Room-temperature low-threshold avalanche effect in stepwise van-der-Waals homojunction photodiodes.

Avalanche or carrier-multiplication effect, based on impact ionization processes in semiconductors, has a great potential for enhancing the performance of photodetector and solar cells. However, in practical applications, it suffers from high threshold energy, reducing the advantages of carrier multiplication. Here, we report on a low-threshold avalanche effect in a stepwise WSe2 structure, in which the combination of weak electron-phonon scattering and high electric fields leads to a low-loss carrier acceleration and multiplication. Owing to this effect, the room-temperature threshold energy approaches the fundamental limit, Ethre ≈ Eg, where Eg is the bandgap of the semiconductor. Our findings offer an alternative perspective on the design and fabrication of future avalanche and hot-carrier photovoltaic devices.

Next-Generation Photodetectors beyond Van Der Waals Junctions.

With the continuous advancement of nanofabrication techniques, development of novel materials, and discovery of useful manipulation mechanisms in high-performance applications, especially photodetectors, the morphology of junction devices and the way junction devices are used are fundamentally revolutionized. Simultaneously, new types of photodetectors that do not rely on any junction, providing a high signal-to-noise ratio and multidimensional modulation, have also emerged. This review outlines a unique category of material systems supporting novel junction devices for high-performance detection, namely, the van der Waals materials, and systematically discusses new trends in the development of various types of devices beyond junctions. This field is far from mature and there are numerous methods to measure and evaluate photodetectors. Therefore, it is also aimed to provide a solution from the perspective of applications in this review. Finally, based on the insight into the unique properties of the material systems and the underlying microscopic mechanisms, emerging trends in junction devices are discussed, a new morphology of photodetectors is proposed, and some potential innovative directions in the subject area are suggested.

Configurable circular-polarization-dependent optoelectronic silent state for ultrahigh light ellipticity discrimination.

Filterless light-ellipticity-sensitive optoelectronic response generally has low discrimination, thus severely hindering the development of monolithic polarization detectors. Here, we achieve a breakthrough based on a configurable circular-polarization-dependent optoelectronic silent state created by the superposition of two photoresponses with enantiomerically opposite ellipticity dependences. The zero photocurrent and the significantly suppressed noise of the optoelectronic silent state singularly enhance the circular polarization extinction ratio (CPER) and the sensitivity to light ellipticity perturbation. The CPER of our device approaches infinity by the traditional definition. The newly established CPER taking noise into account is 3-4 orders of magnitude higher than those of ordinary integrated circular polarization detectors, and it remains high in an expanded wavelength range. The noise equivalent light ellipticity difference goes below 0.009° Hz-1/2 at modulation frequencies above 1000 Hz by a light power of 281 µW. This scheme brings a leap in developing monolithic ultracompact circular polarization detectors.

Gate-Tunable van der Waals Photodiodes with an Ultrahigh Peak-to-Valley Current Ratio.

Photodetectors and imagers based on 2D layered materials are currently subject to a rapidly expanding application space, with an increasing demand for cost-effective and lightweight devices. However, the underlying carrier transport across the 2D homo- or heterojunction channel driven by the external electric field, like a gate or drain bias, is still unclear. Here, a visible-near infrared photodetector based on van der Waals stacked molybdenum telluride (MoTe2 ) and black phosphorus (BP) is reported. The type-I and type-II band alignment can be tuned by the gate and drain voltage combined showing a dynamic modulation of the conduction polarity and negative differential transconductance. The heterojunction devices show a good photoresponse to light illumination ranging from 520-2000 nm. The built-in potential at the MoTe2 /BP interface can efficiently separate photoexcited electron-hole pairs with a high responsivity of 290 mA W-1 , an external quantum efficiency of 70%, and a fast photoresponse of 78 µs under zero bias.

How to characterize figures of merit of two-dimensional photodetectors.

