In Situ Growth of Amorphous MnO2 on Graphite Felt via Mild Etching Engineering as a Powerful Catalyst for Advanced Vanadium Redox Flow Batteries.

Owing to the advantages of low cost, high safety, and a desirable cycling lifetime, vanadium redox flow batteries (VRFBs) have attracted great attention in the large-scale energy storage field. However, graphite felts (GFs), widely used as electrode materials, usually possess an inferior catalytic activity for the redox reaction of vanadium ions, largely limiting the energy efficiency and rate performance of VRFBs. Here, an in situ growth of amorphous MnO2 on graphite felt (AMO@GF) was designed for application in VRFBs via mild and rapid etching engineering (5 min). After the etching process, the graphite felt fibers showed a porous and defective surface, contributing to abundant active sites toward the redox reaction. In addition, formed amorphous MnO2 can also serve as a powerful catalyst to facilitate the redox couples of VO2+/VO2+ based on density functional theoretical (DFT) calculations. As a result, the VRFB using AMO@GF displayed an elevated energy efficiency and superior stability after 2400 cycles at 200 mA cm-2, and the maximum current density can reach 300 mA cm-2. Such a high-efficiency and convenient design strategy for the electrode material will drive the further development and industrial application of VRFBs and other flow battery systems.

Non-negligible impact of microplastics on wetland ecosystems.

There has been much concern about microplastic (MP) pollution in marine and soil environments, but attention is gradually shifting towards wetland ecosystems, which are a transitional zone between aquatic and terrestrial ecosystems. This paper comprehensively reviews the sources of MPs in wetland ecosystems, as well as their occurrence characteristics, factors influencing their migration, and their effects on animals, plants, microorganisms, and greenhouse gas (GHG) emissions. It was found that MPs in wetland ecosystems originate mainly from anthropogenic sources (sewage discharge, and agricultural and industrial production) and natural sources (rainfall-runoff, atmospheric deposition, and tidal effects). The most common types and forms of MPs identified in the literature were polyethylene and polypropylene, fibers, and fragments. The migration of MPs in wetlands is influenced by both non-biological factors (the physicochemical properties of MPs, sediment characteristics, and hydrodynamic conditions) and biological factors (the adsorption and growth interception by plant roots, ingestion, and animal excretion). Furthermore, once MPs enter wetland ecosystems, they can impact the resident microorganisms, animals, and plants. They also have a role in global warming because MPs act as unique exogenous carbon sources, and can also influence GHG emissions in wetland ecosystems by affecting the microbial community structure in wetland sediments and abundance of genes associated with GHG emissions. However, further investigation is needed into the influence of MP type, size, and concentration on the GHG emissions in wetlands and the underlying mechanisms. Overall, the accumulation of MPs in wetland ecosystems can have far-reaching consequences for the local ecosystem, human health, and global climate regulation. Understanding the effects of MPs on wetland ecosystems is essential for developing effective management and mitigation strategies to safeguard these valuable and vulnerable environments.

Ion Sieve Interface Assisted Zinc Anode with High Zinc Utilization and Ultralong Cycle Life for 61 Wh/kg Mild Aqueous Pouch Battery.

The cycling stability of a thin zinc anode under high zinc utilization has a critical impact on the overall energy density and practical lifetime of zinc ion batteries. In this study, an ion sieve protection layer (ZnSnF@Zn) was constructed in situ on the surface of a zinc anode by chemical replacement. The ion sieve facilitated the transport and desolvation of zinc ions at the anode/electrolyte interface, reduced the zinc deposition overpotential, and inhibited side reactions. Under a 50% zinc utilization, the symmetrical battery with this protection layer maintained stable cycling for 250 h at 30 mA cm-2. Matched with high-load self-supported vanadium-based cathodes (18-20 mg cm-2), the coin battery with 50% zinc utilization possessed an energy density retention of 94.3% after 1000 cycles at 20 mA cm-2. Furthermore, the assembled pouch battery delivered a whole energy density of 61.3 Wh kg-1, surpassing the highest mass energy density among reported mild zinc batteries, and retained 76.7% of the energy density and 85.3% (0.53 Ah) of the capacity after 300 cycles.

