3D DNA Walker-Assisted CRISPR/Cas12a Trans-Cleavage for Ultrasensitive Electrochemiluminescence Detection of miRNA-141.

In this study, a CRISPR/Cas12a (LbCpf1)-mediated electrochemiluminescence (ECL) paper-based platform on the basis of a three-dimensional (3D) DNA walker was proposed for the ultrasensitive detection of miRNA-141. Initially, 3D-rGO with a tremendous loading space was modified on the paper working electrode (PWE) to construct an excellent conductive substrate and facilitate the growth of AuPd nanoparticles (NPs). Afterward, the AuPd NPs were introduced as the coreaction emitter medium of the 3D-rGO/PWE to provide convenience for the transformation between S2O82- and SO42-, amplifying the ECL emission of g-C3N4 nanosheets (NSs). Meanwhile, with the help of Nt.BsmAI nicking endonuclease, a 3D DNA walker signal amplifier was designed to convert and magnify the target miRNA-141 into a particular trigger sequence, which could act as activator DNA to motivate the trans-acting deoxyribonuclease activity of CRISPR/Cas12a to further achieve efficient annihilation of the ECL signal. Furthermore, the proposed multimechanism-driven biosensor exhibited excellent sensitivity and specificity, with a relatively low detection limit at 0.331 fM (S/N = 3) in the concentration range between 1 fM and 10 nM. Consequently, the designed strategy not only extended the application scope of CRISPR/Cas12a but also devoted a new approach for the clinical diagnosis of modern medicine.

In situ assembly of porous Au-paper electrode and functionalization of magnetic silica nanoparticles with HRP via click chemistry for Microcystin-LR immunoassay.

A simple, low-cost and sensitive origami electrochemical immunoassay-device was developed based on a novel gold nanoparticle modified porous paper working electrode (Au-PWE) for point-of-care testing. Azide-functionalized Au-PWE was prepared by the functionalization of Au-PWE with 1-azidoundecan-11-thiol. Alkyne end-terminated antibody was prepared with 4-pentynoic acid and antibody by the 1-ethyl-3-(3-(dimethylamino) propyl) carbodiimide hydrochloride and N-hydroxysuccinimide activation reaction. Alkyne-antibody was coupled to azido-Au-PWE by click reaction as a recognition element. Nearly monodispersed sphere-like silica-coated ferroferric oxide (Fe3O4@SiO2) nanoparticles were prepared via the reverse microemulsion method. Azide-functionalized Fe3O4@SiO2 was prepared by the functionalization of silica shell with 3-bromopropyltrichlorosilane followed by substitution with sodium azide. Alkyne-functionalized antibody and horse radish peroxidase were coupled to azide-functionalized Fe3O4@SiO2 by click reaction as signal label. Horse radish peroxidase and ferroferric oxide could catalyze the oxidation of thionine in the presence of hydrogen peroxide. After the sandwich immunoreaction, the current was proportional to the logarithm of the Microcystin-LR. The linear regression equation was i(µA)=119.89+46.27 log cMC-LR (µg/mL) in the range from 0.01 to 200 µg/mL. The limit of detection was 0.004 µg/mL. This immunoassay would provide a universal immunoassay method in environmental monitoring and public health.

Electrochemiluminescence of blue-luminescent graphene quantum dots and its application in ultrasensitive aptasensor for adenosine triphosphate detection.

A simple approach based on exfoliating and disintegrating treatments for graphite oxide, followed by hydrothermal synthesis, was developed to prepare water-soluble graphene quantum dots (GQDs). The as-prepared GQDs exhibited bright blue emission under ultraviolet irradiation (∼365nm), and showed an excitation-independent photoluminescence feature. More importantly, a newly anodic electrochemiluminescence (ECL) was observed from the water-soluble GQDs with H2O2 as coreactant for the first time, and the ECL induced a strong light emission at a low potential (ca. 0.4V vs. Ag/AgCl). The ECL mechanism is investigated in detail. Employing SiO2 nanospheres as signal carrier, a novel SiO2/GQDs ECL signal amplification labels were synthesized based on which a ultrasensitive ECL aptamer sensor was proposed. Under the optimized experimental conditions, the proposed ECL aptamer sensor exhibited excellent analytical performance for adenosine triphosphate (ATP) determination, ranging from 5.0×10(-12) to 5.0×10(-9)molL(-1) with the detection limit of 1.5×10(-12)molL(-1). Due to the low cytotoxicity and excellent biocompatibility, GQDs are demonstrated to be an eco-friendly material as well as excellent ECL labeling agents for biosensor.

A microfluidic origami electrochemiluminescence aptamer-device based on a porous Au-paper electrode and a phenyleneethynylene derivative.

A simple, low-cost, and sensitive 3D microfluidic origami electrochemiluminescence aptamer-device was developed based on a novel gold nanoparticle modified porous paper working electrode for point-of-care diagnosis.

Paper-based electrochemiluminescent 3D immunodevice for lab-on-paper, specific, and sensitive point-of-care testing.

Recent research on microfluidic paper-based analytical devices (µPADs) has shown that paper has great potential for the fabrication of low-cost diagnostic devices for healthcare and environmental monitoring applications. Herein, electrochemiluminescence (ECL) was introduced for the first time into µPADs that were based on screen-printed paper-electrodes. To further perform high-specificity, high-performance, and high-sensitivity ECL on µPADs for point-of-care testing (POCT), ECL immunoassay capabilities were introduced into a wax-patterned 3D paper-based ECL device, which was characterized by SEM, contact-angle measurement, and electrochemical impedance spectroscopy. With the aid of a home-made device-holder, the ECL reaction was triggered at room temperature. By using a typical tris(bipyridine)ruthenium-tri-n-propylamine ECL system, this paper-based ECL 3D immunodevice was applied to the diagnosis of carcinoembryonic antigens in real clinical serum samples. This contribution further expands the number of sensitive and specific detection modes of µPADs.

Three-dimensional paper-based electrochemiluminescence immunodevice for multiplexed measurement of biomarkers and point-of-care testing.

In this work, electrochemiluminescence (ECL) immunoassay was introduced into the recently proposed microfluidic paper-based analytical device (µPADs) based on directly screen-printed electrodes on paper for the very first time. The screen-printed paper-electrodes will be more important for further development of this paper-based ECL device in simple, low-cost and disposable application than commercialized ones. To further perform high-performance, high-throughput, simple and inexpensive ECL immunoassay on µPAD for point-of-care testing, a wax-patterned three-dimensional (3D) paper-based ECL device was demonstrated for the very first time. In this 3D paper-based ECL device, eight carbon working electrodes including their conductive pads were screen-printed on a piece of square paper and shared the same Ag/AgCl reference and carbon counter electrodes on another piece of square paper after stacking. Using typical tris-(bipyridine)-ruthenium (Ⅱ) - tri-n-propylamine ECL system, the application test of this 3D paper-based ECL device was performed through the diagnosis of four tumor markers in real clinical serum samples. With the aid of a facile device-holder and a section-switch assembled on the analyzer, eight working electrodes were sequentially placed into the circuit to trigger the ECL reaction in the sweeping range from 0.5 to 1.1 V at room temperature. In addition, this 3D paper-based ECL device can be easily integrated and combined with the recently emerging paper electronics to further develop simple, sensitive, low-cost, disposable and portable µPAD for point-of-care testing, public health and environmental monitoring in remote regions, developing or developed countries.