Isolation and evaluation of probiotics from traditional Chinese foods for aflatoxin B1 detoxification: Geotrichum candidum XG1 (yeast) and mechanistic insights.

Identifying aflatoxin-detoxifying probiotics remains a significant challenge in mitigating the risks associated with aflatoxin contamination in crops. Biological detoxification is a popular technique that reduces mycotoxin hazards and garners consumer acceptance. Through multiple rounds of screening and validation tests, Geotrichum candidum XG1 demonstrated the ability to degrade aflatoxin B1 (AFB1) by 99-100%, exceeding the capabilities of mere adsorption mechanisms. Notably, the degradation efficiency was demonstrably influenced by the presence of copper and iron ions in the liquid medium, suggesting a potential role for proteases in the degradation process. Subsequent validation experiments with red pepper revealed an 83% reduction in AFB1 levels following fermentation with G. candidum XG1. Furthermore, mass spectrometry analysis confirmed the disruption of the AFB1 furan ring structure, leading to a subsequent reduction in its toxicity. Collectively, these findings establish G. candidum XG1 as a promising candidate for effective aflatoxin degradation, with potential applications within the food industry.

Description of a pathogenic strain of Aeromonas dhakensis isolated from Ancherythroculter nigrocauda in an inland region of China.

Aeromonas dhakensis is reported as an emerging pathogenic species within the genus Aeromonas and is widely distributed in tropical coastal areas. This study provided a detailed description and characterization of a strain of A. dhakensis (202108B1) isolated from diseased Ancherythroculter nigrocauda in an inland region of China. Biochemical tests identified the isolate at the genus level, and the further molecular analysis of concatenated housekeeping gene sequences revealed that the strain belonged to the species A. dhakensis. The isolated A. dhakensis strain was resistant to five antibiotics, namely, penicillin, ampicillin, clindamycin, cephalexin and imipenem, while it was susceptible or showed intermediate resistance to most of the other fifteen tested antibiotics. The isolated strain of A. dhakensis caused acute haemorrhagic septicaemia and tissue damage in artificially infected A. nigrocauda, with a median lethal dose of 7.76×104 CFU/fish. The genome size of strain 202108B1 was 5043286 bp, including one chromosome and four plasmids. This is the first detailed report of the occurrence of infection caused by an A. dhakensis strain causing infection in an aquaculture system in inland China, providing important epidemiological data on this potential pathogenic species.

Microwave biosensor for the detection of growth inhibition of human liver cancer cells at different concentrations of chemotherapeutic drug.

Cytotoxicity assays are crucial for assessing the efficacy of drugs in killing cancer cells and determining their potential therapeutic value. Measurement of the effect of drug concentration, which is an influence factor on cytotoxicity, is of great importance. This paper proposes a cytotoxicity assay using microwave sensors in an end-point approach based on the detection of the number of live cells for the first time. In contrast to optical methods like fluorescent labeling, this research uses a resonator-type microwave biosensor to evaluate the effects of drug concentrations on cytotoxicity by monitoring electrical parameter changes due to varying cell densities. Initially, the feasibility of treating cells with ultrapure water for cell counting by a microwave biosensor is confirmed. Subsequently, inhibition curves generated by both the CCK-8 method and the new microwave biosensor for various drug concentrations were compared and found to be congruent. This agreement supports the potential of microwave-based methods to quantify cell growth inhibition by drug concentrations.

E3 ubiquitin ligase RBCK1 confers ferroptosis resistance in pancreatic cancer by facilitating MFN2 degradation.

