ABSTRACT
In recent decades, perovskite-type compounds (ABB'O3) have been exhaustively studied due to their unique ferroelectric properties. In this work, a systematic study aiming to prepare fine particles in the binary system SrZrO3-SrTiO3 was conducted under hydrothermal conditions in a KOH (5 M) solution at 200 °C for 4 h under a constant stirring speed of 130 rpm. The precursors employed were SrSO4 powder (<38 µm size) and coprecipitated hydrous gels of Zr(OH)4â¢9.64 H2O (Zr-gel) and Ti(OH)4â¢4.5H2O (Ti-gel), which were mixed according to the stoichiometry of the SrZr1-xTixO3 in the compositional range of 0.0 > x > 100.0 mol% Ti4+. The XRD results revealed the formation of two crystalline phases rich in Zr4+, an orthorhombic structured SrZr0.93Ti0.07O3 and a cubic structured SrZr0.75Ti0.25O3 within the compositional range of 0.1-0.5 mol of Ti4+. A cubic perovskite structured solid solution, SrTi1-xZrxO3, was preferentially formed within the compositional range of 0.5 > x > 0.1 mol% Ti4+. The SrZrO3 and SrZr0.93Ti0.07O3-rich phases had particle sizes averaging 3 µm with a cubic morphology. However, a remarkable reduction in the particle size occurred on solid solutions prepared with hydrous Ti-gel over contents of 15 mol% Ti4+ in the reaction media, resulting in the formation of nanosized particle agglomerates with a cuboidal shape self-assembled via a 3D hierarchical architecture, and the sizes of these particles varied in the range between 141.0 and 175.5 nm. The limited coarsening of the particles is discussed based on the Zr-gel and Ti-gel dehydration capability differences that occurred under hydrothermal processing.
ABSTRACT
The synthesis of partially substituted silicon hydroxyapatite (Si-HAp) nanopowders was systematically investigated via the microwave-assisted hydrothermal process. The experiments were conducted at 150 °C for 1 h using TMAS (C4H13NO5Si2) as a Si4+ precursor. To improve the Si4+ uptake in the hexagonal structure, the Si precursor was supplied above the stoichiometric molar ratio (0.2 M). The concentration of the TMAS aqueous solutions used varied between 0.3 and 1.8 M, corresponding to saturation levels of 1.5-9.0-fold. Rietveld refinement analyses indicated that Si incorporation occurred in the HAp lattice by replacing phosphate groups (PO43-) with the silicate (SiO4-) group. FT-IR and XPS analyses also confirmed the gradual uptake of SiO4- units in the HAp, as the saturation of Si4+ reached 1.8 M. TEM observations confirmed that Si-HAp agglomerates had a high crystallinity and are constituted by tiny rod-shaped particles with single-crystal habit. Furthermore, a reduction in the particle growth process took place by increasing the Si4+ excess content up to 1.8 M, and the excess of Si4+ triggered the fine rod-shaped particles self-assembly to form agglomerates. The agglomerate size that occurred with intermediate (0.99 mol%) and large (12.16 mol%) Si contents varied between 233.1 and 315.1 nm, respectively. The excess of Si in the hydrothermal medium might trigger the formation of the Si-HAp agglomerates prepared under fast kinetic reaction conditions assisted by the microwave heating. Consequently, the use of microwave heating-assisted hydrothermal conditions has delivered high processing efficiency to crystallize Si-HAp with a broad content of Si4+.
ABSTRACT
Hydroxyapatite is known to have excellent catalytic properties for ethanol conversion and lactic acid conversion, and their properties are influenced by the elemental composition, such as Ca/P ratio and sodium content. However, few reports have been examined for the surface acid-base nature of hydroxyapatites containing sodium ions. We prepared nanocrystalline hydroxyapatite (Ca-HAP) catalysts with various Ca/P ratios and sodium contents by the hydrothermal method. The adsorption and desorption experiments using NH3 and CO2 molecules and the catalytic reactions for 2-propenol conversion revealed that the surface acid-base natures changed continuously with the bulk Ca/P ratios. Furthermore, the new catalytic properties of hydroxyapatite were exhibited for 1,6-hexanediol conversion. The non-stoichiometric Ca-HAP(1.54) catalyst with sodium ions of 2.3 wt% and a Ca/P molar ratio of 1.54 gave a high 5-hexen-1-ol yield of 68%. In contrast, the Ca-HAP(1.72) catalyst, with a Ca/P molar ratio of 1.72, gave a high cyclopentanemethanol yield of 42%. Both yields were the highest ever reported in the relevant literature. It was shown that hydroxyapatite also has excellent catalytic properties for alkanediol conversion because the surface acid-base properties can be continuously controlled by the elemental compositions, such as bulk Ca/P ratios and sodium contents.
