A colorimetric and fluorescent probe of lignocellulose nanofiber composite modified with Rhodamine 6G derivative for reversible, selective and sensitive detection of metal ions in wastewater.

Heavy metal ions have extremely high toxicity. As the top of food chain, human beings certainly will accumulate them by ingesting food and participating other activities, which eventually result in the damage to our health. Therefore, it is very meaningful and necessary to design a simple, portable, stable and efficient material for heavy metal ions detection. Based on the spirolactam Rhodamine 6G (SRh6G) fluorescent probe, we prepared two types of nanocomposite materials (membrane and aerogel) by vacuum filtration and freeze-drying methods with lignocellulose nanofiber (CNF) as a carrier, polyvinyl alcohol (PVA) and glutaraldehyde (GA) as the cross-linkers. Then the microstructure, chemical composition, wetting property, fluorescence intensity and selectivity of as-prepared SRh6G/PVA/CNF would be characterized and analyzed. Results showed that SRh6G/PVA/CNF nanocomposites would turn red in color under strong acidic environment and produced orange fluorescence under ultraviolet light. Besides, they were also to detect Al3+, Cu2+, Hg2+, Fe3+ and Ag+ through color and fluorescence variations. We had further tested its sensitivity, selectivity, adsorption, fluorescence limits of detection (LOD) to Fe3+ and Cu2+. The test towards real water samples (hospital wastewater, Songhua River and tap water) proved that SRh6G/PVA/CNF nanocomposites could detect the polluted water with low concentrations of Fe3+ and Cu2+. In addition, SRh6G/PVA/CNF nanocomposites have excellent mechanical property, repeatability, superhydrophilicity and underwater superoleophobicity, which may offer a theoretical reference for the assembly strategy and detection application of cellulose-based fluorescent probe.

Sustainable lignocellulose aerogel for air purifier with thermal insulation, flame retardancy, mechanical strength, and its life cycle assessment.

High-performance biomass materials with good thermal insulation, flame retardrancy, and mechanical properties are urgently required for thermal management. Herein, a novel lignocellulose aerogel treated using a recyclable deep eutectic solvent (DES) was physically mixed with tourmaline particles (TPs) to enhance its structural stability, flame retardancy, and mechanical properties. The optimized TPs-modified lignocellulose aerogel (TLA-4) had good comprehensive performances due to the synergistic effect of ammonium sulfate and TPs. Compared with TPs-free lignocellulose aerogel (LA), the total heat release (THR) and heat release rate (HRR) of TLA-4 were reduced by 62.0 % and 66.3 %, respectively, and the limiting oxygen index (LOI) of TLA-4 was drastically enhanced by 74.1 %. TLA-4 also exhibited a low thermal conductivity of 29.67 mW/mK, showing favorable thermal insulation performance. When compressed to 5 %, the mechanical strength of TLA-4 increased by 8.3 times. Meanwhile, the presence of TPs and abundant pores in the aerogel contributed to the release of negative oxygen ions (NOIs), aiding air purification. A life cycle assessment (LCA) indicated that this composite had a minimal environmental impact (EI) in 17 categories compared to other similar aerogels. The proposed strategy for preparing an environment-friendly lignocellulose aerogel offers significant potential for applications in home decoration and building materials.

Intermittent Exothermic and Self-Healing Hydrated Salt Gels for Advanced Thermal Management of Underfloor Radiant Heating System.

Phase change materials (PCMs) have great prospects in thermal management applications because they can store and release latent heat. However, they are not suitable for on-demand heating as they can only release heat once. Herein, this work reports the intermittent exothermic of PCMs based on a supersaturated salt solution, exhibiting fully controlled long-term storage of energy, releasing and suspending heat on demand. Due to the high energy barrier, it is difficult for the supersaturated salt solution to nucleate; thus, it can store energy for a long time. Contact with seeds or other foreign objects can destroy the metastable state of the supersaturated salt solution and promote the formation of crystal nuclei, enabling crystallization and heat release on demand. The release of crystallization heat can be interrupted using scissors dip in water. Additionally, self-healing behavior allows it to be recycled and last longer, due to the presence of Fe3+ , inducing strong dynamic reversible non-covalent crosslinking through metal coordination bonds. Furthermore, the hydrated salts gels are applied for thermal management of underfloor radiant heating system, demonstrating four types of intermittent exotherms sequences amazingly. Further, the intermittent exothermic hydrated salts gels provide a more user-friendly thermal management of underfloor radiant heating systems.