Ferroptosis, a novel form of iron-dependent non-apoptotic cell death, plays an active role in the pathogenesis of diverse diseases, including cancer. However, the mechanism through which ferroptosis is regulated in pancreatic ductal adenocarcinoma (PDAC) remains unclear. Here, our study, via combining bioinformatic analysis with experimental validation, showed that ferroptosis is inhibited in PDAC. Genome-wide sequencing further revealed that the ferroptosis activator imidazole ketone erastin (IKE) induced upregulation of the E3 ubiquitin ligase RBCK1 in PDAC cells at the transcriptional or translational level. RBCK1 depletion or knockdown rendered PDAC cells more vulnerable to IKE-induced ferroptotic death in vitro. In a mouse xenograft model, genetic depletion of RBCK1 increased the killing effects of ferroptosis inducer on PDAC cells. Mechanistically, RBCK1 interacts with and polyubiquitylates mitofusin 2 (MFN2), a key regulator of mitochondrial dynamics, to facilitate its proteasomal degradation under ferroptotic stress, leading to decreased mitochondrial reactive oxygen species (ROS) production and lipid peroxidation. These findings not only provide new insights into the defense mechanisms of PDAC cells against ferroptotic death but also indicate that targeting the RBCK1-MFN2 axis may be a promising option for treating patients with PDAC.

Improving the Rechargeable Li-CO2 Battery Performances by Tailoring Oxygen Defects on Li-Ni-Co-Mn Multi-Metal Oxide Catalysts Recycled from Spent Ternary Lithium-Ion Batteries.

Rechargeable Li-CO2 batteries are considered as a promising carbon-neutral energy storage technology owing to their ultra-high energy density and efficient CO2 capture capability. However, the sluggish CO2 reduction/evolution kinetics impedes their practical application, which leads to huge overpotentials and poor cyclability. Multi-element transit metal oxides (TMOs) are demonstrated as effective cathodic catalysts for Li-CO2 batteries. But there are no reports on the integration of defect engineering on multi-element TMOs. Herein, the oxygen vacancy-bearing Li-Ni-Co-Mn multi-oxide (Re-NCM-H3) catalyst with the α-NaFeO2-type structure is first fabricated by annealing the NiCoMn precursor that derived from spent ternary LiNi0.8Co0.1Mn0.1O2 cathode, in H2 at 300 °C. As demonstrated by experimental results and theory calculations, the introduction of moderate oxygen vacancy has optimized electronic state near the Fermi level (Ef), eventually improving CO2 adsorption and charge transfer. Therefore, the Li-CO2 batteries with Re-NCM-H3 catalyst deliver a high capacity (11808.9 mAh g-1), a lower overpotential (1.54 V), as well as excellent stability over 216 cycles at 100 mA g-1 and 165 cycles at 400 mA g-1. This study not only opens up a sustainable application of spent ternary cathode, but also validates the potential of multi-element TMO catalysts with oxygen defects for high-efficiency Li-CO2 batteries.

Biochar-derived dissolved organic matter enhanced the release of residual ciprofloxacin from the soil solid phase.

Biochar has been utilized to reduce ciprofloxacin (CIP) residues in soil. However, little is known about the effect of biochar-derived dissolved organic matter (DOM) on residual CIP transformation. Thus, we analyzed the residual soil CIP as influenced by biochar generated from rice straw (RS3 and RS6), pig manure (PM3 and PM6), and cockroach shell (CS3 and CS6) at 300 °C and 600 °C. The three-dimensional excitation-emission matrix (3D-EEM), parallel factor analysis (PARAFAC) and two-dimensional correlation spectral analysis (2D-COS) were used to describe the potential variation in the DOM-CIP interaction. Compared with CK, biochar amendment increased the water-soluble CIP content by 160.7% (RS3), 55.2% (RS6), 534.1% (PM3), 277.5% (PM6), 1160.6% (CS3) and 703.9% (CS6), indicating that the biochar feedstock controlled the soil CIP release. The content of water-soluble CIP was positively correlated with the content of dissolved organic carbon (r = 0.922, p < 0.01) and dissolved organic nitrogen (r = 0.898, p < 0.01), suggesting that the major influence of the water-soluble CIP increase was DOM. The fluorescence quenching experiment showed that the interaction between DOM and CIP triggered static quenching and the creation of a DOM complex. The mean log K of protein-like material (4.977) was higher than that of terrestrial humus-like material (3.491), suggesting that the protein-like material complexed CIP was more stable than the humus-like material. Compared with pyrolysis at 300 °C, pyrolysis at 600 °C decreased the stability of the complex of protein-like material and CIP by 0.44 (RS), 1.689 (PM) and 0.548 (CS). This result suggested that the influence of temperature change was more profound on PM biochar-derived DOM than on RS and CS. These insights are essential for understanding CIP transportation in soil and controlling CIP contamination with biochar.

