Pr2Ni0.8Co0.2O4+δ impregnated La0.6Sr0.4CoO3-δ oxygen electrode for efficient CO2 electroreduction in solid oxide electrolysis cells.

The solid oxide electrolysis cell (SOEC) is an advanced electrochemical device with a promising future in reducing CO2 emissions. Currently, the insufficient oxygen evolution reaction activity in conventional anode materials severely restricts the development of electrolytic CO2. Herein, the PNCO-LSC composite oxygen electrode was exploited by impregnating Pr2Ni0.8Co0.2O4+δ (PNCO) on the surface of La0.6Sr0.4CoO3-δ (LSC) oxygen electrode. The results of electrochemical tests and various physicochemical characterizations indicate that the infiltration of PNCO can lead to a significant improvement in the performance of the cell for CO2 electroreduction by increasing the surface oxygen exchange. The current density of the PNCO-LSC oxygen electrode infiltrated twice at 800 °C and 1.5 V reaches 0.917 A cm-2, which is about 40% higher than that of the bare LSC oxygen electrode. In addition, the single cell did not show significant degradation in a long-term stability test at a current density of 0.4 A cm-2 for 100 h of electrolysis. Therefore, the PNCO-LSC composite oxygen electrode material is effective in enhancing electrolytic CO2 performance.

Controllable Technology for Thermal Expansion Coefficient of Commercial Materials for Solid Oxide Electrolytic Cells.

Solid oxide electrolysis cell (SOEC) industrialization has been developing for many years. Commercial materials such as 8 mol% Y2O3-stabilized zirconia (YSZ), Gd0.1Ce0.9O1.95 (GDC), La0.6Sr0.4Co0.2Fe0.8O3-δ (LSCF), La0.6Sr0.4CoO3-δ (LSC), etc., have been used for many years, but the problem of mismatched thermal expansion coefficients of various materials between cells has not been fundamentally solved, which affects the lifetime of SOECs and restricts their industry development. Currently, various solutions have been reported, such as element doping, manufacturing defects, and introducing negative thermal expansion coefficient materials. To promote the development of the SOEC industry, a direct treatment method for commercial materials-quenching and doping-is reported to achieve the controllable preparation of the thermal expansion coefficient of commercial materials. The quenching process only involves the micro-treatment of raw materials and does not have any negative impact on preparation processes such as powder slurry and sintering. It is a simple, low-cost, and universal research strategy to achieve the controllable preparation of the thermal expansion coefficient of the commercial material La0.6Sr0.4Co0.2Fe0.8O3-δ (LSCF) through a quenching process by doping elements and increasing oxygen vacancies in the material. Commercial LSCF materials are heated to 800 °C in a muffle furnace, quickly removed, and cooled and quenched in 3.4 mol/L of prepared Y(NO3)3. The thermal expansion coefficient of the treated material can be reduced to 13.6 × 10-6 K-1, and the blank sample is 14.1 × 10-6 K-1. In the future, it may be possible to use the quenching process to select appropriate doping elements in order to achieve similar thermal expansion coefficients in SOECs.

Metal-organic framework derived single-atom catalysts for electrochemical CO2 reduction.

With maximum atomic utilization, transition metal single atom catalysts (SACs) show great potential in electrochemical reduction of CO2 to CO. Herein, by a facile pyrolysis of zeolitic imidazolate frameworks (ZIFs) assembled with tiny amounts of metal ions, a series of metal-nitrogen-carbon (M-N-C) based SACs (M = Fe, Ni, Mn, Co and Cu), with metal single atoms decorated on a nitrogen-doped carbon support, have been precisely constructed. X-ray photoelectron spectroscopy (XPS) for M-N-C showed that the N 1s spectrum was deconvoluted into five peaks for pyridinic (∼398.3 eV), M-N coordination (∼399.6 eV), pyrrolic (∼400.4 eV), quaternary (∼401.2 eV) and oxidized (∼402.9 eV) N species, demonstrating the existence of M-N bonding. High-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) indicates homogeneous distribution of metal species throughout the N-doped carbon matrix. Among the catalysts examined, the Fe-N-C catalyst exhibits the best catalytic performance in electrocatalytic CO2 reduction reaction (CO2RR) with nearly 100% faradaic efficiency for CO (FECO) at -0.9 V vs. the reversible hydrogen electrode (RHE). Ni-N-C is the second most active catalyst towards CO2RR performance, then followed by Mn-N-C, Co-N-C and Cu-N-C. Considering the optimum activity of Fe-N-C catalyst for the CO2RR, we then further investigate the effect of pyrolysis temperature on CO2RR of the Fe-N-C catalyst. We find the Fe-N-C catalyst pyrolyzed at 1000 °C exhibits the best catalytic activity in CO2RR with excellent CO selectivity.

