Facile Modification of Medical-Grade Silicone for Antimicrobial Effectiveness and Biocompatibility: A Potential Therapeutic Strategy against Bacterial Biofilms.

A one-step modification of biomedical silicone tubing with N,N-dimethyltetradecylamine, C14, results in a composition designated WinGard-1 (WG-1, 1.1 wt % C14). A surface-active silicon-amine phase (SAP) is proposed to account for increased wettability and increased surface charge. To understand the mechanism of antimicrobial effectiveness, several procedures were employed to detect whether C14 leaching occurred. An immersion-growth (IG) test was developed that required knowing the bacterial Minimum Inhibitory Concentrations (MICs) and Minimum Biocidal Concentrations (MBCs). The C14 MIC and MBC for Gm- uropathogenic E. coli (UPEC), commonly associated with catheter-associated urinary tract infections (CAUTI), were 10 and 20 µg/mL, respectively. After prior immersion of WG-1 silicone segments in a growth medium from 1 to 28 d, the IG test for the medium showed normal growth for UPEC over 24 h, indicating that the concentration of C14 must be less than the MIC, 10 µg/mL. GC-MS and studies of the medium inside and outside a dialysis bag containing WG-1 silicone segments supported de minimis leaching. Consequently, a 5 log UPEC reduction (99.999% kill) in 24 h using the shake flask test (ASTM E2149) cannot be due to leaching and is ascribed to contact kill. Interestingly, although the MBC was greater than 100 µg/mL for Pseudomonas aeruginosa, WG-1 silicone affected an 80% reduction via a 24 h shake flask test. For other bacteria and Candida albicans, greater than 99.9% shake flask kill may be understood by proposing increased wettability and concentration of charge illustrated in the TOC. De minimis leaching places WG-1 silicone at an advantage over conventional anti-infectives that rely on leaching of an antibiotic or heavy metals such as silver. The facile process for preparation of WG-1 silicone combined with biocidal effectiveness comprises progress toward the goals of device designation from the FDA for WG-1 and clearance.

Icephobic, Pt-Cured, Polydimethylsiloxane Nanocomposite Coatings.

To explore novel coatings with potential for easy release of ice (icephobicity), a series of platinum-cured silicone coatings was prepared incorporating SYL-OFF 7210, designated MQ-R, as a nanoscale reinforcing component. These optically transparent coatings are designated according to cure temperature and MQ-R wt %, for example, Pt-PDMS(25)-20 for 25 °C cure and 20 wt % MQ-R. Surface characterization included dynamic contact angles and morphology by atomic force microscopy. Bulk characterization was accomplished with stress-strain measurements at 25 °C and dynamic mechanical analysis from -110 to 150 °C. Ice adhesion tests at -10 °C showed modulus had a dominant effect in increasing τice, the peak removal force. At -30 °C, storage modulus was greater for coatings cured at 100 °C compared to 25 °C, but ice removal tests at -30 °C (-22 °F) consistently showed τice for Pt-PDMS(100) MQ-R compositions was less than τice for corresponding Pt-PDMS(25) coatings. This unexpected result was explained by proposing that supercooled water at hydrophilic interfacial sites (-10 °C) does not impede ice removal but frozen water pins ice at -30 °C. Interestingly, MQ-R was found to be a reactive filler that increased modulus after 100 °C cure especially for Pt-PDMS(100)-30 (3 MPa) and Pt-PDMS(100)-40 (5 MPa). In summary, by virtue of resistance to ice adhesion Pt(PDMS) coatings with low MQ-R content have potential for conferring energy savings and safety while high MQ-R content results in noteworthy mechanical properties.

PEAMOtecan, a novel chronotherapeutic polymeric drug for brain cancer.