Preferred Orientation Deposition via Multifunctional Gel Electrolyte with Molecular Anchor Enabling Highly Reversible Zn Anode.

The high activity of water molecules results in a series of awful parasitic reaction, which seriously impede the development of aqueous zinc batteries. Herein, a new gel electrolyte with multiple molecular anchors is designed by employing natural biomaterials from chitosan and chlorophyll derivative. The gel electrolyte firmly anchors water molecules by ternary hydrogen bonding to reduce the activity of water molecules and inhibit hydrogen evolution reaction. Meanwhile, the multipolar charged functional groups realize the gradient induction and redistribution of Zn2+ , which drives oriented Zn (002) plane deposition of Zn2+ and then achieves uniform Zn deposition and dendrite-free anode. As a result, it endows the Zn||Zn cell with over 1700 h stripping/plating processes and a high efficiency of 99.4% for the Zn||Cu cell. In addition, the Zn||V2 O5 full cells also exhibit capacity retention of 81.7% after 600 cycles at 0.5 A g-1 and excellent long-term stability over 1600 cycles at 2 A g-1 , and the flexible pouch cells can provide stable power for light-emitting diodes even after repeated bending. The gel electrolyte strategy provides a reference for reversible zinc anode and flexible wearable devices.

Energy Band Engineering Guided Design of Bidirectional Catalyst for Reversible Li-CO2 Batteries.

Li-CO2 batteries arouse great interest in the context of carbon neutralization, but their practicability is severely hindered by the sluggish CO2 redox reaction kinetics at the cathode, which brings about formidable challenges such as high overpotential and low Coulombic efficiency. For the complex multi-electron transfer process, the design of catalysts at the molecular or atomic level and the understanding of the relationship between electron state and performance are essential for the CO2 redox. However, little attention is paid to it. In this work, using Co3 S4 as a model system, density functional theory (DFT) calculations reveal that the adjusted d-band and p-band centers of Co3 S4 with the introduction of Cu and sulfur vacancies are hybridized between CO2 and Li species, respectively, which is conducive to the adsorption of reactants and the decomposition of Li2 CO3 , and the experimental results further verify the effectiveness of energy band engineering. As a result, a highly efficient bidirectional catalyst is produced and shows an ultra-small voltage gap of 0.73 V and marvelous Coulombic efficiency of 92.6%, surpassing those of previous catalysts under similar conditions. This work presents an effective catalyst design and affords new insight into the high-performance cathode catalyst materials for Li-CO2 batteries.

Recycled Tandem Catalysts Promising Ultralow Overpotential Li-CO2 Batteries.

Lithium-carbon dioxide (Li-CO2 ) batteries are regarded as a prospective technology to relieve the pressure of greenhouse emissions but are confronted with sluggish CO2 redox kinetics and low energy efficiency. Developing highly efficient and low-cost catalysts to boost bidirectional activities is craved but remains a huge challenge. Herein, derived from the spent lithium-ion batteries, a tandem catalyst is subtly synthesized and significantly accelerates the CO2 reduction and evolution reactions (CO2 RR and CO2 ER) kinetics with an in-built electric field (BEF). Combining with the theoretical calculations and advanced characterization techniques, this work reveals that the designed interface-induced BEF regulates the adsorption/decomposition of the intermediates during CO2 RR and CO2 ER, endowing the recycled tandem catalyst with excellent bidirectional activities. As a result, the spent electronics-derived tandem catalyst exhibits remarkable bidirectional catalytic performance, such as an ultralow voltage gap of 0.26 V and an ultrahigh energy efficiency of 92.4%. Profoundly, this work affords new opportunities to fabricate low-cost electrocatalysts from recycled spent electronics and inspires fresh perceptions of interfacial regulation including but not limited to BEF to engineer better Li-CO2 batteries.

