Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 7 de 7
Filter
Add more filters










Database
Language
Publication year range
1.
Opt Express ; 18(5): 4390-5, 2010 Mar 01.
Article in English | MEDLINE | ID: mdl-20389451

ABSTRACT

We present cw and mode-locked laser operations on the base of partially disordered crystalline Yb(3+):{YGd(2)}[Sc(2)](Al(2)Ga)O(12) ceramics. In continuous-wave laser operations, the average power of 2.9 W at the wavelength of 1051 nm and 2.8 W at the wavelength of 1031 nm with above 40% optical-to-optical efficiencies were achieved. In mode-locked laser operation, pulses as short as 69 fs with the average power of 820 mW was also obtained.

2.
Opt Lett ; 32(3): 247-9, 2007 Feb 01.
Article in English | MEDLINE | ID: mdl-17215934

ABSTRACT

We report a high-efficiency diode-end-pumped polycrystalline Yb:Y2O3 ceramic laser. Pumped by a 976 nm laser diode bar and with an absorbed pump power of 2.8 W, cw output power of 1.74 W at 1078 nm, and 0.73 W at 1040 nm were obtained. The slope efficiency was measured to be 82.4% for the 1078 nm laser emission and 57.1% for the 1040 nm laser emission.

3.
Opt Express ; 14(26): 12832-8, 2006 Dec 25.
Article in English | MEDLINE | ID: mdl-19532175

ABSTRACT

We report a diode-pumped passively mode-locked Yb(3+):Lu(2)O(3) ceramic laser by use of a semiconductor saturable absorber mirror. Almost transform-limited 357 fs pulses at the center wavelength of 1033.5 nm with a maximum average power of 352 mW are obtained. The efficiency against the absorbed pump power is as high as 32% by use of a laser-diode pumping and the repetition rate is 97 MHz. This is the first demonstration of a diode-pumped mode-locked Yb(3+):Lu(2)O(3) ceramic laser to our knowledge.

4.
Opt Lett ; 29(11): 1212-4, 2004 Jun 01.
Article in English | MEDLINE | ID: mdl-15209250

ABSTRACT

We report on an efficient diode-end-pumped polycrystalline Yb:Y2O3 ceramic laser. Continuous-wave output power of 4.2 W at 1078 nm was obtained under pump power of 19.5 W. The corresponding slope efficiency was 29%. The beam quality factor (M2) at full pump power was measured to be 1.63. The threshold wavelengths of the laser at various output couplings were also investigated. It was found that the threshold wavelengths shifted approximately 5 nm when the reflectivity of the output coupler changed from 90% to 99.9%, as caused by the strong reabsorption effect in the ceramic sample.

5.
Opt Express ; 12(15): 3560-6, 2004 Jul 26.
Article in English | MEDLINE | ID: mdl-19483886

ABSTRACT

We report on the experimental studies of a diode-end-pumped passively Q-switched Yb:Y(2)O(3) ceramic laser with a GaAs wafer simultaneously as saturable absorber and output coupler. The Q-switched operation of the laser has an average output power of 0.51 W with a 17.7-W incident pump power. The Q-switched pulses with pulse energy of 7.7 microJ have been achieved. The minimum pulse width is measured to be about 50 ns with a repetition rate of 52.6 KHz. To our knowledge, this is the first demonstration on a passively Q-switched Yb:Y(2)O(3) ceramic laser.

6.
Opt Express ; 11(22): 2911-6, 2003 Nov 03.
Article in English | MEDLINE | ID: mdl-19471411

ABSTRACT

A diode-pumped femtosecond ytterbium laser with a host material of Y2O3 ceramics is reported. Passive mode locking by a semiconductor saturable-absorber mirror generates 98-MHz, 615-fs pulses at a center wavelength of 1076.5 nm. The average power is 420 mW and the pulse energy is 4.3 nJ with a 2.6-W absorbed pump power. To our knowledge, this is the first continuous-wave mode-locked ceramic laser.

SELECTION OF CITATIONS
SEARCH DETAIL
...