Glioblastoma multiforme (GBM) is an aggressive and difficult to treat form of brain cancer. In this work, we report on a novel chronotherapeutic polymeric drug, PEAMOtecan, for GBM therapy. PEAMOtecan was synthesized by conjugating camptothecin, a topoisomerase I inhibitor, to our proprietary, 'clickable' and modular polyoxetane polymer platform consisting of acetylene-functionalized 3-ethyl-3-(hydroxymethyl)oxetane (EAMO) repeat units (Patent No.: US 9,421,276) via the linker 3,3'-dithiodipropionic acid (DDPA) with a disulfide bond (SS) extended by short-chain polyethylene glycol (PEG). We show that PEAMOtecan is a highly modular polymer nanoformulation that protects covalently bound CPT until slowly being released over extended periods of time dependent on the cleavage of the disulfide and ester linkages. PEAMOtecan kills glioma cells by mitotic catastrophe with p53 mutant/knockdown cells being more sensitive than matched wild type cells potentially providing cancer-specific targeting. To establish proof-of-principle therapeutic effects, we tested PEAMOtecan as monotherapy for efficacy in a mouse orthotopic glioma model. PEAMOtecan was administered by one-time, convection-enhanced delivery (CED) intra-tumorally to achieve superior distribution and extended drug release over time. In addition, the near-infrared (NIR) dye Cy5.5 was coupled to the polymer providing live-animal imaging capability to track tissue distribution and clearance of the injected polymer over time. We show that PEAMOtecan significantly improves the survival of mice harboring intra-cranial tumors (p = .0074 compared to untreated group). Altogether, these results support further development and testing of our nanoconjugate platform.

Surface Characterization, Antimicrobial Effectiveness, and Human Cell Response for a Biomedical Grade Polyurethane Blended with a Mixed Soft Block PTMO-Quat/PEG Copolyoxetane Polyurethane.

Infection is a serious medical complication associated with health care environments. Despite advances, the 5-10% incidence of infections for hospital patients is well documented. Sources of pathogenic organisms include medical devices such as catheters and endotracheal tubes. Offering guidance for curbing the spread of such infections, a model antimicrobial coating is described herein that kills bacteria on contact but is compatible with human cells. To achieve these characteristics, a novel blend of a conventional biomedical grade polyurethane (Tecoflex) with mixed soft block polyurethane is described. The functional polyurethane (UP-C12-50-T) has a copolyoxetane soft block P-C12-50 with quaternary ammonium (C12) and PEG-like side chains and a conventional poly(tetramethylene oxide) (PTMO, T) soft block. DSC and DMA data point to limited miscibility of UP-C12-50-T with Tecoflex. The blend of Tecoflex with 10 wt % UP-C12-50-T designated UP-C12-50-T-10 radically changed surface properties. Evidence for surface concentration of the P-C12-50 soft block was obtained by atomic force microscopy (AFM), dynamic contact angles (DCAs), zeta potentials (ζ), and X-ray photoelectron spectroscopy (XPS). The antimicrobial effectiveness of the blend coatings was established by the ASTM E2149 "shake flask" test for challenges of E. coli and a methicillin resistant strain of S. epidermidis. Cytocompatibility was demonstrated with an in vitro test designed for direct contact (ISO 10993-5). Growth of human mesenchymal stem cells (MSCs) beside and under UP-C12-50-T-10 indicated remarkable biocompatibility for a composition that is also strongly antimicrobial. Overall, the results point to a model coating with a level of P-C12-50 that combines high antimicrobial effectiveness and low toxicity to human cells.

"Big Dipper" Dynamic Contact Angle Curves for Pt-Cured Poly(dimethylsiloxane) on a Thermal Gradient: Inter-relationships of Hydrosilylation, Si-H Autoxidation, and Si-OH Condensation to a Secondary Network.