Real-Time Detection of Yeast Growth on Solid Medium through Passive Microresonator Biosensor.

This study presents a biosensor fabricated based on integrated passive device (IPD) technology to measure microbial growth on solid media in real-time. Yeast (Pichia pastoris, strain GS115) is used as a model organism to demonstrate biosensor performance. The biosensor comprises an interdigital capacitor in the center with a helical inductive structure surrounding it. Additionally, 12 air bridges are added to the capacitor to increase the strength of the electric field radiated by the biosensor at the same height. Feasibility is verified by using a capacitive biosensor, and the change in capacitance values during the capacitance detection process with the growth of yeast indicates that the growth of yeast can induce changes in electrical parameters. The proposed IPD-based biosensor is used to measure yeast drop-added on a 3 mm medium for 100 h at an operating frequency of 1.84 GHz. The resonant amplitude of the biosensor varies continuously from 24 to 72 h due to the change in colony height during vertical growth of the yeast, with a maximum change of 0.21 dB. The overall measurement results also fit well with the Gompertz curve. The change in resonant amplitude between 24 and 72 h is then analyzed and reveals a linear relationship with time with a coefficient of determination of 0.9844, indicating that the biosensor is suitable for monitoring yeast growth. Thus, the proposed biosensor is proved to have potential in the field of microbial proliferation detection.

Endoplasmic reticulum targeted fluorescent probe for real-time monitoring the viscosity changes induced by calcium homeostasis disruption.

The endoplasmic reticulum (ER) acts as the major storage site for calcium ions, which are messenger ions for intracellular signaling. Disruption of calcium ion homeostasis can significantly affect the viscosity, polarity and pH of the ER. However, it is still unclear the relationship between the viscosity changes in ER and the imbalance of calcium ion homeostasis. Herein, we developed a novel fluorescent probe, named TPA, for monitoring viscosity changes that specifically targets the endoplasmic reticulum rather than mitochondria or lysosomes. TPA probe displayed good stability, as well as high responsiveness and selectivity to viscosity. The fluorescence intensity of TPA was significantly enhanced with the increased concentration or incubation time of the stimulating agents(i.e., tunicamycin), showing high responsiveness to the viscosity changes in ER. Furthermore, the TPA probe successfully demonstrated that an increase in intracellular calcium ion concentration leads to an increase in ER viscosity, whereas a decrease in calcium ion concentration leads to a decrease viscosity in ER. Both in vitro and in vivo experiments demonstrated that TPA probe successfully detected the viscosity changes in ER, especially the effects of calcium ion homeostasis disruption on ER. Overall, the TPA probe represents an efficient method for studying the relationship between calcium ion homeostasis and ER viscosity.

Impact of salt content on Douchi metabolites: biogenic amines, non-volatile compounds and volatile compounds.

BACKGROUND: The excessive salt intake associated with Douchi has become a topic of controversy. Addressing this concern and enhancing its market competitiveness necessitates the application of salt reduction fermentation in Douchi. Therefore, to promote the application of salt reduction fermentation in Douchi, a comprehensive study was undertaken aiming to investigate the differences in biogenic amines, volatile compounds and non-volatile compounds in Douchi with varying salt content. RESULTS: The findings unequivocally demonstrate that salt hampers the formation of metabolites in Douchi. As the salt content increased, there was a significant decrease (P < 0.05) in the levels of total acid, amino-type nitrogen and free amino acids in Douchi. Notably, when the salt content exceeded 80 g kg-1, there was a substantial reduction (P < 0.05) in putrescine, lactic acid and malic acid levels. Similarly, when the salt content surpassed 40 g kg-1, ß-phenethylamine and oxalic acid levels exhibited a significant decline (P < 0.05). Furthermore, the results of E-nose and principal component analysis based on headspace solid phase microextraction gas chromatography-mass spectrometry revealed notable discrepancies in the volatile compound content between Douchi samples with relatively low salt content (40 and 80 g kg-1) and those with relatively high salt content (120, 160 and 200 g kg-1) (P < 0.05). By employing partial least squares discriminant analysis, eight distinct volatile compounds, including o-xylene, benzaldehyde and 1-octen-one, were identified. These compounds exhibited higher concentrations in Douchi samples with relatively low salt content (40 and 80 g kg-1). The sensory results showed that Douchi samples with lower salt content exhibited higher scores in the soy sauce-like and Douchi aroma attributes. CONCLUSION: In conclusion, this study significantly enhances our understanding of the impact of salt on metabolites in Douchi and provides invaluable insights for the development of salt reduction fermentation in this context. © 2024 Society of Chemical Industry.

