ABSTRACT
We experimentally demonstrate a liquid crystal (LC)-integrated EIT metasurface for active THz polarization conversion and asymmetric transmission. By controlling the LC orientation under static magnetic field anchoring and an adjustable electric field, the device realizes the active control from the OFF state to the ON state, corresponding to the orthogonal polarization excitation modes of the EIT metasurface. Furthermore, based on the different polarization responses at forward and backward incidences, we achieve asymmetric transmission at the EIT peak and two nearby resonances, with its isolation actively manipulated by the external electric field. This study on dynamic polarization conversion and asymmetric transmission by a LC-integrated metasurface offers a promising route for active THz devices, applicable to THz communication, switching, and sensing systems.
ABSTRACT
Hydrogen plays an important role in the corrosion of zirconium alloys, and the degree of influence highly depends on the alloy composition and conditions. In this work, the effects of hydrogenation on the corrosion behavior of Zircaloy-4 in water containing 3.5 ppm Li + 1000 ppm B at 360 °C/18.6 MPa were investigated. The results revealed that hydrogenation can shorten the corrosion transition time and increase the corrosion rates of Zircaloy-4. The higher corrosion rates can be ascribed to the larger stress in the oxide film of hydrogenated samples, which can accelerate the evolution of the microstructure of the oxide film. In addition, we also found that hydrogenation has little effect on the t-ZrO2 content in the oxide film and there is no direct correspondence between the t-ZrO2 content and the corrosion resistance of the Zircaloy-4.
ABSTRACT
@#The standardized workflow of computer-aided static guided implant surgery includes preoperative examination, data acquisition, guide design, guide fabrication and surgery. Errors may occur at each step, leading to irreversible cumulative effects and thus impacting the accuracy of implant placement. However, clinicians tend to focus on factors causing errors in surgical operations, ignoring the possibility of irreversible errors in nonstandard guided surgery. Based on the clinical practice of domestic experts and research progress at home and abroad, this paper summarizes the sources of errors in guided implant surgery from the perspectives of preoperative inspection, data collection, guide designing and manufacturing and describes strategies to resolve errors so as to gain expert consensus. Consensus recommendation: 1. Preoperative considerations: the appropriate implant guide type should be selected according to the patient's oral condition before surgery, and a retaining screw-assisted support guide should be selected if necessary. 2. Data acquisition should be standardized as much as possible, including beam CT and extraoral scanning. CBCT performed with the patient’s head fixed and with a small field of view is recommended. For patients with metal prostheses inside the mouth, a registration marker guide should be used, and the ambient temperature and light of the external oral scanner should be reasonably controlled. 3. Optimization of computer-aided design: it is recommended to select a handle-guided planting system and a closed metal sleeve and to register images by overlapping markers. Properly designing the retaining screws, extending the support structure of the guide plate and increasing the length of the guide section are methods to feasibly reduce the incidence of surgical errors. 4. Improving computer-aided production: it is also crucial to set the best printing parameters according to different printing technologies and to choose the most appropriate postprocessing procedures.
ABSTRACT
Tailings resulting from mining and smelting activities may cause soil heavy-metal pollution and harm human health. To evaluate the environmental impact of heavy metals from tailings on farmland soils in the surrounding area, heavy metals (As, Cd, Cr, Cu, Ni, Pb, and Zn) in tailings and farmland soils in the vicinity of a typical copper tailings pond were analyzed. Contamination status, potential sources, and health risks for farmland soils were investigated. The results showed that the tailings contained a high concentration of Cu (1136.23 mg/kg). The concentrations of Cd and Cu in the farmland soils exceeded the soil quality standard. The geoaccumulation index (Igeo) indicated that the soils were moderately polluted by Cu and Cd, and slightly polluted by Ni, Cr, and Zn. The absolute principal component scores-multiple linear regression (APCS-MLR) model was applied for source apportionment. The results showed that tailings release is the main source of soil heavy-metals contamination, accounting for 35.81%, followed by agricultural activities (19.41%) and traffic emission (16.31%). The health risk assessment suggested that the children in the study region were exposed to non-carcinogenic risks caused by As, while the non-carcinogenic risk to adults and the carcinogenic risk to both adults and children were at acceptable levels. It is necessary to take effective measures to control heavy-metal contamination from tailings releases to protect humans, especially children, from adverse health risks.