Progress in photocatalytic CO2 reduction based on single-atom catalysts.

Reduced CO2 emissions, conversion, and reuse are critical steps toward carbon peaking and carbon neutrality. Converting CO2 into high-value carbon-containing compounds or fuels may effectively address the energy shortage and environmental issues, which is consistent with the notion of sustainable development. Photocatalytic CO2 reduction processes have become one of the research focuses, where single-atom catalysts have demonstrated significant benefits owing to their excellent percentage of atom utilization. However, among the crucial challenges confronting contemporary research is the production of efficient, low-cost, and durable photocatalysts. In this paper, we offer a comprehensive overview of the study growth on single-atom catalysts for photocatalytic CO2 reduction reactions, describe several techniques for preparing single-atom catalysts, and discuss the advantages and disadvantages of single-atom catalysts and present the study findings of three single-atom photocatalysts with TiO2, g-C3N4 and MOFs materials as carriers based on the interaction between single atoms and carriers, and finally provide an outlook on the innovation of photocatalytic CO2 reduction reactions.

Strain-Driven Auto-Detachable Patterning of Flexible Electrodes.

Flexible electrodes that are multilayer, multimaterial, and conformal are pivotal for multifunctional wearable electronics. Traditional electronic circuits manufacturing requires substrate-supported transfer printing, which limits their multilayer integrity and device conformability on arbitrary surfaces. Herein, a "shrinkage-assisted patterning by evaporation" (SHAPE) method is reported, by employing evaporation-induced interfacial strain mismatch, to fabricate auto-detachable, freestanding, and patternable electrodes. The SHAPE method utilizes vacuum-filtration of polyaniline/bacterial cellulose (PANI/BC) ink through a masked filtration membrane to print high-resolution, patterned, and multilayer electrodes. The strong interlayer hydrogen bonding ensures robust multilayer integrity, while the controllable evaporative shrinking property of PANI/BC induces mismatch between the strains of the electrode and filtration membrane at the interface and thus autodetachment of electrodes. Notably, a 500-layer substrateless micro-supercapacitor fabricated using the SHAPE method exhibits an energy density of 350 mWh cm-2 at a power density of 40 mW cm-2 , 100 times higher than reported substrate-confined counterparts. Moreover, a digital circuit fabricated using the SHAPE method functions stably on a deformed glove, highlighting the broad wearable applications of the SHAPE method.

Synchronous removal of emulsions and organic dye over palladium nanoparticles anchored cellulose-based membrane.

Membrane is a considerable precursor for emulsions separation and organic dyes degradation used in water purification and oil reclamation. However, the tedious preparation method, the surface smears easily, and low degradation efficiency, these characteristics usually significantly hinder its applicability toward wastewater governance. Herein, a green, facile, and efficient fabrication strategy to prepare a bi-functional palladium nanoparticles (PdNPs)-loaded bacterial cellulose membrane (BCMPd) is proposed. A tri-functional bacterial cellulose membrane (BCM) was obtained by percolating bacterial cellulose (BC) on a basal membrane, and BCM served as a support, reducing agent, and stabilizer in the subsequent reduction of PdNPs. Bi-functional BCMPd was successfully obtained and used for continuously removing emulsions and reducing methylene blue (MB) from simulated wastewater via the integration of physical sieving and chemical reaction. Meanwhile, the enhancement factors for the water transfer ability and demulsification capacity correlated directly with the wettability and surface structure of BCMPd. Furthermore, the dosage of BC was adjusted to reveal the mechanism for the enhanced water transferability and demulsification capacity. Notably, PdNPs of BCMPd decreased Fermi potential difference between BH4- and MB, accelerating the electron transfer of the reduction reaction and thus exhibiting a remarkable MB degradation efficiency. Together, the information obtained in this work can be useful for comprehensively addressing the bottleneck of forming a cost-effective, eco-friendly, and bi-functional membrane reactor, providing an alternative approach for better treatment of complex wastewater.

