A novel pyrazolone complex P-FAH-Cu-bpy induces death of Escherichia coli and Staphylococcus aureus by disrupting cell structure and blocking energy.

A novel pyrazolone-based copper complex [Cu(L)(bpy)]∙CH3OH (P-FAH-Cu-bpy) was synthesized and previously characterized to have antitumor properties. This study aimed to investigate its antibacterial properties and action modes against Escherichia coli and Staphylococcus aureus. By agar diffusion assay, P-FAH-Cu-bpy showed strong antibacterial activity against E. coli and S. aureus with the diameter of inhibition zone of 10.17-12.50 mm and 11.83-14 mm, respectively. The minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of the complex were 1.5 and 3 µM, respectively. Destroyed bacteria cells and debris were clearly observed by SEM. At 2 MIC and 4 MIC of P-FAH-Cu-bpy, 1.1683 and 1.9083 pg copper per cell was taken by E. coli, and 4.5670 and 8.5250 pg per cell by S. aureus, respectively. Multi-step resistance selection showed both bacteria were sensitive to P-FAH-Cu-bpy without induction of resistance within 30 generations. With P-FAH-Cu-bpy treatment, the release of nucleotides and proteins and alkaline phosphatase was increased, but the activity of K+-Na+-ATPase and Ca2+-Mg2+-ATPase and membrane conductivity were decreased in both pathogens. In conclusion, P-FAH-Cu-bpy induced death of both bacteria by destroying the cell membrane structure and blocking energy and exhibited strong antibacterial activity against E. coli and S. aureus without inducing microbial resistance.

Facile preparation of conductive carbon-based membranes on dielectric substrates.

Graphene has attracted much research attention due to its outstanding chemical and physical properties, such as its excellent electronic conductivity, making it as a useful carbon material for a variety of application fields of photoelectric functional devices. Herein, a new method for synthesizing conductive carbon membranes on dielectric substrates via a low-temperature thermodynamic driven process is developed. Although the obtained films exhibit low crystallinity, their electrical, wetting, and optical properties are acceptable in practice, which opens up a new avenue for the growth of carbon membranes and may facilitate the applications of transparent electrodes as potential plasma-free surface-enhanced Raman scattering (SERS) substrates.

A three-dimensional "turn-on" sensor array for simultaneous discrimination of multiple heavy metal ions based on bovine serum albumin hybridized fluorescent gold nanoclusters.

Traditional single sensor is designed based on the "lock-and-key" mode, which only relies on the most dominant interactions between the sensing element and the target. Although it exhibits high selectivity, there are challenges in detecting multiple analytes at the same time. Here, a sensor array with three sensing elements is developed to detect multiple heavy metal ions simultaneously and quickly. In our experiment, bovine serum albumin-encapsulated gold nanoclusters (BSA-AuNCs) were used as fluorescence probes and three different dopamine (DA) concentrations as nonspecific receptors. As we know, self-polymerized polydopamine (PDA) can quench part of the fluorescence of BSA-AuNCs. Upon the addition of the heavy metal ions, the diverse non-specific interactions between DA and heavy metal ions result in the difference in the number of the remaining PDA. Therefore it would lead to different degrees of fluorescence recovery behavior. This unique "turn-on" fluorescence response mode can be analyzed by linear discriminant analysis (LDA) and hierarchical cluster analysis (HCA). Two-dimensional, three-dimensional and even four-dimensional mixed ions detection and quantitative detection have also been achieved. Moreover, by using this fluorescence array mode, heavy metal ions in tap water or blood samples can be detected.

Electrochemical Construction of Edge-Contacted Metal-Semiconductor Junctions with Low Contact Barrier.

2D semiconductors, such as MoS2 have emerged as promising ultrathin channel materials for the further scaling of field-effect transistors (FETs). However, the contact barrier at the metal-2D semiconductor junctions still significantly limits the device's performance. By extending the application of electrochemical deposition in 2D electronics, a distinct approach is developed for constructing metal-2D semiconductor junctions in an edge-contacted configuration through the edge-guided electrodeposition of varied metals. Both high-resolution microscopic imaging and electrical transport measurements confirm the successful creation of high-quality Pd-2D MoS2 junctions in desired geometry by combining electrodeposition with lithographic patterning. FETs are fabricated on the obtained Pd-2D MoS2 junctions and it is confirmed that these junctions exhibit a reduced contact barrier of ≈20 meV and extremely low contact resistance of 290 Ω µm and thus increase the averaged mobility of MoS2 FETs to ≈108 cm2 V -1 s-1 . This approach paves a new way for the construction of metal-semiconductor junctions and also demonstrates the great potential of the electrochemical deposition technique in 2D electronics.

