Assessment of titanium metallization thin film deposited on alumina substrate: Microstructure and nano-indentation.

Surface titanium (Ti) metallization was conducted on alumina (Al2O3) through chemical vapor deposition (CVD) method derived from non-contact pack cementation. The effects of different deposition temperature (1000 °C, 1050 °C, and 1100 °C) were examined in this scenario. The morphology, phase composition, and interfacial defects of the resulting films were systematically investigated through scanning electron microscopy, energy dispersive spectrometry, and X-ray diffraction. The nanomechanical characterization of the proposed thin films was evaluated by conducting nano-indentation tests at different depths. The results revealed that uniform Ti films were coated on the Al2O3 substrate. During coating, the atoms on the matrix surface were driven to form different structure due to different deposition temperature, leading to disparate morphologies of the surface and the interface, which consequently influenced the binding force between the film and the substrate. Moreover, the nanomechanical properties were found to be related to the internal and interface structure. Decreased modulus and hardness were obtained for metallization films treated at 1050 °C, and plastic deformation was the main deformation pattern.

Strain-induced phase transformation behavior of stabilized zirconia ceramics studied via nanoindentation.

To study the tetragonal-to-monoclinic (T-M) phase transformation behavior under different strain rates and indentation depths, nanoindentation tests were performed on stabilized zirconia ceramics with Continuous Stiffness Measurements. The results indicate decreased phase transformation velocities at both lower and higher strain rates, but increased velocity under medium strain rate during loading. The phase transformation process is sensitive to P/P but the final volume fractions are almost identical (45%). Furthermore, most of the phase transformation is completed during a short initial time followed by slight linear increase of the M-phase volume fraction with holding time. The phase transformation continuously slowed with increasing indentation depth when indented with a constant strain rate.