Metagenome reveals the possible mechanism that microbial strains promote methanogenesis during anaerobic digestion of food waste.

For better understanding the mechanism of microbial strains promoting methane production, four strains Hungatella xylanolytica A5, Bacillus licheniformis B1, Paraclostridium benzoelyticum C2 and Advenella faeciporci E1 were inoculated into anaerobic digestion systems. After bioaugmentation, the cumulative methane production of A5, B1, C2 and E1 groups elevated by 11.68%, 8.20%, 18.21% and 15.67% compared to CK group, respectively. The metagenomic analysis revealed that the species diversity and uniformity of the experimental groups was improved, and hydrolytic acidifying bacteria, represented by Clostridiaceae, Anaerolineaceae and Oscillospiraceae, and methanogens, such as Methanotrichaceae and Methanobacteriaceae, were enriched. Meanwhile, the abundance of key genes in carbohydrate, pyruvate and methane metabolism was increased in the inoculated groups, providing reasonable reasons for more methane production. The strengthening mechanism of microbial strains in this study offered a theoretical foundation for selecting a suitable bioaugmentation strategy to solve the problems of slow start-up and low methane production in anaerobic digestion.

Evaluating the potential of different bioaugmented strains to enhance methane production during thermophilic anaerobic digestion of food waste.

Bioaugmentation technology for improving the performance of thermophilic anaerobic digestion (TAD) of food waste (FW) treatment is gaining more attention. In this study, four thermophilic strains (Ureibacillus suwonensis E11, Clostridium thermopalmarium HK1, Bacillus thermoamylovorans Y25 and Caldibacillus thermoamylovorans QK5) were inoculated in the TAD of FW system, and the biochemical methane potential (BMP) batch study was conducted to assess the potential of different bioaugmented strains to enhance methane production. The results showed that the cumulative methane production in groups inoculated with E11, HK1, Y25 and QK5 improved by 2.05%, 14.54%, 19.79% and 9.17%, respectively, compared with the control group with no inoculation. Moreover, microbial community composition analysis indicated that the relative abundance of the main hydrolytic bacteria and/or methanogenic archaea was increased after bioaugmentation, and the four strains successfully became representative bacterial biomarkers in each group. The four strains enhanced methane production by strengthening starch, sucrose, galactose, pyruvate and methane metabolism functions. Further, the correlation networks demonstrated that the representative bacterial genera had positive correlations with the differential metabolic functions in each bioaugmentation group. This study provides new insights into the TAD of FW with bioaugmented strains.

Metagenomic characterization of the enhanced performance of multicomponent synergistic thermophilic anaerobic co-digestion of food waste utilizing kitchen waste or garden waste as co-substrate.

Food waste (FW) single-substrate anaerobic digestion usually suffers from rapid acidification and inhibition of oil and salt. To overcome these problems and improve the process efficiency, supplementing other substrates has been used in FW anaerobic digestion. This study investigated the biogas production potential through co-digestion of FW with kitchen waste (KW) or garden waste (GW) in different ratios under thermophilic conditions. The results showed that the optimal ratios were FW:KW=60:40 and FW:GW=80:20 which biogas production improved 73.33% and 68.45% compared with single FW digestion, respectively. The organic matter removal rate of co-digestion was 84.46% for FW+KW group (RFK) and 65.64% for FW+GW group (RFG). Co-digestion increased the abundance of the dominant hydrolytic bacteria Defluviitoga and Hydrogenispora and hydrogenotrophic methanogen Methanoculleus. Furthermore, glycoside hydrolases (GHs), vital carbohydrate-active enzymes (CAZymes), were improved by co-digestion. Co-digestion could also effectively promote the function of cellulase and hemicellulose. This strategy for utilizing different organic wastes together as co-substrate provides a new avenue for bioenergy production.

Reduction of mRNA m6A associates with glucose metabolism via YTHDC1 in human and mice.