Antitumor Effect of Anti-c-Myc Aptamer-Based PROTAC for Degradation of the c-Myc Protein.

Targeting "undruggable" targets with intrinsically disordered structures is of great significance for the treatment of disease. The transcription factor c-Myc controls global gene expression and is an attractive therapeutic target for multiple types of cancers. However, due to the lack of defined ligand binding pockets, targeted c-Myc have thus far been unsuccessful. Herein, to address the dilemma of lacking ligands, an efficient and high throughput aptamer screening strategy is established, named polystyrene microwell plate-based systematic evolution of ligands by exponential enrichment (microwell-SELEX), and identify the specific aptamer (MA9C1) against c-Myc. The multifunctional aptamer-based Proteolysis Targeting Chimeras (PROTAC) for proteolysis of the c-Myc (ProMyc) is developed using the aptamer MA9C1 as the ligand. ProMyc not only significantly degrades c-Myc by the ubiquitin-proteasome system, but also reduces the Max protein, synergistically inhibiting c-Myc transcriptional activity. Combination of the artificial cyclization and anti-PD-L1 aptamer (PA1)-based delivery system, circular PA1-ProMyc chimeras achieve tumor regression in the xenograft tumor model, laying a solid foundation for the development of efficacious c-Myc degrader for the clinic. Therefore, this aptamer-based degrader provides an invaluable potential degrader in drug discovery and anti-tumor therapy, offering a promising degrader to overcome the challenge of targeting intractable targets.

Highly Sensitive and Linear Resonator-Based Biosensor for White Blood Cell Counting: Feasible Measurement Method and Intrinsic Mechanism Exploration.

Since different quantities of white blood cells (WBCs) in solution possess an adaptive osmotic pressure of cells, the WBCs themselves and in solution have similar concentrations, resulting in them having similar dielectric properties. Therefore, a microwave sensor could have difficulty in sensing the quantity variation when WBCs are in solution. This paper presents a highly sensitive, linear permittivity-inspired microwave biosensor for WBCs, counting through the evaporation method. Such a measurement method is proposed to record measurements after the cell solution is dripped onto the chip and is completely evaporated naturally. The proposed biosensor consists of an air-bridged asymmetric differential inductor and a centrally located circular fork-finger capacitor fabricated on a GaAs substrate using integrated passive fabrication technology. It is optimized to feature a larger sensitive area and improved Q-factor, which increases the effective area of interaction between cells and the electromagnetic field and facilitates the detection of their changes in number. The sensing relies on the dielectric properties of the cells and the change in the dielectric constant for different concentrations, and the change in resonance properties, which mainly represents the frequency shift, corresponds to the macroscopic change in the concentration of the cells. The microwave biosensors are used to measure biological samples with concentrations ranging from 0.25 × 106 to 8 × 106 cells per mL in a temperature (26.00 ± 0.40 °C) and humidity (54.40 ± 3.90 RH%) environment. The measurement results show a high sensitivity of 25.06 Hz/cells·mL-1 with a highly linear response of r2 = 0.99748. In addition, a mathematical modeling of individual cells in suspension is performed to estimate the dielectric constant of individual cells and further explain the working mechanism of the proposed microwave biosensor.

