Wide Temperature All-Solid-State Ti3 C2 Tx Quantum Dots/L-Ti3 C2 Tx Fiber Supercapacitor with High Capacitance and Excellent Flexibility.

Ti3 C2 Tx Quantum dots (QDs)/L-Ti3 C2 Tx fiber electrode (Q3 M7 ) with high capacitance and excellent flexibility is prepared by a wet spinning method. The assembled units Ti3 C2 Tx nanosheets (NSs) with large size (denoted as L-Ti3 C2 Tx ) is obtained by natural sedimentation screen raw Ti3 AlC2 , etching, and mechanical delamination. The pillar agent Ti3 C2 Tx QDs is fabricated by an ultrasound method. Q3 M7 fiber electrode gave a specific capacitance of 1560 F cm-3 , with a capacity retention rate of 79% at 20 A cm-3 , and excellent mechanical strength of 130 Mpa. A wide temperature all-solid-state the delaminated montmorillonite (F-MMT)/Polyvinyl alcohol (PVA) dimethyl sulfoxide (DMSO) flexible hydrogel (DHGE) (F-MMT/PVA DHGE) Q3 M7 fiber supercapacitor is assembled by using Q3 M7 fiber as electrodes and F-MMT/PVA DHGE as electrolyte and separator. It showed a volume specific capacitance of 413 F cm-3 at 0.5 A cm-3 , a capacity retention of 97% after 10 000 cycles, an energy density of 36.7 mWh cm-3 at a power density of 311 mW cm-3 , and impressive capacitance and flexibility over a wide temperature range of -40 to 60 °C. This work provides an effective strategy for designing and assembling wide temperature all-solid-state fiber supercapacitors with optimal balance of capacitive performance and flexibility.

Boron Quantum Dots Pillared Ti3 C2 Tx Membrane Electrode with High Rate Performance for Supercapacitor.

A sonication-assisted liquid-phase preparation technique is developed to prepare boron quantum dots (BQDs) with a lateral size of 3 nm in a solution of NMP and NBA; it shows a direct bandgap semiconductor with a bandgap of 3 eV and a specific capacitance of 41 F g-1 . A BQDs(10)-Ti3 C2 Tx membrane electrode with excellent capacitance and high flexibility is prepared by using Ti3 C2 Tx nanosheets (NSs) as assembled units and BQDs as pillar; it gives a specific capacitance of 524 F g-1 at 1 A g-1 in 6 m H2 SO4 electrolyte, a high capacity retention of 75%, and a minimum relaxation time of 0.51 s. An all-solid-state BQDs(10)-Ti3 C2 Tx flexibility supercapacitor is assembled by using a BQDs(10)-Ti3 C2 Tx membrane as electrodes and PVA/H2 SO4 hydrogel as electrolyte; it not only shows an area specific capacitance of 552 mF cm-2 at 1.25 mA cm-2 , a retention rate of 75%, a capacity retention of 93% after 5000 cycles, and an energy density of 40.4 Wh cm-3 at a volume power density of 416 W cm-3 , but also provides superior flexibility and can be bent to different degrees, showing that the assembled BQDs(10)-Ti3 C2 Tx membrane electrode and BQDs(10)-Ti3 C2 Tx flexible supercapacitor display broad application prospects in field of portable/wearable electronic devices.

Dual-Modified Electrospun Fiber Membrane as Separator with Excellent Safety Performance and High Operating Temperature for Lithium-Ion Batteries.

Polyacrylonitrile/Boric acid/Melamine/the delaminated BN nanosheets electrospun fiber membrane (PB3N1BN) with excellent mechanical property, high thermal stability, superior flame-retardant performance, and good wettability are fabricated by electrospinning PAN/DMF/H3BO3/C3H6N6/ the delaminated BN nanosheets (BNNSs) homogeneous viscous suspension and followed by a heating treatment. BNNSs are obtained by delaminating the bulk h-BN in isopropyl alcohol (IPA) with an assistance of Polyvinylpyrrolidone (PVP). Benefiting from the cross-linked pore structure and high-temperature stability of BNNSs, PB3N1BN electrospun fiber membrane delivers high thermal dimensional stability (almost no size contraction at 200 °C), excellent mechanical property (19.1 MPa), good electrolyte wettability (contact angle about 0°), and excellent flame retardancy (minimum total heat release of 3.2 MJ m-2). Moreover, the assembled LiFePO4/PB3N1BN/Li asymmetrical battery using LiFePO4 as the cathode and Li as the anode has a high capacity (169 mAh g-1 at 0.5 C), exceptional rate capability (129 mAh g-1 at 5 C), the prominent cycling stability without obvious decay after 400 cycles, and a good discharge capacity of 152 mAh g-1 at a high temperature of 80 °C. This work offers a new structural design strategy toward separators with excellent mechanical performance, good wettability, and high thermal stability for lithium-ion batteries.

Satellite Navigation Spoofing Interference Detection and Direction Finding Based on Array Antenna.

Satellite navigation signals are feeble when they reach the ground, so they are vulnerable to attacks from outside interference signals. By emitting spoofing interference signals similar to real satellite signals, spoofing interference can make receivers give wrong navigation, position, and time information, and it is challenging to detect. This seriously affects the safe use of GNSS; therefore, it is essential to identify spoofing interference signals quickly and accurately. In our study, we proposed a novel six-array spoofing-interference-monitoring array antenna, which achieved the detection and identification of spoofing interference sources by monitoring the relevant peaks and combining an airspace-trapping algorithm. Moreover, we quickly accomplished our search for the whole circumferential ambiguity by using long- and short-baseline algorithms, which can realize the high-precision detection of spoofing interference sources. To verify this method's accuracy, we conducted outdoor real experiments using a special spoofing interference source, and our experimental results show that our proposed array antenna's directional accuracy for spoofing interference signals is kept within 2°, showing high spoofing interference direction-finding capability.