High-strength and anti-biofouling nanofiber membranes for enhanced uranium recovery from seawater and wastewater.

Ultrathin fibers can increase the contact area between adsorbents and seawater during the uranium extraction process; however, their construction usually aggravates the complex spinning technology and lowers their mechanical strength. Meanwhile, high strength and antifouling ability are essential for ocean adsorbents to withstand the complex natural environment and microbial systems. Herein, we design high-strength and anti-biofouling poly(amidoxime) nanofiber membranes (HA-PAO NFMs) via a supramolecular crosslinking. Bacterial cellulose supplies the NFMs with ultrathin fiber structure, and large amounts of adsorption ligands are immobilized on the framework via the crosslinking with antibacterial ions. Thus, different from other fibers, HA-PAO NFMs achieve ultrathin diameter (20-30 nm), high BET area (51 m2 g-1), and excellent mechanical strength (13.6 MPa). The uranium adsorption capacity reaches to 409 mg-U/g-Ads in the simulated seawater, 99.2% uranium can be removed from the U-contained wastewater, and the adsorption process can be observed by the naked eye due to the significant color changes. The inhibition zones indicate their excellent anti-biofouling ability, which contributes to 1.83 times more uranium extraction amount from natural seawater than the non-antifouling adsorbents. Furthermore, they display a long service life and can be large-scale prepared, and the HA-PAO NFMs have potential in the massive uranium recovery.

Emergence of a thorium-organic framework as a radiation attenuator for selective X-ray dosimetry.

By first applying a thorium-organic framework (Th-SINAP-2) as a radiation attenuator and by incorporating a terpyridine derivative (Htpbz) as a photo-responsive guest, selective photochromism in response to X-rays was achieved in the host-guest assembly of Htpbz@Th-SINAP-2. Such a combination endows the afforded material with the lowest detection limit of X-ray dose among all photochromic sensors and a brand-new function of X-ray dosimetry for thorium containing materials.

Tuning of the Network Dimensionality and Photoluminescent Properties in Homo- and Heteroleptic Lanthanide Coordination Polymers.

Targeted synthesis, through a heteroleptic methodology, has resulted in three types of lanthanide (Ln) coordination polymers (CPs) with tailored dimensionality, tunable photoluminescent colors, and distinct luminescence quenching upon UV and X-ray irradiation. The homoleptic Ln(tpbz)(NO3)2 [CP-1; tpbz = 4-(2,2':6',2″-terpyridin-4'-yl)benzoate] is assembled from Ln cations and bridging tpbz ligands, accompanied by the decoration of NO3- anions, forming a one-dimensional (1D) chain structure. The presence of ancillary dicarboxylate linkers, 1,4-benzenedicarboxylate (bdc) and 2,5-thiophenedicarboxylate (tdc), promotes additional bridging between 1D chains to form a two-dimensional layer and a three-dimensional framework for Ln(tpbz)(bdc) (CP-2) and Ln(tpbz)(tdc) (CP-3), respectively. The multicolor and luminescence properties of the obtained CPs were investigated, displaying typical red EuIII-based and green TbIII-based emissions. The SmIII-bearing CP-1-CP-3, however, exhibit diverse ratiometric LnIII- and ligand-based emissions, with the photoluminescent colors varying from pink to orange to cyan. Notably, the TbIII-containing CP-1-CP-3 display distinct luminescence quenching upon continuous exposure to UV and X-ray irradiation. To our best knowledge, CP-2-Tb represents one of the most sensitive UV dosage probes (3.2 × 10-7 J) among all CPs.

Improved Performance of SRAM-Based True Random Number Generator by Leveraging Irradiation Exposure.

Encryption is an important step for secure data transmission, and a true random number generator (TRNG) is a key building block in many encryption algorithms. Static random-access memory (SRAM) chips can be easily available sources of true random numbers, benefiting from noisy SRAM cells whose start-up values flip between different power-on cycles. Embarking from this phenomenon, a novel performance (i.e., randomness and throughput) improvement method of SRAM-based TRNG is proposed, and its implementation can be divided into two phases: irradiation exposure and hardware postprocessing. As the randomness of original SRAM power-on values is fairly low, ionization irradiation is utilized to enhance its randomness, and the min-entropy can increase from about 0.03 to above 0.7 in the total ionizing irradiation (TID) experiments. Additionally, while the data remanence effect hampers obtaining random bitstreams with high speed, the ionization irradiation can also weaken this impact and improve the throughput of TRNG. In the hardware postprocessing stage, Secure Hash Algorithm 256 (SHA-256) is implemented on a Field Programmable Gate Array (FPGA) with clock frequency of 200 MHz. It can generate National Institute of Standards and Technology (NIST) SP 800-22 compatible true random bitstreams with throughput of 178 Mbps utilizing SRAM chip with 1 Mbit memory capacity. Furthermore, according to different application scenarios, the throughput can be widely scalable by adjusting clock frequency and SRAM memory capacity, which makes the novel TRNG design applicable for various Internet of Things (IOT) devices.

