High-speed ADC based on photonic time-stretched technology with dispersion-tunable CFBG.

We propose a photonic time-stretched analog-to-digital converter (PTS-ADC) based on dispersion-tunable chirped fiber Bragg grating (CFBG), by demonstrating a economical ADC system with seven different stretch factors. The stretch factors are tunable by changing the dispersion of CFBG, in order to obtain different sampling points. Accordingly, the total sampling rate of the system can be improved. Only a single channel is required to increase the sampling rate and achieve the effect of multi-channel sampling. Finally, seven groups of different stretch factors ranging from 1.882 to 2.206 are obtained, which are equivalent to seven groups of different sampling points. We successfully recover the input radio frequency (RF) signals with frequencies from 2 GHz to 10 GHz. In addition, the sampling points are increased by 14.4 times and the equivalent sampling rate is increased to 288 GSa/s. The proposed scheme is suitable for commercial microwave radar systems, which can obtain a much higher sampling rate at a low cost.

Accelerating the phase demodulation process for heterodyne Φ-OTDR using spatial phase shifting.

An effective orthogonal signal generation method for heterodyne-detection-based phase-sensitive optical time-domain reflectometer systems is proposed to accelerate the phase demodulation process. The demodulation principle is based on the spatial phase shifting technique. By exploiting the relative phase difference between adjacent spatial sampling channels, the orthogonal signal is easily obtained from basic algebra calculations. The simulation and experimental results showed that the proposed method achieved >100% computation speed improvement compared with the conventional methods, with a slight trade-off in phase demodulation performance. Therefore, the proposed method is potentially beneficial for the distributed acoustic sensing technology for reducing the computation complexity of phase demodulation procedures.

Data Reduction in Phase-Sensitive OTDR with Ultra-Low Sampling Resolution and Undersampling Techniques.

Data storage is a problem that cannot be ignored in the long-term monitoring of a phase-sensitive optical time-domain reflectometry (Φ-OTDR) system. In this paper, we proposed a data-reduction approach for heterodyne Φ-OTDR using an ultra-low sampling resolution and undersampling techniques. The operation principles were demonstrated and experiments with different sensing configurations were carried out to verify the proposed method. The results showed that the vibration signal could be accurately reconstructed from the undersampled 1-bit data. A space saving ratio of 98.75% was achieved by converting 128 MB of data (corresponding to 268.44 ms of sensing time) to 1.6 MB. The proposed method led to a potentially new data-reduction approach for heterodyne Φ-OTDR, which also provided economical guidance for the selection of the data-acquisition device.

Ultra-low sampling resolution technique for heterodyne phase-OTDR based distributed acoustic sensing.

Phase-sensitive optical time-domain reflectometry (Φ-OTDR) based on heterodyne detection is widely used for its simple structure and high signal-to-noise ratio (SNR). However, the large amount of raw data of Φ-OTDR places a heavy burden on the storage device and also limits the transferability of the data. In this Letter, we propose an ultra-low sampling resolution technique to solve the data storage problem in heterodyne Φ-OTDR. Experimental results show that the optical phase variations induced by external vibrations can be successfully demodulated from the 1-bit-resolution raw data, and a vibration SNR of 58.03 dB is achieved. In addition, this work also reveals that a data acquisition device with extremely low sampling resolution is sufficient for heterodyne Φ-OTDR, signifying that the cost of the system can be further decreased.

Real-Time Multi-Class Disturbance Detection for Φ-OTDR Based on YOLO Algorithm.

This paper proposes a real-time multi-class disturbance detection algorithm based on YOLO for distributed fiber vibration sensing. The algorithm achieves real-time detection of event location and classification on external intrusions sensed by distributed optical fiber sensing system (DOFS) based on phase-sensitive optical time-domain reflectometry (Φ-OTDR). We conducted data collection under perimeter security scenarios and acquired five types of events with a total of 5787 samples. The data is used as a spatial-temporal sensing image in the training of our proposed YOLO-based model (You Only Look Once-based method). Our scheme uses the Darknet53 network to simplify the traditional two-step object detection into a one-step process, using one network structure for both event localization and classification, thus improving the detection speed to achieve real-time operation. Compared with the traditional Fast-RCNN (Fast Region-CNN) and Faster-RCNN (Faster Region-CNN) algorithms, our scheme can achieve 22.83 frames per second (FPS) while maintaining high accuracy (96.14%), which is 44.90 times faster than Fast-RCNN and 3.79 times faster than Faster-RCNN. It achieves real-time operation for locating and classifying intrusion events with continuously recorded sensing data. Experimental results have demonstrated that this scheme provides a solution to real-time, multi-class external intrusion events detection and classification for the Φ-OTDR-based DOFS in practical applications.

Quantitative demodulation of distributed low-frequency vibration based on phase-shifted dual-pulse phase-sensitive OTDR with direct detection.