Photodetectors based on two-dimensional (2D) materials have been the focus of intensive research and development over the past decade. However, a gap has long persisted between fundamental research and mature applications. One of the main reasons behind this gap has been the lack of a practical and unified approach for the characterization of their figures of merit, which should be compatible with the traditional performance evaluation system of photodetectors. This is essential to determine the degree of compatibility of laboratory prototypes with industrial technologies. Here we propose general guidelines for the characterization of the figures of merit of 2D photodetectors and analyze common situations when the specific detectivity, responsivity, dark current, and speed can be misestimated. Our guidelines should help improve the standardization and industrial compatibility of 2D photodetectors.

Substrate engineering for wafer-scale two-dimensional material growth: strategies, mechanisms, and perspectives.

The fabrication of wafer-scale two-dimensional (2D) materials is a prerequisite and important step for their industrial applications. Chemical vapor deposition (CVD) is the most promising approach to produce high-quality films in a scalable way. Recent breakthroughs in the epitaxy of wafer-scale single-crystalline graphene, hexagonal boron nitride, and transition-metal dichalcogenides highlight the pivotal roles of substrate engineering by lattice orientation, surface steps, and energy considerations. This review focuses on the existing strategies and underlying mechanisms, and discusses future directions in epitaxial substrate engineering to deliver wafer-scale 2D materials for integrated electronics and photonics.

SRH suppressed P-G-I design for very long-wavelength infrared HgCdTe photodiodes.

The very long wavelength infrared (VLWIR, >14 µm) spectral band is an indispensable part of new-generation infrared remote sensing. Mercury cadmium telluride (HgCdTe or MCT) has shown excellent potential across the entire infrared band. However, the dark current, which is extremely sensitive to the technological level and small Cd composition, severely limits the performance of VLWIR HgCdTe photodiodes. In this study, cut-off wavelengths of up to 15 µm for HgCdTe devices with novel P-G-I (including wide bandgap p-type cap layer, grading layer and intrinsic absorption layer) designs have been reported. Compared with a device with a double-layer heterojunction (DLHJ) structure, the designed P-G-I structure successfully reduced dark current by suppressing the Shockley-Read-Hall process. Considering the balance of quantum efficiency and dark current, with the introduction of an approximately 0.8 µm thickness Cd composition grading layer, the device can achieve a high detectivity of up to 2.5×1011 cm Hz1/2 W-1. Experiments show that the P-G-I-T device has a lower dark current and a better SRH process suppressing ability than DLHJ devices, the measured detectivity achieved 8.7×1010 cm Hz1/2 W-1. According to additional research, the trap-assisted tunneling current is the primary component of the dark current. Controlling the trap concentration to as low as 1×1013 cm-3 will be continuous and meaningful work. The proposed study provides guidance for VLWIR HgCdTe photodetectors.

Fully Depleted Self-Aligned Heterosandwiched Van Der Waals Photodetectors.

Room-temperature-operating highly sensitive mid-wavelength infrared (MWIR) photodetectors are utilized in a large number of important applications, including night vision, communications, and optical radar. Many previous studies have demonstrated uncooled MWIR photodetectors using 2D narrow-bandgap semiconductors. To date, most of these works have utilized atomically thin flakes, simple van der Waals (vdW) heterostructures, or atomically thin p-n junctions as absorbers, which have difficulty in meeting the requirements for state-of-the-art MWIR photodetectors with a blackbody response. Here, a fully depleted self-aligned MoS2 -BP-MoS2 vdW heterostructure sandwiched between two electrodes is reported. This new type of photodetector exhibits competitive performance, including a high blackbody peak photoresponsivity up to 0.77 A W-1 and low noise-equivalent power of 2.0 × 10-14  W Hz-1/2 , in the MWIR region. A peak specific detectivity of 8.61 × 1010  cm Hz1/2  W-1 under blackbody radiation is achieved at room temperature in the MWIR region. Importantly, the effective detection range of the device is twice that of state-of-the-art MWIR photodetectors. Furthermore, the device presents an ultrafast response of ≈4 µs both in the visible and short-wavelength infrared bands. These results provide an ideal platform for realizing broadband and highly sensitive room-temperature MWIR photodetectors.

Pristine PN junction toward atomic layer devices.