AIMS: N6-methyladenosine (m6A) in mRNA is involved in glucose metabolism. Our goal is to investigate the relationship of glucose metabolism, m6A and YTH domain-containing protein 1 (YTHDC1), a binding protein to m6A, in the development of type 2 diabetes (T2D). METHODS: HPLC-MS/MS and qRT-PCR were used to quantify m6A and YTHDC1 levels in white blood cells from patients with T2D and healthy individuals. MIP-CreERT and tamoxifen treatment were used to create ß-cell Ythdc1 knockout mice (ßKO). m6A sequencing and RNA sequencing were performed in wildtype/ßKO islets and MIN6 cells to identify the differential genes. RESULTS: In T2D patients, both of m6A and YTHDC1 levels were reduced and associated with fasting glucose. Deletion of Ythdc1 resulted in glucose intolerance and diabetes due to decreased insulin secretion, even though ß-cell mass in ßKO mice was comparable to wildtype mice. Moreover, Ythdc1 was shown to bind to SRSF3 (serine/arginine-rich splicing factor 3) and CPSF6 (cleavage and polyadenylation specific factor 6) in ß-cells. CONCLUSIONS: Our data suggested that YTHDC1 may regulate mRNA splicing and export by interacting with SRSF3 and CPSF6 to modulate glucose metabolism via regulating insulin secretion, implying YTHDC1 might be a novel potential target for lowing glucose.

A facile green "wastes-treat-wastes" strategy: Electrogenerated chloramines for nanofiltration concentrate recirculation.

Use of nanofiltration (NF) membrane to reuse the secondary wastewater suffers from severer biofouling and refractory concentrate. To realize sustainable NF membrane processes in water purification, the electro-oxidation (EO) process using boron-doped diamond (BDD) anodes was applied in current study to treat the NF concentrate for removal of organic contaminates and nutrients using simultaneously controllable in-situ generation of chloramines. The electrolytic effluent would be mixed with the raw secondary wastewater as the feed of subsequent NF process for conducting chloramination to mitigate membrane biofouling. It was found that under a constant current density of 30 mA/cm2, the chloramine formed with the electrolysis while its concentration reached the maximum at 30 min of electrolysis when NH3-N was 7 mg/L and Cl- concentration was below 500 mg/L. The complete elimination of antibiotics and bacteria can be attained in the hybrid NF-EO process thanks to the in-situ simultaneous generation of large amount of chloramine. In particular, the membrane biofouling was effectively alleviated to maintain a stable permeate flux during the 160-h period of sustainable operation. Our study provides a promising "wastes-treat-wastes" strategy for sustainable reuse of secondary wastewater.

Integrated electro-coagulation and gravity driven ceramic membrane bioreactor for roofing rainwater purification: Flux improvement and extreme operating case.

The collected roofing rainwater with high water quality and large water volume, can alleviate the crisis of water resources and fit the Low-Impact Development (LID) concept. In this work, a novel water purification technology, Electro-Coagulation coupled with Gravity-Driven Ceramic Membrane Bio-Reactor (EC-GDCMBR) was developed for the roofing rainwater purification under long-term operation (136 days). EC-GDCMBR system not only exhibited the better effluent quality, but also obtained the greater flux (~32 LMH). The reason contributed to the high permeability of ceramic membrane and large porosity of biofilm formed by floc growth (~36 µm) during the EC process, which was also proved by SEM image. The coagulation, adsorption, biodegradation, and coprecipitation of EC-GDCMBR was able to synergistically remove the particulate matter, ammonia nitrogen (NH3-N), Total Phosphorus (TP), organic substances, and heavy metal (i.e., Cr, Zn, and Cu). In particular, via the analysis of bacterial abundance, Extracellular Polymeric Substances (EPS), Assimilable Organic Carbon (AOC), Adenosine Tri-Phosphate (ATP) and Confocal Laser Scanning Microscopy (CLSM), EC could sweep most free bacteria on the ceramic membrane surface, enhancing the biological purification efficiency. Furthermore, a large amount of Pseudomonas (12.4 %-66.7 %) and Nitrospira (1.46 %-3.16 %) in the aggregates formed the biofilms, improved the NH3-N removal. During the long-term operation, there are some unavoidable problems, such as the thick and ripened biofilm of EC-GDCMBR would crack and fall off. Based on this, the current work also studied the reliability of GDCMBR under "extreme operating case", and the results showed that neither the biofilm detachment nor the biofilm breakup had a significant impact on the effluent quality. Overall, the findings of this study suggest the reliability of EC-GDCMBR for the sustainable operation of roofing rainwater purification and improve the application value of decentralized rainwater harvest device.