Platinum cure for poly(dimethylsiloxane) (PDMS) coatings on a thermal gradient (45-140 °C) was carried out to study the effect of temperature on surface chemistry and wetting behavior. The motivation is the interest in surfaces with continuous gradients in wettability for applications such as protein adsorption, controlling bacterial adhesion, directional movement of cells, and biosensors. The Wilhelmy plate method and the advancing/receding drop method were employed for determining the positional dependence of θA and θR. A strong dependence of receding contact angles (θR) on cure temperature was found for Sylgard 184 (S-PDMS) and a Pt-cured laboratory-prepared analogue (Pt-PDMS) of known composition. Cure on the thermal gradient gave rise to striking "Big Dipper" Wilhelmy plate dynamic contact angle curves. High contact angle hysteresis (60-80°) was found for 45 °C cure (CAH = Î¸Δ = θA - θR) but low CAH for 140 °C cure (10-20°). Drop addition/withdrawal using goniometry identified a similar trend. Attenuated total reflectance infrared spectroscopy showed absorptions for Si-OH (3500 cm-1) and Si-H (1250 cm-1) that were correlated with wetting behavior and near-surface chemistry. These studies revealed a complex relationship among hydrosilylation, Si-H autoxidation, and condensation of Si-OH. A model for advancing from a single network due to hydrosilylation to a double network for hydrosilylation plus Si-O-Si from condensation of Si-OH best explains evidence from spectroscopic and contact angle studies. These results are relevant to interactions of Pt-cured silicones at bio-interfaces, as receding contact angles determine work of adhesion, as well as applications that benefit from maximum hydrophobicity and minimizing water roll-off angles.

A Polycation Antimicrobial Peptide Mimic without Resistance Buildup against Propionibacterium Acnes.

A preliminary study is reported for a polycation antimicrobial peptide (AMP) mimic against Propionibacterium acnes, which is associated with acne vulgaris, a common skin condition. Antibiotics are commonly used against P. acnes but buildup of resistance is well-known. Worse, antibiotic regimens build up resistance for more sensitive bacteria such as Staphylococcus epidermidis. The polycation AMP mimic C12-50, 1, is chosen for the present study as it has been previously shown to have high antimicrobial effectiveness. This study reports that C12-50 is active against P. acnes (strain ATCC 6919) with a minimum inhibitory concentration (MIC) of 6.3 µg mL-1 . To monitor resistance build-up ten passages are conducted with C12-50 against P. acnes. The MIC remains constant with no resistance buildup. Parallel studies with erythromycin confirm previously reported resistance buildup. The results point to a promising pathway to applications for polycation AMP mimics against P. acnes.

Base Layer Influence on Protonated Aminosilane Gradient Wettability.

Protonated amine gradients have been prepared on silicon wafers via programmed controlled rate infusion (CRI) with varying degrees of hydrophobicity and characterized by X-ray photoelectron spectroscopy (XPS) and static and Wilhelmy plate dynamic contact angle measurements. Initially, base layers were spin coated from sols containing tetramethoxysilane (TMOS) and either phenyltrimethoxysilane (PTMOS), dimethyldimethoxysilane (DMDMOS), or octyltrimethoxysilane (OTMOS, C8). Amine gradients were then prepared from 3-aminopropyltriethoxysilane (APTEOS) via CRI. Gradients were exposed to concentrated HCl vapor for amine protonation. XPS showed that NH2 functional groups were distributed in a gradient fashion as a result of CRI controlling the time of exposure to APTEOS. Interestingly, the overall extent of N modification depended on the type of base layer used for gradient formation. The C8-derived base layer had about half the amount of nitrogen on the surface as compared to those prepared from TMOS, which was attributed to a reduction in the number and accessibility of surface silanol groups. The wettability and contact angle (CA) hysteresis were also dependent on the base layer and varied along the length of the gradient. The greatest CA change across the length of the gradient was observed on the gradient formed on the C8-derived base layer. Likewise, the CA hysteresis was approximately 2 times larger on the C8-modified surfaces, indicative of greater chemical inhomogeneity. In contrast to uniformly modified substrates, Wilhelmy plate CA analysis that involves the immersion of samples gave a unique S-shaped CA distance curve for the gradients. The three curve segments correspond to hydrophilic, hydrophobic, and a middle connecting region. Importantly, these curves give precise CAs along the gradient that reflect the surface chemistry and coverage defined by programmed CRI processing.

Oil-Infused Superhydrophobic Silicone Material for Low Ice Adhesion with Long-Term Infusion Stability.