Research progress on preparation of lateral femoral tunnel and graft fixation in anterior cruciate ligament reconstruction.

Anterior cruciate ligament (ACL) injury is one of the most common types of sports injuries. People's need to participate in sports and desire for a high quality of life promotes the continuous development of ACL reconstruction technology. Arthroscopic ACL reconstruction has been recognized as an effective method for the treatment of ACL injuries. This review analyses and summarizes the advantages and limitations of each surgical procedure for arthroscopic ACL reconstruction reported in the relevant literature so as to promote the future development of more relevant techniques.

Iridoid glycosides from Morinda officinalis induce lysosomal biogenesis and promote autophagic flux to attenuate oxidative stress.

Morinda officinalis is a traditional Chinese tonic herb, and have been used in the treatment of multiple diseases. Here, three iridoid glycosides isolated from M. officinalis were evaluated for their roles in the autophagy-lysosomal pathway. All three iridoid glycosides could induce TFEB/TFE3-mediated lysosomal biogenesis and trigger autophagy. Interestingly, they promoted the nuclear import of TFEB/TFE3 without affecting their nuclear export, suggesting their role in the maintenance of lysosomal homeostasis. The results from this study shed light on the identification of autophagy activators from M. officinalis and provide a basis for developing them in the treatment of oxidative stress-involved diseases.

To evaluate the efficacy and safety of dezocine combined with lidocaine in local anesthesia for percutaneous testicular sperm aspiration.

A total of 130 patients who underwent percutaneous testicular sperm aspiration from March 2021 to February 2023 were randomly divided into a Dezocine group and a control group. The Dezocine group received a muscle injection of 0.05mg/kg Dezocine 30 minutes before surgery, while the control group received a muscle injection of 0.01ml/kg normal saline. Both groups received 3ml of 2% lidocaine for spermatic cord block anesthesia. The anesthesia onset time, anesthesia duration, numeric rating scale (NRS) score, anesthesia satisfaction rate and incidence of adverse reactions were recorded and compared between the two groups. The statistical results showed that there were significant differences between the two groups in terms of anesthesia onset time, anesthesia duration, anesthesia satisfaction rate, non-steroidal anti-inflammatory drug (NSAID) use within 24 hours after surgery and NRS scores at 15 minutes, 1 hour and 2 hours after surgery. The incidence of adverse reactions in the Dezocine group was lower than that in the control group, but the difference was not statistically significant. The combination of Dezocine and lidocaine for spermatic cord block anesthesia during percutaneous testicular sperm aspiration is safe, effective and associated with fewer adverse reactions. It is suitable for clinical application and promotion in reproductive medicine outpatient surgery.

[Genetic Subtypes and Pretreatment Drug Resistance in the Newly Reported Human Immunodeficiency Virus-Infected Men Aged≥50 Years Old in Guangxi].

Objective To analyze the genetic subtypes of human immunodeficiency virus (HIV) and the prevalence of pretreatment drug resistance in the newly reported HIV-infected men in Guangxi. Methods The stratified random sampling method was employed to select the newly reported HIV-infected men aged≥50 years old in 14 cities of Guangxi from January to June in 2020.The pol gene of HIV-1 was amplified by nested reverse transcription polymerase chain reaction and then sequenced.The mutation sites associated with drug resistance and the degree of drug resistance were then analyzed. Results A total of 615 HIV-infected men were included in the study.The genetic subtypes of CRF01_AE,CRF07_BC,and CRF08_BC accounted for 57.4% (353/615),17.1% (105/615),and 22.4% (138/615),respectively.The mutations associated with the resistance to nucleoside reverse transcriptase inhibitors (NRTI),non-nucleoside reverse transcriptase inhibitors (NNRTI),and protease inhibitors occurred in 8 (1.3%),18 (2.9%),and 0 patients,respectively.M184V (0.7%) and K103N (1.8%) were the mutations with the highest occurrence rates for the resistance to NRTIs and NNRTIs,respectively.Twenty-two (3.6%) patients were resistant to at least one type of inhibitors.Specifically,4 (0.7%),14 (2.3%),4 (0.7%),and 0 patients were resistant to NRTIs,NNRTIs,both NRTIs and NNRTIs,and protease inhibitors,respectively.The pretreatment resistance to NNRTIs had much higher frequency than that to NRTIs (2.9% vs.1.3%;χ2=3.929,P=0.047).The prevalence of pretreatment resistance to lamivudine,zidovudine,tenofovir,abacavir,rilpivirine,efavirenz,nevirapine,and lopinavir/ritonavir was 0.8%, 0.3%, 0.7%, 1.0%, 1.3%, 2.8%, 2.9%, and 0, respectively. Conclusions CRF01_AE,CRF07_BC,and CRF08_BC are the three major strains of HIV-infected men≥50 years old newly reported in Guangxi,2020,and the pretreatment drug resistance demonstrates low prevalence.

