Impact of introducing 3D printing-assisted surgery into clinical practice for traumatic pelvic and acetabular fractures.

Background: Given the novelty of three-dimensional (3D) printing-assisted fracture surgery in orthopaedics, surgeon familiarity is limited and learning curve is high. As such, it is unclear how the introduction of 3D printing into clinical practice for pelvic and acetabular fracture surgery would impact perioperative outcomes. The aim of this study was to determine the impact of introducing 3D printing-assisted surgery on perioperative outcomes for traumatic pelvic and acetabular fractures. Methods: We retrospectively identified consecutive patients who underwent surgical fixation of traumatic pelvic and acetabular fractures from 2018 to 2022 at a single tertiary hospital. The patients included in the study were divided into two groups: (1) 3D printing-assisted surgery and (2) conventional surgery. Baseline demographics and perioperative outcomes of total surgical duration, estimated blood loss, blood transfusion, number fluoroscopy images, fluoroscopy duration and postoperative disposition were recorded and compared between the two groups. Results: In total, 26 patients were included in the present study, with 3D printing-assisted surgery being used in 34.6 % (n = 9) of cases. There were no significant differences in baseline demographics or fracture type between the 3D printing group and conventional group. As compared to patients who underwent conventional surgery, those that underwent 3D printing-assisted surgery had, on average, shorter surgical duration (299.8 ± 88.2 vs 309.1 ± 143.1 min), lesser estimated blood loss (706.3 ± 330.0 vs 800.0 ± 584.2 ml), lower transfusion rates (50.0 % vs 52.9 %), lower number of intraoperative fluoroscopy images (62.8 ± 74.5 vs 71.6 ± 47.9 images) and shorter fluoroscopy duration (235.0 ± 79.2 vs 242.3 ± 83.5 min), although statistical significance was not achieved. None of the patients in the present study developed surgical complications postoperatively. Conclusion: The introduction of 3D printing-assisted surgery in clinical practice for pelvic and acetabular fractures is a safe and viable adjunct in pelvic and acetabular surgery, achieving comparable perioperative outcomes in the initial phase.

Femoral neck system as a safe alternative to cannulated compression screw and dynamic hip screw in femoral neck fractures: an early comparative study.

INTRODUCTION: The femoral neck system (FNS) is a safe alternative to cannulated compression screw (CCS) and dynamic hip screw (DHS) in femoral neck fractures. METHODS: A dual-centre retrospective cohort study was performed on femoral neck fractures (AO type 31-B) treated with closed reduction and internal fixation using FNS, DHS or CCS between April 2016 and April 2020. Exclusion criteria were as follows: patients aged below 16 years; chronic fractures beyond 7 days; pathological fractures; fracture extension to the intertrochanteric region or ipsilateral neck and shaft fractures; and open fractures. A total of 85 patients were identified: FNS (n = 28), DHS (n = 29) and CCS (n = 28). RESULTS: The FNS and CCS groups had a lower Garden and Pauwels classification compared to the DHS group (both P < 0.001). Both FNS and CCS groups were comparable in postoperative orthopaedic complications (10.7% [n = 3] vs. 3.6% [n = 1], adjusted P = 0.321). The DHS group had more postoperative orthopaedic complications than the FNS group, but this was not statistically significant (27.6% [n = 8] vs. 10.7% [n = 3], adjusted P = 0.321). There were no significant differences in median time to radiological union or median femoral neck shortening at union (both P > 0.05) among the three groups. CONCLUSION: The new DePuy Synthes FNS is a safe alternative to CCS with comparable complication rates for femoral neck fractures that are less displaced and more stable. The FNS also appears to be a safe alternative to DHS in the fixation of femoral neck fractures for the few cases of high-energy femoral neck fractures.

3D-printed patient specific surgical guides: Balancing accuracy with practicality.

Introduction: Three-dimensional (3D) printing technology has been used in orthopaedic surgery in recent years to manufacture customized surgical cutting jigs. However, there is scarcity of literature and information regarding the optimal parameters of an ideal jig. Our study aims to determine the optimum parameters to design surgical jigs that can produce accurate cuts, and remain practical for use, to serve as a guide for jig creation in future. Methods and materials: A biomechanical lab study was designed to investigate whether the thickness of a jig and the height of its cutting slot can significantly affect cutting accuracy. Surgical jigs were 3D printed in medical grade, and an oscillating sawblade was used to mimic intraoperative surgical cuts through the cutting slots onto wooden blocks, which were then analysed to determine the accuracy of cuts. Results: Statistical analysis was performed on a total of 72 cuts. The cutting accuracy increased when the thickness of the jig increased, at all slot heights. The cutting accuracy also increased as the slot height decreased, at all jig thicknesses. Overall, the parameters for jig construction that yielded the most accurate cuts were a jig thickness of 15 mm, in combination with a slot height of 100 % of the width of the sawblade. Additionally, at a jig thickness of 15 mm, there was no statistically significant difference in cutting accuracy when increasing the slot height to 120 %. Conclusion: This study is the first to propose tangible parameters that can be applied to surgical jig construction to obtain reproducible accurate cuts. Provided that a jig of 15 mm thickness can be accommodated by the size of the wound, the ideal surgical jig with a superior balance of accuracy and useability is 15 mm thick, with a cutting slot height of 120 % of the sawblade thickness.