Defect-Rich Monolayer MoS2 as a Universally Enhanced Substrate for Surface-Enhanced Raman Scattering.

Monolayer 2H-MoS2 has been widely noticed as a typical transition metal dichalcogenides (TMDC) for surface-enhanced Raman scattering (SERS). However, monolayer MoS2 is limited to a narrow range of applications due to poor detection sensitivity caused by the combination of a lower density of states (DOS) near the Fermi energy level as well as a rich fluorescence background. Here, surfaced S and Mo atomic defects are fabricated on a monolayer MoS2 with a perfect lattice. Defects exhibit metallic properties. The presence of defects enhances the interaction between MoS2 and the detection molecule, and it increases the probability of photoinduced charge transfer (PICT), resulting in a significant improvement of Raman enhancement. Defect-containing monolayer MoS2 enables the fluorescence signal of many dyes to be effectively burst, making the SERS spectrum clearer and making the limits of detection (LODs) below 10-8 M. In conclusion, metallic defect-containing monolayer MoS2 becomes a promising and versatile substrate capable of detecting a wide range of dye molecules due to its abundant DOS and effective PICT resonance. In addition, the synergistic effect of surface defects and of the MoS2 main body presents a new perspective for plasma-free SERS based on the chemical mechanism (CM), which provides promising theoretical support for other TMDC studies.

Environment-friendly degradable zinc-ion battery based on guar gum-cellulose aerogel electrolyte.

With the vigorous development of electronics and the increasingly prominent problem of environmental pollution, it is particularly important to exploit environmentally friendly electronic devices. Transient electronics represent a kind of device that once the specified functions have completed can completely or partially disappear through physical or chemical actions. In this work, we introduce a novel guar gum-cellulose aerogel (GCA) membrane based on natural biomaterials and successfully use it as an electrolyte film to fabricate a degradable zinc-ion battery (DZIB). All components of the prepared DZIBs can be successfully degraded or disintegrate in phosphate-buffered saline (PBS) containing a solution of proteinase K after approximately 40 days. This electrolyte film has a high ionic conductivity of approximately 4.73 × 10-2 S cm-1 and a good mechanical stress property. When applied to DZIB, the production of zinc dendrites can be restrained, leading to the battery showing excellent electrochemical performance. The battery exhibits a specific capacity of 309.1 mA h g-1 at a current density of 308 mA g-1 after 100 cycles and a steady cycling ability (100% capacity retention after 200 cycles). More importantly, the electrochemical performance of DZIB is better than that of transient batteries reported in the past, taking a solid step in the field of transient electronics in the initial stage.

Surface Charge Transfer Doping of MoS2 Monolayer by Molecules with Aggregation-Induced Emission Effect.

Surface charge transfer doping has attracted much attention in modulating the optical and electrical behavior of 2D transition metal dichalcogenides (TMDCs), where finding controllable and efficient dopants is crucial. Here, 1,1,2,2-tetraphenylethylene (TPE) derivative molecules with aggregation-induced emission (AIE) effect were selected as adjustable dopants. By designing nitro and methoxyl functional groups and surface coating, controlled p/n-type doping can be achieved on a chemical vapor deposition (CVD) grown monolayer, MoS2. We investigated the electron transfer behavior between these two dopants and MoS2 with fluorescence, Raman, X-ray photoelectron spectra and transient absorption spectra. 1,1,2,2-Tetrakis(4-nitrophenyl)ethane (TPE-4NO2) with a negative charge aggregation can be a donor to transfer electrons to MoS2, while 1,1,2,2-Tetrakis(4-methoxyphenyl)ethane (TPE-4OCH3) is the opposite and electron-accepting. Density functional theory calculations further explain and confirm these experimental results. This work shows a new way to select suitable dopants for TMDCs, which is beneficial for a wide range of applications in optoelectronic devices.