Rheological characterization of biofouling layers developing in nanofiltration processes：macroscale rheological properties of biofouling layer and micro fluid field.

Nanofiltration (NF) membrane promotes the rapid development of reclaimed water treatment technology. Biofouling significantly limits NF membranes' performance in the case of wastewater treatment. The rheological characteristics of NF biofouling layer and the microfluid field on the vicinity of membrane surface determine the strategies for alleviating biofouling. Here, we tested the biofouling layer generated on NF in a parallel plate rheometer operated in oscillation and stable shear mode, along with shear stress calculation using computational fluid dynamic simulations on the membrane surface. Results indicated that the biofouling layer was typical viscoelastic material, and the yield stress exhibited shear thinning behavior. The biofouling layer tended to show elasticity during long-term operation, and with higher COD content formed, showed stronger elasticity, larger viscosity, and yield stress. Compared with the shear stress on the membrane surface obtained using numerical simulation (0.57 Pa~1.22 Pa), the yield stress (0.59 Pa~266.98 Pa) of NF biofouling layer was relatively large. Our results suggest that the shear stress generated by water flow may not effectively cause formed biofouling layer shedding. The research will provide theoretical and technical support for biofouling control in NF membrane systems and can be applied in advanced wastewater treatment and reclamation processes.

Visible LED photocatalysis combined with ultrafiltration driven by metal-free oxygen-doped graphitic carbon nitride for sulfamethazine degradation.

A novel visible light emitting diode (LED) photocatalysis combined ultrafiltration (UF) system driven by metal-free O-doped C3N4 was established for sulfamethazine (SMZ) removal in environmental remediation. Among different O-doping ratios, 8%O-C3N4 exhibited the optimal SMZ degradation efficiency (89.36%) and the flux of 8%O-C3N4/LED/UF system could reach up to 38.92 L/m2/h. Benefitting from the O-doping, the synergetic effect of the expansion of visible-light absorption, enhancement of electron redox capacity, and improvement of e--h+ separation efficiency could produce the intensified photoactivity. Superoxide radical (O2•-) and single oxygen (1O2) were proved to be the primary active species by EPR and quenching tests. Moreover, the influence of several parameters such as photocatalyst dosage, SMZ concentration, raw turbidity and humic acid concentration in 8%O-C3N4/LED/UF system on SMZ removal were systematically studied. Under simulated surface water matrix, 8%O-C3N4/LED/UF system could also remove 96.88% SMZ and stable membrane flux stabilized as high as 33.36 L/m2/h. This study makes a demonstration for applying highly-effective powdery photocatalysts in the actual wastewater treatment and designing future photocatalytic reactors.

Multivariate insights into enhanced biogas production in thermophilic dry anaerobic co-digestion of food waste with kitchen waste or garden waste: Process properties, microbial communities and metagenomic analyses.

Multisubstrate synergetic anaerobic co-digestion can effectively overcome low efficiency of food waste (FW) mono-digestion. This study investigated the effect of supplementing FW with kitchen waste (KW) or garden waste (GW) on thermophilic dry anaerobic co-digestion. FW-KW and FW-GW co-digestion enhanced biogas production by 24.69 % and 44.96 % at organic loading rate (OLR) of 3 g VS L-1 d-1, and increased OLR tolerance from 3 to 4 g VS L-1 d-1 through mitigating ammonia nitrogen inhibition and volatile fatty acids accumulation. Co-digestion enriched the dominant hydrolytic bacteria Defluviitoga, resulting in an acceleration of substrate hydrolysis. FW-KW co-digestion improved biogas production by increasing gene abundance related to key enzymes in methanogenesis pathways and promoting the conversion of intermediate products into methane. FW-GW co-digestion enhanced biogas production by enriching ABC transporters-associated genes, leading to efficient substrate utilization. This study provides a promising approach for FW treatment with multivariate insights into thermophilic dry anaerobic co-digestion.