Phase-sensitive optical time-domain reflectometry (Φ-OTDR) has been proposed for distributed vibration sensing purpose over recent years. Emerging applications, including seismic and hydroacoustic wave detection, demand accurate low-frequency vibration reconstruction capability. We propose to use the direct-detection Φ-OTDR configuration to achieve quantitative demodulation of external low-frequency vibrations by phase-shifted dual-pulse probes. Simultaneous pulsing and phase shifting modulation is realized with a single acousto-optic modulator to generate such probes, relaxing the need for an additional optical phase modulator. In the experiments, vibrations with frequency as low as 0.5 Hz are successfully reconstructed with 10 m spatial resolution and 35 dB signal-to-noise ratio. Excellent linearity and repeatability are demonstrated between the optical phase demodulation results and the applied vibration amplitudes. The proposed method is capable of quantitative demodulation of low-frequency vibrations with a cost-effective system configuration and high computation efficiency, showing potential for commercial applications of distributed seismic or hydroacoustic wave acquisition.

Optical curvature sensor with high resolution based on in-line fiber Mach-Zehnder interferometer and microwave photonic filter.

Curvature measurement plays an important role in structural health monitoring, robot-pose measuring, etc. High-resolution curvature measurement is highly demanded. In this paper, an optical curvature sensor with high resolution based on in-fiber Mach-Zehnder interferometer (MZI) and microwave photonic filter (MPF) is proposed and experimentally demonstrated. The in-fiber MZI is constructed with a ring-core fiber (RCF) which is fusion spliced between two coreless fibers (CLFs). The structure of CLF-RCF-CLF is then sandwiched between two segments of single-mode fiber (SMF), making the whole interferometer structure of SMF-CLF-RCF-CLF-SMF. The operating principle is that different curvatures will cause the variations of the interference spectrum of MZI due to elastic-optic effect, and then the variations are converted into the frequency-shift of the MPF. The factors affecting the visibility of the interference spectrum are researched. A preliminary exploration of the multiplexing demodulation for the in-fiber-MZIs is also investigated and discussed, which is for the first time to the best of our knowledge, holding great potential to pave the way for constructing the sensing network composed of interferometric sensors. The curvature measurement sensitivity is -147.634 MHz/m-1, and the resolution is 6.774 × 10-6 m-1 which is the highest value up to now.

Multiplexed sensing interrogation technique based on a flexibly switchable multi-passband RF filter by using a Solc-Sagnac loop.

In this paper, we have proposed and experimentally demonstrated a multiplexed sensing interrogation technique based on a flexibly switchable multi-passband RF filter with a polarization maintaining fiber (PMF) Solc-Sagnac loop. A high-order Solc-Sagnac loop can be used as a spectrum slicer as well as sensing heads, and a multi-passband microwave photonic filter (MPF) can be achieved together with a dispersive medium. Environmental parameter variations will cause a frequency shift of the corresponding passband of the MPF, so by employing only one Sagnac loop, it is possible to monitor several environmental parameters simultaneously. In this article, we have demonstrated and analyzed the performance of the flexibly switchable multi-passband MPF by using a second-order Solc-Sagnac loop. To demonstrate the temperature sensing capabilities of our interrogation system, we have applied temperature changes individually to Sensor Head 1 (L P M F 1 ≈0.97m) only, Sensor Head 2 (L P M F 2 ≈2.97m) only, and both Sensor Head 1 and 2 in the experiment. By monitoring frequency shift of the MPF's passbands, the sensitivities for Sensor Head 1 and Sensor Head 2 have been estimated to be -0.275 ± 0.011 MHz/℃ and -0.811 ± 0.013 MHz/℃ respectively, which show a good sensing linearity and stability. By utilizing the longer length of the sensing PMF, higher sensitivity can be achieved. By using Solc-Sagnac loop with higher order, more sensors can be multiplexed.

Low-cost compressive sensing imaging based on spectrum-encoded time-stretch structure.

A low-cost compressive sensing imaging (CSI) system based on spectrum-encoded time-stretch (SETS) structure involving cascaded Mach-Zehnder Interferometers (MZIs) for spectral domain random mixing (also known as the optical random pattern generator) is proposed and experimentally demonstrated. A proof-of-principle simulation and experiment is performed. A mode-locked laser with a repetition rate of 50MHz and low-cost cascaded MZIs as the key devices enable fast CSI system. Data compression ratio from 6% to 25% are obtained using proposed CSI based SETS system. The proposed design solves the big data issue in the traditional time-stretch system. It has great potential in fast dynamic phenomena with low-cost and easy-access components.

Optical sensor network interrogation system based on nonuniform microwave photonic filters.

Based on the nonuniformly spaced microwave photonic delay-line filter technology, a new design of a generic optical fiber sensor network interrogation platform is proposed and demonstrated. Sensing information from different types of optical sensors embedded in filter taps is converted into the variations of delay time and amplitude of each filter tap individually. Information to be measured can be decoded from the complex temporal impulse response of the microwave photonic filter. As proof-of-concept, our proposed approach is verified by simulations and experimental demonstrations successfully. Four optical sensors of different types are simultaneously interrogated via inverse Fourier transform of the filter frequency response. The experiment results show good linearity between the variation of temporal impulse response and the variations of the twist, the lateral pressure, the transversal loading and the temperature. The sensitivity of the sensors in the proposed platform is -2.130×10-5 a.u/degree, 6.1039 ps/kPa, -1.9146×10-5 a.u/gram, and 5.1497 ps/°C, respectively. Compared to the conventional optical sensors interrogation system, the presented approach provides a centralized solution that works for different types of optical sensors and can be easily expanded to cover larger optical sensor networks.