The Semiconductor/Conductor Interface Piezoresistive Effect in an Organic Transistor for Highly Sensitive Pressure Sensors.

The piezoresistive pressure sensor, a kind of widely investigated artificial device to transfer force stimuli to electrical signals, generally consists of one or more kinds of conducting materials. Here, a highly sensitive pressure sensor based on the semiconductor/conductor interface piezoresistive effect is successfully demonstrated by using organic transistor geometry. Because of the efficient combination of the piezoresistive effect and field-effect modulation in a single sensor, this pressure sensor shows excellent performance, such as high sensitivity (514 kPa-1 ), low limit of detection, short response and recovery time, and robust stability. More importantly, the unique gate modulation effect in the transistor endows the sensor with an unparalleled ability-tunable sensitivity via bias conditions in a single sensor, which is of great significance for applications in complex pressure environments. The novel working principle and high performance represent significant progress in the field of pressure sensors.

Ultrahigh-Sensitivity Piezoresistive Pressure Sensors for Detection of Tiny Pressure.

High-sensitivity pressure sensors are crucial for the ultrasensitive touch technology and E-skin, especially at the tiny-pressure range below 100 Pa. However, it is highly challenging to substantially promote sensitivity beyond the current level at several to 200 kPa-1 and to improve the detection limit lower than 0.1 Pa, which is significant for the development of pressure sensors toward ultrasensitive and highly precise detection. Here, we develop an efficient strategy to greatly improve the sensitivity near to 2000 kPa-1 using short-channel coplanar device structure and sharp microstructure, which is systematically proposed for the first time and rationalized by the mathematic calculation and analysis. Significantly, benefiting from the ultrahigh sensitivity, the detection limit is improved to be as small as 0.075 Pa. The sensitivity and detection limit are both superior to the current levels and far surpass the function of human skin. Furthermore, the sensor shows fast response time (50 µs), excellent reproducibility and stability, and low power consumption. Remarkably, the sensor shows excellent detection capacity in the tiny-pressure range, including light-emitting diode switching with a pressure of 7 Pa, ringtone (2-20 Pa) recognition, and ultrasensitive (0.1 Pa) electronic glove. This work represents a performance and strategic progress in the field of pressure sensing.

Low Hysteresis Carbon Nanotube Transistors Constructed via a General Dry-Laminating Encapsulation Method on Diverse Surfaces.

Electrical hysteresis in carbon nanotube thin-film transistor (CNTTFT) due to surface adsorption of H2O/O2 is a severe obstacle for practical applications. The conventional encapsulation methods based on vacuum-deposited inorganic materials or wet-coated organic materials have some limitations. In this work, we develop a general and highly efficient dry-laminating encapsulation method to reduce the hysteresis of CNTTFTs, which may simultaneously realize the construction and encapsulation of CNTTFT. Furthermore, by virtue of dry procedure and wide compatibility of PMMA, this method is suitable for the construction of CNTTFT on diverse surface including both inorganic and organic dielectric materials. Significantly, the dry-encapsulated CNTTFT exhibits very low or even negligible hysteresis with good repeatability and air stability, which is greatly superior to the nonencapsulated and wet-encapsulated CNTTFT with spin-coated PMMA. The dry-laminating encapsulation strategy, a kind of technological innovation, resolves a significant problem of CNTTFT and therefore will be promising in facile transferring and packaging the CNT films for high-performance optoelectronic devices.

Facile Peeling Method as a Post-Remedy Strategy for Producing an Ultrasmooth Self-Assembled Monolayer for High-Performance Organic Transistors.