Controlling the Selectivity of Electrocatalytic NO Reduction through pH and Potential Regulation on Single-Atom Catalysts.

Electrocatalytic nitrogen oxide reduction (NOxRR) emerges as an effective way to bring the disrupted nitrogen cycle back into balance. However, efficient and selective NOxRR is still challenging partly due to the complex reaction mechanism, which is influenced by experimental conditions such as pH and electrode potential. Here, we have studied the enzyme-inspired iron single-atom catalysts (Fe-N4-C) and identified that the selectivity roots in the first step of the nitric oxide reduction. Combining the constrained molecular dynamics (MD) simulations with the quasi-equilibrium approximation, the effects of electrode potential and pH on the reaction free energy were considered explicitly and predicted quantitatively. Systematic heat maps for selectivity between single-N and N-N-coupled products in a wide pH-potential space are further developed, which have reproduced the experimental observations of NOxRR. The approach presented in this study allows for a realistic simulation of the electrocatalytic interfaces and a quantitative evaluation of interfacial effects. Our results in this study provide valuable and straightforward guidance for selective NOx reduction toward desired products by precisely designing the experimental conditions.

Synthesis of Metal-Nitrogen-Carbon Electrocatalysts with Atomically Regulated Nitrogen-Doped Polycyclic Aromatic Hydrocarbons.

Tuning the active site structure of metal-nitrogen-carbon electrocatalysts has recently attracted increasing interest. Herein, we report a bottom-up synthesis strategy in which atomically regulated N-doped polycyclic aromatic hydrocarbons (N-PAHs) of NxC42-x (x = 1, 2, 3, 4) were used as ligands to allow tuning of the active site's structures of M-Nx and establish correlations between the structures and electrocatalytic properties. Based on the synthesis process, detailed characterization, and DFT calculation results, active structures of Nx-Fe1-Nx in Fe1-Nx/RGO catalysts were constructed. The results demonstrated that the extra uncoordinated N atoms around the Fe1-N4 moieties disrupted the π-conjugated NxC42-x ligands, which led to more localized electronic state in the Fe1-N4 moieties and superior catalytic performance. Especially, the Fe1-N4/RGO exhibited optimized performance for ORR with E1/2 increasing by 80 mV and Jk at 0.85 V improved 18 times (compared with Fe1-N1/RGO). This synthesis strategy utilizing N-PAHs holds significant promise for enhancing the controllability of metal-nitrogen-carbon electrocatalyst preparation.

Robot-assisted anterior cruciate ligament reconstruction based on three-dimensional images.

Background Tunnel placement is a key step in anterior cruciate ligament (ACL) reconstruction. The purpose of this study was to evaluate the accuracy of bone tunnel drilling in arthroscopic ACL reconstruction assisted by a three-dimensional (3D) image-based robot system. Methods Robot-assisted ACL reconstruction was performed on twelve freshly frozen knee specimens. During the operation, three-dimensional images were used for ACL bone tunnel planning, and the robotic arm was used for navigation and drilling. Twelve patients who underwent traditional arthroscopic ACL reconstruction were included. 3D computed tomography was used to measure the actual position of the ACL bone tunnel and to evaluate the accuracy of the robotic and traditional ACL bone tunnel. Results On the femoral side, the positions of robotic and traditional surgery tunnels were 29.3 ± 1.4% and 32.1 ± 3.9% in the deep-to-shallow direction of the lateral femoral condyle (p = 0.032), and 34.6 ± 1.2% and 21.2 ± 9.4% in the high-to-low direction (p < 0.001), respectively. On the tibial side, the positions of the robotic and traditional surgical tunnels were located at 48.4 ± 0.9% and 45.8 ± 2.8% of the medial-to-lateral diameter of the tibial plateau (p = 0.008), 38.1 ± 0.8% and 34.6 ± 6.0% of the anterior-to-posterior diameter (p = 0.071), respectively. Conclusions In this study, ACL reconstruction was completed with the assistance of a robot arm and 3D images, and the robot was able to drill the bone tunnel more accurately than the traditional arthroscopic ACL reconstruction.