Subject(s)
Metals, Heavy , Soil Pollutants , Child , Adult , Humans , Soil , Copper , Soil Pollutants/analysis , Farms , Ponds , Cadmium , Environmental Monitoring , Metals, Heavy/analysis , Risk Assessment , ChinaABSTRACT
In this paper, we demonstrate an intensity-tunable THz bandpass filter by introducing liquid crystal (LC) integrated with asymmetric frequency selective surface (FSS) and subwavelength metal gratings. Here, the tunable THz filter is derived from the inner polarization state conversion in composited devices, and the incident linear polarization can be converted into 90° orthogonal components. By controlling the LC orientation under the applied electric field with the metamaterial electrodes, the polarization conversion process can be actively modulated; thus, the polarization-dependent and tunable THz bandpass filter is achieved. Based on the multilayer design and the inner Fabry-Perot-like resonance mechanism, the LC-integrated metamaterials filter presents better filtering performance than the single FSS filter, and the Q-value is improved from 7.7 to 13.8 at the working frequency. Our simulated work paves the way for the design of new and efficient THz filters.
ABSTRACT
Herein, we fabricated and investigated the carbon nanotube (CNT) integrated metamaterial for orthogonal polarization control in the THz regime, which is composed of a sandwiched CNT layer with the adjacent metal gratings in the sub-wavelength integration. Under the mechanism of multilayer polarization selection and multiple reflections in CNT constructed micro-cavity, the perfect orthogonal polarization conversion is achieved and the transmittance spectrum presents multi-band peaks and valleys, which coincide with the theoretical Fabry-Perot resonance. Besides, by controlling the layer number and orientations of the middle CNT, the active modulation of the amplitude and phase in compound metamaterials are realized. Based on the simulation of CNT in the grating model, it obtains a good agreement with the experimental results, and the simulated electric field distribution also confirmed the inner polarization conversion mechanism. This work combines nanomaterials with optical microstructures and successfully applies them to the THz polarization control, which will bring new ideas for design novel THz devices.
ABSTRACT
In this work, a three-dimensional (3D) porous MXene/GO foam (MGOF) was successfully synthesized and exhibited an excellent terahertz stealth property covering a whole measurement frequency of 0.2-2.0 THz. This is due to the ingenious assembly of two functional two-dimensional materials that have different advantages. The multiscale micro-nanostructure constructed with the 3D porous MGOF can effectively increase the terahertz scattering and refraction. Furthermore, MXene sheets with high conductivity can enhance the responsiveness to the terahertz wave. By adjusting the content of MXene in the MGOF, it exhibits a maximum reflection loss (RL) of 37 dB with a 100% qualified frequency bandwidth (RL > 10 dB), which is the most outstanding result in the available reference. In addition, the optimal average terahertz RL values of MGOF were up to 30.6 dB, which is 100% higher than the best data presented in previous work. Benefitting from an ultralow density, a high RL value, and a wide bandwidth, the maximum specific average terahertz absorption performance can reach 4.6 × 104 dB g-1 cm3, which is more than 4000 times that of other materials. In addition, the regulation of the terahertz absorption property through microstructure and morphology control is reported for the first time.
ABSTRACT
We experimentally demonstrate an active terahertz (THz) resonance switch induced by the polarization conversion in a compound metasurface, which is a LC layer sandwiched by a metallic wire grating and resonance metamaterial (LCGM). Here, the liquid crystal (LC) plays the role of polarization conversion, which can induce the TE resonance. Moreover, there exists a localized resonance between metallic grating and metamaterial layers, and then the excited resonance will be greatly enhanced. The results show that the high extinction ratio of the resonance switch exceeds 30 dB at 0.82 THz. This work will bring new ideas for the research in developing THz phase, polarization, and switch devices with LC and metasurface.
ABSTRACT
Ferromagnetic liquid crystals (FLCs), the suspensions of magnetic nanoparticles dispersed at different concentrations in liquid crystals (LCs), and their special magnetically induced birefringence characteristics have been investigated in the terahertz regime, mainly focusing on the interaction between magnetic cluster chains and LC molecules. We experimentally demonstrated the surface anchoring effect of the magnetic cluster chains on LC molecules in a mm-thick LC cell under an extremely weak external magnetic field (EMF), leading to a uniform anchoring arrangement of the LC molecules over the entire LC cell. Unlike pure 5CB LCs, the phase shift range of the FLCs at 1.45 THz up to π (no to ne or ne to no) can be achieved over the whole tunable range by simply changing the magnitude of the EMF without changing its direction, and the optical axis of LC molecules can be controlled to rotate by 90°, thereby realizing a tunable THz wave plate. This work provides a new way in the development of THz magneto-optic devices and phase devices.