Remodeling Zinc Deposition via Multisite Zincophilic Chlorophyll for Powerful Aprotic Zinc Batteries.

The organic electrolyte can resolve the hurdle of hydrogen evolution in aqueous electrolytes but suffers from sluggish electrochemical reaction kinetics due to a compromised mass transfer process. Herein, we introduce a chlorophyll, zinc methyl 3-devinyl-3-hydroxymethyl-pyropheophorbide-a (Chl), as a multifunctional electrolyte additive for aprotic zinc batteries to address the related dynamic problems in organic electrolyte systems. The Chl exhibits multisite zincophilicity, which significantly reduces the nucleation potential, increases the nucleation sites, and induces uniform nucleation of Zn metal with a nucleation overpotential close to zero. Furthermore, the lower LUMO of Chl contributes to a Zn-N-bond-containing SEI layer and inhibits the decomposition of the electrolyte. Therefore, the electrolyte enables repeated zinc stripping/plating up to 2000 h (2 Ah cm-2 cumulative capacity) with an overpotential of only 32 mV and a high Coulomb efficiency of 99.4%. This work is expected to enlighten the practical application of organic electrolyte systems.

In Situ Buildup of Zinc Anode Protection Films with Natural Protein Additives for High-Performance Zinc Battery Cycling.

The uncontrolled growth of dendrites and serious side reactions, such as hydrogen evolution and corrosion, significantly hinder the industrial application and development of aqueous zinc-ion batteries (ZIBs). This article presents ovalbumin (OVA) as a multifunctional electrolyte additive for aqueous ZIBs. Experimental characterizations and theoretical calculations reveal that the OVA additive can replace the solvated sheath of recombinant hydrated Zn2+ through the coordination water, preferentially adsorb on the surface of the Zn anode, and construct a high-quality self-healing protective film. Notably, the OVA-based protective film with strong Zn2+ affinity will promote uniform Zn deposition and inhibit side reactions. As a result, Zn||Zn symmetrical batteries in ZnSO4 electrolytes containing OVA achieve a cycle life exceeding 2200 h. Zn||Cu batteries and Zn||MnO2 (2 A g-1) full batteries show excellent cycling stability for 2500 cycles, demonstrating promising application prospects. This study provides insights into utilizing natural protein molecules to modulate the kinetics of Zn2+ diffusion and enhance the stability of the anode interface.

Research review on the pollution of antibiotic resistance genes in livestock and poultry farming environments.

Increasingly serious pollution of antibiotic resistance genes (ARGs) caused by the abuse of antibiotics in livestock and poultry industry has raised worldwide concerns. ARGs could spread among various farming environmental media through adsorption, desorption, migration, and also could transfer into human gut microbiome by hori-zontal gene transfer (HGT), posing potential threats to public health. However, the comprehensive review on the pollution patterns, environmental behaviors, and control techniques of ARGs in livestock and poultry environments in view of One Health is still inadequate, resulting in the difficulties in effectively assessing ARGs transmission risk and developing the efficient control strategies. Here, we analyzed the pollution characteristics of typical ARGs in various countries, regions, livestock species, and environmental media, reviewed the critical environmental fate and influencing factors, control strategies, and the shortcomings of current researches about ARGs in the livestock and poultry farming industry combined with One Health philosophy. In particular, we addressed the importance and urgency of identifying the distribution characteristics and environmental process mechanisms of ARGs, and developing green and efficient ARG control means in livestock farming environments. We further proposed gaps and prospects for the future research. It would provide theoretical basis for the research on health risk assessment and technology exploitation of alleviating ARG pollution in livestock farming environment.

