Investigation of Hydrothermal Performance in Micro-Channel Heat Sink with Periodic Rectangular Fins.

The micro-channel heat sink (MCHS) is an excellent choice due to its exceptional cooling capabilities, surpassing those of its competitors. In this research paper, a computational fluid dynamics analysis was performed to investigate the laminar flow and heat transfer characteristics of five different configurations of a variable geometry rectangular fin. The study utilized a water-cooled smooth MCHS as the basis. The results indicate that the micro-channel heat sink with a variable geometry rectangular fin has better heat dissipation capacity than a straight-type micro-channel heat sink, but at the same time, it has larger pressure loss. Based on the analysis of various rectangular fin shapes and Reynolds numbers in this study, the micro-channel heat sink with rectangular fins exhibits Nusselt numbers and friction factors that are 1.40-2.02 and 2.64-4.33 times higher, respectively, compared to the smooth heat sink. This significant improvement in performance results in performance evaluation criteria ranging from 1.23-1.95. Further, it is found that at a relatively small Reynolds number, the micro-channel heat sink with a variable geometry rectangular fin has obvious advantages in terms of overall cooling performance. Meanwhile, this advantage will decrease when the Reynolds number is relatively large.

Identification of double heterozygous -α4.2â /-α4.2â ¡ using third-generation sequencing.

OBJECTIVE: The 4.2 kb deletion (-α4.2/) is a common a+-thalassemia with a carrier rate, followed by the South-East Asian deletion (-SEA) and the 3.7 kb deletion (-α3.7/). There are few reports about 4.2 kb deletion sub-types. Herein, we present a patient with double heterozygous -α4.2Ⅰ/-α4.2Ⅱwho was identified using third-generation sequencing (TGS). METHODS: Hematology and hemoglobin fraction analysis were carried out by complete blood count (CBC) and capillary electrophoresis (CE). Gap-PCR was used to detect the common deletional α-thalassemia, and multiple ligation-dependent probe amplification (MLPA) was performed to screen the large deletion. Sanger sequencing identified the variant. The different deletions were confirmed by TGS. RESULTS: CBC showed the patient with microcytic hypochromic anemia, and CE indicated the presence of a Hb variant. Gap-PCR and MLPA detected 4.2 kb deletion homozygotes (-α4.2/-α4.2). The Hb variant was confirmed as Hb Q-Thailand by Sanger sequencing. The patient was identified as compound heterozygous of 4.2 kb deletion and Hb Q-Thailand (-α4.2/-α4.2-Q-Thailand, -α4.2Ⅰ/-α4.2Ⅱ) using TGS. CONCLUSIONS: Hb Q-Thailand (-α4.2-Q-Thailand/) complex 4.2 kb deletion heterozygote (-α4.2/) is easily misdiagnosed as 4.2 kb homozygous using Gap-PCR and MLPA. The TGS enables the identification of the two different 4.2 kb deletion sub-types.

Simultaneous Determination of Nine Phthalates in Vegetable Oil by Atmospheric Pressure Gas Chromatography with Tandem Mass Spectrometry (APGC-MS/MS).

Although the use of phthalates has been restricted worldwide, they remain an issue due to health concerns. Diet is one of the most important exposure pathways for humans and due to their solubility in oil, phthalates are commonly found in edible oil and food high in fat. Gas chromatography-mass spectrometry (GC-MS) using electron ionization (EI) has been commonly used for the analysis of the phthalates in foodstuffs, including edible oil. However, this method suffers from issues with sensitivity and selectivity, as most phthalates are fragmented to generate a common phthalic anhydride fragment ion at m/z 149. The molecular ion cannot be observed due to strong fragmentation in EI. In contrast, atmospheric pressure gas chromatography (APGC) is a soft ionization technique with less fragmentation, whereby the molecular ion can be used as the precursor ion for multiple reaction monitoring (MRM). In this study, a simple and quick method for the determination of phthalates in vegetable oil using APGC-MS/MS was developed, and performance was assessed. The method was based on dilution of the oil in solvent and direct injection without the need for further cleanup. The established method was evaluated for linearity, recovery, precision, method detection limit (MDL), and method quantitation limit (MQL). The obtained MQL in vegetable oil was in the range of 0.015-0.058 mg/kg, despite limiting the injection volume to 1 µL, which is suitable for investigating dietary exposure and future proof against decreases to the regulatory limit. Finally, the developed method was successfully applied to analyze nine phthalates in eight commercially available vegetable oil.

