Optimization Effect of Metakaolin on Macro- and Micro-Mechanical Properties of Composite Cementitious Materials under Different Curing Conditions.

To provide the theoretical basis for the engineering application of metakaolin as aluminum-rich pozzolanic ash materials, the promoting effect of metakaolin on the macro- and micro-mechanical properties of composite cement-based composite materials was explored under high-temperature steam and standard curing conditions. Analysis techniques, which involved thermogravimetric and nanoindentation coupled with scanning electron microscopy-energy dispersive X-ray spectroscopy, were used. To analyze the experimental data, the ACI empirical formula and the copula function were used. The correlation among the hydration degree of the MK-cement cementation system, the Al/Si of the C-(A)-S-H phase, and the nanomechanical properties of the C-(A)-S-H gel phase was investigated. According to prior research, the macroscopic mechanical properties and the substitution rate of the MK-cement composite cementitious system can be improved under high-temperature curing conditions in a short period, in which the optimum substitution rate of metakaolin is 20%. The ACI empirical formula was used to demonstrate the functional relationship between the metakaolin replacement rate, curing time, and compressive strength. The MK-cement cementation system can eliminate the defect phase, reduce the CH phase content, and then increase the C-(A)-S-H gel phase content and bulk density. The micro-mechanical properties of the C-(A)-S-H gel phase rises due to its phase content and Al/Si ratio. Furthermore, the copula function verifies the dependence of the nanomechanical properties of C-(A)-S-H gel and Al/Si.

Mechanical Property Evaluation and Prediction of Cementing Composites Blended with MK and UFA under High-Temperature Steam Curing.

In this paper, the influence of the substitution rate of metakaolin (MK) and ultrafine fly ash (UFA) on the hydration degree, the micromechanical properties, the pore size distribution, and the corresponding fractal dimension of composite cement-based material was investigated under high-temperature steam curing. Furthermore, Thermogravimetric, Nanoindentation, and low-field nuclear magnetic resonance tests were used to explore the influencing factors of pore size distribution and its corresponding multi-fractal dimension. Finally, the correlations among the pore size distribution, related fractal dimensions, and compression strength were analyzed. Results indicate that the MK-UFA cement ternary cementation system (TCS) can improve the compressive strength and fluidity of samples and enhance the hydration degree and micromechanical properties of the cementitious system. TCS effectively refines the pore size and increases microporosity. In addition, micropore and its fractal dimension have a stronger correlation with the compressive strength of composite cement-based materials. Furthermore, the micro-fractal dimensions can better reflect the essential characteristics of the composite cementitious system. The higher the degree of hydration of the cementitious system and the nanomechanical properties of the C-(A)-S-H gel, the lower the micro-fractal dimension. Finally, the GM (1,3) prediction model of compressive strength, micro-fractal dimension, and microporosity are established based on the grey relational theory.

Predict the Phase Angle Master Curve and Study the Viscoelastic Properties of Warm Mix Crumb Rubber-Modified Asphalt Mixture.

To identify the most accurate approach for constructing of the dynamic modulus master curves for warm mix crumb rubber modified asphalt mixtures and assess the feasibility of predicting the phase angle master curves from the dynamic modulus ones. The SM (Sigmoidal model) and GSM (generalized sigmoidal model) were utilized to construct the dynamic modulus master curve, respectively. Subsequently, the master curve of phase angle could be predicted from the master curve of dynamic modulus in term of the K-K (Kramers-Kronig) relations. The results show that both SM and GSM can predict the dynamic modulus very well, except that the GSM shows a slightly higher correlation coefficient than SM. Therefore, it is recommended to construct the dynamic modulus master curve using GSM and obtain the corresponding phase angle master curve in term of the K-K relations. The Black space diagram and Wicket diagram were utilized to verify the predictions were consistent with the LVE (linear viscoelastic) theory. Then the master curve of storage modulus and loss modulus were also obtained. Finally, the creep compliance and relaxation modulus can be used to represent the creep and relaxation properties of warm-mix crumb rubber-modified asphalt mixtures.

The Discrete and Continuous Retardation and Relaxation Spectrum Method for Viscoelastic Characterization of Warm Mix Crumb Rubber-Modified Asphalt Mixtures.

To study the linear viscoelastic (LVE) of crumb rubber-modified asphalt mixtures before and after the warm mix additive was added methods of obtaining the discrete and continuous spectrum are presented. Besides, the relaxation modulus and creep compliance are constructed from the discrete and continuous spectrum, respectively. The discrete spectrum of asphalt mixtures can be obtained from dynamic modulus test results according to the generalized Maxwell model (GMM) and the generalized Kelvin model (GKM). Similarly, the continuous spectrum of asphalt mixtures can be obtained from the dynamic modulus test data via the inverse integral transformation. In this paper, the test procedure for all specimens was ensured to be completed in the LVE range. The results show that the discrete spectrum and the continuous spectrum have similar shapes, but the magnitude and position of the spectrum peaks is different. The continuous spectrum can be considered as the limiting case of the discrete spectrum. The relaxation modulus and creep compliance constructed by the discrete and continuous spectrum are almost indistinguishable in the reduced time range of 10-5 s-103 s. However, there are more significant errors outside the time range, and the maximum error is up to 55%.

Silencing tumor necrosis factor-alpha in vitro from small interfering RNA-decorated titanium nanotube array can facilitate osteogenic differentiation of mesenchymal stem cells.

