Comprehensive effects of grain-size modification of electrolytic manganese residue on deep dehydration performance and microstructure of sludge.

As the by-product accompanied by sewage treatment, sludge has complex composition and high moisture content, therefore, its reutilization and disposal are still a challenge. In this paper, five kinds of quartz sand conditioners with different particle sizes (denoted as QS1, QS2, QS3, QS4 and QS5, respectively) were used to explore the effect of particle size distribution of conditioners on sludge dewatering performance. The moisture content, capillary suction time (CST), time to filter (TTF), specific resistance of filtration (SRF), particle size distribution curve, pore distribution law, scanning electron microscopy, isothermal adsorption-desorption curve and extracellular polymeric substances distribution were employed to characterize the modified sludge and explore the improvement mechanism. The results show that the particle size distribution of the conditioner significantly affects the efficiency of sludge dewatering. The wt% of sludge regulated with QS1 (QS1-S) could be reduced to 52%, and its CST value, TTF value and SRF value is 57.93 s, 278 s and 1.84 × 108 s2 g-1, respectively. The conjecture about the effect of difference of particle size distribution on sludge dewatering performance was verified with the original Electrolytic Manganese Residue (EMR) and the grain-size modified Electrolytic Manganese Residue (EMR6). Compared with those of the EMR-conditioned sludge, the CST, TTF and SRF of EMR6-conditioned sludge was decreased by 8.7%, 22.3% and 11.2%, respectively. According to analysis of surface microstructure, the surface of the sludge cake modified with QS1 is rough and sparse with rich pore structure. Compared with those of the undisturbed sludge (A0), the pore volume and specific surface area of the sludge modified with QS1 was increased by 61.65% and 38.62%, respectively. After grain-size modification, the dehydration effect of EMR6 (D10 4.25 µm, D50 19.65 µm, D90 73.26 µm) was significantly enhanced, and the D10, D50 and D90 value was close to that of QS1. It can be concluded that the particle size of QS1 (D10 3.27 µm, D50 15.66 µm, and D90 62.23 µm) can improve the dewatering performance of sludge by shearing the sludge particles to change the original sludge particle size distribution and improving the blockage of sludge dewatering channels.

Electromyographical study on muscle fatigue in repetitive forearm tasks / 华中科技大学学报（医学）（英德文版）

The purpose of this study was to examine whether repetitive muscle tasks in low weight load might influence the fatigue of forearm muscles, and to identify ergonomic risk factors of forearm muscle fatigue in these tasks. Sixteen healthy male volunteers performed eight wrist extensions in different frequency, weight and angle loads while being instructed to keep a dominant upper limb posture as constant as possible. Surface electromyograph (sEMG) was recorded from right extensors digitorium (ED), flexor carpi radialis (FCR), flexor carpi ulnaris (FCU) and extensor carpi ulnaris (ECU) during the task performance. Our results showed that mean power frequency (MPF) and median frequency (MF) values of ED, FCR and FCU were significantly lower (P<0.05) at high frequency load level than at low load level. However, MPF and MF values of ED were significantly lower (P<0.01) in higher load groups of frequency, angle and weight than in lower load groups. These results indicated that the fatigue of muscles varied in the same task, and the number-one risk factor of ECU, ED and FCR was angle load.

Electromyographical Study on Muscle Fatigue in Repetitive Forearm Tasks / 华中科技大学学报（医学）（英德文版）

The purpose of this study was to examine whether repetitive muscle tasks in low weight load might influence the fatigue of forearm muscles, and to identify ergonomic risk factors of forearm muscle fatigue in these tasks. Sixteen healthy male volunteers performed eight wrist extensions in different frequency, weight and angle loads while being instructed to keep a dominant upper limb posture as constant as possible. Surface electromyograph (sEMG) was recorded from right extensors digitorium (ED), flexor carpi radialis (FCR), flexor carpi ulnaris (FCU) and extensor carpi ulnaris (ECU) during the task performance. Our results showed that mean power frequency (MPF) and median frequency (MF) values of ED, FCR and FCU were significantly lower (P＜0.05) at high frequency load level than at low load level. However, MPF and MF values of ED were significantly lower (P＜0.01) in higher load groups of frequency, angle and weight than in lower load groups. These results indicated that the fatigue of muscles varied in the same task, and the number-one risk factor of ECU, ED and FCR was angle load.