An automated toxicity based prioritization framework for fast chemical characterization in non-targeted analysis.

Identification of environmental pollutants with harmful effects is commonly conducted by non-targeted analysis (NTA) using liquid chromatography coupled with high-resolution mass spectrometry. Prioritization of possible candidates is important yet challenging because of the large number of candidates from MS acquisitions. We aimed to prioritize candidates to the exposure potential of organic chemicals by their toxicity and identification evidence in the matrix. We have developed an R package application, "NTAprioritization.R", for fast prioritization of suspect lists. In this workflow, the identification levels of candidates were first rated according to spectral matching and retention time prediction. The toxicity levels were rated according to candidates' toxicity of different endpoints or ToxPi score. Finally, the various levels of candidates were identified as Tier 1 - 5 descending in priority. For validation, we used this workflow to identify pollutants in a sludge water sample spiked with 28 environmental pollutants. The workflow reduced the candidate list of over 6,982 candidates to a final list of 2,779 compounds and prioritized them to 5 tiers (Tier 1 - 5), including 21 out of 28 spiked standards. Overall, this study shows the added value of an automated prioritization R package for the fast screening of environmental pollutants based on the NTA method.

Application of microdialysis combined with UHPLC-QTOF/MS to screen for endogenous metabolites in aquatic organisms as biomarkers of exposure to an emerging contaminant, triclosan.

The detection of emerging contaminants (ECs) and understanding their ecotoxicity has brought new challenges to water pollution control. Triclosan (TCS), as an emerging contaminant, is a commonly used antibacterial agent widely present in the environment. Microdialysis (MD), as a sampling technique, can overcome some of the deficiencies of traditional approaches to sampling, using sources such as blood, urine, tissue, and target organs, in terms of invasiveness, time from collection to analysis, and possible changes during sample preparation. In this study, we coupled MD with analysis using UHPLC-QTOF/MS to identify the endogenous metabolites in the liver as biomarkers of the exposure of living crucian carp to TCS. The identified biomarkers were then quantified using UHPLC-MS/MS to continuously monitor the effect of TCS on endogenous metabolites in the liver of living crucian carp, which contributes to a better understanding of the toxicological effect of TCS. The experimental results demonstrated that TCS exposure interfered with the metabolic pathways of amino acids (L-isoleucine and L-histidine), purines (xanthine and hypoxanthine), and small nerve molecules (acetylcholine and choline).

UV direct photolysis of halogenated disinfection byproducts: Experimental study and QSAR modeling.

UV direct photolysis has been used as a promising process to remove halogenated disinfection byproducts (DBPs) generated in water. In this study, experimental studies and modeling approaches were applied to investigate the UV direct photolysis rate constants for 40 kinds of halogenated DBPs. The fluence-based pseudo-first-order rate constants for the removal of halogenated DBPs under UV photolysis spanned more than 2 orders of magnitude, with a range of (0.23-29.84) × 10-4 cm2 mJ-1. DBPs with higher number of halogenated substituents featured higher photolysis rate constants. The degradation efficiencies of DBPs were also affected by the species of halogen substituents, which followed the trend of iodo- > bromo- > chloro- DBPs. A quantitative structure-activity relationship (QSAR) model was established on the basis of the observed degradation rate constant values, which contained a quantum-chemical descriptor (ELUMO-EHOMO) and a molecular descriptor (Eta_C). The calculated parameters of the developed model indicated its good robustness and high reliability. The developed QSAR model can predict the degradation rate constants for DBPs within factors of 1/3 to 3. The model was validated using application domain and visualized in a Williams plot. The selected descriptors for QSAR model can explain the reaction mechanism for UV direct photolysis.

Output optimized electret nanogenerators for self-powered long-distance optical communication systems.

High-speed optical communication systems are built for real-time, massive and remote information exchange. However, any power outage will paralyse the systems and cause a huge loss. Here we constructed a self-powered long-distance optical communication system (SLOCS) utilizing output enhanced parallel connected electret nanogenerators (NGs) as a backup power for the power outage. The output current of the electret NG was promoted from 1.45 µA to 8.14 µA through optimizing the thickness of the electret film. In the SLOCS, a coded message was successfully transmitted for 50 meters by pressing electret NGs. The as-fabricated SLOCS paves the way to a simple and cost-effective strategy for developing a reliable emergency communication system in case of power outage, simultaneously promoting the progress of self-powered electronics.