The Effect of Arthroscopic Extra-Articular Entire Coracohumeral Ligament Release for Patients with Recalcitrant Frozen Shoulder.

OBJECTIVE: The thickened coracohumeral ligament (CHL) is an important part of the typical manifestations and magnetic resonance imaging of frozen shoulder. However, only a few clinical studies with limited cases on arthroscopic extra-articular entire CHL release exist in the literature. This study was to evaluate the effect of arthroscopic extra-articular entire CHL release for patients with recalcitrant frozen shoulder. METHODS: From February 2014 to February 2020, 81 cases of recalcitrant frozen shoulder patients treated with surgery in a single-center shoulder department and followed for more than 2 years were analyzed. Arthroscopic 360° capsular release was performed with intra-articular partial release (IPR group) or additional extra-articular entire release (IPR + EER group) of CHL. The same rehabilitation program was performed after surgery in both groups. Visual analogue scale (VAS) for pain, range of motion (ROM), and the Constant-Murley scoring system was evaluated before operation, at 3 months after operation, 6 months after operation, and the final follow-up. T-test, Mann-Whitney U-test and chi-squared test were used to compared data. RESULTS: There were 39 patients in the IPR group, with an average follow-up of 29.2 months. A total of Forty-two patients in the IPR + EER group completed a mean follow-up of 25.7 months. All incisions healed in stages. There were significant differences in Constant-Murley shoulder score, VAS score, and ROM before operation and at the final follow-up in both groups (both P < 0.001). The VAS score of the IPR + EER group was lower than that of the IPR group at 3 months after surgery (P < 0.05), and 6 months after operation (P < 0.05). External rotation, internal rotation, and abduction of ROMs and Constant-Murley shoulder score were significantly greater in the IPR + EER group at 3 months (P < 0.001, P < 0.05, P < 0.001, P < 0.05, respectively) and 6 months after operation (P < 0.001, P < 0.05, P < 0.001, P < 0.05, respectively). At the last follow-up, there was no significant difference in forward flexion, internal rotation, and abduction of ROMs, VAS, and the Constant-Murley shoulder score between the IPR and IPR + EER groups. The external rotation of the IPR + EER group was still greater than that of the IPR group at the last follow-up (P < 0.001). CONCLUSION: Arthroscopic extra-articular entire coracohumeral ligament release could solve early pain of shoulder joint, recover shoulder joint functions effectively, and achieve a satisfactory efficacy in the treatment of recalcitrant frozen shoulder.

Genetic Subtypes and Pretreatment Drug Resistance in the Newly Reported Human Immunodeficiency Virus-Infected Men Aged≥50 Years Old in Guangxi / 中国医学科学院学报

