Elementary cellular automata realized by stateful three-memristor logic operations.

Cellular automata (CA) are computational systems that exhibit complex global behavior arising from simple local rules, making them a fascinating candidate for various research areas. However, challenges such as limited flexibility and efficiency on conventional hardware platforms still exist. In this study, we propose a memristor-based circuit for implementing elementary cellular automata (ECA) by extending the stateful three-memristor logic operations derived from material implication (IMP) logic gates. By leveraging the inherent physical properties of memristors, this approach offers simplicity, minimal operational steps, and high flexibility in implementing ECA rules by adjusting the circuit parameters. The mathematical principles governing circuit parameters are analyzed, and the evolution of multiple ECA rules is successfully demonstrated, showcasing the robustness in handling the stochastic nature of memristors. This approach provides a hardware solution for ECA implementation and opens up new research opportunities in the hardware implementation of CA.

Facile Preparation of a Self-Adhesive Conductive Hydrogel with Long-Term Usability.

Although conductive hydrogels (CHs) have been investigated as the wearable sensor in recent years, how to prepare the multifunctional CHs with long-term usability is still a big challenge. In this paper, we successfully prepared a kind of conductive and self-adhesive hydrogel with a simple method, and its excellent ductility makes it possible as a flexible strain sensor for intelligent monitoring. The CHs are constructed by poly(vinyl alcohol) (PVA), polydopamine (PDA), and phytic acid (PA) through the freeze-thaw cycle method. The introduction of PA enhanced the intermolecular force with PVA and provided much H+ for augmented conductivity, while the catechol group on PDA endows the hydrogel with self-adhesion ability. The PVA/PA/PDA hydrogel can directly contact with the skin and adhere to it stably, which makes the hydrogel potentially a wearable strain sensor. The PVA/PA/PDA hydrogel can monitor human motion signals (including fingers, elbows, knees, etc.) in real-time and can accurately monitor tiny electrical signals for smile and handwriting recognition. Notably, the composite CHs can be used in a normal environment even after 4 months. Because of its excellent ductility, self-adhesiveness, and conductivity, the PVA/PA/PDA hydrogel provides a new idea for wearable bioelectronic sensors.

Properties of wastepaper sludge in geopolymer mortars for masonry applications.

This paper presents the results of an investigation into the use of wastepaper sludge in geopolymer mortar systems for manufacturing construction products. The investigation was driven by the increasing demand for reuse options in paper-recycling industry. Both fresh and hardened geopolymer mortar properties are evaluated for samples incorporating dry wastepaper sludge, and the results indicate potential end-use benefits in building product manufacture. Addition of wastepaper sludge to geopolymer mortar reduces flow properties, primarily due to dry sludge absorbing water from the binder mix. The average 91-day compressive strength of mortar samples incorporating 2.5 wt% and 10 wt% wastepaper sludge respectively retained 92% and 52% of the reference mortar strength. However, contrary to the normal trend of increasing drying shrinkage with increasing paper sludge addition to Portland cement matrices, the corresponding geopolymer drying shrinkage decreased by 34% and 64%. Equally important, the water absorption of hardened geopolymer mortar decreased with increasing paper sludge content at ambient temperatures, providing good prospects of overall potential for wastepaper sludge incorporation in the production of building and masonry elements. The results indicate that, despite its high moisture absorbance due to the organic matter and residual cellulose fibre content, wastepaper sludge appears compatible with geopolymer chemistry, and hence serves as a potential supplementary additive to geopolymer cementitious masonry products.

Reuse of de-inking sludge from wastepaper recycling in cement mortar products.

This paper presents results of an investigation into the use of de-inking sludge from a paper recycling mill as feedstock material in the manufacture of cement mortar products, including masonry blocks and mortar renders. Both physical and mechanical properties of mortar specimens containing various amounts of de-inking sludge were investigated. It was observed that the addition of de-inking sludge to cement mortar at a fixed water-to-cement ratio significantly reduced flow properties and increased setting time. Water absorption and volume of permeable voids of cement mortar increased with increased dosage of de-inking sludge, with a corresponding reduction of bulk density. The 91-day compressive strength of mortar samples with 2.5 wt% and 20 wt% de-inking sludge loadings retained 83% and 62% respectively of the reference mortar strength. The corresponding drying shrinkage increased by up to 160% compared to reference samples. However, a de-inking sludge loading of up to 2.5 wt% did not significantly alter measured physical and mechanical properties. The results demonstrate that despite the high moisture absorbance of de-inking sludge due to its organic matter and residual cellulose fibre content, it serves as a potential supplementary additive and its cellulosic content proving to be an active set retardant to cementitious masonry products.