ABSTRACT
Poly(acrylic acid) (PAH), which is a water soluble polycarboxylic acid, is neutralized by adding different amounts of LiOH, NaOH, KOH, and ammonia (NH4OH) aqueous solutions to fix neutralization degrees. The differently neutralized polyacid, alkali and ammonium polyacrylates are examined as polymeric binders for the preparation of Si-graphite composite electrodes as negative electrodes for Li-ion batteries. The electrode performance of the Si-graphite composite depends on the alkali chemicals and neutralization degree. It is found that 80% NaOH-neutralized polyacrylate binder (a pH value of the resultant aqueous solution is ca. 6.7) is the most efficient binder to enhance the electrochemical lithiation and de-lithiation performance of the Si-graphite composite electrode compared to that of conventional PVdF and the other binders used in this study. The optimum polyacrylate binder highly improves the dispersion of active material in the composite electrode. The binder also provides the strong adhesion, suitable porosity, and hardness for the composite electrode with 10% (m/m) binder content, resulting in better electrochemical reversibility. From these results, the factors of alkali-neutralized polyacrylate binders affecting the electrode performance of Si-graphite composite electrodes are discussed.
ABSTRACT
A carbon-felt-based multi-enzyme immobilized bioanode for biofuel cells has been successfully developed. The combination of four enzymes, namely, invertase, mutarotase, glucose oxidase, and fructose dehydrogenase, makes it possible to use sucrose--a disaccharide--as fuel for the bioanode. The new electrode exhibits a high oxidation current density of about 12 mA cm(-2) (0.25 V vs. Ag/AgCl) in a McIlvaine buffer solution containing sucrose at pH 6.0 in the half-cell configuration. A sucrose/O(2) biofuel cell composed of the bioanode and an opposite biocathode, including bilirubin oxidase as the enzymatic electrocatalyst, was fabricated, and the new device demonstrated a maximum power density of 2.90 mW cm(-2) with an open-circuit voltage of 0.69 V in the McIlvaine buffer solution. The biofuel cell fabricated using our multi-enzyme anode operates in commercially available beverages that contain only sugar, even without glucose.
Subject(s)
Carbon/chemistry , Enzymes, Immobilized/chemistry , Sucrose/chemistry , Bioelectric Energy Sources , Carbohydrate Epimerases/chemistry , Electrodes , Fructose/chemistry , Glucose/chemistry , Glucose Oxidase/chemistry , Nanotubes, Carbon/chemistry , Oxidation-Reduction , Oxidoreductases/chemistry , Oxidoreductases Acting on CH-CH Group Donors/chemistry , Oxygen/chemistry , beta-Fructofuranosidase/chemistryABSTRACT
A red blood cell (RBC) from human exhibited direct electron transfer (DET) activity on a bare indium tin oxide (ITO) electrode. A formal potential of -0.152 V vs. a silver-silver chloride saturated potassium chloride (Ag|AgCl|KCl(satd.)) was estimated for the human RBC (type AB) from a pair of redox peaks at around 0.089 and -0.215 V (vs. Ag|AgCl|KCl(satd.)) on cyclic voltammetric (CV) measurements in a phosphate buffered saline (PBS; 39 mM; pH 7.4) solution. The results agreed well with those of a redox couple for iron-bearing heme groups in hemoglobin molecules (HbFe(II)/HbFe(III)) on the bare ITO electrodes, indicated that DET active species were hemoglobin (Hb) molecules encapsulated by a phospholipid bilayer membrane of the human RBC. The quantity of electrochemically active Hb in the human RBC was estimated to be 30 pmol cm(-2). In addition, the human RBC exhibited oxygen reduction reaction (ORR) activity in the dioxygen (O2) saturated PBS solution at the negative potential from ca. -0.15 V (vs. Ag|AgCl|KCl(satd.)). A single cell test proved that a biofuel cell (BFC) with an O2|RBC|ITO cathode showed the open-circuit voltage (OCV) of ca. 0.43 V and the maximum power density of ca. 0.68 µW cm(-2).