Objective To analyze the genetic subtypes of human immunodeficiency virus (HIV) and the prevalence of pretreatment drug resistance in the newly reported HIV-infected men in Guangxi. Methods The stratified random sampling method was employed to select the newly reported HIV-infected men aged≥50 years old in 14 cities of Guangxi from January to June in 2020.The pol gene of HIV-1 was amplified by nested reverse transcription polymerase chain reaction and then sequenced.The mutation sites associated with drug resistance and the degree of drug resistance were then analyzed. Results A total of 615 HIV-infected men were included in the study.The genetic subtypes of CRF01_AE,CRF07_BC,and CRF08_BC accounted for 57.4% (353/615),17.1% (105/615),and 22.4% (138/615),respectively.The mutations associated with the resistance to nucleoside reverse transcriptase inhibitors (NRTI),non-nucleoside reverse transcriptase inhibitors (NNRTI),and protease inhibitors occurred in 8 (1.3%),18 (2.9%),and 0 patients,respectively.M184V (0.7%) and K103N (1.8%) were the mutations with the highest occurrence rates for the resistance to NRTIs and NNRTIs,respectively.Twenty-two (3.6%) patients were resistant to at least one type of inhibitors.Specifically,4 (0.7%),14 (2.3%),4 (0.7%),and 0 patients were resistant to NRTIs,NNRTIs,both NRTIs and NNRTIs,and protease inhibitors,respectively.The pretreatment resistance to NNRTIs had much higher frequency than that to NRTIs (2.9% vs.1.3%;χ2=3.929,P=0.047).The prevalence of pretreatment resistance to lamivudine,zidovudine,tenofovir,abacavir,rilpivirine,efavirenz,nevirapine,and lopinavir/ritonavir was 0.8%, 0.3%, 0.7%, 1.0%, 1.3%, 2.8%, 2.9%, and 0, respectively. Conclusions CRF01_AE,CRF07_BC,and CRF08_BC are the three major strains of HIV-infected men≥50 years old newly reported in Guangxi,2020,and the pretreatment drug resistance demonstrates low prevalence.

The clinical effect of the long head of biceps tendon insertion reconstruction combined with pulley repair in the treatment of pulley system injuries / 中华骨科杂志

Objective:To investigate the clinical effect of long head of biceps tendon (LHBT) insertion reconstruction combined with pulley repair for pulley system injuries.Methods:A total of 46 patients (combined treatment group) with pulley system injury treated with LHBT insertion reconstruction combined with pulley repair in the Sports Medicine Department, Affiliated Xinhua Hospital of Dalian University from January to December 2020 were retrospectively analyzed, including 16 males and 30 females, aged 51.3±5.7 years (range, 45-72 years). 46 patients who underwent simple LHBT insertion reconstruction during the same period were selected as the control group (simple reconstruction group), including 14 males and 32 females, aged 50.6±6.7 years (range, 46-70 years). Visual analogue scale (VAS), Constant-Murley score, American Shoulder and Elbow Surgeon (ASES) score and long head of biceps tendon (LHB) score were compared preoperatively and at 1, 3, 6, 12 and 24 months postoperatively.Results:All patients were followed up for 26.2±1.5 months (range, 24-27 months). The VAS scores of the combined treatment group at 1, 3, and 6 months postoperatively were 3.4±1.3, 2.0±1.1, and 1.7±0.5, respectively, which were significantly lower than those of the simple reconstruction group 5.8±1.3, 3.5±1.1, and 2.6±0.5 ( P<0.05), while there was no significant difference between the two groups at 12 and 24 months postoperatively ( P>0.05). The Constant-Murley scores of the combined treatment group at 1, 3, and 6 months postoperatively were 31.3±4.7, 72.8±4.6, and 89.1±5.4, respectively, which were statistically greater than those of the simple reconstruction group (21.5±6.8, 52.8±5.2, and 80.1±6.2), and the differences were statistically significant ( P<0.05), while there was no statistically significant difference between the two groups at 12 and 24 months postoperatively ( P>0.05). The ASES scores of the combined treatment group at 1 and 3 months postoperatively were 56.2±6.9 and 82.7±8.2, which were statistically greater than those in the simple reconstruction group (40.2±5.6 and 62.9±8.0), while there was no statistically significant difference between the two groups at 6, 12, and 24 months postoperatively ( P>0.05). The LHB scores of the combined treatment group at 6 and 12 months postoperatively were 70.1±5.4 and 86.1±4.6, which were statistically greater than those of the simple reconstruction group (60.2±4.2 and 70.2±5.8), with statistically significant differences ( P<0.05), while there was no statistically significant difference between the two groups at 24 months postoperatively ( P>0.05). Conclusion:Arthroscopic LHBT insertion reconstruction combined with pulley system repair can relieve early postoperative shoulder pain and improve early function. It is an effective method for the treatment of pulley system injury.