The in vitro antitumor effect and in vivo tumor-specificity distribution of human-mouse chimeric antibody against transferrin receptor.

Transferrin receptor (TfR/CD71) deserves attention as a selective target for cancer therapy due to its higher expression in tumors versus normal tissues. Also, it has been shown the mouse-derived monoclonal antibody against TfR can significantly inhibit the proliferation of tumor cells. Through constructing the chimeric antibody against TfR, the antigenicity of antibody can be weakened, and most importantly, the antitumor effect of antibody can be strengthened by the introduction of the human Fc fragment. In previous studies, we successfully constructed the human-mouse chimeric antibody against TfR (D2C) and demonstrated that its Fab fragment could specially recognize the TfR on the surface of target cells. In this study, through labeling the chimeric antibody D2C with 125I, we calculated the affinity constant (Ka) of 9.34-9.62x10(9) l/mol for this antibody according to the Scatchard drawing method. Moreover, in vivo studies in nude mice-bearing human liver cancer (SMMC-7721) xenografts have shown that the radioactivity distribution ratio of 131I-D2C on T/NT was 2-14:1 or 3-21:1 on the seventh day after intraperitoneal or intratumoral injection of 131I-labeled D2C (131I-D2C). These evidences indicated that the in vivo distribution of D2C display the characteristics of certain tumor-specificity localization. In vitro studies, D2C can induce the apoptosis of K562 through the mitochondria death pathway and arrest the cell at G1 phase, as determined by cell cycle analysis. Using the human tumor cells (K562, CEM, and SMMC-7721) expressing TfR as target cells, and normal human PBMC as effector cells, Fc fragment of D2C can perform both the antibody-dependent cell-mediated cytotoxicity and the complement-dependent cytotoxicity. Together, it was demonstrated that the D2C display a tumor-specificity distribution, and has a strong antitumor effect. Thus, it has the potential therapeutic significance.

THE METHODS FOR QUANTIFYING CAPACITY OF BACTERIA IN DISSOLVING P COMPOUNDS / 微生物学通报

Three bacteria of decomposing lecithin and 4 bacteria of dissolving aptite were incubated for 4 weeks with sand media respectively. Phosphorus in the sand was extracted with distilled water and measured by different methods. It was found that the bacteria have a quite different ability to release P from the materials. Part of the P released became organic phosphorus compounds in microbial tissue. However, a large amount of the P was reserved in microbial cells in a form of phosphates. The direct measurement of P in the extract by molybdenum blue method would underestimate the capacity of the bacteria to release P from the materials. The correct approach was that the sand was fumigated with chloroform and then digested with acid before the measurement by molybdenum blue method.

CAPACITY OF SOME BACTERIA AND FUNGI IN DISSOLVING PHOSPHATE ROCK / 微生物学通报

Four bacterial and 8 fungal isolates were incubated in media for 6 days. It was found that organic acid content in the media increased largely, but pH decreased sharply. Phosphorus content in the media enhanced dramatically as well. The fungal isolates showed stronger ability to dissolve phosphate rock than the bacterial ones. These isolates excreted not only quite distinct volume of organic acids but diverse organic acid chemicals. The fungi produced more kinds of organic acids than the bacteria. However, there was no significant relationship between the total quantity of organic acids and P content in the media.

THE METHODS FOR QUANTIFYING CAPACITY OF BACTERIA IN DISSOLVING P COMPOUNDS / 微生物学通报

Three bacteria of decomposing lecithin and 4 bacteria of dissolving aptite were incubated for 4 weeks with sand media respectively. Phosphorus in the sand was extracted with distilled water and measured by different methods. It was found that the bacteria have a quite different ability to release P from the materials. Part of the P released became organic phosphorus compounds in microbial tissue. However, a large amount of the P was reserved in microbial cells in a form of phosphates. The direct measurement of P in the extract by molybdenum blue method would underestimate the capacity of the bacteria to release P from the materials. The correct approach was that the sand was fumigated with chloroform and then digested with acid before the measurement by molybdenum blue method.