Health Monitoring via Heart, Breath, and Korotkoff Sounds by Wearable Piezoelectret Patches.

Real-time monitoring of vital sounds from cardiovascular and respiratory systems via wearable devices together with modern data analysis schemes have the potential to reveal a variety of health conditions. Here, a flexible piezoelectret sensing system is developed to examine audio physiological signals in an unobtrusive manner, including heart, Korotkoff, and breath sounds. A customized electromagnetic shielding structure is designed for precision and high-fidelity measurements and several unique physiological sound patterns related to clinical applications are collected and analyzed. At the left chest location for the heart sounds, the S1 and S2 segments related to cardiac systole and diastole conditions, respectively, are successfully extracted and analyzed with good consistency from those of a commercial medical device. At the upper arm location, recorded Korotkoff sounds are used to characterize the systolic and diastolic blood pressure without a doctor or prior calibration. An Omron blood pressure monitor is used to validate these results. The breath sound detections from the lung/ trachea region are achieved a signal-to-noise ration comparable to those of a medical recorder, BIOPAC, with pattern classification capabilities for the diagnosis of viable respiratory diseases. Finally, a 6×6 sensor array is used to record heart sounds at different locations of the chest area simultaneously, including the Aortic, Pulmonic, Erb's point, Tricuspid, and Mitral regions in the form of mixed data resulting from the physiological activities of four heart valves. These signals are then separated by the independent component analysis algorithm and individual heart sound components from specific heart valves can reveal their instantaneous behaviors for the accurate diagnosis of heart diseases. The combination of these demonstrations illustrate a new class of wearable healthcare detection system for potentially advanced diagnostic schemes.

Investigation of Acoustic Injection on the MPU6050 Accelerometer.

Acoustic injection is one of the most dangerous ways of causing micro-electro-mechanical systems (MEMS) failures. In this paper, the failure mechanism of acoustic injection on the microprocessor unit 6050 (MPU6050) accelerometer is investigated by both experiment and simulation. A testing system was built to analyze the performance of the MPU6050 accelerometer under acoustic injection. A MEMS disassembly method was adopted and a MATLAB program was developed to establish the geometric model of MPU6050. Subsequently, a finite element model of MPU6050 was established. Then, the acoustic impacts on the sensor layer of MPU6050 were studied by acoustic-solid coupling simulations. The effects of sound frequencies, pressures and directions were analyzed. Simulation results are well agreed with the experiments which indicate that MPU6050 is most likely to fail under the sounds of 11,566 Hz. The failure mechanism of MPU6050 under acoustic injection is the relative shift of the capacitor flats caused by acoustic-solid resonance that make the sensor detect false signal and output error data. The stress is focused on the center linkage. MPU6050 can be reliable when the sound pressure is lower than 100 dB.

Vapor-Phase Polymerized Poly(3,4-Ethylenedioxythiophene) on a Nickel Nanowire Array Film: Aqueous Symmetrical Pseudocapacitors with Superior Performance.

Three-dimensional (3D) nanometal scaffolds have gained considerable attention recently because of their promising application in high-performance supercapacitors compared with plain metal foils. Here, a highly oriented nickel (Ni) nanowire array (NNA) film was prepared via a simple magnetic-field-driven aqueous solution deposition process and then used as the electrode scaffold for the vapor-phase polymerization of 3,4-ethylenedioxythiophene (EDOT). Benefiting from the unique 3D open porous structure of the NNA that provided a highly conductive and oriented backbone for facile electron transfer and fast ion diffusion, the as-obtained poly(3,4-ethylenedioxythiophene) (PEDOT) exhibited an ultra-long cycle life (95.7% retention of specific capacitance after 20 000 charge/discharge cycles at 5 A/g) and superior capacitive performance. Furthermore, two electrodes were fabricated into an aqueous symmetric supercapacitor, which delivered a high energy density (30.38 Wh/kg at 529.49 W/kg) and superior long-term cycle ability (13.8% loss of capacity after 20 000 cycles). Based on these results, the vapor-phase polymerization of EDOT on metal nanowire array current collectors has great potential for use in supercapacitors with enhanced performance.