Degradation of antibiotics, organic matters and ammonia during secondary wastewater treatment using boron-doped diamond electro-oxidation combined with ceramic ultrafiltration.

In this study, a BDD electrolytic oxidation-ceramic membrane ultrafiltration (EO-CM) system for the removals of antibiotics, organic matters and ammonia in wastewater was evaluated. Sulfamethazine (SMZ) was degraded following a pseudo first-order kinetics. The removal rate of SMZ improved with the increase of electro-oxidation time (0-60 min) and current density (5-30 mA/cm2). During the BDD electro-oxidation process, H2O2 and hydroxyl radicals (•OH) were generated which were detected by N, N-diethyl-p-phenylenediamine (DPD) method and electron paramagnetic resonance spectroscopy (EPR), respectively. Chemical oxygen demand (COD) was able to be removed by EO and CM processes, in which proteins and humic acids were regarded as the main removed components measured using excitation-emission matrix (EEM) technique. Moreover, BDD electro-oxidation pretreatment could make the CM process maintain a high water flux and significantly control the membrane fouling and relieve transmembrane pollution. In addition, the removal of ammonia was enhanced with the increase of chloride ions (Cl-) in wastewater during EO process due to the generation of active chlorine (i.e., ClO-, HClO, or Cl2) from the oxidation of Cl-. Chloramine and nitrogen were produced in the oxidation of ammonia by active chlorine. Overall, the results of this study suggest that BDD EO-CM system is a promising process for removing antibiotics, organic matters and ammonia.

An electro-oxidation reactor for treatment of nanofiltration concentrate towards zero liquid discharge.

Nanofiltration (NF) concentrate generated from the secondary wastewater treatment contains high concentration of ammonium nitrogen and refractory organics, thus having great environmental risks. In this study, an electro-oxidation (EO) reactor built up with a boron-doped diamond (BDD) anode is utilized to treat the NF concentrate. To reach "zero liquid discharge", a mixture of the electrolytic effluent and the raw secondary wastewater was collected and transported back to the NF module. Results show that under the current density of 30 mA·cm-2, most of ammonia nitrogen was decomposed into N-gases within 30 min due to the active chlorine radicals generated in the electrochemical process. Moreover, the EO reactor completely eliminated antibiotics, humic acids and bacteria in the NF concentrate under long electrolysis time of 60 min. In particular, the organic pollutants removal rate was kept at a stable value in the EO reactor for a long-term operation of up to 120 h. In addition, the NF membrane remained a constant permeate flux without being affected by the membrane biofouling caused by organic components in wastewater. Our study highlights the potential of the NF-EO process as a "zero liquid discharge" approach for treatment of the secondary wastewater.

Gravity-driven ceramic membrane (GDCM) filtration treating manganese-contaminated surface water: Effects of ozone(O3)-aided pre-coating and membrane pore size.