In semiconductor manufacturing, PN junction is formed by introducing dopants to activate neighboring electron and hole conductance. To avoid structural distortion and failure, it generally requires the foreign dopants localize in the designated micro-areas. This, however, is challenging due to an inevitable interdiffusion process. Here we report a brand-new junction architecture, called "layer PN junction", that might break through such limit and help redefine the semiconductor device architecture. Different from all existing semiconductors, we find that a variety of van der Waals materials are doping themselves from n- to p-type conductance with an increasing/decreasing layer-number. It means the capability of constructing homogeneous PN junctions in monolayers' dimension/precision, with record high rectification-ratio (>105) and low cut-off current (<1 pA). More importantly, it spawns intriguing functionalities, like gate-switchable-rectification and noise-signal decoupled avalanching. Findings disclosed here might open up a path to develop novel nanodevice applications, where the geometrical size becomes the only critical factor in tuning charge-carrier distribution and thus functionality.

Emerging Single-Photon Detectors Based on Low-Dimensional Materials.

Single-photon detectors (SPDs) that can sense individual photons are the most sensitive instruments for photodetection. Established SPDs such as conventional silicon or III-V compound semiconductor avalanche diodes and photomultiplier tubes have been used in a wide range of time-correlated photon-counting applications, including quantum information technologies, in vivo biomedical imaging, time-of-flight 3D scanners, and deep-space optical communications. However, further development of these fields requires more sophisticated detectors with high detection efficiency, fast response, and photon-number-resolving ability, etc. Thereby, significant efforts have been made to improve the performance of conventional SPDs and to develop new photon-counting technologies. In this review, the working mechanisms and key performance metrics of conventional SPDs are first summarized. Then emerging photon-counting detectors (in the visible to infrared range) based on 0D quantum dots, 1D quantum nanowires, and 2D layered materials are discussed. These low-dimensional materials exhibit many exotic properties due to the quantum confinement effect. And photodetectors built from these nD-materials (n = 0, 1, 2) can potentially be used for ultra-weak light detection. By reviewing the status and discussing the challenges faced by SPDs, this review aims to provide future perspectives on the research directions of emerging photon-counting technologies.

All-in-one two-dimensional retinomorphic hardware device for motion detection and recognition.

With the advent of the Internet of Things era, the detection and recognition of moving objects is becoming increasingly important1. The current motion detection and recognition (MDR) technology based on the complementary metal oxide semiconductor (CMOS) image sensors (CIS) platform contains redundant sensing, transmission conversion, processing and memory modules, rendering the existing systems bulky and inefficient in comparison to the human retina. Until now, non-memory capable vision sensors have only been used for static targets, rather than MDR. Here, we present a retina-inspired two-dimensional (2D) heterostructure based retinomorphic hardware device with all-in-one perception, memory and computing capabilities for the detection and recognition of moving trolleys. The proposed 2D retinomorphic device senses an optical stimulus to generate progressively tuneable positive/negative photoresponses and memorizes it, combined with interframe differencing computations, to achieve 100% separation detection of moving trichromatic trolleys without ghosting. The detected motion images are fed into a conductance mapped neural network to achieve fast trolley recognition in as few as four training epochs at 10% noise level, outperforming previous results from similar customized datasets. The prototype demonstration of a 2D retinomorphic device with integrated perceptual memory and computation provides the possibility of building compact, efficient MDR hardware.

Fast Uncooled Mid-Wavelength Infrared Photodetectors with Heterostructures of van der Waals on Epitaxial HgCdTe.

Uncooled infrared photodetectors have evoked widespread interest in basic research and military manufacturing because of their low-cost, compact detection systems. However, existing uncooled infrared photodetectors utilize the photothermoelectric effect of infrared radiation operating at 8-12 µm, with a slow response time in the millisecond range. Hence, the exploration of new uncooled mid-wavelength infrared (MWIR) heterostructures is conducive to the development of ultrafast and high-performance nano-optoelectronics. This study explores a van der Waals heterojunction on epitaxial HgCdTe (vdWs-on-MCT) as an uncooled MWIR photodetector, which achieves fast response as well as high detectivity for spectral blackbody detection. Specifically, the vdWs-on-MCT photodetector has a fast response time of 13 ns (77 MHz), which is approximately an order of magnitude faster than commercial uncooled MCT photovoltaic photodetectors. Importantly, the device exhibits a photoresponsivity of 2.5 A W-1 , quantum efficiency as high as 85%, peak detectivity of 2 × 1010  cm Hz1/2 W-1 under blackbody radiation at room temperature, and peak detectivity of up to 1011  cm Hz1/2 W-1 at 77 K. Thereby, this work facilitates the effective design of high-speed and high-performance heterojunction uncooled MWIR photodetectors.