Dual-Mode Electronic Skin with Integrated Tactile Sensing and Visualized Injury Warning.

Mimicking the pressure-sensing behavior of biological skins using electronic devices has profound implications for prosthetics and medicine. The developed electronic skins based on single response mode for pressure sensing suffer from a rapid decrease in sensitivity with the increase of pressure. Their highly sensitive range covers a narrow part of tolerable pressure range of the human skin and has a weak response to the injurious high pressures. Herein, inspired by a bioluminescent jellyfish, we develop an electronic skin with dual-mode response characteristics, which is able to quantify and map the static and dynamic pressures by combining electrical and optical responses. The electronic skin shows notable changes in capacitance in the low-pressure regime and can emit bright luminescence in the high-pressure regime, which, respectively, imitates the functions of the mechanoreceptors and nociceptors in the biological skin, enabling it to sense gentle tactile and injurious pressure with sensitivities up to 0.66 and 0.044 kPa-1, respectively. The complementary highly sensitive sensing ranges of the electronic skin realize a reliable perception to different levels of pressure, and its mechanically robust and stretchable properties may find a wide range of applications in intelligent robots.

Sensitivity-Enhanced Wearable Active Voiceprint Sensor Based on Cellular Polypropylene Piezoelectret.

Wearable active sensors have extensive applications in mobile biosensing and human-machine interaction but require good flexibility, high sensitivity, excellent stability, and self-powered feature. In this work, cellular polypropylene (PP) piezoelectret was chosen as the core material of a sensitivity-enhanced wearable active voiceprint sensor (SWAVS) to realize voiceprint recognition. By virtue of the dipole orientation control method, the air layers in the piezoelectret were efficiently utilized, and the current sensitivity was enhanced (from 1.98 pA/Hz to 5.81 pA/Hz at 115 dB). The SWAVS exhibited the superiorities of high sensitivity, accurate frequency response, and excellent stability. The voiceprint recognition system could make correct reactions to human voices by judging both the password and speaker. This study presented a voiceprint sensor with potential applications in noncontact biometric recognition and safety guarantee systems, promoting the progress of wearable sensor networks.

Direct and indirect photodegradation pathways of cytostatic drugs under UV germicidal irradiation: Process kinetics and influences of water matrix species and oxidant dosing.

The ever-increasing consumption of various cytostatic drugs (CSDs) has attracted growing public concern in recent years. The photodegradation of 8 CSDs was investigated using a low-pressure UV-254Hg lamp, resulting in fluence-based first-order kinetic rate constants in the range of (0.20-6.97)×10-4cm2mJ-1. The influence of water matrix components, including natural dissolved organic matter (DOM), bicarbonate (HCO3-), nitrate (NO3-), chloride (Cl-), and sulfate (SO42-), was investigated. The degradation rates of CSDs decrease in the presence of DOM due to the competition for the UV light, but increase with addition of NO3- due to an indirect production of HO. Further investigation was carried out to evaluate the viability of UV treatment performances using two real water samples, namely treated water from a water treatment plant and secondary effluent from a wastewater treatment plant. The primary photodegradation byproducts of CSDs were identified using LC/MS/MS to investigate the mechanism of direct UV photolysis and indirect NO3--induced and DOM-induced photolysis. The degradation rates of CSDs increase significantly with the addition of H2O2 or S2O82- under UV irradiation, due to the generation of non-selective HO or selective SO4-. As an electrophilic radical, SO4- mainly reacts via electron transfer and selectively attacks certain electron-donating functional groups of CSDs.

Comparative evaluation of iodoacids removal by UV/persulfate and UV/H2O2 processes.