Molten Salt Synthesis of High-Performance, Nanostructured La0.6Sr0.4FeO3-δ Oxygen Electrode of a Reversible Solid Oxide Cell.

Nanoscale perovskite oxides with enhanced electrocatalytic activities have been widely used as oxygen electrodes of reversible solid oxide cells (RSOC). Here, La0.6Sr0.4FeO3-δ (LSF) nanoscale powder is synthesized via a novel molten salt method using chlorides as the reaction medium and fired at 850 °C for 5 h after removing the additives. A direct assembly method is employed to fabricate the LSF electrode without a pre-sintering process at high temperature. The microstructure characterization ensures that the direct assembly process will not damage the porosity of LSF. When operating as a solid oxide fuel cell (SOFC), the LSF cell exhibits a peak power density of 1.36, 1.07 and 0.7 W/cm2 at 800, 750 and 700 °C, respectively, while in solid oxide electrolysis cell (SOEC) mode, the electrolysis current density reaches 1.52, 0.98 and 0.53 A/cm2 under an electrolysis voltage of 1.3 V, respectively. Thus, it indicates that the molten salt routine is a promising method for the synthesis of highly active perovskite LSF powders for directly assembled oxygen electrodes of RSOC.

Fabrication of Lanthanum Strontium Manganite Ceramics via Agar Gel Casting and Solid State Sintering.

Fabricating lanthanum strontium manganite (LSM) ceramics with certain shapes is important for the design and construction of high-temperature energy conversion and storage devices. Here, we describe a low-cost and environmentally friendly method for fabricating LSM ceramics via agar gel casting and high temperature sintering. This new approach uses temperature tuning to fabricate LSM gel bodies, not only by manufacturing in the secondary process but also by remolding and recycling during the gel casting process. The effect of the sintering temperature on the properties of LSM ceramics was investigated as well. As a result, the porosity and compressive strength of LSM ceramics sintered at 1000 °C are ~60% and 5.6 MPa, respectively. When the sintering temperature increases to 1200 °C, the porosity decreases to ~28%, whereas the compressive strength increases to 25 MPa, which is able to meet the requirement of cathode-supported SOFCs (solid oxide fuel cells).

Large amplitude oscillatory shear behavior and gelation procedure of high and low acyl gellan gum in aqueous solution.

The rheological properties of gellan fluid gels were investigated using large amplitude oscillatory shear (LAOS) technique in both linear and non-linear viscoelastic regimes, with consideration of high acyl (HA)/low acyl (LA) gellan ratio and Ca2+ concentration. The Lissajous curves and Chebyshev coefficients were used to analyze the LAOS data and successfully provided visual and quantitative representation of microstructural differences between HA and LA gellan gum, respectively. Temperature sweep measurements were performed to monitor the gelation procedure of gellan gum solution. The results show that HA gellan gum forms softer but more stable gels than LA gellan gum, especially at high temperature. And a synergistic interaction between HA and LA gellan gum may exist in the presence of abundant Ca2+ ions. The abovementioned study can allow a better understanding of structural characteristic of gellan gum and provide a practical approach to rheological assessment that facilitates the processing and diversified application of mixed gellan gum.

A Rechargeable High-Temperature Molten Salt Iron-Oxygen Battery.

The energy and power density of conventional batteries are far lower than their theoretical expectations, primarily because of slow reaction kinetics that are often observed under ambient conditions. Here we describe a low-cost and high-temperature rechargeable iron-oxygen battery containing a bi-phase electrolyte of molten carbonate and solid oxide. This new design merges the merits of a solid-oxide fuel cell and molten metal-air battery, offering significantly improved battery reaction kinetics and power capability without compromising the energy capacity. The as-fabricated battery prototype can be charged at high current density, and exhibits excellent stability and security in the highly charged state. It typically exhibits specific energy, specific power, energy density, and power density of 129.1 Wh kg-1 , 2.8 kW kg-1 , 388.1 Wh L-1 , and 21.0 kW L-1 , respectively, based on the mass and volume of the molten salt.

Construction and development of an auto-regulatory gene expression system in Bacillus subtilis.