Skin effect photon-trapping enhancement in infrared photodiodes.

With the development of infrared optoelectronic technology, high responsivity, ultra-low dark current, and high response speed have become important factors of the next generation of infrared photodiodes. However, the minimum thickness of the absorber layer is limited to approximately one or several wavelength lengths to acquire high quantum efficiency, which results in a long transit time of photogenerated carriers. In this work, we propose a photon-trapping structure that uses the skin effect of metals to generate horizontal local modes to enhance the absorption of infrared photodiodes. The photon-trapping structure consists of an artificial grating structure covered by a metallic film. Importantly, we develop a simplified theoretical model to describe the local mode, which is then being used to design the realistic photon-trapping structure presented in this work. This design method is universal and we discuss the optical properties of the photon-trapping structure in InAs, InSb, InAs/GaSb type-II superlattices, InAs/InAsSb type-II superlattices, and HgCdTe infrared photodiodes. Both absorption of optical properties and responsivity of optoelectrical properties are numerically investigated in a systematic way. The optical simulations indicate that the absorption of the HgCdTe infrared photodiodes exceeds 80% at 8.5 ∼ 11 µm with a maximum value of 95% at 9.73 µm. The optoelectrical simulations show that the responsivity at 7 ∼ 10 µm is significantly enhanced compared to that of the plain HgCdTe infrared photodiodes without the photon-trapping structure. We further investigate the optical crosstalk in the HgCdTe pixel array employing the photon-trapping structure. The optical crosstalk significantly reduces as the pixel spacing increases. Our work provides a design method for developing small pixel, large scale, and low dark current focal plane array infrared photodiodes.

Slowing Hot-Electron Relaxation in Mix-Phase Nanowires for Hot-Carrier Photovoltaics.

Hot carrier harvest could save 30% energy loss in solar cells. So far, however, it is still unreachable as the photoexcited hot carriers are short-lived, ∼1 ps, determined by a rapid relaxation process, thus invalidating any reprocessing efforts. Here, we propose and demonstrate a feasible route to reserve hot electrons for efficient collection. It is accomplished by an intentional mix of cubic zinc-blend and hexagonal wurtzite phases in III-V semiconductor nanowires. Additional energy levels are then generated above the conduction band minimum, capturing and storing hot electrons before they cool down to the band edges. We also show the superiority of core/shell nanowire (radial heterostructure) in extracting hot electrons. The strategy disclosed here may offer a unique opportunity to modulate hot carriers for efficient solar energy harvest.

Spatial description theory of narrow-band single-carrier avalanche photodetectors.

The avalanche is the foundation of the understanding and vast applications of the breakdown of semiconductors and insulators. Present numerical theories analyzing the avalanche photodetectors are mainly split into two categories: the macroscopic empirical model with fitting parameters and the microscopic process simulation with statistical estimations. Here, we present a parameter-free analytic theory of the avalanche for a narrow-band material, HgCdTe, originated from quantum mechanics, avoiding any fitting parameter or any statistical estimation while taking advantage of both categories. Distinct from classical theory, we propose a full spatial description of an avalanche with basic concepts such as transition rate and equation of motion modified. As a stochastic process, the probability density function (PDF) of impact ionization is utilized in a generalized history-dependent theory. On account of different carrier generation character of light and leakage current, we suggest that carrier generated at different positions should be considered separately, which is done by generalized history-dependent theory in our work. Further, in our calculation, the reason for the abnormal rise of excess noise factor (ENF) observed in the experiment in single-carrier avalanche photodetectors is clarified.

Blackbody-sensitive room-temperature infrared photodetectors based on low-dimensional tellurium grown by chemical vapor deposition.

