilicity of the scaffolds was further significantly improved after we additive CS into PCL, as well as the compressive strength up to 5.8 MPa. SEM showed that a great amount of precipitated bone-like apatite formed on the scaffold surface after immersed in the simulated body fluid. The 3D-printed scaffolds were found to enhance cell adhesion, proliferation and differentiation. Additionally, results of osteogenesis and angiogenesis proteins were expressed obviously greater in the response of WJMSCs. These results indicate the CS/PCL composite exhibited a favorable bioactivity and osteoconductive properties that could be served as a promising biomaterial for bone tissue engineering scaffolds.

Anti-inflammation performance of curcumin-loaded mesoporous calcium silicate cement.

BACKGROUND/PURPOSE: Calcium silicate (CS) cements have excellent bioactivity and can induce the bone-like apatite formation. They are good biomaterials for bone tissue engineering and bone regenerative medicine. However, they have degradability and the dissolved CS can cause the inflammatory response at the early post-implantation stage. The purpose of this study was to design and prepare the curcumin-loaded mesoporous CS (MesoCS/curcumin) cements as a strategy to reduce the inflammatory reaction after implantation. METHODS: The MesoCS/curcumin cements were designed and prepared. The characteristics of MesoCS/curcumin specimens were examined by transmission electron microscopy (TEM), X-ray diffraction (XRD) and scanning electron microscopy (SEM). Their physical properties, biocompatibility, and anti-inflammatory ability were also evaluated. RESULTS: The MesoCS/curcumin cements displayed excellent biocompatibility and physical properties. Their crystalline characterizations were very similar with MesoCS cements. After soaking in simulated body fluid, the bone-like apatite layer of the MesoCS/curcumin cements could be formed. In addition, it could inhibit the expression of tumor necrosis factor-α (TNF-α) and interleukin-1 (IL-1) after inflammation reaction induced by lipopolysaccharides and had good anti-inflammatory ability. CONCLUSION: Adding curcumin in MesoCS cements can reduce the inflammatory reaction, but does not affect the original biological activity and properties of MesoCS cements. It can provide a good strategy to inhibit the inflammatory reaction after implantation for bone tissue engineering and bone regenerative medicine.

Mesoporous Calcium Silicate Nanoparticles with Drug Delivery and Odontogenesis Properties.

INTRODUCTION: Calcium silicate (CS) -based materials play an important role in the development of endodontic materials that induce bone/cementum tissue regeneration and inhibit bacterial viability. The aim of this study was to prepare novel mesoporous CS (MesoCS) nanoparticles that have osteogenic, drug delivery, and antibacterial characteristics for endodontic materials and also have an excellent ability to develop apatite mineralization. METHODS: The MesoCS nanoparticles were prepared using sol-gel methods. In addition, the mesoporous structure, specific surface area, pore volume, and morphology of the MesoCS nanoparticles were analyzed. The apatite mineralization ability, in vitro odontogenic differentiation, drug delivery, and antibacterial properties of the MesoCS nanoparticles were further investigated. RESULTS: The results indicate that the 200-nm-sized MesoCS nanoparticles synthesized using a facile template method exhibited a high specific surface area and pore volume with internal mesopores (average pore size = 3.05 nm). Furthermore, the MesoCS nanoparticles can be used as drug carriers to maintain sustained release of gentamicin and fibroblast growth factor-2 (FGF-2). The MesoCS-loaded FGF-2 might stimulate more odontogenic-related protein than CS because of the FGF-2 release. CONCLUSIONS: Based on this work, it can be inferred that MesoCS nanoparticles are potentially useful endodontic materials for biocompatible and osteogenic dental pulp tissue regenerative materials.