Molecular tuning boosts asymmetric C-C coupling for CO conversion to acetate.

Electrochemical carbon dioxide/carbon monoxide reduction reaction offers a promising route to synthesize fuels and value-added chemicals, unfortunately their activities and selectivities remain unsatisfactory. Here, we present a general surface molecular tuning strategy by modifying Cu2O with a molecular pyridine-derivative. The surface modified Cu2O nanocubes by 4-mercaptopyridine display a high Faradaic efficiency of greater than 60% in electrochemical carbon monoxide reduction reaction to acetate with a current density as large as 380 mA/cm2 in a liquid electrolyte flow cell. In-situ attenuated total reflectance surface-enhanced infrared absorption spectroscopy reveals stronger *CO signal with bridge configuration and stronger *OCCHO signal over modified Cu2O nanocubes by 4-mercaptopyridine than unmodified Cu2O nanocubes during electrochemical CO reduction. Density function theory calculations disclose that local molecular tuning can effectively regulate the electronic structure of copper catalyst, enhancing *CO and *CHO intermediates adsorption by the stabilization effect through hydrogen bonding, which can greatly promote asymmetric *CO-*CHO coupling in electrochemical carbon monoxide reduction reaction.

Formation of Supernarrow Borophene Nanoribbons.

Borophenes have sparked considerable interest owing to their fascinating physical characteristics and diverse polymorphism. However, borophene nanoribbons (BNRs) with widths less than 2 nm have not been achieved. Herein, we report the experimental realization of supernarrow BNRs. Combining scanning tunneling microscopy imaging with density functional theory modeling and ab initio molecular dynamics simulations, we demonstrate that, under the applied growth conditions, boron atoms can penetrate the outermost layer of Au(111) and form BNRs composed of a pair of zigzag (2,2) boron rows. The BNRs have a width self-contained to ∼1 nm and dipoles at the edges to keep them separated. They are embedded in the outermost Au layer and shielded on top by the evacuated Au atoms, free of the need for post-passivation. Scanning tunneling spectroscopy reveals distinct edge states, primarily attributed to the localized spin at the BNRs' zigzag edges. This work adds a new member to the boron material family and introduces a new physical feature to borophenes.

Monitoring the Mitochondrial Viscosity Changes During Cuproptosis with Iridium(III) Complex Probe via In Situ Phosphorescence Lifetime Imaging.

Cuproptosis is a novel copper-dependent form of programmed cell death, displaying important regulatory functions in many human diseases, including cancer. However, the relationship between the changes in mitochondrial viscosity, a key factor associated with cellular malfunction, and cuproptosis is still unclear. Herein, we prepared a phosphorescent iridium (Ir) complex probe for precisely monitoring the changes of mitochondrial viscosity during cuprotosis via phosphorescence lifetime imaging. The Ir complex probe possessed microsecond lifetimes (up to 1 µs), which could be easily distinguished from cellular autofluorescence to improve the imaging contrast and sensitivity. Benefiting from the long phosphorescence lifetime, excellent viscosity selectivity, and mitochondrial targeting abilities, the Ir complex probe could monitor the increase in the mitochondrial viscosity during cuproptosis (from 46.8 to 68.9 cP) in a quantitative manner. Moreover, through in situ fluorescence imaging, the Ir complex probe successfully monitored the increase in viscosity in zebrafish treated with lipopolysaccharides or elescolomol-Cu2+, which were well-known cuproptosis inducers. We anticipate that this new Ir complex probe will be a useful tool for in-depth understanding of the biological effects of mitochondrial viscosity during cuproptosis.

Surface N Sites Mediate the Formation of Li Metal Cluster@N-Enriched Hierarchically Porous Carbon for Ultrahigh-Capacity Lithium Storage.

