ABSTRACT
OBJECTIVE@#To investigate the prevalence and subtype distribution of Blastocystis sp. in pigs in Anhui Province.@*METHODS@#A total of 500 stool samples were collected from large-scale pig farms in Bozhou, Anqing, Chuzhou, Hefei, Fuyang, and Lu'an cities in Anhui Province from October to December 2015. Blastocystis was detected in pig stool samples using a PCR assay based on the small subunit ribosomal RNA (SSU rRNA) gene, and positive samples were subjected to sequencing and sequence analysis. Blastocystis subtypes were characterized in the online PubMLST database, and verified using phylogenetic tree created with the neighbor-joining algorithm in the Meta software.@*RESULTS@#The prevalence of Blastocystis infection was 43.2% (216/500) in pigs in 6 cities of Anhui Province, and all pig farms were tested positive for Blastocystis. There was a region-specific prevalence rate of Blastocystis (17.2% to 50.0%) (χ2 = 26.084, P < 0.01), and there was a significant difference in the prevalence of Blastocystis sp. among nursery pigs (39.6%), preweaned pigs (19.1%), and growing pigs (62.3%) (χ2 = 74.951, P < 0.01). Both online inquiry and phylogenetic analysis revealed ST1, ST3, and ST5 subtypes in pigs, with ST5 as the predominant subtype.@*CONCLUSIONS@#The prevalence of Blastocystis sp. is high in pigs in Anhui Province, with three zoonotic subtypes identified, including ST1, ST3, and ST5.
Subject(s)
Animals , Swine , Blastocystis/genetics , Phylogeny , Blastocystis Infections/veterinary , Polymerase Chain Reaction , Prevalence , Feces , Genetic VariationABSTRACT
Objective To investigate the prevalence and molecular features of Cryptosporidium in captive-bred Mustela putorius furo in Jiangsu Province.. Methods A total of 290 fresh stool samples were collected from a ferret farm in Jiangsu Province on May 2017, and the small subunit rRNA (SSU rRNA) gene of Cryptosporidium was amplified in stool samples using nested PCR assay. The actin, cowp and gp60 genes were amplified in positive samples and sequenced to characterize Cryptosporidium species/genotypes. Results A total of 18 stool samples were tested positive for Cryptosporidium SSU rRNA gene, with a detection rate of 6.2%. Sequence and phylogenetic analyses of SSU rRNA, actin and cowp genes characterized Cryptosporidium isolated from captive-bred ferrets as Cryptosporidium sp. ferret genotype. In addition, gp60 gene was amplified in 10 out of 18 stool samples tested positive for Cryptosporidium. Conclusions Cryptosporidium is widely prevalent in captive-bred ferrets in Jiangsu Province, and Cryptosporidium sp. ferret genotype is the only Cryptosporidium genotype in ferrets.
ABSTRACT
Natural products are essential sources of antitumor drugs. One such molecule, β-elemene, is a potent antitumor compound extracted from Curcuma wenyujin. In the present investigation, a series of novel 13,14-disubstituted nitric oxide (NO)-donor β-elemene derivatives were designed, with β-elemene as the foundational compound, and subsequently synthesized to evaluate their therapeutic potential against leukemia. Notably, the derivative labeled as compound 13d demonstrated a potent anti-proliferative activity against the K562 cell line, with a high NO release. In vivo studies indicated that compound 13d could effectively inhibit tumor growth, exhibiting no discernible toxic manifestations. Specifically, a significant tumor growth inhibition rate of 62.9% was observed in the K562 xenograft tumor mouse model. The accumulated data propound the potential therapeutic application of compound 13d in the management of leukemia.
