ABSTRACT
The paper provided a comprehensive evaluation of the mechanism and design of intermittent aeration activated sludge process for nitrogen removal. Based on the specific character of the process the total cycle time, (T(C)), the aerated fraction, (AF), and the cycle time ratio, (CTR) were defined as major design parameters, aside from the sludge age of the system. Their impact on system performance was evaluated by means of process simulation. A rational design procedure was developed on the basis of basic stochiometry and mass balance related to the oxidation and removal of nitrogen under aerobic and anoxic conditions, which enabled selected of operation parameters of optimum performance. The simulation results indicated that the total nitrogen level could be reduced to a minimum level by appropriate manipulation of the aerated fraction and cycle time ratio. They also showed that the effluent total nitrogen could be lowered to around 4.0 mgN/L by adjusting the dissolved oxygen set-point to 0.5 mg/L, a level which promotes simultaneous nitrification and denitrification.
Subject(s)
Nitrogen/isolation & purification , Sewage/chemistry , Sewage/microbiology , Aerobiosis , DenitrificationABSTRACT
This paper covers an evaluation of more than twenty full-scale industrial wastewater treatment plants employing sequencing batch reactor (SBR) process mainly for carbon removal and a pilot-scale SBR designed for carbon and nitrogen removal from tannery effluent. The study highlights the major features of the SBR technology and proposes a rational dimensioning approach for carbon and nitrogen removal SBRs treating high strength industrial wastewaters based on scientific information on process stoichiometry and modeling, also emphasizing practical constraints in design and operation.
Subject(s)
Bioreactors , Nitrogen/isolation & purification , Waste Disposal, Fluid/methods , Water Purification/methods , Facility Design and Construction , Industrial Waste , Nitrogen/metabolism , Waste Disposal, Fluid/instrumentation , Water Purification/instrumentationABSTRACT
Enhanced biological phosphorus removal (EBPR) requires an anaerobic-aerobic sequence and short chain fatty acids, namely acetate. It is also known that the presence of nitrate in the anaerobic phase inhibits EBPR. This study describes a lab-scale experimentation carried out to study the effect of different substrates on EBPR and behaviour of PAOs under anoxic conditions in a sequencing batch reactor operated using synthetic wastewater. Experimental data show that the EBPR performance is significantly affected by glucose rich influent. Low COD/TKN ratios caused lower phosphorus removal performance since nitrate entering the anaerobic zone consumes substrate for denitrification. The results also show that anoxic phosphate uptake took place together with nitrate reduction when there was no external substrate. However, the uptake rate under anoxic conditions was lower than that under aerobic conditions.