To develop a cost-effective method for post-formation mitigation of iodinated disinfection by-products, degradation of iodoacids by UV, UV/PS (persulfate), and UV/H2O2 was extensively investigated in this study. UV direct photolysis of 4 iodoacids followed first-order kinetics with rate constants in the range of 2.43 × 10(-4)-3.02 × 10(-3) cm(2) kJ(-1). The derived quantum yields (Ф254) of the 4 iodoacids range from 0.13 to 0.34, respectively. A quantitative structure-activity relationship (QSAR) model was subsequently established and applied to predict the direct photolysis rates of 6 other structurally similar iodoacids whose standards are commercially unavailable. At a UV dose of 140 mJ cm(-2) which is typically applied for disinfection of drinking water, the removal percentages of 4 iodoacids were only between 3.35% and 34.7%. Thus, ICH2CO2H (IAA), the most photo-recalcitrant species, was selected as the target compound for removal in the UV/PS and UV/H2O2 processes. The IAA degradation rates decreased with increasing pH from 3 to 11 in both processes. Humic acid (HA) and HCO3(-) had inhibitory effects on IAA degradation in both processes. Cl(-) adversely affected the IAA degradation in the UV/PS process but had no effect in the UV/H2O2 process. Generally, in the deionized (DI) water, surface water, treated drinking water, and secondary effluent, UV/PS process is more effective than UV/H2O2 process for IAA removal, based on the same molar ratio of oxidant: IAA. SO4(-) generated in the UV/PS process yields a greater mineralization of IAA than HO in the UV/H2O2 process. IO3(-) was the predominant end-product in the UV/PS process, while I(-) was the major end-product in the UV/H2O2 process. The respective contributions of UV, HO, and SO4(-) for IAA removal in the UV/PS process were 7.8%, 14.7%, and 77.5%, respectively, at a specific condition (1.5 µM IAA, 60 µM oxidant, and pH 7). Compared to UV/H2O2 process, UV/PS was also observed as more cost-effective process based on the electrical energy per order (EE/O) and chemical cost.

Kinetic modeling and energy efficiency of UV/H2O2 treatment of iodinated trihalomethanes.

Photodegradation of I-THMs including CHCl2I and CHI3 by the UV/H2O2 system was investigated in this study. CHCl2I and CHI3 react rapidly with hydroxyl radical (OH) produced by the UV/H2O2 system, with second-order rate constants of 8.0 × 10(9) and 8.9 × 10(9) M(-1) s(-1), respectively. A fraction of CHCl2I could be completely mineralized within 15 min and the remaining fraction was mainly converted to formic acid (HCO2H). Cl(-) and I(-) were identified as the predominant end-products. No ClO3(-) was observed during the photodegradation process, while IO3(-) was detected but at less than 2% of the total liberated iodine species at the end of the reaction. The effects of pH, H2O2 dose, and matrix species such as humic acid (HA), HCO3(-), SO4(2-), Cl(-), NO3(-) on the photodegradation kinetics were evaluated. The steady-state kinetic model has been proven to successfully predict the destruction of CHCl2I and CHI3 by UV/H2O2 in different water matrices. On this basis, the kinetic model combined with electrical energy per order (EE/O) concept was applied to evaluate the efficiency of the photodegradation process and to optimize the H2O2 dose for different scenarios. The optimal H2O2 doses in deionized (DI) water, model natural water, and surface water are estimated at 5, 12, and 16 mg L(-1), respectively, which correspond to the lowest total energy consumption (EE/Ototal) of 0.2, 0.31, and 0.45 kWhm(-3)order(-1).

Photodegradation of iodinated trihalomethanes in aqueous solution by UV 254 irradiation.

Photodegradation of 6 iodinated trihalomethanes (ITHMs) under UV irradiation at 254 nm was investigated in this study. ITHMs underwent a rapid photodegradation process through cleavage of carbon-halogen bond with first-order rate constants in the range of 0.1-0.6 min(-1). The effects of matrix species including nitrate, humic acid (HA), bicarbonate, sulfate, and chloride were evaluated. The degradation rate increased slightly in the presence of nitrate possibly due to generation of HO at a low quantum yield via direct photolysis of nitrate, while HA lowered the photodegradation rate of ITHMs due to its competitive UV absorption. Moreover, bicarbonate, sulfate, and chloride had no significant effect on photodegradation kinetics, as there is no UV absorption for these 3 species. In the study using surface water, treated water, and secondary effluent from a wastewater treatment plant, high turbidity and natural organic matters present in the water inhibited the photodegradation of ITHMs. The degradation rates of 6 ITHMs in UV/H2O2 system were rather comparable and significantly higher than those achieved in the UV system without H2O2. To develop a quantitative structure-reactivity relationship (QSAR) model, the logarithm of measured first-order rate constants was correlated with a number of molecular descriptors. The best correlation was obtained with a combination of 3 molecular descriptors, namely the bond strength of carbon-halogen to be broken in the rate-determining step, steric and electronic effects of all substituents to the carbon center.

