Room-temperature stabilizing strongly competing ferrielectric and antiferroelectric phases in PbZrO3 by strain-mediated phase separation.

PbZrO3 has been broadly considered as a prototypical antiferroelectric material for high-power energy storage. A recent theoretical study suggests that the ground state of PbZrO3 is threefold-modulated ferrielectric, which challenges the generally accepted antiferroelectric configuration. However, such a novel ferrielectric phase was predicted only to be accessible at low temperatures. Here, we successfully achieve the room-temperature construction of the strongly competing ferrielectric and antiferroelectric state by strain-mediated phase separation in PbZrO3/SrTiO3 thin film. We demonstrate that the phase separation occurs spontaneously in quasi-periodic stripe-like patterns under a compressive misfit strain and can be tailored by varying the film thickness. The ferrielectric phase strikingly exhibitsa threefold modulation period with a nearly up-up-down configuration, which could be stabilized and manipulated by the formation and evolution of interfacial defects under applied strain. The present results construct a fertile ground for further exploring the physical properties and applications based on the novel ferrielectric phase.

Effects of electric field and light on resistivity switching of Eu0.7Sr0.3MnO3 thin films.

Based on the excellent piezoelectric properties of 0.7Pb(Mg1/3Nb2/3)O3-0.3PbTiO3 (PMN-PT) single crystals, a hole-doped manganite film/PMN-PT heterostructure has been constructed to achieve electric-field and light co-control of physical properties. Here, we report the resistivity switching behavior of Eu0.7Sr0.3MnO3/PMN-PT(111) multiferroic heterostructures under different in-plane reading currents, temperatures, light stimuli and electric fields, and discuss the underlying coupling mechanisms of resistivity change. The transition from the electric-field induced lattice strain effect to polarization current effect can be controlled effectively by decreasing the in-plane reading current at room temperature. With the decrease of temperature, the interfacial charge effect dominates over the lattice strain effect due to the reduced charge carrier density. In addition, light stimulus can lead to the delocalization of eg carriers, and thus enhance the lattice strain effect and suppress the interfacial charge effect. This work helps to understand essential physics of magnetoelectric coupling and also provides a potential method to realize energy-efficient multi-field control of manganite thin films.

Ferroelectric Polarization Modulated Thermal Conductivity in Barium Titanate Ceramic.

Thermal conductivity k dominates in a heat transfer medium, and a field modulated k would facilitate delicate control in thermal management technology, yet it is hardly realized in a single solid material unless with changing temperature. Herein, in BaTiO3 ceramic, a modulated k was discovered by adjusting ferroelectric polarization P, which was a conventional strategy in ferroelectric functional materials. Four different states (P1, P2, P3, P4) were obtained by controlling poling time and field strength, showing that k leaped from 2.704 ± 0.054 to 3.201 ± 0.070 W (m K)-1 with increased P. Moreover, the strong correlation between P and k was also verified by the thermal depolarization measurement from room temperature to Curie temperature. The underlying origin of P modulated k was attributed to the internal bias field, which is born in the oriented ferroelectric domains, tightening special phonon modes in BaTiO3 ceramics. Raman spectrum, P-E loops, first-order reversible curve, XRD analysis, and PFM measurement were then employed to clarify how ferroelectric polarization structurally influences phonon transport and subsequent thermal conductivity. This work will pave a brand-new research route for conventional ferroelectric ceramic, also potentiating the idea of the electric field-controlled k component and active solid heat-transport device in the future.

The phase structure and dielectric properties around a new type of phase boundary in a lead ytterbium niobite based solid solution.

The phase boundaries of dielectric materials have constantly been valuable for instructing the design of phase structures, revealing correlations between compositions and structures, and attaining the desired functional properties for piezoelectric, pyroelectric, electrostriction, electrocaloric, energy storage and energy harvesting applications. We here observe a new type of phase boundary in a solid solution of xPbTiO3·(1 - x)Pb(Yb1/2Nb1/2)O3 (x = 0.00-0.20), which is between an antiferroelectric (AFE) phase and a relaxor ferroelectric (RFE) phase. x = 0.10 is confirmed as the phase boundary. XRD, TEM, PFM and Raman spectroscopy analysis reveal two fundamental traits of the phase structure: (1) the polar state changes from AFE to FE order; and (2) the domain range evolves from micrometer-sized to nanometer-sized, both of which are normally separated but coexist around the phase boundary. The intriguing phase structure contributes to the distinctive dielectric properties: (1) a broad compositional zone (x < 0.10 and x ≥ 0.14) features low remnant polarization, low hysteresis and highly reversible domain wall motion, and is expected to be utilized for dielectric energy storage and electrostriction applications; and (2) a narrow nonergodic RFE zone (0.10 ≤ x < 0.14) demonstrates remnant and maximum polarization, co-dominated by composition and temperature, and has potential for pyroelectric and electrocaloric applications.

[Prediction of regional soil quality based on mutual information theory integrated with decision tree algorithm].

In this paper, some main factors such as soil type, land use pattern, lithology type, topography, road, and industry type that affect soil quality were used to precisely obtain the spatial distribution characteristics of regional soil quality, mutual information theory was adopted to select the main environmental factors, and decision tree algorithm See 5.0 was applied to predict the grade of regional soil quality. The main factors affecting regional soil quality were soil type, land use, lithology type, distance to town, distance to water area, altitude, distance to road, and distance to industrial land. The prediction accuracy of the decision tree model with the variables selected by mutual information was obviously higher than that of the model with all variables, and, for the former model, whether of decision tree or of decision rule, its prediction accuracy was all higher than 80%. Based on the continuous and categorical data, the method of mutual information theory integrated with decision tree could not only reduce the number of input parameters for decision tree algorithm, but also predict and assess regional soil quality effectively.