ABSTRACT
The CO2 adsorption and dynamic behaviors on single crystal anatase TiO2(101) surfaces were investigated by UHV-FTIRS and first-principles calculations. The IRRAS results at 90 K show that the ν3(OCO) asymmetric stretching vibration of adsorbed CO2 exhibits band splitting at rather low CO2 coverage in p-polarized IR spectra for the IR beam incident along the [101[combining macron]] direction. Co-adsorbed CO can prevent such band splitting. Ab initio molecular dynamics (AIMD) simulations revealed that the adsorbed CO2 at finite temperature does not keep a stationary adsorption state but keeps a certain swing motion: one end of the linear CO2 molecule binds to surface Ti5c sites and the other end swings within the (010) plane with a tilted angle distribution ranging from 10° to 60° relative to the [101[combining macron]] direction. By suggesting a statistical model, we confirmed that it is the swing motion that results in the band splitting phenomenon of CO2 vibration in IR spectra. The co-adsorbed CO decreases the swing angle distribution ranging from 10° to 45° through the intermolecular interaction between CO and CO2, leading to the disappearance of CO2 band splitting.
ABSTRACT
The polaron introduced by the oxygen vacancy (Vo) dominates many surface adsorption processes and chemical reactions on reduced oxide surfaces. Based on IR spectra and DFT calculations of NO and CO adsorption, we gave two scenarios of polaron-involved molecular adsorption on reduced TiO2(110) surfaces. For NO adsorption, the subsurface polaron electron transfers to a Ti:3d-NO:2p hybrid orbital mainly on NO, leading to the large redshifts of vibration frequencies of NO. For CO adsorption, the polaron only transfers to a Ti:3d state of the surface Ti5c cation underneath CO, and thus only a weak shift of vibration frequency of CO was observed. These scenarios are determined by the energy-level matching between the polaron state and the LUMO of adsorbed molecules, which plays a crucial role in polaron-adsorbate interaction and related catalytic reactions on reduced oxide surfaces.
ABSTRACT
Clarifying the fundamental adsorption and diffusion process of CO2 on single crystal ZnO surfaces is critical in understanding CO2 activation and transformation over ZnO-based catalysts. By using ultrahigh vacuum-Fourier transform infrared spectroscopy (UHV-FTIRS), we observed the fine structures of CO2 vibrational bands on ZnO(100) surfaces, which are the combinations of different vibrational frequencies, originated from CO2 monomer, dimer, trimer and longer polymer chains along [0001] direction according to the density functional theory calculations. Such novel chain adsorption mode results from the relatively large attractive interaction between CO2 and Zn3c atoms in [0001] direction. Further experiments indicate that the short chains at low coverage evolve into long chains through Ostwald ripening by annealing. At higher CO2 coverage (0.7 ML), the as-grown local (2 × 1) phase of chains first evolve into an unstable local (1 × 1) phase below 150 K, and then into a stable well-defined (2 × 1) phase above 150 K.
ABSTRACT
The charge state of Au clusters deposited on rutile TiO2(110) single crystal surfaces was studied by UHV-FTIRS using CO as a probe. The as-deposited Au clusters on oxidized TiO2(110) surfaces are electrically neutral and are identified by the 2105-2112 cm(-1) vibrational frequency of adsorbed CO depending on Au coverage. Annealing Au/TiO2(110) in a moderate O2 atmosphere at 400 K blue shifts the CO vibrational frequency by only 2-3 cm(-1) both on bare TiO2(110) surfaces and on Au clusters. However, NO exposure blue shifts the CO vibrational frequency by 16-26 cm(-1) for CO adsorbed on Au atoms near the interface and by 3-4 cm(-1) for CO adsorbed on top of Au clusters. As the acceptors of the intense charge transfer from Au, the Oa atoms generated through (NO)2â N2O + Oa reactions on the small fraction of the bare TiO2(110) surface reside around the Au/TiO2(110) interface perimeter, causing the neutral Au(0) to be cationic Au(δ+) states. This is a new approach to manipulate the charge state of Au clusters on oxide surfaces, which may be helpful in regulating the catalytic redox reactions on oxide supported metal systems.
ABSTRACT
CO2 adsorption and interaction on rutile TiO2(110) surfaces was studied by UHV-FTIRS combined with theoretical simulations. With increasing CO2 exposure, CO2 adsorbs in succession at the oxygen vacancy (Vo) sites, on the five-coordinated Ti cation (Ti5c) sites and the bridging oxygen (Obr) sites at low temperature. The coupling has occurred between neighboring CO2 adsorbed on Ti5c sites from rather low CO2 coverage (â¼0.5 ML), leading the ν3(OCO) asymmetric stretching vibrations to split into two absorption bands in IR spectra. Two kinds of coupled geometries of adjacent CO2 on Ti5c sites are determined by theoretical simulations. For the higher CO2 coverage (â¼1.5 ML), the horizontal adsorption configuration along the [11[combining macron]0] azimuth of CO2 adsorbed on Obr sites is identified for the first time using polarization- and azimuth-resolved RAIRS in experiments. The significant deviation of CO2 from the top of Obr sites demonstrates the strong coupling between CO2 adsorbed on Obr and Ti5c sites.