ABSTRACT
Eu(OH)3 with various shape-controlled morphologies and size, such as plate, rod, tube, prism and nanoparticles was successfully synthesized through simple hydrothermal reactions. The products were characterized by XRD (X-Ray Powder Diffraction), FE-SEM (Field Emission- Scanning Electron Microscopy) and TG (Thermogravimetry). The influence of the initial pH value of the starting solution and reaction temperature on the crystalline phase and morphology of the hydrothermal products was investigated. A possible formation process to control morphologies and size of europium products by changing the hydrothermal temperature and initial pH value of the starting solution was proposed.
ABSTRACT
One-pot hydrothermal preparation of Ca3Cr2Si3O12 uvarovite nanoparticles under alkaline conditions was investigated for the first time. The experimental parameters selected for the study considered the concentration of the KOH solvent solution (0.01 to 5.0 M), the agitation of the autoclave (50 rpm), and the nominal content of Si4+ (2.2-3.0 mole). Fine uvarovite particles were synthesised at 200 °C after a 3 h interval in a highly concentrated 5.0 M KOH solution. The crystallisation of single-phase Ca3Cr2Si3O12 particles proceeded free of by-products via a one-pot process involving a single-step reaction. KOH solutions below 2.5 M and water hindered the crystallisation of the Ca3Cr2Si3O12 particles. The hydrothermal treatments carried out with stirring (50 rpm) and non-stirring triggered the crystallisation of irregular anhedral particles with average sizes of 8.05 and 12.25 nm, respectively. These particles spontaneously assembled into popcorn-shaped agglomerates with sizes varying from 66 to 156 nm. All the powders prepared by the present method exhibited CIE-L*a*b* values that correspond to the Victoria green colour spectral space and have a high near infrared reflectance property. The particle size and structural crystallinity are factors affecting the Victoria pigment optical properties, such as CIE-L*a*b* values, green tonality, and near-infrared reflectance.
ABSTRACT
Simple synthetic procedures for accessing novel metal-substituted tungstosulfates [SMW11O39]4- with Keggin-type structures were developed based on the reaction of metal ions (M = Mn2+, Co2+, Ni2+, and Cu2+) with lacunary tungstosulfate, [SW11O39]6-, which was obtained by treating [SW12O40]2- with a weak base in acetone. All metal-substituted tungstosulfates were characterized by elemental analysis, X-ray crystallography, ESI-MS, IR, Raman, UV-Vis and cyclic voltammetry analyses.
ABSTRACT
Carbon nanotubes (CNTs) with excellent electron conductivity are widely used to improve the electrochemical performance of the SnO2 anode. However, the chemical bonding between SnO2 and CNTs is not clearly elucidated despite it may affect the lithiation/delithiation behavior greatly. In this work, an SnO2 @CNT composite with SnC and SnOC bonds as a linkage bridge is reported and the influence of the SnC and SnOC bonds on the lithium storage properties is revealed. It is found that the SnC bond can act as an ultrafast electron transfer path, facilitating the reversible conversion reaction between Sn and Li2 O to form SnO2 . Therefore, the SnO2 @CNT composite with more SnC bond shows high reversible capacity and nearly half capacity contributes from conversion reaction. It is opposite for the SnO2 @CNT composite with more SnOC bond that the electrons cannot be transferred directly to CNTs, resulting in depressed conversion reaction kinetics. Consequently, this work can provide new insight for exploration and design of metal oxide/carbon composite anode materials in lithium-ion battery.