A micro-imaging study linking bone cancer pain with tumor growth and bone resorption in a rat model.

Bone metastases represent a frequent complication of advanced breast cancer. As tumor growth-induced bone remodeling progresses, episodes of severe pain and fractures of weight-bearing limbs increase. All of these skeletal-related events influence the patient's quality of life and survival. In the present study, we sought to determine whether some of these pain-related behaviors could be directly correlated to tumor progression and bone remodeling. For this purpose, we used a rat model of bone cancer pain based on the implantation of mammary carcinoma cells in the medullary cavity of the femur. The bone content and tumor growth were monitored over time by magnetic resonance imaging (MRI) and micro X-ray computed tomography (µCT). The same animals were evaluated for changes in their reflexive withdrawal responses to mechanical stimuli (allodynia) and weight-bearing deficits. As assessed by MRI, we found a negative correlation between tumor volume and allodynia or postural deficits throughout the experiment. Using µCT, we found that the bone volume/total volume (BV/TV) ratios for trabecular and cortical bone correlated with both mechanical hypersensitivity and weight-bearing impairment. However, whereas trabecular BV/TV stabilized between days 7 and 10 post-tumor detection, the cortical bone loss reached its maximum at that time. Our imaging approach also allowed us to consistently detect the tumor before the onset of pain, paving the way for the preemptive identification of at-risk patients. Altogether, these results improve our understanding of the events leading to tumor-induced bone pain and could eventually help in the design of novel strategies for the management of bone diseases.

WNT16 influences bone mineral density, cortical bone thickness, bone strength, and osteoporotic fracture risk.

We aimed to identify genetic variants associated with cortical bone thickness (CBT) and bone mineral density (BMD) by performing two separate genome-wide association study (GWAS) meta-analyses for CBT in 3 cohorts comprising 5,878 European subjects and for BMD in 5 cohorts comprising 5,672 individuals. We then assessed selected single-nucleotide polymorphisms (SNPs) for osteoporotic fracture in 2,023 cases and 3,740 controls. Association with CBT and forearm BMD was tested for ∼2.5 million SNPs in each cohort separately, and results were meta-analyzed using fixed effect meta-analysis. We identified a missense SNP (Thr>Ile; rs2707466) located in the WNT16 gene (7q31), associated with CBT (effect size of -0.11 standard deviations [SD] per C allele, P = 6.2 × 10(-9)). This SNP, as well as another nonsynonymous SNP rs2908004 (Gly>Arg), also had genome-wide significant association with forearm BMD (-0.14 SD per C allele, P = 2.3 × 10(-12), and -0.16 SD per G allele, P = 1.2 × 10(-15), respectively). Four genome-wide significant SNPs arising from BMD meta-analysis were tested for association with forearm fracture. SNP rs7776725 in FAM3C, a gene adjacent to WNT16, was associated with a genome-wide significant increased risk of forearm fracture (OR = 1.33, P = 7.3 × 10(-9)), with genome-wide suggestive signals from the two missense variants in WNT16 (rs2908004: OR = 1.22, P = 4.9 × 10(-6) and rs2707466: OR = 1.22, P = 7.2 × 10(-6)). We next generated a homozygous mouse with targeted disruption of Wnt16. Female Wnt16(-/-) mice had 27% (P<0.001) thinner cortical bones at the femur midshaft, and bone strength measures were reduced between 43%-61% (6.5 × 10(-13)

The calcium-sensing receptor complements parathyroid hormone-induced bone turnover in discrete skeletal compartments in mice.