A Novel 3D Hierarchical Plasmonic Functional Cu@Co3O4@Ag Array as Intelligent SERS Sensing Platform with Trace Droplet Rapid Detection Ability for Pesticide Residue Detection on Fruits and Vegetables.

Rapid and effective detection of pesticide residues from complex surfaces of fruits and vegetables has important significance. Herein, we report a novel three-dimensional (3D) hierarchical porous functional surface-enhanced Raman scattering (SERS) substrate, which is fabricated by successive two-step hydrothermal synthesis strategy of silver nanoparticles (Ag NPs) and cobalt oxide nanowires (Co3O4 NWs) on the 3D copper foam framework as Cu@Co3O4@Ag-H. The strategy offers a new avenue for localized plasmonic materials distribution and construction, which exhibits better morphology regulation ability and SERS activity (or hotspots engineering) than physical spurring obtained Cu@Co3O4@Ag-S. The developed Cu@Co3O4@Ag-H possesses large surface area and rich hotspots, which contributes to the excellent SERS performance, including homogeneity (RSD of 7.8%), sensitivity (enhancement factor, EF of 2.24 × 108) and stability. The Cu@Co3O4@Ag-H not only provides plenty of Electromagnetic enhancement (EM) hotspots but also the trace detection capability for droplet rapid sensing within 2 s. Cu@Co3O4@Ag-H substrate is further developed as an effective SERS sensing platform for pesticide residues detection on the surfaces of fruits and vegetables with excellent LOD of 0.1 ppm, which is lower than the most similar reported works. This work offers new potential for bioassay, disease POCT diagnosis, national security, wearable flexible devices, energy storage and other related fields.

ZIF-8/PI Nanofibrous Membranes With High-Temperature Resistance for Highly Efficient PM0.3 Air Filtration and Oil-Water Separation.

Air and water pollution poses a serious threat to public health and the ecological environment worldwide. Particulate matter (PM) is the major air pollutant, and its primary sources are processes that require high temperatures, such as fossil fuel combustion and vehicle exhaust. PM0.3 can penetrate and seriously harm the bronchi of the lungs, but it is difficult to remove PM0.3 due to its small size. Therefore, PM0.3 air filters that are highly efficient and resistant to high temperatures must be developed. Polyimide (PI) is an excellent polymer with a high temperature resistance and a good mechanical property. Air filters made from PI nanofibers have a high PM removal efficiency and a low air flow resistance. Herein, zeolitic imidazolate framework-8 (ZIF-8) was used to modify PI nanofibers to fabricate air filters with a high specific surface area and filtration efficiency. Compared with traditional PI membranes, the ZIF-8/PI multifunction nanofiber membranes achieved super-high filtration efficiency for ultrafine particles (PM0.3, 100%), and the pressure drop was only 63 Pa. The filtration mechanism of performance improvement caused by the introduction of ZIF-8/PI nanofiber membrane is explored. Moreover, the ZIF-8/PI nanofiber membranes exhibited excellent thermal stability (300 C) and efficient water-oil separation ability (99.85%).

Self-Supported Defect-Rich Au-Based Nanostructures as Robust Bifunctional Catalysts for the Methanol Oxidation Reaction and Oxygen Reduction Reaction in an Alkaline Medium.

Recently, alkaline direct methanol fuel cells have made great progress with the development of alkaline electrocatalysis, and a wide variety of catalysts have been explored for methanol oxidation reaction (MOR)and oxygen reduction reaction (ORR). However, the slow kinetics of the MOR and ORR remain a great challenge. In this paper, self-supported defect-rich AuCu was obtained by a convenient one-pot strategy. Self-supported AuCu presented a branched, porous nanostructure. The nanobranch consisted of several 13 nm skeletons, which connected in the kink of the structure. Different growth directions co-existed at the kink, and the twin boundaries and dislocations as defects were observed. When the Au-based nanostructure functioned as an electrocatalyst, it showed robust MOR and ORR performance. For the MOR, the forward peak current was 2.68 times greater than that of Au/C; for the ORR, the activity was close to that of Pt/C and significantly better than that of Au/C. In addition, it possessed superior electrochemical stability for MOR and ORR. Finally, an in-depth exploration of the impact of surface defects and electrochemical Cu removal on MOR and ORR activity was carried out to explain the MOR and ORR's catalytic performance.