A new approach for anti-icing materials was created to combat the effects of ice accretion and adhesion. The concept combines the strengths of individual characteristics for low ice adhesion based on elasticity, superhydrophobicity, and slippery liquid infused porous surfaces (SLIPS) for an optimal combination of high water repellency and ice-phobicity. This was achieved by replicating microtextures from a laser-irradiated aluminum substrate to an oil-infused polydimethylsiloxane (PDMS) elastomer, the result of which is a flexible, superhydrophobic, and lubricated material. This design provides multiple strategies of icing protection through high water repellency to retard ice accretion and with elasticity and oil infusion for low ice adhesion in a single material. Studies showed that an infusion of silicone oils with viscosity at 100 cSt and below 8 wt % in PDMS solution is sufficient to reduce the ice shear strength to an average of 38 kPa while maintaining contact angles and roll-off angles of above 150° and below 10°, respectively. This ice-adhesion value is a ∼95% reduction from a bare aluminum surface and ∼30% reduction from a microtextured, superhydrophobic PDMS material without oil infusion. In addition, three-month aging studies showed that the wetting and ice-adhesion performance of this material did not significantly degrade.

Sticky or Slippery Wetting: Network Formation Conditions Can Provide a One-Way Street for Water Flow on Platinum-cured Silicone.

In the course of studies on Sylgard 184 (S-PDMS), we discovered strong effects on receding contact angles (CAs), θrec, while cure conditions have little effect on advancing CAs. Network formation at high temperatures resulted in high θadv of 115-120° and high θrec ≥ 80°. After network formation at low temperatures (≤25 °C), θadv was still high but θrec was 30-50°. Uncertainty about compositional effects on wetting behavior resulted in similar experiments with a model D(V)D(H) silicone elastomer (Pt-PDMS) composed of a vinyl-terminated poly(dimethylsiloxane) (PDMS) base and a polymeric hydromethylsilane cross-linker. Again, network formation at high temperature (∼100 °C) resulted in high CAs, while low-temperature curing retained high advancing CAs but gave low receding CAs (θrec 30-50°). These changes in receding CAs translate to strong effects on water adhesion, wp, which is the actual work required to separate a liquid (water) from a surface: wp ∝ (1 + θrec). When the values θrec 84° for high-temperature and θrec 50° for low-temperature network formation are used, wp is ∼1.5 times higher for curing at low temperature. The origin of low receding contact angles was investigated by attenuated total reflectance IR spectroscopy. Absorptions for Si-OH hydrogen-bonded to water (3350 cm(-1)) were stronger for low- versus high-temperature curing. This result is attributed to faster hydrosilylation during curing at higher temperatures that consumes Si-H before autoxidation to Si-OH. Sharp bands at 3750 and 3690 cm(-1) due to isolated -Si-OH are more prominent for Pt-PDMS than those for S-PDMS, which may be due to an effect of functionalized nanofiller. To explore the impact of wp on water droplet flow, gradient coatings of S-PDMS and Pt-PDMS elastomers were prepared by coating a slide, maintaining opposite ends at high and low temperatures and thus forming a thermal gradient. When the slide was tilted, a droplet moved easily on the high-temperature end (slippery surface) but became pinned at the low-temperature end (sticky surface) and did not move when the slide was rotated 180°. The surface was therefore a "one-way street" for water droplet flow. Theory provides fundamental understanding for slippery/sticky behavior for gradient S-PDMS and Pt-PDMS coatings. A model for network formation is based on hydrosilylation at high temperature and condensation curing of Si-OH from autoxidation of Si-H at low temperatures. In summary, network formation conditions strongly affect receding contact angles and water adhesion for Sylgard 184 and the filler-free mimic Pt-PDMS. These findings suggest careful control of curing conditions is important to silicones used in microfluidic devices or as biomedical materials. Network-forming conditions also impact bulk mechanical properties for Sylgard 184, but the range that can be obtained has not been critically examined for specific applications.

Cooperative Effects in Aligned and Opposed Multicomponent Charge Gradients Containing Strongly Acidic, Weakly Acidic, and Basic Functional Groups.