ABSTRACT
High-index dielectric metasurfaces are rarely reported around 0.1-0.3 THz, as an extremely large etching depth is needed according to the millimeter-scale wavelength. In this work, we propose an easy solution to sub-THz wideband polarization control by utilizing 3D-printed low-index (n~1.5) metagratings. The metagrating with subwavelength lattice is shown as a very efficient half-wave plate (net polarization conversion of 87%) at 0.14 THz but showing noisy spectrum. The design with superwavelength lattice offers a smooth and wide bandwidth for linear polarization rotation. Study of the mechanism shows that the lattice size slightly above wavelength is a better choice for the low-index metadevice as it maintains high efficiency in the zero diffraction order and wide bandwidth due to the small mode dispersion. Such designs offer a feasible solution especially suitable for sub-THz polarization and phase control, complementary to the existing high-index dielectric and metallic metasurfaces.
ABSTRACT
With the booming microwave and terahertz technology for communication, detection, and healthcare, the consequently increasingly complicated electromagnetic environment is in urgent need of high-performance microwave and terahertz absorption materials. However, it is still a huge challenge to achieve consecutively strong absorption in both microwave and terahertz regimes. Herein, an ultra-broadband and highly efficient absorber for both microwave and terahertz bands based on the monolithic three-dimensional cross-linked Fe3O4/graphene material (3DFG) is first reported. The 3DFG shows an incredible wide qualified absorption bandwidth (with reflection loss less than -10 dB) from 3.4 GHz to 2.5 THz, which is the best result in this area by far. Furthermore, the remarkable absorption performance can be maintained under oblique incidence, different compressive strains, and even after 200 compression/release cycles. The designed highly porous structure for minimizing surface reflection combined with the micro-macro integrated high lossy framework results in the excellent absorptivity, as verified by the terahertz time-domain spectroscopy technique. With these, the 3DFG achieves an unprecedentedly average absorption intensity of 38.0 dB, which is the maximum value among the broadband absorbers. In addition, its specific average microwave and terahertz absorption value is over 2 orders of magnitude higher than other kinds of reported materials. The results provide new insights for developing novel ultra-broadband absorbers with stronger reflection loss and wider absorption bandwidth.
ABSTRACT
Manipulation of terahertz (THz) wave plays an important role in THz imaging, communication, and detection. The difficulty in manipulating the THz wave includes single function, untunable, and inconvenient integration. Here, we present a mechanically tunable THz polarizer by using stretchable buckled carbon nanotube sheets on natural rubber substrate (BCNTS/rubber). The transmittance and degree of polarization of THz wave can be modulated by stretching the BCNTS/rubber. The experiments showed that the degree of polarization increased from 17% to 97%, and the modulation depth reached 365% in the range of 0.2-1.2 THz, as the BCNTS/rubber was stretched from 0% to 150% strain. These changes can be also used for high strain sensing up to 150% strain, with a maximum sensitivity of 2.5 M/S. A spatial modulation of THz imaging was also realized by stretching and rotating BCNTS/rubber. The theoretical analysis and numerical modeling further confirm the BCNTS/rubber changes from weak anisotropic to highly anisotropic structure, which play key roles in THz wave modulation. This approach for active THz wave manipulation can be widely used in polarization imaging, wearable material for security, and highly sensitive strain sensing.
ABSTRACT
An optically pumped ultrasensitive broadband terahertz (THz) wave modulator based on polyvinyl alcohol (PVA) film on Si wafer was demonstrated in this work. The THz time domain spectroscopy experiments confirm that the PVA/Si can drastically enhance the photo-induced THz wave modulation on the Si surface, especially when the PVA film is heated by a high-power laser. A modulation depth of 72% can be achieved only under 0.55 W/cm2 modulated laser power, which is superior significantly to the bare Si. The numerical simulations indicate that the laser processed PVA (LP-PVA) film increases the photo-generated carrier concentration on the Si surface in two orders of magnitude higher than that of bare Si. Moreover, the modulation mechanism and the dynamic process of laser heating on the PVA/Si have been discussed. This highly efficient THz modulation mechanism and its simple fabrication method have great application potentials in THz modulators.
