Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 6 de 6
Filter
Add more filters










Database
Language
Publication year range
1.
Angew Chem Int Ed Engl ; : e202407870, 2024 May 15.
Article in English | MEDLINE | ID: mdl-38748475

ABSTRACT

Converting spent lithium-ion batteries (LIBs) cathode materials into environmental catalysts has drawn more and more attention. Herein, we fabricated a Co3O4-based catalyst from spent LiCoO2 LIBs (Co3O4-LIBs) and found that the role of Al and Cu from current collectors on its performance is nonnegligible. The density functional theory calculations confirmed that the doping of Al and/or Cu upshifts the d-band center of Co. A Fenton-like reaction based on peroxymonosulfate (PMS) activation was adopted to evaluate its activity. Interestingly, Al doping strengthened chemisorption for PMS (from -2.615 eV to -2.623 eV) and shortened Co-O bond length (from 2.540 Što 2.344 Å) between them, whereas Cu doping reduced interfacial charge-transfer resistance (from 28.347 kΩ to 6.689 kΩ) excepting for the enhancement of the above characteristics. As expected, the degradation activity toward bisphenol A of Co3O4-LIBs (0.523 min-1) was superior to that of Co3O4 prepared from commercial CoC2O4 (0.287 min-1). Simultaneously, the reasons for improved activity were further verified by comparing activity with catalysts doped Al and/or Cu into Co3O4. This work reveals the role of elements from current collectors on the performance of functional materials from spent LIBs, which is beneficial to the sustainable utilization of spent LIBs.

2.
J Hazard Mater ; 470: 134215, 2024 May 15.
Article in English | MEDLINE | ID: mdl-38626678

ABSTRACT

Selective and efficient removal of thiosulfates (S2O32-) to recover high-purity and value-added thiocyanate products by fractional crystallization process is a promising route for the resource treatment of coke oven gas desulfurization wastewater. Herein, catalytic wet air oxidation (CWAO), with manganese-based oxide synthesized from spent ternary lithium-ion batteries (MnOx-LIBs), was proposed to selectively remove S2O32- from desulfurization wastewater. 98.0 % of S2O32- is selectively removed by the MnOx-LIBs CWAO system, which was 4.1 times that of the MnOx CWAO system. The synergistic effect among multiple metals from spent LIBs induces the enlarged specific surface area, increased reactive sites and formation of oxygen vacancy, promoting the adsorption and activation of O2, thereby realizing high-efficiency removal of S2O32-. The satisfactory selective removal efficiency can be maintained in the proposed system under complex environmental conditions. Notably, the proposed system is cost-effective and applicable to actual wastewater, in which 81.2 % of S2O32- is selectively removed from coke oven gas desulfurization wastewater. More importantly, compared with the typical processes, the proposed process is simpler and more environmentally-friendly. This work provides an alternative route to selectively remove S2O32- from coke oven gas desulfurization wastewater, expecting to drive the development of resource utilization of coke oven gas desulfurization wastewater.

3.
Environ Sci Technol ; 57(36): 13579-13587, 2023 09 12.
Article in English | MEDLINE | ID: mdl-37653710

ABSTRACT

The traditional hydrolysis-cooling-adsorption process for coke oven gas (COG) desulfurization urgently needs to be improved because of its complex nature and high energy consumption. One promising alternative for replacing the last two steps is selective catalytic oxidation. However, most catalysts used in selective catalytic oxidation require a high temperature to achieve effective desulfurization. Herein, a robust 30Fe-MCM41 catalyst is developed for direct desulfurization at medium temperatures after hydrolysis. This catalyst exhibits excellent stability for over 300 h and a high breakthrough sulfur capacity (2327.6 mgS gcat-1). Introducing Ag into the 30Fe-MCM41 (30Fe5Ag-MCM41) catalyst further enhances the H2S removal efficiency and sulfur selectivity at 120 °C. Its outstanding performance can be attributed to the synergistic effect of Fe-Ag clusters. During H2S selective oxidation, Fe serves as the active site for H2S adsorption and dissociation, while Ag functions as the catalyst promoter, increasing Fe dispersion, reducing the oxidation capacity of the catalyst, improving the desorption capacity of sulfur, and facilitating the reaction between active oxygen species and [HS]. This process provides a potential route for enhancing COG desulfurization.