Bifunctionalized surface charge gradients in which the individual component gradients either align with or oppose each other have been prepared. The multicomponent gradients contain strongly acidic, weakly acidic, and basic functionalities that cooperatively interact to define surface wettability, nanoparticle binding, and surface charge. The two-step process for gradient formation begins by modifying a siloxane coated silicon wafer in a spatially dependent fashion first with an aminoalkoxysilane and then with a mercapto-functionalized alkoxysilane. Immersion in hydrogen peroxide leads to oxidation of the surface immobilized sulfhydryl groups and subsequent protonation of the surface immobilized amines. Very different surface chemistries were obtained from gradients that either align with or oppose each other. X-ray photoelectron spectroscopy (XPS) data show that the degree of amine group protonation depends on the local concentration of sulfonate groups, which form ion pairs with the resulting ammonium ions. Contact angle measurements show that these ion pairs greatly enhance the wettability of the gradient surface. Finally, studies of colloidal gold binding show that the presence of both amine and thiol moieties enhance colloid binding, which is also influenced by surface charge. Cooperativity is also revealed in the distribution of charges on uniform samples used as models of the gradient surfaces, as evaluated via zeta potential measurements. Most significantly, the net surface charge and how it changes with distance and solution pH strongly depend on whether the gradients in amine and thiol align or oppose each other. The aligned multicomponent gradients show the most interesting behavior in that there appears to be a point at pH ∼ 6.5 where surface charge remains constant with distance. Setting the pH above or below this transition point leads to changes in the direction of charge variation along the length of the substrate.

Real-Time Observation of Antimicrobial Polycation Effects on Escherichia coli: Adapting the Carpet Model for Membrane Disruption to Quaternary Copolyoxetanes.

Real-time atomic force microscopy (AFM) was used for analyzing effects of the antimicrobial polycation copolyoxetane P[(C12)-(ME2Ox)-50/50], C12-50 on the membrane of a model bacterium, Escherichia coli (ATCC# 35218). AFM imaging showed cell membrane changes with increasing C12-50 concentration and time including nanopore formation and bulges associated with outer bacterial membrane disruption. A macroscale bactericidal concentration study for C12-50 showed a 4 log kill at 15 µg/mL with conditions paralleling imaging (1 h, 1x PBS, physiological pH, 25 °C). The dramatic changes from the control image to 1 h after introducing 15 µg/mL C12-50 are therefore reasonably attributed to cell death. At the highest concentration (60 µg/mL) further cell membrane disruption results in leakage of cytoplasm driven by detergent-like action. The sequence of processes for initial membrane disruption by the synthetic polycation C12-50 follows the carpet model posited for antimicrobial peptides (AMPs). However, the nanoscale details are distinctly different as C12-50 is a synthetic, water-soluble copolycation that is best modeled as a random coil. In a complementary AFM study, chemical force microscopy shows that incubating cells with C12-50 decreased the hydrophobicity across the entire cell surface at an early stage. This finding provides additional evidence indicating that C12-50 polycations initially bind with the cell membrane in a carpet-like fashion. Taken together, real time AFM imaging elucidates the mechanism of antimicrobial action for copolyoxetane C12-50 at the single cell level. In future work this approach will provide important insights into structure-property relationships and improved antimicrobial effectiveness for synthetic amphiphilic polycations.

Thickness dependence of ice removal stress for a polydimethylsiloxane nanocomposite: Sylgard 184.