Effectiveness of anabolic steroids in improving outcomes for post-operative hip fracture patients: A randomized controlled trial.

Background: Post-operative elderly hip fracture patients require significant rehabilitation. Nandrolone is an anabolic steroid used to promote muscle growth. This study aims to examine the effect of nandrolone in improving rehabilitation and quality of life in elderly female patients with hip fractures undergoing hemiarthroplasty. Methods: This is a double-blinded prospective randomized-controlled-trial consisting of female patients above the age of 65 with an isolated neck of femur fracture planned for a hip hemiarthroplasty. Participants were randomized into two arms of the study - 50 mg intramuscular nandrolone vs normal saline placebo administered on post-operative day 0, and weeks 2, 6 and 12. The participants were followed up across a 1-year period following the surgery. Clinical outcomes such as time taken to achieve rehabilitation milestones, distance of ambulation and thigh muscle girth, and functional scoring with SF-36 questionnaire were recorded at intervals of 2, 6 and 12 weeks, 6 months and 1 year following the surgery. Results: There were a total of 23 subjects with 11 in the steroid group and 12 in the placebo group. There was no significant difference in demographics and injury patterns between both groups. There was no significant difference for time taken to achieve various rehabilitation milestones and distance of ambulation. SF-36 scores on discharge and at 1-year follow-up mark were comparable. There was no difference in the complication rate between both groups. Conclusion: Intra-muscular Nandrolone after hip surgery in elderly female patients does not result in short to mid-term improved rehabilitation or functional outcomes. Nandrolone did not result in increased short-term complications after hip surgery. Level of evidence: I.

3D printed patient specific customised surgical jig for reverse shoulder arthroplasty, a cost effective and accurate solution.

INTRODUCTION: The reverse shoulder arthroplasty is a common orthopaedic procedure, where placement of the initial guiding wire is paramount to the implant instrumentation and position. To improve the position of the guiding wire, navigation and patient specific instrumentation have been used. These are however expensive and lengthy with many logistical issues. MATERIAL AND METHODS: We utilised in house 3D printing to create a surgical guide to help with positioning of the central guiding wire. Pre and post op CT scans were utilised to determine positioning of the central screw. RESULTS: Position of the screw tip was a mean of 3.3 mm away from the central point of the thickest portion of bone in the scapula with good bony purchase. There were no complications reported. DISCUSSION: We report our experience in creation of the 3D printed surgical jig and the pearls of its creation, detailing from CT scan image acquisition to creation of surgical guide to intraoperative usage. 3D printing is a cost effective and accurate solution for the positioning of orthopaedic instrumentation. This can be easily applied to other operations in our institution, even with a low start up cost.

Functional Outcomes of Patients with Schizophrenia After Hip Fracture Surgery: A 1-Year Follow-up from an Institutional Hip Fracture Registry.

BACKGROUND: Schizophrenia impairs a patient's self-care abilities, which are crucial after a hip fracture. Studies on the outcomes of patients with schizophrenia after a hip fracture are dated. This study aims to investigate the complication rates, 1-year mortality, and functional outcomes of surgically managed hip fractures in elderly patients with schizophrenia. METHODS: This is a retrospective, single-institution cohort study based on a prospectively maintained registry of patients with hip fracture. In this study, 3,056 patients who were ≥60 years of age were treated under a geriatric-orthopaedic hip fracture pathway from January 2014 to December 2018. Baseline demographic characteristics and the Modified Barthel Index (MBI) scores were obtained at admission and at 6 months and 1 year after the fracture. Complications from the fracture and the surgical procedure were recorded during a minimum follow-up period of 2 years. A matching process (based on age, sex, and the MBI at admission) of up to 6 patients without schizophrenia per 1 patient with schizophrenia was utilized to increase power. Differences in perioperative, 6-month, and 1-year outcomes were compared for significance among surgically managed patients with schizophrenia and patients without schizophrenia. RESULTS: Thirty-eight patients with schizophrenia were compared with 170 geriatric patients without schizophrenia who underwent a surgical procedure for a hip fracture. Patients with schizophrenia were more likely to be institutionalized postoperatively (26.3% compared with 4.7%; p < 0.001). Patients with schizophrenia had poorer MBI scores at 12 months (76 compared with 90 points; p = 0.006). The 1-year mortality rate was comparable (p = 0.29) between patients with schizophrenia (5.7%) and those without schizophrenia (2.4%). Similar trends in MBI were observed in the conservatively managed group of patients. CONCLUSIONS: There was no increase in postoperative complications after a surgical procedure for a hip fracture in elderly patients with schizophrenia. The 1-year mortality after a surgical procedure for hip fracture is similar in both patients with schizophrenia and those without schizophrenia. Patients with schizophrenia and hip fracture who were surgically managed had poorer 1-year functional outcomes compared with patients without schizophrenia matched for age, sex, and MBI at admission. This information will be useful in shared decision-making discussions with patients and families. LEVEL OF EVIDENCE: Prognostic Level III. See Instructions for Authors for a complete description of levels of evidence.