Electrospinning Superassembled Mesoporous AIEgen-Organosilica Frameworks Featuring Diversified Forms and Superstability for Wearable and Washable Solid-State Fluorescence Smart Sensors.

Flexible optical sensors are widely studied and applied in many fields. However, developing highly stable and washable wearable sensors in optics is still facing significant challenges. Here, we demonstrate an AIEgen-organosilica framework (TPEPMO) hybrid nanostructure-based flexible optical sensor, which is prepared by a two-step co-condensation and electrospinning superassembly process. Organosilica precursors with aggregation-induced emission (AIE) features are covalently linked into periodic mesoporous organosilica (PMO) frameworks with high fluorescent efficiency due to the restriction of intramolecular motion. The three-dimensional space of ordered porous materials provides abundant reaction sites, allowing rapid and sensitive monitoring of analytes. TPEPMOs exhibit good properties as acidic pH fluorescent sensors with a pKa of 4.3. A flexible film is obtained by dispersing TPEPMO nanospheres in a poly(lactic-co-glycolic acid) (PLGA) and polyacrylonitrile (PAN) hybrid fibrous matrix (TPEPMO-CFs) using the electrospinning superassembly technique and is successfully served as an efficient fluorescent probe for the naked eye detection of ammonia gas and HCl vapor by emission changes. The fluorescence of TPEPMO-CFs can be reversed in the presence of volatile acidic/alkaline gas for more than five cycles, exhibiting excellent recyclability. In addition, TPEPMO-CF sensors show excellent washability and long-term photostability (fluorescence was maintained above 94% after washing 10 times). These stimuli-responsive AIEgen-organosilica frameworks featuring diversified forms and superstability for wearable and washable solid-state fluorescence exhibit great potential for smart gas sensors, wearable devices, and solid-state lighting applications.

Suppression of the Charge Density Wave State in Two-Dimensional 1T-TiSe2 by Atmospheric Oxidation.

Two-dimensional (2D) metallic transition-metal dichalcogenides (TMDCs), such as 1T-TiSe2 , have recently emerged as unique platforms for exploring their exciting properties of superconductivity and the charge density wave (CDW). 2D 1T-TiSe2 undergoes rapid oxidation under ambient conditions, significantly affecting its CDW phase-transition behavior. We comprehensively investigate the oxidation process of 2D TiSe2 by tracking the evolution of the chemical composition and atomic structure with various microscopic and spectroscopic techniques and reveal its unique selenium-assisting oxidation mechanism. Our findings facilitate a better understanding of the chemistry of ultrathin TMDCs crystals, introduce an effective method to passivate their surfaces with capping layers, and thus open a way to further explore the functionality of these materials toward devices.

High-Mobility Multilayered MoS2 Flakes with Low Contact Resistance Grown by Chemical Vapor Deposition.

The controlled synthesis of high-quality multilayer (ML) MoS2 flakes with gradually shrinking basal planes by chemical vapor deposition (CVD) is demonstrated. These CVD-grown ML MoS2 flakes exhibit much higher mobility and current density than mechanically exfoliated ML flakes due to the reduced contact resistance which mainly resulted from direct contact between the lower MoS2 layers and electrodes.

Two-Dimensional Semiconductors Grown by Chemical Vapor Transport.

Developing controlled approaches for synthesizing high-quality two-dimensional (2D) semiconductors is essential for their practical applications in novel electronics. The application of chemical vapor transport (CVT), an old single-crystal growth technique, has been extended from growing 3D crystals to synthesizing 2D atomic layers by tuning the growth kinetics. Both single crystalline individual flakes and continuous films of 1 L MoS2 were successfully obtained with CVT approach at low growth temperatures of 300-600 °C. The obtained 1 L MoS2 exhibits high crystallinity and comparable mobility to mechanically exfoliated samples, as confirmed by both atomic resolution microscopic imaging and electrical transport measurements. Besides MoS2 , this method was also used in the growth of 2D WS2 , MoSe2 , Mox W1-x S2 alloys, and ReS2 , thus opening up a new way for the controlled synthesis of various 2D semiconductors.