ABSTRACT
In this work, the optically anisotropic property of dual-frequency liquid crystals (DFLC) in terahertz (THz) regime has been experimentally investigated, which indicates that the refractive index and birefringence of DFLC can be continuously modulated by both the alternating frequency and intensity of the alternating electric field. This tunability originates from the rotation of DFLC molecules induced by alternating electric fields. The results show that by modulating the alternating frequency from 1 kHz to 100 kHz under 30 kV/m electric field, the 600 µm thickness DFLC cell can play as a tunable quarter-wave plate above 0.68 THz, or a half-wave plate above 1.33 THz. Besides, it can be viewed as a tunable THz phase shifter from 0 to π. Therefore, due to its novel tuning mechanism, DFLC will be of great significance in dynamic manipulating on THz phase and polarization.
ABSTRACT
Subwavelength dielectric gratings are widely applied in the phase and polarization manipulation of light. However, the dispersion of the normal dielectric gratings is not flat while their birefringences are not enough in the THz regime. In this paper, we have fabricated two all-dielectric gratings with gradient grids in the THz regime, of which artificial birefringence is much larger than that of the equal-grid dielectric grating demonstrated by both experiments and simulations. The transmission and dispersion characteristics are also improved since the gradient grids break the periodicity of grating lattices as a chirp feature. From 0.6-1.4 THz, a broadband birefringence reaches 0.35 with a low dispersion and good linearity of phase shift, and the maximum phase shift is 1.4π. Furthermore, these gradient gratings are applied as half-wave plates and realize a linear polarization conversion with a conversion rate over 99%, also much higher than the equal-grid gratings. These gradient gratings show great advantages compared to the periodic gratings and provide a new way in the designing of artificial birefringence material.
ABSTRACT
In this work, we investigate the nonreciprocal circular dichroism for terahertz (THz) waves in magnetized InSb by the theoretical calculation and numerical simulation, which indicates that longitudinally magnetized InSb can be applied to the circular polarizer and nonreciprocal one-way transmission for the circular polarization THz waves. Furthermore, we propose a double-layer magnetoplasmonics based on the longitudinally magnetized InSb, and find two MO enhancement mechanisms in this device: the magneto surface plasmon resonance on the InSb-metal surface and Fabry-Pérot resonances between two orthogonal metallic gratings. These two resonance mechanisms enlarge the MO polarization rotation and greatly reduce the external magnetic field below 0.1T. The one-way transmission and perfect linear polarization conversion can be realized over 70dB, of which the transmittance can be modulated from 0 to 80% when the weak magnetic field changes from 0 to 0.1T under the low temperature around 200K. This magnetoplasmonic device has broad potential as a THz isolator, modulator, polarization convertor, and filter in the THz application systems.
ABSTRACT
GABAB receptor is present at pre- and post-synaptic sites and participates in many brain functions including cognition, reward and anxiety. Although a lot of research has shown that activation or blockade of GABAB receptor may produce different even opposing effects on long-term potentiation (LTP) and cognitive function, there is little information available concerning the effect of GABAB receptor on behavioral LTP, a learning-induced LTP model. Herein, we firstly examined the effects of 2-OH saclofen, a GABAB receptor antagonist, on the induction of behavioral LTP and Y-maze learning performance. In addition, GABAB receptor has been reported to be present on cholinergic terminals and to regulate the ACh release. Therefore, we also investigated the effect of 2-OH saclofen on the impairments in behavioral LTP and cognitive function induced by scopolamine, an acetylcholine receptor antagonist. We found that intrahippocampal application of 2-OH saclofen could significantly enhance the population spike (PS) amplitude with a dose-response relationship, and 20 µM 2-OH saclofen evidently facilitated the formation of behavioral LTP in the perforant pathway to the dentate gyrus (PP-DG) and led to an obvious improvement in maze learning performance. Furthermore, intrahippocampal 20 µM 2-OH saclofen administration could markedly reverse the scopolamine-induced impairments in behavioral LTP and maze performance. Our data demonstrate that blockade of GABAB receptor displays a facilitatory role in the induction of behavioral LTP and maze learning task, and the antagonist of GABAB receptor seems to exert the potentially therapeutic value in the cognitive defect induced by cholinergic dysfunction.