Blackbody-sensitive room-temperature infrared detection is a notable development direction for future low-dimensional infrared photodetectors. However, because of the limitations of responsivity and spectral response range for low-dimensional narrow bandgap semiconductors, few low-dimensional infrared photodetectors exhibit blackbody sensitivity. Here, highly crystalline tellurium (Te) nanowires and two-dimensional nanosheets were synthesized by using chemical vapor deposition. The low-dimensional Te shows high hole mobility and broadband detection. The blackbody-sensitive infrared detection of Te devices was demonstrated. A high responsivity of 6650 A W-1 (at 1550-nm laser) and the blackbody responsivity of 5.19 A W-1 were achieved. High-resolution imaging based on Te photodetectors was successfully obtained. All the results suggest that the chemical vapor deposition-grown low-dimensional Te is one of the competitive candidates for sensitive focal-plane-array infrared photodetectors at room temperature.

Simultaneous control of intensity, phase, and polarization in real time under a weak oscillation theory.

Manipulating polarization, phase, and amplitude simultaneously in real time is an ultimate pursuit of controlling light. Several types of controllable metasurfaces have been realized, but with either low transmission efficiencies or limited control over amplitude, polarization, and phase in real time. Here we present a weak oscillation theory dealing with a new, to the best of our knowledge, type of optical system consisting of many layers of artificial oscillators, with each layer weakly interacting with the external field. As an application of our theory, we demonstrate and simulate a graphene-based metasurface structure to show that the oscillator system could change the focal length by changing the bias voltages. The polarization state to focus can also be selected by the bias voltage. The weak oscillation theory provides a flexible method to control the intensity, phase, and polarization.

Extrinsic Photoconduction Induced Short-Wavelength Infrared Photodetectors Based on Ge-Based Chalcogenides.

2D layered photodetectors have been widely researched for intriguing optoelectronic properties but their application fields are limited by the bandgap. Extending the detection waveband can significantly enrich functionalities and applications of photodetectors. For example, after breaking through bandgap limitation, extrinsic Si photodetectors are used for short-wavelength infrared or even long-wavelength infrared detection. Utilizing extrinsic photoconduction to extend the detection waveband of 2D layered photodetectors is attractive and desirable. However, extrinsic photoconduction has yet not been observed in 2D layered materials. Here, extrinsic photoconduction-induced short-wavelength infrared photodetectors based on Ge-based chalcogenides are reported for the first time and the effectiveness of intrinsic point defects are demonstrated. The detection waveband of room-temperature extrinsic GeSe photodetectors with the assistance of Ge vacancies is broadened to 1.6 µm. Extrinsic GeSe photodetectors have an excellent external quantum efficiency (0.5%) at the communication band of 1.31 µm and polarization-resolved capability to subwaveband radiation. Moreover, room-temperature extrinsic GeS photodetectors with a detection waveband to the communication band of 1.55 µm further verify the versatility of intrinsic point defects. This approach provides design strategies to enrich the functionalities of 2D layered photodetectors.

Ferroelectric Localized Field-Enhanced ZnO Nanosheet Ultraviolet Photodetector with High Sensitivity and Low Dark Current.

Zinc oxide (ZnO) nanosheets have demonstrated outstanding electrical and optical properties, which are well suited for ultraviolet (UV) photodetectors. However, they have a high density of intrinsically unfilled traps, and it is difficult to achieve p-type doping, leading to the poor performance for low light level switching ratio and a high dark current that limit practical applications in UV photodetection. Here, UV photodetectors based on ZnO nanosheets are demonstrated, whose performance is significantly improved by using a ferroelectric localized field. Specifically, the photodetectors have achieved a responsivity of up to 3.8 × 105 A W-1 , a detectivity of 4.4 × 1015 Jones, and a photocurrent gain up to 1.24 × 106 . These device figures of merit are far beyond those of traditional ZnO ultraviolet photodetectors. In addition, the devices' initial dark current can be easily restored after continuous photocurrent measurement by using a positive gate voltage pulse. This study establishes a new approach to produce high-sensitivity and low-dark-current ultraviolet photodetectors and presents a crucial step for further practical applications.