Achieving adequate manganese removal during water treatment is a challenging process. This study aimed to assess the effectiveness of gravity driven ceramic membrane (GDCM) filtration in the elimination of manganese from surface water. The impact of membrane pre-modification with birnessite and molecular weight cut-off on long-term water treatment efficiency was investigated by assessing filtration units with 300 kDa virgin membrane (300 kDa-blank), 300 kDa membrane pre-coated with manganese oxides (300 kDa-MnOx), and 15 kDa virgin membrane (15 kDa-blank). The results of 300 kDa-blank and 300 kDa-MnOx indicated that depositing manganese oxides (produced via ozone (O3) oxidation) prior to water treatment was conducive to ripening of cake layer which played a major role in Mn removal. Reducing membrane molecular cut-off from 300 to 15 kDa also significantly reduced permeate Mn concentration, achieving a removal efficiency of 75% at the end of the trial (highest of all the units). Relative to 300 kDa-blank, the greater manganese removals in the other two systems can be attributed to 1) the long hydraulic retention times resulting from the higher membrane resistance, and 2) the higher abundance of biologically produced Birnessite materials in the cake layers for manganese oxidation. Raman analysis and X-ray diffraction analysis showed that 15 kDa-blank achieved the highest level of Birnessite production and most cake materials featured a flower-like structure and relatively small size (as shown under a scanning electron microscope and Energy Dispersive X-Ray Spectroscopy element mapping analysis), suggesting a higher surface area for Mn oxidation.

Chronological Changes of Viral Shedding in Adult Inpatients With COVID-19 in Wuhan, China.

BACKGROUND: In December 2019, the coronavirus disease 2019 (COVID-19) caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) broke out in Wuhan. Epidemiological and clinical characteristics of patients with COVID-19 have been reported, but the relationships between laboratory features and viral load has not been comprehensively described. METHODS: Adult inpatients (≥18 years old) with COVID-19 who underwent multiple (≥5 times) nucleic acid tests with nasal and pharyngeal swabs were recruited from Renmin Hospital of Wuhan University, including general patients (n = 70), severe patients (n = 195), and critical patients (n = 43). Laboratory data, demographic data, and clinical data were extracted from electronic medical records. The fitted polynomial curve was used to explore the association between serial viral loads and illness severity. RESULTS: Viral load of SARS-CoV-2 peaked within the first few days (2-4 days) after admission, then decreased rapidly along with virus rebound under treatment. Critical patients had the highest viral loads, in contrast to the general patients showing the lowest viral loads. The viral loads were higher in sputum compared with nasal and pharyngeal swab (P = .026). The positive rate of respiratory tract samples was significantly higher than that of gastrointestinal tract samples (P < .001). The SARS-CoV-2 viral load was negatively correlated with portion parameters of blood routine and lymphocyte subsets and was positively associated with laboratory features of cardiovascular system. CONCLUSIONS: The serial viral loads of patients revealed whole viral shedding during hospitalization and the resurgence of virus during the treatment, which could be used for early warning of illness severity, thus improve antiviral interventions.

The association of maternal dietary folate intake and folic acid supplementation with small-for-gestational-age births: a cross-sectional study in Northwest China.

The effect of maternal folate intake on small-for-gestational-age (SGA) births remains inconclusive. The present study aimed to investigate the associations of maternal folate intake from diet and supplements with the risk of SGA births using data from a cross-sectional study in Shaanxi Province of Northwest China. A total of 7307 women who were within 12 months (median 3; 10th-90th percentile 0-7) after delivery were included. Two-level models were adopted to examine the associations of folate (dietary folate, supplemental folic acid and total folate) intake with the risk of SGA births and birth weight Z score, controlling for a minimum set of confounders that were identified in a directed acyclic graph. Results showed that a higher supplemental folic acid intake during the first trimester was negatively associated with the risk of SGA births (≤60 d v. non-use: OR 0·80; 95 % CI 0·66, 0·96; >60 d v. non-use: OR 0·78; 95 % CI 0·65, 0·94; Ptrend = 0·010; per 10-d increase: OR 0·97; 95 % CI 0·95, 0·99). A higher total folate intake during pregnancy was associated with a reduced risk of SGA births (highest tertile v. lowest tertile: OR 0·77; 95 % CI 0·64, 0·94; Ptrend = 0·010; per one-unit increase in the log-transformed value: OR 0·81; 95 % CI 0·69, 0·95). A similar pattern was observed for the birth weight Z score. Our study suggested that folic acid supplementation during the first trimester and a higher total folate intake during pregnancy were associated with a reduced risk of SGA births.