ABSTRACT
Considering the high-speed and high power density technical specifications of new energy vehicle motors, there is a growing demand for rotor strength as motor peak speeds reach 20,000 r/min and beyond. The utilization of non-oriented silicon steel with a high yield strength in rotors has emerged as a promising approach to increase motor speed. However, the magnetic and mechanical properties of high-strength silicon steel under variable temperature conditions have not been fully explored, particularly in regards to their impact on motor torque, efficiency, and speed. This manuscript investigates the behavior of high-strength silicon steel before and after annealing and at different temperatures, analyzing its influence on high-speed motor performance. The validity and feasibility of this study are confirmed through prototype testing, providing a comprehensive reference for engineering design.
ABSTRACT
Because the magnetic properties of an amorphous alloy (AA) obviously change with the change of temperature, a finite element simulation method for a motor, considering the effect of temperature, is proposed in this paper. In the early design stage of the high-speed permanent magnet synchronous motor (PMSM), the simulation of motor performance is mainly based on the magnetic performance test data at room temperature provided by the material's manufacturer. However, the influence of the temperature rise during the actual operation of the motor will lead to large errors between the simulation results and the measured results. Therefore, it is of great practical significance to measure the magnetic properties of the AA at different temperatures and use them for simulation purposes. In this paper, the magnetization characteristics and iron loss characteristics of the AA and silicon steel (ST100) used for comparison are measured at different temperatures, and the iron loss separation of the two materials at different temperatures is completed, and the hysteresis loss coefficient and eddy current loss coefficient at different temperatures are obtained. On this basis, the performance simulation of a motor model is carried out. The more accurate simulation method proposed in this paper can provide a reference for the design of AA motors in industry.
ABSTRACT
This study proposed and tested the cross-sectional effects of patient-centered communication (PCC) on cancer screening behaviors via an affective-cognitive sequential chain of mediation through cancer worry and health self-efficacy. Cross-sectional data were analyzed from four iterations of the Health Information National Trends Survey (2011, 2014, 2017, and 2020). The results found that lowered cancer worry following PCC does not show a cross-sectional positive effect in promoting cancer screening behaviors, while enhanced health self-efficacy as a subsequent state is a facilitator of screening behaviors. The findings further demonstrated increased PCC, a rise in cancer worry, and a sustained level of health self-efficacy. Also, our research has identified an upward trend in cancer screening behaviors from 2011 to 2017, followed by a notable decrease in 2020. These insights underscore the nuanced ways PCC can foster cancer screening behaviors, emphasizing the importance of emotional and cognitive aspects in clinical settings.
ABSTRACT
Upgrading furfuralcohols and furfurals to furancarboxylic acids is of great significance for high value-added downstream chemicals synthesis and biomass conversion. Developing an efficient catalyst is the key to acquiring a completely sustainable process. Herein, nitrogen-doped carbon-supported bimetallic AuPd bowl-like catalysts were synthesized. The surface wettability of nitrogen-doped carbon was well adjusted by the nitrification process. Benefiting from the alloying effect of bimetallic AuPd catalyst and the formation of hydroxyl radical initiated by H2 O dissociation on the hydrophilic surface of nitrated nitrogen-doped carbon, base-free aerobic oxidation of 5-hydroxymethylfurfural (HMF) could produce the highest 2,5-furandicarboxylic acid (FDCA) yield of 93.9 %. In-situ infrared spectroscopy uncovered adsorption configuration of HMF, and the nitrated carbon surface was favorable for HMF and intermediates to enter the active sites, greatly promoting the catalytic oxidation process. Employing other furfuralcohols (furfuryl alcohol, furan-2,5-diyldimethanol, 2,5-bishydroxymethylfuran) as well as furfural and 5-methylfurfural as starting materials, 35.6-95.4 % yield of furancarboxylic acids (FDCA, 2-furoic acid, 5-methyl-2-furoic acid) were also obtained. Moreover, the developed catalysts could maintain excellent stability and activity after four successive runs. This deep insight into the role of bimetallic synergy and surface wettability provides a basis for the rational design of the highly efficient catalysts for the oxidation of furfuralcohols and furfurals and related reactions.
Subject(s)
Carbon , Furaldehyde , Carbon/chemistry , Catalysis , Dicarboxylic Acids/chemistry , Furaldehyde/chemistry , NitrogenABSTRACT
Objective: Dry Weight (DW) is a typical hemodialysis (HD) prescription for End-Stage Renal Disease (ESRD) patients. However, an accurate DW assessment is difficult due to the complication of body components and individual variations. Our objective is to model a clinically practicable DW estimator. Method: We proposed a time series-based regression method to evaluate the weight fluctuation of HD patients according to Electronic Health Record (EHR). A total of 34 patients with 5100 HD sessions data were selected and partitioned into three groups; in HD-stabilized, HD-intolerant, and near-death. Each group's most recent 150 HD sessions data were adopted to evaluate the proposed model. Results: Within a 0.5 kg absolute error margin, our model achieved 95.44%, 91.95%, and 83.12% post-dialysis weight prediction accuracies for the HD-stabilized, HD-intolerant, and near-death groups, respectively. Within a 1%relative error margin, the proposed method achieved 97.99%, 95.36%, and 66.38% accuracies. For HD-stabilized patients, the Mean Absolute Error (MAE) of the proposed method was 0.17 kg ± 0.04 kg. In the model comparison experiment, the performance test showed that the quality of the proposed model was superior to those of the state-of-the-art models. Conclusion: The outcome of this research indicates that the proposed model could potentially automate the clinical weight management for HD patients. Clinical Impact: This work can aid physicians to monitor and estimate DW. It can also be a health risk indicator for HD patients.
ABSTRACT
A modified method based on in situ chemical reduction was developed to prepare mono-dispersed polystyrene/silver (PS/Ag) composite microspheres. In this approach; mono-dispersed PS microspheres were synthesized through dispersion polymerization using poly-vinylpyrrolidone (PVP) as a dispersant at first. Then, poly-dopamine (PDA) was fabricated to functionally modify the surfaces of PS microspheres. With the addition of [Ag(NH3)2]⺠to the PS dispersion, [Ag(NH3)2]⺠complex ions were absorbed and reduced to silver nanoparticles on the surfaces of PS-PDA microspheres to form PS/Ag composite microspheres. PVP acted both as a solvent of the metallic precursor and as a reducing agent. PDA also acted both as a chemical protocol to immobilize the silver nanoparticles at the PS surface and as a reducing agent. Therefore, no additional reducing agents were needed. The resulting composite microspheres were characterized by TEM, field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDS), XRD, UV-Vis and surface-enhanced Raman spectroscopy (SERS). The results showed that Ag nanoparticles (NPs) were homogeneously immobilized onto the PS microspheres' surface in the presence of PDA and PVP. PS/Ag composite microspheres were well formed with a uniform and compact shell layer and were adjustable in terms of their optical property.
