ABSTRACT
In this study, four new dextral camaenid from China are reported, based on shell morphology, reproductive system anatomy, and molecular phylogenetic analyses: Camaena funingensis Zhou, Wang & Lin, sp. nov., Camaena gaolongensis Zhou, Wang & Lin, sp. nov., Camaena maguanensis Zhou, Wang & Hu, sp. nov., and Camaena yulinensis Zhou, Wang & Hu, sp. nov. Detailed descriptions of the morphological characteristics including shells and genitalia, DNA sequences, and living environments of the four new species are provided, with further comparisons with congeners.
ABSTRACT
Nanopores embedded in a thin membrane with diameter below 10 nm are suitable for the biomacromolecule detection. For such purpose, in this study, we developed a technique of how to obtain small nanopores in silicon nitride films using a focused-ion-beam (FIB) system. By changing the process parameters, such as the beam current, the film thickness of the membrane and the ion beam exposure time, the diameter of the nanopore can be tuned. Under an optimized condition, high quality nanopores with diameter as low as 6 nm was fabricated on a 7 nm thick membrane. Our result suggests that FIB direct writing technique might be a suitable approach for biomacromolecule detector fabrication.
Subject(s)
DNA/analysis , Nanopores , Microscopy, Electron, TransmissionABSTRACT
Carbon nanotubes, particularly multiwall carbon nanotubes (MWCNTs) can serve as interconnects in nanoelectronic devices and integrated circuits because of their extremely large current-carrying capacity. Many experimental results about the transport properties of individual MWCNTs by contacting outer shell or all shells have been reported. In this work, a compatible method with integrated circuit manufacturing process was presented to compare the transport property of an individual multiwall carbon nanotube (MWCNT) by contacting outer shell only and all shells successively. First of the Ti/Au electrodes contacting outer shell only were fabricated onto the nanotube through the sequence of electron beam lithography (EBL) patterning, metal deposition and lift-off process. After the characterization of its transport property, focused ion beam (FIB) was used to drill holes through the same nanotube at the as-deposited electrodes. Then new contact to the holes and electrodes were made by ion-induced deposition of tungsten from W(CO)6 precursor gas. The transport results indicated that the new contact to all shells can clear up the intershell resistance and the electrical conductance of the tube can be improved about 8 times compared to that of by contacting outer shell only.