Subject(s)
Humans , Mice , Animals , Cell Line, Tumor , Nitric Oxide Donors/pharmacology , Sesquiterpenes/pharmacology , Leukemia/drug therapy , Biological Assay , Cell ProliferationABSTRACT
The bacterial ATP-competitive GyrB/ParE subunits of type II topoisomerase are important anti-bacterial targets to treat super drug-resistant bacterial infections. Herein we discovered novel pyrrolamide-type GyrB/ParE inhibitors based on the structural modifications of the candidate AZD5099 that was withdrawn from the clinical trials due to safety liabilities such as mitochondrial toxicity. The hydroxyisopropyl pyridazine compound 28 had a significant inhibitory effect on Gyrase (GyrB, IC50 = 49 nmol/L) and a modest inhibitory effect on Topo IV (ParE, IC50 = 1.513 μmol/L) of Staphylococcus aureus. It also had significant antibacterial activities on susceptible and resistant Gram-positive bacteria with a minimum inhibitory concentration (MIC) of less than 0.03 μg/mL, which showed a time-dependent bactericidal effect and low frequencies of spontaneous resistance against S. aureus. Compound 28 had better protective effects than the positive control drugs such as DS-2969 ( 5) and AZD5099 ( 6) in mouse models of sepsis induced by methicillin-resistant Staphylococcus aureus (MRSA) infection. It also showed better bactericidal activities than clinically used vancomycin in the mouse thigh MRSA infection models. Moreover, compound 28 has much lower mitochondrial toxicity than AZD5099 ( 6) as well as excellent therapeutic indexes and pharmacokinetic properties. At present, compound 28 has been evaluated as a pre-clinical drug candidate for the treatment of drug-resistant Gram-positive bacterial infection. On the other hand, compound 28 also has good inhibitory activities against stubborn Gram-negative bacteria such as Escherichia coli (MIC = 1 μg/mL), which is comparable with the most potent pyrrolamide-type GyrB/ParE inhibitors reported recently. In addition, the structure-activity relationships of the compounds were also studied.
ABSTRACT
OBJECTIVE: This research estimated shear bond durability of zirconia and different substrates cemented by two self-adhesive resin cements (Clearfil SA Luting and RelyX U100) before and after aging conditioning. METHODS: Machined zirconia ceramic discs were cemented with four kinds of core material (cobalt-chromium alloy, flowable composite resin core material, packable composite resin, and dentin) with two self-adhesive resin cements (Clearfil SA Luting and RelyX U100). All specimens were divided into eight test groups, and each test group was divided into two subgroups. Each subgroup was subjected to shear test before and after 10 000 thermal cycles. RESULTS: All factors (core materials, cements, and thermal cycle) significantly influenced bond durability of zirconia ceramic (P<0.00 1). After 10 000 thermal cycles, significant decrease was not observed in shear bond strength of cobalt-chromium alloy luted with Clearfil SA Luting (P>0.05); observed shear bond strength was significantly higher than those of other substrates (P<0.05). Significantly higher shear bond strength was noted in Clearfil SA Luting luted with cobalt-chromium alloy, flowable composite resin core material, and packable composite resin than that of RelyX U100 (P<0.05). However, significant difference was not observed in shear bond strength of dentin luted with Clearfil SA Luting and RelyX U100 (P>0.05). CONCLUSIONS: Different core materials and self-adhesive resin cements can significantly affect bond durability of zirconia ceramic. â©.
Subject(s)
Dental Bonding , Adhesives , Ceramics , Chromium Alloys , Composite Resins , Dental Cementum , Dentin , Humans , Materials Testing , Resin Cements , ZirconiumABSTRACT
<p><b>OBJECTIVE</b>This research estimated shear bond durability of zirconia and different substrates cemented by two self-adhesive resin cements (Clearfil SA Luting and RelyX U100) before and after aging conditioning.</p><p><b>METHODS</b>Machined zirconia ceramic discs were cemented with four kinds of core material (cobalt-chromium alloy, flowable composite resin core material, packable composite resin, and dentin) with two self-adhesive resin cements (Clearfil SA Luting and RelyX U100). All specimens were divided into eight test groups, and each test group was divided into two subgroups. Each subgroup was subjected to shear test before and after 10 000 thermal cycles.</p><p><b>RESULTS</b>All factors (core materials, cements, and thermal cycle) significantly influenced bond durability of zirconia ceramic (P<0.00 1). After 10 000 thermal cycles, significant decrease was not observed in shear bond strength of cobalt-chromium alloy luted with Clearfil SA Luting (P>0.05); observed shear bond strength was significantly higher than those of other substrates (P<0.05). Significantly higher shear bond strength was noted in Clearfil SA Luting luted with cobalt-chromium alloy, flowable composite resin core material, and packable composite resin than that of RelyX U100 (P<0.05). However, significant difference was not observed in shear bond strength of dentin luted with Clearfil SA Luting and RelyX U100 (P>0.05).</p><p><b>CONCLUSIONS</b>Different core materials and self-adhesive resin cements can significantly affect bond durability of zirconia ceramic. .</p>