Bimetal Substitution Enabled Energetic Polyanion Cathode for Sodium-Ion Batteries.

The practical application of Na-superionic conductor structured materials is hindered by limited energy density and structure damage upon activating the third Na+. We propose a bimetal substitution strategy with cheaper Fe and Ni elements for costive vanadium in the polyanion to improve both ionic and electronic conductivities, and a single two-phase reaction during Na+ intercalation/deintercalation and much reduced Na+ diffusion barrier are uncovered by ex-situ X-ray diffraction and density functional theory calculations. Thus, the obtained cathode, Na3Fe0.8VNi0.2(PO4)3, shows excellent electrochemical performances including high specific capacity (102.2 mAh g-1 at 0.1C), excellent rate capability (79.3 mAh g-1 at 20C), cycling stability (84.6% of capacity retention over 1400 cycles at 20C), low-temperature performance (89.7 mAh g-1 at 2C and -10 °C), and structure stability in an extended voltage window for the third Na+ utilization. A competitive energy density of ≈287 Wh kg-1 for full batteries based on cathode and anode materials is also confirmed.

The silicon active sites driven by oxygen vacancies in iron silicate for activating peroxymonosulfate.

Most metal sites and some non-metallic sites such as carbon and nitrogen are usually considered to be traditional active sites during peroxymonosulfate (PMS) activation. However, as an important non-metallic element, the actual role of silicon (Si) in PMS activation still remains unclear. In this work, taking iron silicate (FeSi) as an example, the role of the Si region in PMS activation was clearly revealed. The experiments and density functional theory (DFT) calculation results showed that besides the traditional Fe sites, the Si also played a non-negligible role during PMS activation. In FeSi containing oxygen vacancies (Ovac), Fe-Si was the active site instead of Fe-Fe. The Bard charge results implied that the presence of Ovac tuned the electronic properties of FeSi, making the Si participate in PMS activation. This work deepened understanding of the role of Si in silicates for PMS activation and provided a theoretical basis for the development of excellent Si-based catalysts.

Electrolytes for Multivalent Metal-Ion Batteries: Current Status and Future Prospect.

Electrochemical energy storage has experienced unprecedented advancements in recent years and extensive discussions and reviews on the progress of multivalent metal-ion batteries have been made mainly from the aspect of electrode materials, but relatively little work comprehensively discusses and provides an outlook on the development of electrolytes in these systems. Under this circumstance, this Review will initially introduce different types of electrolytes in current multivalent metal-ion batteries and explain the basic ion conduction mechanisms, preparation methods, and pros and cons. On this basis, we will discuss in detail the research and development of electrolytes for multivalent metal-ion batteries in recent years, and finally, critical challenges and prospects for the application of electrolytes in multivalent metal-ion batteries will be put forward.

A dual conducting network corbelled hydrated vanadium pentoxide cathode for high-rate aqueous zinc-ion batteries.

Aqueous zinc-ion batteries (ZIBs) are widely recognized for their excellent safety and high theoretical capacity but are hindered by the scarcity of cathode materials with high-rate performance and stability. Herein, a dual conducting network corbelled hydrated vanadium pentoxide that involves structural water as a pillar to enlarge the layer spacing of vanadium pentoxide and ensure cycling stability was reported. Along with the proton co-insertion, the hydrated vanadium pentoxide delivers nearly theoretical specific capacities of 524.6 mA h g-1 at 0.3 A g-1 and 258.7 mA h g-1 at 10 A g-1, which was largely due to non-faradaic contribution, and retains 196.8 mA h g-1 at 4.8 A g-1 after 1100 cycles. Notably, a high energy density of 409.3 W h kg-1 at 0.3 A g-1 and a power density of 6666.4 W kg-1 at 10 A g-1 have also been achieved. The design strategy offers a potential path to develop high-rate ZIBs.