Controlled Synthesis of Two-Dimensional 1T-TiSe2 with Charge Density Wave Transition by Chemical Vapor Transport.

Two-dimensional (2D) metallic transition metal dichalcogenides (TMDCs), such as 1T-TiSe2, are ideal systems for exploring the fundamentals in condensed matter physics. However, controlled synthesis of these ultrathin materials has not been achieved. Here, we explored the synthesis of charge density wave (CDW)-bearing 2D TiSe2 with chemical vapor transport (CVT) by extending this bulk crystal growth approach to the surface growth of TiSe2 by introducing suitable growth substrates and dramatically slowing down the growth rate. Sub-10 nm TiSe2 flakes were successfully obtained, showing comparable quality to the mechanically exfoliated thin flakes. A CDW state with 2 × 2 superstructure was clearly observed on these ultrathin flakes by scanning tunneling microscopy (STM), and the phase transition temperature of these flakes was investigated by transport measurements, confirming the existence of CDW states. Our work opens up a new approach to synthesizing 2D CDW and superconductive TMDCs for exploring new fundamentals and applications in novel electronics.

Universal Transfer and Stacking of Chemical Vapor Deposition Grown Two-Dimensional Atomic Layers with Water-Soluble Polymer Mediator.

Chemical vapor deposition (CVD) has shown great potential in synthesizing various high-quality two-dimensional (2D) transition metal dichalcogenides (TMDCs). However, the nondestruction transfer of these CVD-grown 2D TMDCs at a high yield remains a key challenge for applying these emerging materials in various aspects. To address this challenge, we designed a water-soluble transfer mediator consisting of two polymers, polyvinylpyrrolidone (PVP) and poly(vinyl alcohol) (PVA), which can form strong interactions with CVD-grown 2D TMDCs for the nondestruction transfer of these materials. With this mediator, we realized the physical transfer of CVD-grown MoS2 flakes and several other 2D TMDCs, including 2D alloys and heterostructures to a wide range of substrates at a high yield of >90% with well-retained properties as evidenced by various microscopic, spectroscopic, and electrical measurements. Field-effect transistors (FETs) made on thus-transferred CVD-grown MoS2 monolayers exhibited obviously higher mobility than those transferred by chemical method. We also constructed several artificial 2D crystals showing very strong interlayer coupling by the multiple transfer of CVD-grown 2D TMDCs monolayers with this approach. This transfer approach will make versatile CVD-grown 2D materials and their artificial stacks with pristine qualities easily accessible for both fundamental studies and practical applications.

Atomic MoS2 monolayers synthesized from a metal-organic complex by chemical vapor deposition.

The controllable synthesis of MoS2 monolayers is the key challenge for their practical applications. Here we report the chemical vapor deposition (CVD) growth of single layered MoS2 by utilizing a bifunctional precursor. This precursor is a metal-organic complex which supplies both Mo sources and organic seeding promoters for the efficient CVD growth of MoS2 monolayers. The successful growth of high quality MoS2 flakes indicates that the rational design of bifunctional precursors will open up a new way for the controllable CVD growth of two-dimensional (2D) transition metal dichalcogenides (TMDCs).

Two-Dimensional Layered Heterostructures Synthesized from Core-Shell Nanowires.

Controlled stacking of different two-dimensional (2D) atomic layers will greatly expand the family of 2D materials and broaden their applications. A novel approach for synthesizing MoS2 /WS2 heterostructures by chemical vapor deposition has been developed. The successful synthesis of pristine MoS2 /WS2 heterostructures is attributed to using core-shell WO3-x /MoO3-x nanowires as a precursor, which naturally ensures the sequential growth of MoS2 and WS2 . The obtained heterostructures exhibited high crystallinity, strong interlayer interaction, and high mobility, suggesting their promising applications in nanoelectronics. The stacking orientations of the two layers were also explored from both experimental and theoretical aspects. It is elucidated that the rational design of precursors can accurately control the growth of high-quality 2D heterostructures. Moreover, this simple approach opens up a new way for creating various novel 2D heterostructures by using a large variety of heteronanomaterials as precursors.