Although the calcium-sensing receptor (CaSR) and parathyroid hormone (PTH) may each exert skeletal effects, it is uncertain how CaSR and PTH interact at the level of bone in primary hyperparathyroidism (PHPT). Therefore, we simulated PHPT with 2 wk of continuous PTH infusion in adult mice with deletion of the PTH gene (Pth(-/-) mice) and with deletion of both PTH and CaSR genes (Pth(-/-)-Casr (-/-) mice) and compared skeletal phenotypes. PTH infusion in Pth(-/-) mice increased cortical bone turnover, augmented cortical porosity, and reduced cortical bone volume, femoral bone mineral density (BMD), and bone mineral content (BMC); these effects were markedly attenuated in PTH-infused Pth(-/-)-Casr(-/-) mice. In the absence of CaSR, the PTH-stimulated expression of receptor activator of nuclear factor-κB ligand and tartrate-resistant acid phosphatase and PTH-stimulated osteoclastogenesis was also reduced. In trabecular bone, PTH-induced increases in bone turnover, trabecular bone volume, and trabecular number were lower in Pth(-/-)-Casr(-/-) mice than in Pth(-/-) mice. PTH-stimulated genetic markers of osteoblast activity were also lower. These results are consistent with a role for CaSR in modulating both PTH-induced bone resorption and PTH-induced bone formation in discrete skeletal compartments.

Determination of radon using solid state nuclear tracks wireless sensing method.

The aim of this paper is to develop a solid state nuclear tracks (SSNTs) wireless magnetoelastic sensing method for the determination of radon. In this method, wireless sensors for detecting radon are fabricated by coating polymethyl methacrylate (PMMA) film on the surface of magnetoelastic foils. The magnetoelastic sensing technique has the unique characteristic of being able to wirelessly detect resonance frequency shifts of a magnetoelastic foil in response to differences in the mass of foil. When the sensor is exposed to the environment containing radon, the PMMA film on the sensor is attacked by alpha-particles emitted from radon, generating latent SSNTs. After the sensor is chemically etched, the latent SSNTs in the PMMA film are enlarged and the sensor loses a certain mass, resulting in a shift in resonance frequency of the sensor. Consequently, the radon concentration can be determined by measuring the shift in resonance frequency. Under the conditions of the etchant concentration, etching temperature and etching time being 20% (w/w), 80°C and 18 min, respectively, the linear range for the determination of radon is 1.20×10(5) to 3.60337199×10(6) Bq m(-3) h with the detection limit of 20.3×10(3) Bq m(-3) h. The method has been applied for the determination of radon in air samples with satisfactory results.

Alterations in phosphorus, calcium and PTHrP contribute to defects in dental and dental alveolar bone formation in calcium-sensing receptor-deficient mice.

To determine whether the calcium-sensing receptor (CaR) participates in tooth formation and dental alveolar bone development in mandibles in vivo, we examined these processes, as well as mineralization, in 2-week-old CaR-knockout (CaR(-/-)) mice. We also attempted to rescue the phenotype of CaR(-/-) mice by genetic means, in mice doubly homozygous for CaR and 25-hydroxyvitamin D 1alpha-hydroxylase [1alpha(OH)ase] or parathyroid hormone (Pth). In CaR(-/-) mice, which exhibited hypercalcemia, hypophosphatemia and increased serum PTH, the volumes of teeth and of dental alveolar bone were decreased dramatically, whereas the ratio of the area of predentin to total dentin and the number and surface of osteoblasts in dental alveolar bone were increased significantly, as compared with wild-type littermates. The normocalcemia present in CaR(-/-);1alpha(OH)ase(-/-) mice only slightly improved the defects in dental and alveolar bone formation observed in the hypercalcemic CaR(-/-) mice. However, these defects were completely rescued by the additional elimination of hypophosphatemia and by an increase in parathyroid hormone-related protein (PTHrP) expression in the apical pulp, Hertwig's epithelial root sheath and mandibular tissue in CaR(-/-); Pth(-/-) mice. Therefore, alterations in calcium, phosphorus and PTHrP contribute to defects in the formation of teeth and alveolar bone in CaR-deficient mice. This study indicates that CaR participates in the formation of teeth and in the development of dental alveolar bone in mandibles in vivo, although it appears to do so largely indirectly.

An efficient synthesis of chiral phosphinyl oxide pyrrolidines and their application to asymmetric direct aldol reactions.

Chiral pyrrolidine-based phosphinyl oxides were synthesized and their performance as organocatalysts for asymmetric direct aldol reactions was evaluated. High enantioselectivities and diastereoselectivies were achieved for a range of cyclic ketones and aromatic aldehydes.