ABSTRACT
Competitive adsorption of prototype molecules such as (12)CO, (13)CO and CO2 at the two typical fivefold coordinated Ti5c(4+) cation sites of reduced rutile TiO2(110) surfaces was studied in a newly designed UHV-FTIR system. The measured binding energies of (12)CO, (13)CO or CO2 adsorbed at two kinds of Ti5c(4+) sites are different. The molecular occupying probability at these sites depends on the binding energy of the adsorbed molecules; while, the molecular exchanging probability at these sites depends on their binding energy difference due to the presence of competitive adsorption. A simple thermodynamic equilibrium model was proposed to qualitatively interpret the adsorption and competitive adsorption mechanisms. These results will contribute to the elucidation of the (photo)catalytic process on TiO2(110) surfaces.
ABSTRACT
The adsorption and reaction of NO on both the oxidized and reduced single crystal rutile TiO2(110) surfaces were studied in a UHV-FTIRS system at low temperature. The monodentate adsorption configuration of the cis-(NO)2 dimer at bridge oxygen vacancy (Vo) sites was detected for the first time on reduced TiO2(110) surfaces. With the aid of (NO)2 dimer adsorption anisotropy, the bidentate configuration of the cis-(NO)2 dimer on fivefold coordinated Ti5c(4+) cation sites was clearly confirmed. The (NO)2 dimer converts to N2O on Ti5c(4+) cation sites at higher NO dosage on both oxidized and reduced surfaces, rather than at Vo sites. The (NO)2 â N2O conversion is independent of the presence of Vo on TiO2(110) surfaces. To explain the signs of absorption bands of the dimer monodentate configuration, the local optical constant at Vo sites was introduced.
ABSTRACT
Palladium nanoparticles have been deposited electrochemically onto self-assembled monolayers (SAMs) of 4-(4-(4-pyridyl)phenyl)phenylmethanethiol. A pronounced correlation between the kinetics of the complexation between pyridine nitrogens and Pd cations and the sample potential has been observed. The amount of the Pd deposit significantly increases by adjusting the sample potential during the complexation step to values below the point of zero charge. The size of the spherical shaped Pd nanoparticles varies within a certain limit according to the amount of Pd(2+) ions initially coordinated on top of the SAM. The metallic state of these particles was confirmed by X-ray photoelectron spectroscopy and infrared reflection-absorption spectroscopy. Moreover, CO adsorption on the clean Pd deposit revealed further information about the crystallographic orientation of the nanoparticles.
ABSTRACT
A systematic study on the photocatalytic activity of well-defined, macroscopic bulk single-crystal TiO(2) anatase and rutile samples has been carried out, which allows us to link photoreactions at surfaces of well-defined oxide semiconductors to an important bulk property with regard to photochemistry, the life time of e-h pairs generated in the bulk of the oxides by photon absorption. The anatase (101) surface shows a substantially higher activity, by an order of magnitude, for CO photo-oxidation to CO(2) than the rutile (110) surface. This surprisingly large difference in activity tracks the bulk e-h pair lifetime difference for the two TiO(2) modifications as determined by contactless transient photoconductance measurements on the corresponding bulk materials.
ABSTRACT
Initial stages of a chiral phase transition in the monolayer of a quinacridone derivative on the Au(111) surface were investigated by scanning tunneling microscopy at submolecular resolution. The prochiral molecules form a homochiral lamella phase at low coverages upon adsorption. A transition to a racemate lattice is observed with increasing coverage. Enantiomers of a homochiral lamella line become specifically substituted by opposite enantiomers such that a heterochiral structure evolves. Due to the higher density, lateral alkyl chains are bent away from the surface. Our findings are significant for the understanding and control of chiral phase transitions in related molecular systems like liquid crystals.
ABSTRACT
The adsorption of NO on single crystalline rutile TiO(2)(110) surfaces at 100 K and the subsequent formation of N(2)O via NO dimer intermediates was studied by reflection-absorption infrared spectroscopy using a UHV-FTIR system. Analysis of the IR data reveals that the occurrence of s-polarized adsorbate vibrational bands always increases the reflectivity, giving negative bands, whereas p-polarized bands are either positive or negative, depending on the reduction state of the substrate. This sign reversal of optical bands is caused by vacancy doping, which also affects the optical constants governing the complex interplay between reflection and transmission of p-polarized light on a dielectric substrate.