Graphite is the popular anode material of current lithium-ion batteries (LIBs). However, its low specific capacity and poor lithium intercalation potential hinder its use for high-power and large-scale energy storage. To meet the demand for energy storage, novel anode materials with high capacity, fast chargeable capability, and long cycle life are of great interest. Herein, we demonstrate an advanced nitrogen-enriched hierarchical porous carbon serving as a lithiophilic anode material for ultrahigh capacity and long-life LIBs. NHPC-700 (under optimal synthetic conditions), featuring a high surface area, rich N-doping, high porosity, and partially graphitized nanosheet structures, is successfully fabricated from a Schiff-base copolymer via a template-incipient wetness impregnation method. NHPC-700 exhibits an ultrahigh reversible lithium storage capacity of 2796 mA h g-1 at 0.1 A g-1 while still maintaining a high capacity of 526 mA h g-1 at 10 A g-1 after 1000 cycles. Theoretical and experimental studies reveal that this remarkable Li storage performance can be attributed to the large number of N lithiophilic sites on the inner surface of the small mesoporous pores. These sites guide Li metal nucleation in the initial period and control well the volume variation during charge/discharge cycles, thus exhibiting excellent cycle stability and great potential for practical application.

Experimental study on large-scale compression members strengthened with circumferential prestressed CFRP plate.

There have been many research reports on the reinforcement of small-sized square columns with a cross-section of 200mm-300mm using prestressed carbon fiber-reinforced polymer (CFRP) materials, while there are few studies on piers in bridge and tower columns in cable-stayed bridges with a cross-section of several meters or even tens of meters. The horizontal prestressed steel tendons in the anchorage zone of tower columns in cable-stayed bridge replaced by prestressed CFRP sheets can not only facilitate construction and maintenance, but also have good fatigue resistance. The prestressed CFRP plate is used to reinforce the large-sized tower columns by using a specific device to tension the CFRP plate wrapped around the surface of the members. The tensioning device and test pedestal based on WSGG (wave-shaped-gear-grip) anchor clamping of CFRP plate have been developed in this paper, and the CFRP plate circumferential tensioning tests on the pedestal have been conducted. The test results are as follows: (1) the developed device can achieve circumferential tensioning of single-layer CFRP plate to 0.5ftk of the material, reaching a tensile force of 60kN, and generate effective restraint pressure on a 2-m long composite compression component; (2)The calculation formula for the constraint pressure generated by the circumferential prestressed CFRP sheet on the component has been derived and verified, and the maximum error between the calculated value and the experimental value is within 5%; (3) When iron sheet serves as the interface medium between CFRP plate and compression components, the prestress loss of the CFRP plate tensioned at one end is about 84% and 58%-60% when tensioned at both ends. It can be seen that the effective prestress of the CFRP plate with iron sheet as the interface medium is relatively small. Meanwhile, based on the distribution of compressive stress in the components and the effective pre tension value of CFRP plate, it can be seen that two end tensioning is better than one end tensioning; (4) The tensile stress of CFRP plate along the member is a cubic function when the tension force is 60kN, so it is deduced that the constrained compressive stress generated by CFRP plate on the member is a quadratic function distribution.

Physicochemical and functional properties of carboxymethylated insoluble dietary fiber of Lycium barbarum seed dreg.

Lycium barbarum seed dregs (LBSDs) were used for carboxymethyl modification, resulting in three degree of substitution samples (DS). Based on the substitution degree, samples were designated as low degree of substitution insoluble dietary fiber (L-IDF), medium degree of substitution insoluble dietary fiber (M-IDF) and high degree of substitution insoluble dietary fiber (H-IDF). Physicochemical and functional properties of IDFs were examined in relation to carboxymethylation degree. Infrared Fourier transform spectroscopy (FT-IR) confirmed the carboxymethyl group. According to the results, IDF, L-IDF, M-IDF, and H-IDF acquired higher enthalpy changes, and their thermal stability improved significantly. A higher DS resulted in an increase in hydration properties such as water retention capacity and water swelling capacity, as well as functional properties such as glucose adsorption capacity, nitrite ion adsorption capacity, and cholesterol adsorption capacity. As a result, carboxymethylation could effectively enhance the biological properties of L. barbarum seed dreg insoluble dietary fiber (LBSDIDF).