BACKGROUND: Bacillus subtilis is an all-important Gram-positive bacterium of valuable biotechnological utility that has been widely used to over-produce industrially and pharmaceutically relevant proteins. There are a variety of expression systems in terms of types of transcriptional patterns, among which the auto-inducible and growth-phase-dependent promoters are gaining increasing favor due to their inducer-independent feature, allowing for the potential to industrially scale-up. To expand the applicability of the auto-inducible expression system, a novel auto-regulatory expression system coupled with cell density was constructed and developed in B. subtilis using the quorum-sensing related promoter srfA (PsrfA). RESULTS: The promoter of the srf operon was used to construct an expression plasmid with the green fluorescent protein (GFP) downstream of PsrfA. The expression displayed a cell-density-dependent pattern in that GFP had a fairly low expression level at the early exponential stage and was highly expressed at the late exponential as well as the stationary stages. Moreover, the recombinant system had a similar expression pattern in wild-type B. subtilis 168, WB600, and WB800, as well as in B. subtilis 168 derivative strain 1681, with the complete deletion of PsrfA, indicating the excellent compatibility of this system. Noticeably, the expression strength of PsrfA was enhanced by optimizing the -10 and -35 core sequence by substituting both sequences with consensus sequences. Importantly, the expression pattern was successfully developed in an auto-regulatory cell-density coupling system by the simple addition of glucose in which GFP could not be strongly expressed until glucose was depleted, resulting in a greater amount of the GFP product and increased cell density. The expression system was eventually tested by the successful over-production of aminopeptidase to a desired level. CONCLUSION: The auto-regulatory cell density coupling system that is mediated by PsrfA is a novel expression system that has an expression pattern that is split between cell-growth and over-expression, leading to an increase in cell density and elevating the overall expression levels of heterologously expressed proteins. The broad applicability of this system and inducer-free expression property in B. subtilis facilitate the industrial scale-up and medical applications for the over-production of a variety of desired proteins.

Syngas production by high temperature steam/CO2 coelectrolysis using solid oxide electrolysis cells.

High temperature (HT) steam/CO2 coelectrolysis with solid oxide electrolysis cells (SOECs) using the electricity and heat generated from clean energies is an important alternative for syngas production without fossil fuel consumption and greenhouse gas emissions. Herein, reaction characteristics and the outlet syngas composition of HT steam/CO2 coelectrolysis under different operating conditions, including distinct inlet gas compositions and electrolysis current densities, are systematically studied at 800 °C using commercially available SOECs. The HT coelectrolysis process, which has comparable performance to HT steam electrolysis, is more active than the HT CO2 electrolysis process, indicating the important contribution of the reverse water-gas shift reaction in the formation of CO. The outlet syngas composition from HT steam/CO2 coelectrolysis is very sensitive to the operating conditions, indicating the feasibility of controlling the syngas composition by varying these conditions. Maximum steam and CO2 utilizations of 77% and 76% are achieved at 1.0 A cm(-2) with an inlet gas composition of 20% H2/40% steam/40% CO2.

Alp13, an MRG family protein, is a component of fission yeast Clr6 histone deacetylase required for genomic integrity.

The post-translational modifications of histones are key to the modulation of chromatin structure. Distinct patterns of modifications established by histone-modifying enzymes control diverse chromosomal processes. Here, we report the purification and molecular characterization of the fission yeast Clr6 histone deacetyl ase involved in higher order chromatin assembly. We show that a chromodomain protein Alp13, which belongs to the conserved MRG protein family linked to cellular senescence in humans, is associated with Clr6. In addition, Clr6 interacts with homologs of the mammalian transcriptional co-repressors Sin3, Pst1 and Pst2, and a WD40 repeat-containing protein, Prw1. Alp13, Pst2 and Prw1 form a stable complex with Clr6 in the nucleus. Deletion of any of these factors causes progressive loss of viability and sensitivity to DNA-damaging agents, and impairs condensation/resolution of chromosomes during mitosis. This is accompanied by hyperacetylation of histones and a reduction in histone H3 Ser10 phosphorylation, which correlates with chromosome condensation during mitosis. These results link the MRG family protein Alp13 to histone deacetylation, and suggest that Clr6 and its associated factors are essential for fundamental chromosomal events.

Recruitment of cohesin to heterochromatic regions by Swi6/HP1 in fission yeast.

Fission yeast centromeres, like those of higher eukaryotes, are composed of repeated DNA structures and associated heterochromatin protein complexes, that have a critical function in the faithful segregation of chromosomes during cell division. Cohesin protein complexes, which are essential for sister-chromatid cohesion and proper chromosome segregation, are enriched at centromeric repeats. We have identified a functional and physical link between heterochromatin and cohesin. We find that the preferential localization of cohesins at the centromeric repeats is dependent on Swi6, a conserved heterochromatin protein that is required for proper kinetochore function. Cohesin is also enriched at the mating-type heterochromatic region in a manner that depends on Swi6 and is required to preserve the genomic integrity of this locus. We provide evidence that a cohesin subunit Psc3 interacts with Swi6 and its mouse homologue HP1. These data define a conserved function of Swi6/HP1 in recruitment of cohesin to heterochromatic regions, promoting the proper segregation of chromosomes.