Subject(s)
Coke , Hydrogen Sulfide , Adsorption , Hydrogen , Sulfides , Temperature
4.
Water Res ; 232: 119685, 2023 Apr 01.
Article in English | MEDLINE | ID: mdl-36739661

ABSTRACT

Ubiquitous macromolecular natural organic matter (NOM) in wastewater seriously influences the removal of emerging small-molecule contaminants via heterogeneous advanced oxidation processes because this material covers active sites and quenches reactive oxygen species. Here, sponge-like magnetic manganese ferrite (MnFe2O4-S) with a three-dimensional hierarchical porous structure was prepared via a facile solvent-free molten method. Compared with the particle-like structure of MnFe2O4-P, the sponge-like structure of MnFe2O4-S presents an enlarged specific surface area (112.14 m2·g-1 vs. 58.73 m2·g-1) and a smaller macropore diameter (68.2-77.2 nm vs. 946.5 nm). Enlarging the specific surface area increases the exposure of active sites, and adjusting the pore size helps sieve NOM and emerging contaminants. These changes are expected to effectively improve the degradation activity and overcome interference. To confirm the superiority of the sponge-like structure, MnFe2O4-S was used to activate peroxymonosulfate (PMS) for the degradation of multiple emerging contaminants, and its ability to degrade bisphenol A with and without humic acid (HA) was compared with that of MnFe2O4-P. The degradation activity of MnFe2O4-S was 1.6 times greater than that of MnFe2O4-P. Moreover, 20 mg·L-1 HA inhibited the degradation activity of MnFe2O4-S by only 7.1%, which was much lower than that obtained for MnFe2O4-P (53.4%). In addition, the excellent performance was maintained in multiple water matrices. Notably, under lake water matrices, the degradation activity of MnFe2O4-P was inhibited by 35.6% while that of MnFe2O4-S was hardly inhibited. More importantly, the MnFe2O4-S/PMS system was also applicable to the treatment of actual wastewater and 73.0% and 90.1% of total organic carbon and chemical oxygen demand was removed from bio-treated coking wastewater containing non-biodegradable contaminants and NOM. This study provides an alternative route for the green production of high-activity porous spinel ferrites with environmental anti-interference properties.


Subject(s)
Wastewater , Water , Solvents , Porosity
5.
ACS Omega ; 7(8): 6710-6720, 2022 Mar 01.
Article in English | MEDLINE | ID: mdl-35252666

ABSTRACT

In this work, solar drying technology was applied for the deep dewatering of coal slime to save thermal energy and reduce the dust produced during the hot drying process of coal slime. Solar drying technology is used to dry coal slime to realize its resource utilization. The influence of solar radiation intensity and slime thickness is investigated on the drying process. The greater the solar radiation intensity (SRI) is, the faster the drying indoor air and coal slime are heated, and the faster the drying efficiency is. As the slime becomes thinner, the internal water diffusion resistance becomes smaller and the drying efficiency correspondingly becomes faster. In addition, to facilitate the application of coal slime drying in the actual project, the Page model is fitted and found to have a good fit for solar drying coal slime. Meanwhile, the optimal drying conditions are determined by analyzing the energy utilization under different conditions. It is found that the target moisture content of 10% is optimal for coal slime drying with the highest energy utilization. The laying thickness (L) of 1 cm has the highest solar thermal efficiency of 54.1%. More importantly, economic calculation and analysis are conducted in detail on solar drying. It is found that the cost of solar drying (¥38.59/ton) is lower than that of hot air drying (¥ 65.09/ton). Therefore, solar drying is a promising method for the drying of coal slime.

6.
J Hazard Mater ; 427: 127910, 2022 Apr 05.
Article in English | MEDLINE | ID: mdl-34863568

ABSTRACT

A selective separation-recovery process based on tuning organic acid was proposed to the resource recycling of spent lithium-ion batteries (LIBs) for the first time. The low-cost preparation of CoFe2O4, reuse of waste acid and recovery of Li can be realized in this process, simultaneously. Li and Co in spent LIBs can be leached efficiently using citric acid as a leaching agent, and separated effectively from leaching solution by tuning oxalic acid content. The results from the characterizations of the prepared CoFe2O4 (CoFe2O4-LIBs) show that it possesses higher ratio of Co(II)/Co(III) and Fe(II)/Fe(III), larger surface specific area and more number of acid sites in comparison with pure CoFe2O4. Besides, CoFe2O4-LIBs was used to activate peroxymonosulfate (PMS) for the degradation of bisphenol A (BPA). Interestingly, its degradation performance is superior to that of pure CoFe2O4 and the related Co-based catalysts. The excellent degradation performance can be maintained in presence of inorganic ions (e.g., Cl-, HCO3-, H2PO4- and NO3-) with high concentration or humic acid. Moreover, surface-bound SO4∙- is considered as the main reactive species for the degradation of BPA. More importantly, CoFe2O4-LIBs can be readily recycled by using an external magnet and own superior ability of regeneration.

SELECTION OF CITATIONS
SEARCH DETAIL
...