Predicting NOx Distribution in a Micro Rich-Quench-Lean Combustor Using a Variational Autoencoder.

Micro gas turbines are widely used in distributed power generation systems. However, the combustion of gas turbine combustors produces a large amount of nitrogen oxides (NOx), which pollute the environment and endanger human life. To reduce environmental pollution, low-emission combustors have been developed. In recent years, there has been an increasing focus on the use of low-heat-value gas fuels, and it is necessary to study the NOx emissions from low heat value gas fuel combustors. Data-driven deep learning methods have been used in many fields in recent years. In this study, a variational autoencoder was introduced for the prediction of NOx production inside the combustor. The combustor used was a micro rich-quench-lean combustor designed by the research group using coal bed gas as a fuel. The internal NO distribution contour was obtained as the dataset using simulation methods, with a size of 60 images. The model architecture parameters were obtained through hyperparameter exploration using the grid search method. The model accurately predicted the distribution of NO inside the combustor. The method can be applied in the prediction of a wider range of parameters and offers a new way of designing combustors for the power industry.

Optimisation and Efficiency Improvement of Electric Vehicles Using Computational Fluid Dynamics Modelling.

Due to the rise in awareness of global warming, many attempts to increase efficiency in the automotive industry are becoming prevalent. Design optimization can be used to increase the efficiency of electric vehicles by reducing aerodynamic drag and lift. The main focus of this paper is to analyse and optimise the aerodynamic characteristics of an electric vehicle to improve efficiency of using computational fluid dynamics modelling. Multiple part modifications were used to improve the drag and lift of the electric hatchback, testing various designs and dimensions. The numerical model of the study was validated using previous experimental results obtained from the literature. Simulation results are analysed in detail, including velocity magnitude, drag coefficient, drag force and lift coefficient. The modifications achieved in this research succeeded in reducing drag and were validated through some appropriate sources. The final model has been assembled with all modifications and is represented in this research. The results show that the base model attained an aerodynamic drag coefficient of 0.464, while the final design achieved a reasonably better overall performance by recording a 10% reduction in the drag coefficient. Moreover, within individual comparison with the final model, the second model with front spitter had an insignificant improvement, limited to 1.17%, compared with 11.18% when the rear diffuser was involved separately. In addition, the lift coefficient was significantly reduced to 73%, providing better stabilities and accounting for the safety measurements, especially at high velocity. The prediction of the airflow improvement was visualised, including the pathline contours consistent with the solutions. These research results provide a considerable transformation in the transportation field and help reduce fuel expenses and global emissions.

Parameter Determination and Ion Current Improvement of the Ion Current Sensor Used for Flame Monitoring.

Flame monitoring of industrial combustors with high-reliability sensors is essential to operation security and performance. An ion current flame sensor with a simple structure has great potential to be widely used, but a weak ion current is the critical defect to its reliability. In this study, parameters of the ion current sensor used for monitoring flames on a Bunsen burner are suggested, and a method of further improving the ion current is proposed. Effects of the parameters, including the excitation voltage, electrode area, and electrode radial and vertical positions on the ion current, were investigated. The ion current grew linearly with the excitation voltage. Given that the electrodes were in contact with the flame fronts, the ion current increased with the contact area of the cathode but independent of the contact area of the anode. The smaller electrode radial position resulted in a higher ion current. The ion current was insensitive to the anode vertical position but largely sensitive to the cathode vertical position. Based on the above ion current regularities, the sensor parameters were suggested as follows: The burner served as a cathode and the platinum wire acted as an anode. The excitation voltage, anode radial and vertical positions were 120 V, 0 mm, and 6 mm, respectively. The method of further improving the ion current by adding multiple sheet cathodes near the burner exit was proposed and verified. The results show that the ion current sensor with the suggested parameters could correctly identify the flame state, including the ignition, combustion, and extinction, and the proposed method could significantly improve the magnitude of the ion current.