The modification of dielectric surface with a self-assembled monolayer (SAM) such as octadecyltrichlorosilane (OTS) is a widely used method to tune the electrical property of diverse electronic devices based on organic semiconductors, graphene, transition metal dichalcogenides (TMDs), and so forth. The surface roughness of self-assembled OTS monolayer is a key factor in determining its effect on device performance, but the preparation of an ultrasmooth OTS monolayer is a technologically challenging task. In this work, an ultrasmooth OTS monolayer is prepared via a facile peeling method, which may serve as a postremedy strategy to remove the protuberant aggregates. Such a method has not been reported before. With organic semiconductors as a testing model, ultrasmooth OTS may significantly improve the charge mobility of organic field-effect transistors (OFETs). P-type dinaphtho[2,3-b:2',3'-f]thieno[3,2-b]thiophene (DNTT) OFET with an ultrasmooth OTS monolayer yields good reproducibility and unprecendented maximum mobility of 8.16 cm(2) V(-1) s(-1), which is remarkably superior to that of the OFET with a pristine OTS monolayer. This work develops a simple method to resolve the common and significant problem of the quality of OTS modification, which would be highly promising for electronic applications as well as other fields such as surface and interface engineering.

Controlled Growth of Ultrathin Film of Organic Semiconductors by Balancing the Competitive Processes in Dip-Coating for Organic Transistors.

Ultrathin film with thickness below 15 nm of organic semiconductors provides excellent platform for some fundamental research and practical applications in the field of organic electronics. However, it is quite challenging to develop a general principle for the growth of uniform and continuous ultrathin film over large area. Dip-coating is a useful technique to prepare diverse structures of organic semiconductors, but the assembly of organic semiconductors in dip-coating is quite complicated, and there are no reports about the core rules for the growth of ultrathin film via dip-coating until now. In this work, we develop a general strategy for the growth of ultrathin film of organic semiconductor via dip-coating, which provides a relatively facile model to analyze the growth behavior. The balance between the three direct factors (nucleation rate, assembly rate, and recession rate) is the key to determine the growth of ultrathin film. Under the direction of this rule, ultrathin films of four organic semiconductors are obtained. The field-effect transistors constructed on the ultrathin film show good field-effect property. This work provides a general principle and systematic guideline to prepare ultrathin film of organic semiconductors via dip-coating, which would be highly meaningful for organic electronics as well as for the assembly of other materials via solution processes.

Minimizing electrode edge in organic transistors with ultrathin reduced graphene oxide for improving charge injection efficiency.

Electrode materials and geometry play a crucial role in the charge injection efficiency in organic transistors. Reduced graphene oxide (RGO) electrodes show good compatibility with an organic semiconductor from the standpoint of energy levels and ordered growth of the organic semiconductor, both of which are favourable for charge injection. However, the wide electrode edge (>10 nm) in commonly-used RGO electrodes is generally detrimental to charge injection. In this study, ultrathin (about 3 nm) RGO electrodes are fabricated via a covalency-based assembly strategy, which has advantages such as robustness against solvents, high conductivity, transparency, and easy scaling-up. More remarkably, the ultrathin electrode fabricated in this study has a narrow edge, which may facilitate the diffusion and assembly of organic semiconductors and thus form a uniform semiconductor film across the electrode/channel junction area. As a result, the minimized electrode edge may significantly improve the charge injection in organic transistors compared with thick electrodes.

[Advances of Researches on Anti-phage Mechanisms of Host].

Phages also known as bacteria viruses, are recognized as the most abundant and diverse microbes. This diversity is adapting to the selective pressures such as the prevalence of the phage resistance mechanisms of bacteria. Phages invade and lyse bacterial through six steps (adsorption, injection, replication, transcription translation, assemble, release). Bacteria evolve to many anti-phage mechanisms to avoid phage infection and lysis. This paper focus on a variety of anti-phage mechanisms of bacteria.

Complete Genome Sequence of the Salmonella enterica Serovar Paratyphi A Bacteriophage LSPA1 Isolated in China.

The bacteriophage LSPA1 was isolated from hospital sewage (Kunming, China), and lytic activity was demonstrated against the Salmonella enterica serovar Paratyphi A CMCC50973 strain. This bacteriophage has a 41,880-bp double-stranded DNA (dsDNA) genome encoding 58 coding sequences (CDSs) and belongs to the family Siphoviridae.