ABSTRACT
Capacitive storage has been considered as one type of Li-ion storage with fast faradaic surface redox reactions to offer high power density for electrochemical applications. However, it is often limited by low extent of energy contribution during the charge/discharge process, providing insufficient influences to total capacity of Li-ion storage in electrodes. In this work, we demonstrate a pseudocapacitance predominated storage (contributes 82% of the total capacity) from an in-situ pulverization process of FeOOH rods on rGO (reduced graphene oxide) sheets for the first time. Such high extent of pseudocapacitive storage in the FeOOH/rGO electrode achieves high energy density with superior cycling performance over 200 cycles at different current densities (1135 mAh/g at 1 A/g and 783 mAh/g at 5 A/g). It is further revealed that the in-situ pulverization process is essential for the high pseudocapacitance in this electrode, because it not only produces a porous structure for high exposure of tiny FeOOH crystallites to electrolyte but also maintains stable electrochemical contact during ultrahigh rate charge transfer with high energy density in the battery. The utilization of in-situ pulverization in an Fe-based anode to realize high surface pseudocapacitance with superior performance may inspire future design of electrode structures in Li-ion batteries.
ABSTRACT
This study investigated the effects of ionic conduction of electrolytes under microwave field to facilitate hydrothermal hydrolysis of corn starch and crystalline cellulose (Avicel), typical model biomass substrates. Addition of 0.1M NaCl was effective to improve reducing sugar yield by 1.61-fold at unit energy (kJ) level. Although Avicel cellulose was highly recalcitrant to hydrothermal hydrolysis, addition of 0.1M MgCl2 improved reducing sugar yield by 6.94-fold at unit energy (kJ). Dielectric measurement of the mixture of corn starch/water/electrolyte revealed that ionic conduction of electrolytes were strongly involved in facilitating hydrothermal hydrolysis of polysaccharides.
Subject(s)
Cellulose/chemistry , Microwaves , Starch/chemistry , Water/chemistry , Zea mays/chemistry , Crystallization , Electric Conductivity , Hot Temperature , Hydrolysis , Ions , Sodium Chloride/chemistryABSTRACT
The calcite form of calcium carbonate CaCO3 undergoes a reversible phase transition between Rc and Rm at ~1240 K under a CO2 atmosphere of ~0.4 MPa. The joint probability density function obtained from the single-crystal X-ray diffraction data revealed that the oxygen triangles of the CO3 group in the high temperature form (Phase V) do not sit still at specified positions in the space group Rm, but migrate along the undulated circular orbital about carbon. The present study also shows how the room temperature form (Phase I) develops into Phase V through an intermediate form (Phase IV) in the temperature range between ~985 K and ~1240 K.
ABSTRACT
Polyoxometalate (POM) clusters were utilized as recyclable acid catalysts and microwave-absorbing agents for the microwave-assisted hydrolysis of corn starch and crystalline cellulose. Phosphotungstic (PW) and silicotungstic (SiW) acids showed high hydrolyzing activity, while phosphomolybdic acid (PMo) showed lower glucose stability. The PW catalyst could be recycled by ether extraction at least 4 times without changing its catalytic activity. The addition of PW could reduce the energy demand required for running the hydrolysis by 17-23%. The dielectric property of the aqueous PW solution was important for increasing the microwave-absorption capability of the reaction system and reducing the energy consumption.
Subject(s)
Microwaves , Polysaccharides/metabolism , Tungsten Compounds/pharmacology , Absorption , Cellulose/metabolism , Crystallization , Electric Conductivity , Heating , Hydrolysis/drug effects , Phosphotungstic Acid/pharmacology , Recycling , Solutions , Starch/metabolism , Temperature , Water/pharmacology , Zea mays/chemistryABSTRACT
The stabilities of five neutral monosaccharides (glucose, galactose, mannose, arabinose, and xylose) were kinetically compared after the molecules were submitted to microwave heating (internal heating) and induction heating (external heating) under completely identical thermal histories by employing PID (proportional, integral, and derivative) temperature controlled ovens and homogeneous mixing. By heating in water at 200°C, the rate constants for the decomposition reactions varied from 2.13×10(-4) to 3.87×10(-4)s(-1) for microwave heating; however, the values increased by 1.1- to 1.5-fold for induction heating. Similarly, in a dilute (0.8%) sulfuric acid solution, the decomposition rate constants varied from 0.61×10(-3) to 2.00×10(-3)s(-1) for microwave heating; however, the values increased by 1.5- to 2.2-fold for induction heating. The results show that microwave heating imparts greater stability to neutral monosaccharides than does induction heating. The undesirable decomposition of monosaccharides at the surface boundary of reactor walls may have increased the probability of monosaccharide decomposition during induction heating.