Subject(s)
Baclofen/analogs & derivatives , GABA-B Receptor Antagonists/pharmacology , Hippocampus/drug effects , Long-Term Potentiation/drug effects , Maze Learning/drug effects , Animals , Baclofen/pharmacology , Cognition/drug effects , Male , Rats, Sprague-DawleyABSTRACT
Using a combination of electrophysiological recordings, behavioral tests and local pharmacological administration in hippocampus, we investigated in the present study the effects of nitric oxide (NO) synthase inhibitor N-nitro-l-arginine methyl ester (l-NAME) on the behavioral long-term potentiation (LTP) and maze learning performance in freely moving rats. The results showed as follows: (1) intrahippocampal l-NAME administration led to a defect in maze learning performance of the animals; (2) l-NAME treatment also substantially impaired the induction of the behavioral LTP in perforant pathway to dentate gyrus (PP-DG) pathway induced by maze learning task, while it had no significant effects on basic synaptic transmission in PP-DG pathway; Collectively, these results indicate that NO synthesis may be critical for the behavioral LTP in PP-DG pathway and maze learning performance.
Subject(s)
Behavior, Animal/drug effects , Dentate Gyrus/drug effects , Hippocampus/drug effects , Long-Term Potentiation/drug effects , NG-Nitroarginine Methyl Ester/pharmacology , Nitric Oxide Synthase/antagonists & inhibitors , Animals , Dentate Gyrus/physiology , Hippocampus/physiology , Male , Maze Learning/drug effects , Memory/drug effects , Perforant Pathway/drug effects , Perforant Pathway/physiology , Rats , Rats, Sprague-Dawley , Synaptic Transmission/drug effectsABSTRACT
OBJECTIVE: To evaluate the clinical short-term results of the acellular dermal matrix for guided bone regeneration. METHODS: Sixty-four patients with bone defect in anterior maxillary area (average bone width: 3 mm) were included. Ridge-splitting technique with simultaneous placement of implants and artificial bone material implantation was performed in 21 patients (non-membrane group). Forty-three patients received the same procedure but with acellular dermal matrix covering the surgical sites (membrane group). The patients were followed up for three months and the new bone formation was checked in clinic and by X-ray. RESULTS: Three months after operation, the membrane group showed good osseointegration and high bone density over the implant cover screws. In the second operation, the membranes became thinner and the new bone fully covered the implant in the membrane group. The labial bone exhibited slight absorption and labial surface of 7 implants in 7 patients was exposed in non-membrane group. The width and the height of the ridge in the second operation were greater in membrane group than in non-membrane group (P < 0.05). CONCLUSIONS: The acellular dermal matrix can effectively resist the growth of soft tissue to allow bone regeneration around the implant.
Subject(s)
Acellular Dermis , Bone Regeneration , Dental Implants , Guided Tissue Regeneration, Periodontal , Bone Substitutes , HumansABSTRACT
OBJECTIVE: To introduce and evaluate the procedure and the effect of maxillary sinus lift with closed technique by Summers osteotome, bone grafting and simultaneous implant placement. METHODS: 66 cases with severely resorbed alveolar bone in maxillary posterior region received sinus lift with Summers osteotome, simultaneously bone grafting and implants placement. The final restoration was finished at 6 months postoperatively. RESULTS: The operation procedure were eventless in the 66 cases, the sinus floor were elevated by 2-5 mm, three-dimensional reconstruction of the CT scan pictures showed the smooth dome profile of the lifting sites and no signs of laceration on the membrane, and there were no maxillary antritis after operation. After 6 months, no significantly bone graft resorption and good osseointegration were noticed in X-ray imaging. The final restoration was finished at this time. 12-24 months after the restoration, all implants inserted were remain, the hard and soft tissue were healthy, prosthesis were stable and functioned. X-ray showed good osseointegration in the lifting sites, the vertical resorption around the implants were less than 1 mm. CONCLUSION: With properly use of Summers osteotome, scraps of the bone in the implant sockets can be pushed into the sinus, these autogenous bone scraps were in favor of the osseogenesis and the sinus floor can be easily elevated by the method with very infrequent complications. It enlarged indication of dental implants and avoided operation of harvesting autogenous bone in other site. The method is simple and valuable to clinical application.