Minimizing adhesion of ice has been the subject of extensive studies because of importance to applications such aircraft wings, spacecraft, and power transmission wires. A growing interest concerns coatings for wind turbine blades and refrigeration. Herein, a new laboratory test was employed to obtain the thickness dependence of ice adhesion for Sylgard 184-a filled polydimethylsiloxane elastomer. A correlation between ice adhesion and coating thickness (t) was found that follows a relationship developed by Kendall over 40 years ago for removal of a rigid object from an elastomer. With a 0.05 mm/s probe speed a nearly linear relationship between peak removal stress (Ps) and 1/t(1/2) was obtained with Ps ∼ 460 kPa for an 18 µm coating, decreasing to ∼120 kPa for 533 µm. Preliminary results suggest that below ∼10 µm Ps departs from the 1/t(1/2) correlation while above ∼500 µm a limiting value for Ps may be reached. We previously reported that probe speed has negligible effect on the glassy polymer PMMA. In contrast, probe speed is identified as an important variable for testing ice release on elastomeric Sylgard 184 coatings. While work of adhesion, which is related to surface free energy, is recognized as an important factor that can affect ice release, the results reported herein show that coating thickness can override this single parameter for elastomeric substrates.

Integrated compositional and nanomechanical analysis of a polyurethane surface modified with a fluorous oxetane siliceous-network hybrid.

Investigating the surface characteristics of heterogeneous polymer systems is important for understanding how to better tailor surfaces and engineering specific reactions and desirable properties. Here we report on the surface properties for a blend consisting of a major component, a linear polyurethane or thermoplastic elastomer (TPU), and a minor component that is a hybrid network. The hybrid network consists of a fluorous polyoxetane soft block and a hydrolysis/condensation inorganic (HyCoin) network. Phase separation during coating formation results in surface concentration of the minor fluorous hybrid domain. The TPU is H12MDI/BD(50)-PTMO-1000 derived from bis(cyclohexylmethylene)-diisocyanate and butane diol (50 wt %) and poly(tetramethylene oxide). Surface modification results from a novel network-forming hybrid composed of poly(trifluoroethoxymethyl-methyl oxetane) diol) (3F) as the fluorous moiety end-capped with 3-isocyanatopropylriethoxysilane and bis(triethoxysilyl)ethane (BTESE) as a siliceous stabilizer. We use an integrated approach that combines elemental analysis of the near surface via X-ray photoelectron microscopy with surface mapping using atomic force microscopy that presents topographical and phase imaging along with nanomechanical properties. Overall, this versatile, high-resolution approach enabled unique insight into surface composition and morphology that led to a model of heterogeneous surfaces containing a range of constituents and properties.

High antimicrobial effectiveness with low hemolytic and cytotoxic activity for PEG/quaternary copolyoxetanes.

The alkyl chain length of quaternary ammonium/PEG copolyoxetanes has been varied to discern effects on solution antimicrobial efficacy, hemolytic activity and cytotoxicity. Monomers 3-((4-bromobutoxy)methyl)-3-methyloxetane (BBOx) and 3-((2-(2-methoxyethoxy)ethoxy)methyl)-3-methyloxetane (ME2Ox) were used to prepare precursor P[(BBOx)(ME2Ox)-50:50-4 kDa] copolyoxetane via cationic ring opening polymerization. The 1:1 copolymer composition and Mn (4 kDa) were confirmed by (1)H NMR spectroscopy. After C-Br substitution by a series of tertiary amines, ionic liquid Cx-50 copolyoxetanes were obtained, where 50 is the mole percent of quaternary repeat units and "x" is quaternary alkyl chain length (2, 6, 8, 10, 12, 14, or 16 carbons). Modulated differential scanning calorimetry (MDSC) studies showed Tgs between -40 and -60 °C and melting endotherms for C14-50 and C16-50. Minimum inhibitory concentrations (MIC) were determined for Escherichia coli , Staphylococcus aureus , and Pseudomonas aeruginosa . A systematic dependence of MIC on alkyl chain length was found. The most effective antimicrobials were in the C6-50 to C12-50 range. C8-50 had better overall performance with MICs of 4 µg/mL, E. coli ; 2 µg/mL, S. aureus ; and 24 µg/mL, P. aeruginosa . At 5 × MIC, C8-50 effected >99% kill in 1 h against S. aureus , E. coli , and P. aeruginosa challenges of 10(8) cfu/mL; log reductions (1 h) were 7, 3, and 5, respectively. To provide additional insight into polycation interactions with bacterial membranes, a geometric model based on the dimensions of E. coli is described that provides an estimate of the maximum number of polycations that can chemisorb. Chain dimensions were estimated for polycation C8-50 with a molecular weight of 5 kDa. Considering the approximations for polycation chemisorption (PCC), it is surprising that a calculation based on geometric considerations gives a C8-50 concentration within a factor of 2 of the MIC, 4.0 (±1.2) µg/mL for E. coli . Cx-50 copolyoxetane cytotoxicity was low for human red blood cells, human dermal fibroblasts (HDF), and human foreskin fibroblasts (HFF). Selectivities for bacterial kill over cell lysis were among the highest ever reported for polycations indicating good prospects for biocompatibility.