Titanium implants are known for their bone bonding ability. However, the osseointegration may be severely disturbed in the inflammation environment. In order to enhance osseointegration of the implant in an inflamed environment, the small interfering RNA (siRNA) targeting tumor necrosis factor alpha (TNF-α) was used to functionalize titanium surface for gene silencing. The chitosan-tripolyphosphate-hyaluronate complexes were used to formulate nanoparticles (NPs) with siRNA, which were adsorbed directly by the anodized titanium surface. The surface characterization was analyzed by scanning electron microscope, atomic force microscopy, as well as contact angle measurement. The fluorescence microscope was used to monitor the degradation of the layer. The coculture system was established with mesenchymal stem cells (MSCs) grown directly on functionalized titanium surface and RAW264.7 cells (preactivated by lipopolysaccharide) grown upside in a transwell chamber. The transfection and knockdown efficiency of TNF-α in RAW264.7 cells were determined by fluorescence microscope, quantitative polymerase chain reaction, and enzyme-linked immunosorbent assay. The cytoskeleton and osteogenic differentiation of MSCs were also analyzed. Regular vertical aligned nanotubes (~100 nm diameter and ~300 nm length) were generated after anodization of polished titanium. After loading with NPs, the nanotubes were filled and covered by a layer of amorphous particles. The surface topography changed and wettability decreased after covering with NPs. As expected, a burst degradation of the film was observed, which could provide sufficient NPs in the released supernatant and result in transfection and knockdown effects in RAW264.7 cells. The cytoskeleton arrangement of MSCs was elongated and the osteogenic differentiation was also significantly improved on NPs loading surface. In conclusion, the siRNA decorated titanium implant could simultaneously suppress inflammation and improve osteogenesis, which may be suitable for peri-implant bone formation under inflammatory conditions.

MicroRNA-26a-modified adipose-derived stem cells incorporated with a porous hydroxyapatite scaffold improve the repair of bone defects.

Tissue-engineered bone substitutes are frequently used to repair bone defects. Adipose-derived stem cells (ASCs) are a promising source of cells for repairing bone tissue, however, insufficient osteogenic potency remains the main obstacle for their application. The present study aimed to enhance the osteogenic potency of ASCs by transfection of microRNA (miR)­26a, a novel osteogenic and angiogenic promoting miRNA. An inverted fluorescence microscope was used to observe transfection efficiency, while a scanning electron microscope was used to detect morphological alterations. Cell proliferation was monitored continuously for 7 days using a Cell Counting kit­8 assay. Osteogenic differentiation was determined by reverse transcription quantitative polymerase chain reaction, alkaline phosphatase (ALP) staining, collagen secretion and extracellular matrix (ECM) mineralization. ASCs were incorporated with a porous hydroxyapatite (HA) scaffold to create a novel tissue­engineered bone substitute and inserted into the critical tibia defect of rats. New bone formation was evaluated by hematoxylin and eosin and Masson's trichrome staining. The results demonstrated that miR­26a was successfully delivered into the cytoplasm, while the morphology and proliferation of ASCs were not significantly altered. Osteogenic­associated genes were markedly upregulated and ALP production, collagen secretion and ECM mineralization were all increased following transfection of miR­26a. Histological evaluation demonstrated that the modified cells accompanied with a porous HA scaffold markedly promoted new bone formation within the defective area. In conclusion, miR­26a transfection significantly improved the osteogenic potency of ASCs suggesting that modified ASCs incorporated with a HA scaffold may be used as a potential bone substitute.

Strain field mapping of dislocations in a Ge/Si heterostructure.

Ge/Si heterostructure with fully strain-relaxed Ge film was grown on a Si (001) substrate by using a two-step process by ultra-high vacuum chemical vapor deposition. The dislocations in the Ge/Si heterostructure were experimentally investigated by high-resolution transmission electron microscopy (HRTEM). The dislocations at the Ge/Si interface were identified to be 90° full-edge dislocations, which are the most efficient way for obtaining a fully relaxed Ge film. The only defect found in the Ge epitaxial film was a 60° dislocation. The nanoscale strain field of the dislocations was mapped by geometric phase analysis technique from the HRTEM image. The strain field around the edge component of the 60° dislocation core was compared with those of the Peierls-Nabarro and Foreman dislocation models. Comparison results show that the Foreman model with a = 1.5 can describe appropriately the strain field around the edge component of a 60° dislocation core in a relaxed Ge film on a Si substrate.

Full-Field Strain Mapping at a Ge/Si Heterostructure Interface.

The misfit dislocations and strain fields at a Ge/Si heterostructure interface were investigated experimentally using a combination of high-resolution transmission electron microscopy and quantitative electron micrograph analysis methods. The type of misfit dislocation at the interface was determined to be 60° dislocation and 90° full-edge dislocation. The full-field strains at the Ge/Si heterostructure interface were mapped by using the geometric phase analysis (GPA) and peak pairs analysis (PPA), respectively. The effect of the mask size on the GPA and PPA results was analyzed in detail. For comparison, the theoretical strain fields of the misfit dislocations were also calculated by the Peierls-Nabarro and Foreman dislocation models. The results showed that the optimal mask sizes in GPA and PPA were approximately three tenths and one-tenth of the reciprocal lattice vector, respectively. The Foreman dislocation model with an alterable factor a = 4 can best describe the strain field of the misfit dislocation at the Ge/Si heterostructure interface.