Subject(s)
Hot Temperature , Microwaves , Monosaccharides/chemistry , Heating , KineticsABSTRACT
Microwave irradiation was compared with induction heating for hydrothermal hydrolysis of cellobiose. Microwave heating improved glucose selectivity and resulted in a pH of the hydrolyzates that was ⩽0.57 units lower than those from conventional heating, which suggests that fewer side-reactions occurred. Halide salts of alkali and alkali earth metals improved microwave-assisted hydrothermal saccharification of cellobiose at lower reaction severity by around 0.3 of logR(0). NaCl addition of ⩾10mM reduced the required microwave output to 58.6-66.2% as compared to conventional microwave-hydrothermal hydrolysis without halide salts. Kinetic analyses revealed that the addition of salt increased the hydrolysis rate by increasing the frequency factor of the reaction. The results showed that microwave irradiation in the presence of microwave-absorbing salts is effective for hydrothermal hydrolysis of carbohydrates.
Subject(s)
Cellobiose/chemistry , Halogens/pharmacology , Microwaves , Salts/pharmacology , Temperature , Water/chemistry , Glucose/metabolism , Hydrogen-Ion Concentration , Hydrolysis/drug effectsABSTRACT
An effective adsorbent for arsenic removal was synthesized by hydrothermal treatment of waste glass powder (GP), followed by loading Fe(III) oxyhydroxide onto the surface of waste glass powder. The triple bond Si-O-H group was formed on the surface of GP and the specific surface area of GP powder was slightly increased after hydrothermal treatment. FeOOH was loaded onto the surface of hydrothermally treated waste glass powder (HGP) by the hydrolysis of FeCl3. The formation conditions of FeOOH were also investigated. The ability of this new adsorbent for arsenic (As(V)) removal was evaluated. The results indicated that the highest removal efficiency was about 97% for 1 mg/L As(V) solution at pH 6 and keeping time 2 h.
Subject(s)
Arsenic/isolation & purification , Ferric Compounds/chemistry , Glass , Adsorption , Microscopy, Electron, Scanning , X-Ray DiffractionABSTRACT
Asbestos was widely used in numerous materials and building products due to their desirable properties. It is, however, well known that asbestos inhalation causes health damage and its inexpensive decomposition technique is necessary to be developed for pollution prevention. We report here an innovative decomposition technique of friable asbestos by acidic gas (HF and HCl) generated from the decomposition of CHClF(2) by the reaction with superheated steam at 800 degrees C. Chrysotile-asbestos fibers were completely decomposed to sellaite and magnesium silicofluoride hexahydrate by the reaction with CHClF(2)-decomposed acidic gas at 150 degrees C for 30 min. At high temperatures beyond 400 degrees C, sellaite and hematite were detected in the decomposed product. In addition, crocidolite containing wastes and amosite containing wastes were decomposed at 500 degrees C and 600 degrees C for 30 min, respectively, by CHClF(2)-decomposed acidic gas. The observation of the reaction products by phase-contrast microscopy (PCM) and scanning electron microscopy (SEM) confirmed that the resulting products did not contain any asbestos.
Subject(s)
Asbestos , Hydrocarbons, Halogenated , Refuse Disposal/methods , Asbestos, Serpentine , Construction Materials , Hydrochloric Acid , Hydrofluoric AcidABSTRACT
[reaction: see text] A new method for synthesizing phenanthridine and its related compounds was developed using the condensation of o-phenylaniline and its homologues with cyclic ketones under hydrothermal conditions.