Laboratory test for ice adhesion strength using commercial instrumentation.

A laboratory test method for evaluating ice adhesion has been developed employing a commercially available instrument normally used for dynamic mechanical analysis (TA RSA-III). This is the first laboratory ice adhesion test that does not require a custom-built apparatus. The upper grip range of ∼10 mm is an enabling feature that is essential for the test. The method involves removal of an ice cylinder from a polymer coating with a probe and the determination of peak removal force (Ps). To validate the test method, the strength of ice adhesion was determined for a prototypical glassy polymer, poly(methyl methacrylate). The distance of the probe from the PMMA surface has been identified as a critical variable for Ps. The new test provides a readily available platform for investigating fundamental surface characteristics affecting ice adhesion. In addition to the ice release test, PMMA coatings were characterized using DSC, DCA, and TM-AFM.

Poly (ethylene glycol)-armed hyperbranched polyoxetanes for anticancer drug delivery.

A facile method for synthesis of polyethylene glycol (PEG)-armed hyperbranched polyoxetanes is presented as well as characterization and use in drug delivery. A series of hyperbranched polyoxetanes with multiple PEG arms were synthesized via a one-pot cationic ring-opening polymerization of 3-ethyl-3-hydroxymethyloxetane (EHMO) and its PEGylated derivative (EPMO), in which the feed mass ratio of EHMO to EPMO was 98:2, 96:4, 74:26, or 17:83. Characterization methods included NMR, DLS, FT-IR, DSC, and SEM. Toxicity of the synthesized polymers to human dermal fibroblasts was evaluated using the MTT assay. Formulation into particles was carried out to encapsulate the anticancer drug camptothecin using the single oil-in-water (o/w) solvent evaporation method. The resulting drug encapsulated particles were evaluated for antitumor activity using HN12 cells.

Synthesis of water-soluble camptothecin-polyoxetane conjugates via click chemistry.

Water-soluble camptothecin (CPT)-polyoxetane conjugates were synthesized using a clickable polymeric platform P(EAMO) that was made by polymerization of acetylene-functionalized 3-ethyl-3-(hydroxymethyl)oxetane (i.e., EAMO). CPT was first modified with a linker 6-azidohexanoic acid via an ester linkage to yield CPT-azide. CPT-azide was then click coupled to P(EAMO) in dichloromethane using bromotris(triphenylphosphine)copper(I)/N,N-diisopropylethylamine. For water solubility and cytocompatibility improvement, methoxypolyethylene glycol azide (mPEG-azide) was synthesized from mPEG 750 g mol(-1) and click grafted using copper(II) sulfate and sodium ascorbate to P(EAMO)-g-CPT. (1)H NMR spectroscopy confirmed synthesis of all intermediates and the final product P(EAMO)-g-CPT/PEG. CPT was found to retain its therapeutically active lactone form. The resulting P(EAMO)-g-CPT/PEG conjugates were water-soluble and produced dose-dependent cytotoxicity to human glioma cells and increased γ-H2AX foci formation, indicating extensive cell cycle-dependent DNA damage. Altogether, we have synthesized CPT-polymer conjugates able to induce controlled toxicity to human cancer cells.

A Polyurethane Surface Modifier: Contrasting Amphiphilic and Contraphilic Surfaces Driven by block and random Soft Blocks having Trifluoroethoxymethyl and PEG Side Chains.

A conventional MDI-BD-PTMO polyurethane was modified using 2 wt.% polyurethanes (U) having copolyoxetane soft blocks with hydrophobic 3F, CF3CH2OCH2- and hydrophilic MEn, CH3O(CH2CH2O)nCH2-, n = 3, 7) side chains. In contrast to neat 3F-co-MEn-U, 2 wt.% 3F-co-MEn-U compositions have physically stable morphologies and wetting behavior. Surface composition (XPS) and amphiphilic or contraphilic wetting are controlled by the 3F-co-MEn polyoxetane soft block architecture and MEn side chain length. Importantly, θrec can be tuned for 2 wt.% 3F-co-MEn-U compositions independent of swelling, which is controlled by the bulk polyurethane. AFM imaging led to a new morphological model whereby fluorous/PEG-hard block nano-aggregates combine to form near surface features culminating in micron scale texturing.

Highly effective, water-soluble, hemocompatible 1,3-propylene oxide-based antimicrobials: poly[(3,3-quaternary/PEG)-copolyoxetanes].

This study focuses on the solution antimicrobial effectiveness of a novel class of copolyoxetanes with quaternary ammonium and PEG-like side chains. A precursor P[(BBOx-m)(ME2Ox)] copolyoxetane was prepared by cationic ring-opening copolymerization of 3-((4-bromobutoxy)methyl)-3-methyloxetane (BBOx) and 3-((2-(2-methoxyethoxy)ethoxy)methyl)-3-methyloxetane (ME2Ox) to give random copolymers with 14-100 (m) mol % BBOx. Reaction of P[(BBOx-m)(ME2Ox)] with dodecyl dimethylamine gave the corresponding quaternary P[(C12-m)(ME2Ox)] polycation salts, designated C12-m, as viscous liquids in 100% yield. BBOx/ME2Ox and C12/ME2Ox ratios were obtained by (1)H NMR spectroscopy. C12-m molecular weights (M(n), 3.5-21.9 kDa) were obtained from (1)H NMR end group analysis. DSC studies up to 150 °C showed only thermal transitions between -69 and -34 °C assigned to T(g) values. Antibacterial activity for the C12-m copolyoxetanes was tested by determining minimum inhibitory concentrations (MICs) against Gram(+) Staphylococcus aureus and Gram(-) Escherichia coli and Pseudomonas aeruginosa . MIC decreased with increasing C12 mol percent, reaching a minimum in the range C12-43 to C12-60. Overall, the antimicrobial with consistently low MICs for the three tested pathogenic bacteria was C12-43: (bacteria, MIC, µg/mL) E. coli (6), S. aureus (5), and P. aeruginosa (33). For C12-43, minimum biocidal concentration (MBC) to reach 99.99% kill in 24 h required 1.5× MIC for S. aureus and 2× MIC for E. coli and P. aeruginosa . At 5× MIC against a challenge of 10(8) cfu/mL, C12-43 kills ≥99% S. aureus , E. coli , and P. aeruginosa within 1 h. C12-m copolyoxetane cytotoxicity toward human red blood cells was low, indicating good prospects for biocompatibility. The tunability of C12-m copolyoxetane compositions, effective antimicrobial behavior against Gram(+) and Gram(-) bacteria, and promising biocompatibility offer opportunities for further modification and potential applications as therapeutic agents.

Wetting behavior of polymer coated nanoporous anodic alumina films: transition from super-hydrophilicity to super-hydrophobicity.

We show that nanoporous anodic alumina films, with pore diameters in the range 10-80 nm, can be transformed from being very hydrophilic (or super-hydrophilic) to very hydrophobic (or super-hydrophobic) by coating the surface with a thin (2-3 nm) layer of a hydrophobic polymer. This dramatic transformation happens as a result of the interplay between surface morphology and surface chemistry. The coated surfaces exhibit 'sticky' hydrophobicity as a result of ingress of water into the pores by capillary action. The wetting parameters (contact angle and contact angle hysteresis) exhibit qualitatively different dependences on pore diameters in coated and uncoated films, which are explained by invoking appropriate models for wetting.