Effect of proanthocyanidins on blood pressure: A systematic review and meta-analysis of randomized controlled trials.

BACKGROUND: Hypertension is a common chronic disease that can lead to serious health problems. Previous studies have not drawn a consistent conclusion about the effect of proanthocyanidins (PCs) on blood pressure (BP). This systematic review and meta-analysis aims to evaluate the effect of PCs supplementation on blood pressure (BP). METHODS: A comprehensive literature search was performed in 6 databases (Pubmed, Scopus, ISI Web of Science, the Cochrane Library, Embase and Google Scholar) to identify the randomized controlled trials (RCTs) that evaluated the BP-lowering effect of PCs. Subgroup and sensitivity analyses were conducted to evaluate the potential heterogeneity. Meta-regression analysis was used to evaluate dose effects of PCs on BP. RESULTS: A total of 6 studies comprising 376 subjects were included in our meta-analysis to estimate the pooled effect size. This meta-analysis suggested that PCs supplementation could significantly reduce systolic blood pressure (SBP) (WMD: -4.598 mmHg; 95 % CI: -8.037, -1.159; I2 = 33.7 %; p = 0.009), diastolic blood pressure (DBP) (WMD: -2.750 mmHg; 95 % CI: -5.087, -0.412; I2 = 0.0 %; p = 0.021) and mean arterial pressure (MAP) (WMD: -3.366 mmHg; 95 % CI: -6.719, -0.041 mmHg; I2 = 0.0 %; p = 0.049), but had no significant effect on pulse pressure (PP) (WMD: -2.131 mmHg; 95 % CI: -6.292, 2.030; I2 = 0.0 %; p = 0.315). When the studies were stratified according to the duration of the study, there was a significant reduction on SBP in the subset of the trials with <12 weeks of duration. On the contrary, there was a significant reduction on DBP in the subset of the trials with ≥12 weeks of duration. The Subgroup analysis by BMI indicated that a significant reduction on SBP for people with a higher BMI (BMI ≥ 25) and a significant reduction on DBP for people with a lower BMI (BMI < 25). Additional subgroup analysis revealed low-dose-PCs (<245 mg/day) could significantly reduce SBP, DBP and MAP. The meta-regression analyses did not indicate the dose effects of PCs on SBP, DBP, PP and MAP. CONCLUSION: Based on the current findings, PCs supplementation may be a useful treatment of hypertensive patients as well as a preventive measure in the prehypertensive and healthy subjects. However, further investigation is needed to confirm these results.

Luminescent Transparent Wood Based on Lignin-Derived Carbon Dots as a Building Material for Dual-Channel, Real-Time, and Visual Detection of Formaldehyde Gas.

Formaldehyde (FA) is a widespread indoor air pollutant, and its efficient detection is a major industrial challenge. The development of a building material with real-time and visual self-detection of FA gas is highly desirable for meeting both construction and human health demands. Herein, a luminescent transparent wood (LTW) as the building material was developed for dual-channel, real-time, and visual detection of FA gas. It was fabricated by encapsulating multicolor lignin-derived carbon dots (CDs) and poly(vinyl alcohol) (PVA) into a delignified wood framework. It exhibited 85% optical transmittance, tunable room-temperature phosphorescence (RTP), and ratiometric fluorescence (FL) emission. The tunable luminescence was attributed to different CD graphitization and surface functionalization. The color-responsive ratiometric FL and delayed RTP detections of FA were displayed over the range of 20-1500 µM (R2 = 0.966, LOD = 1.08 nM) and 20-2000 µM (R2 = 0.977, LOD = 45.8 nM), respectively. The LTW was also used as an encapsulation film on a UV-emitting InGaN chip to form white light-emitting diodes, indicating the feasibility as an FA-responsive planar light source. The operational notion of functional LTW can expand its applications to new fields such as a stimuli-responsive light-transmitting window or planar light sources while monitoring indoor air pollutants, temperature, and humidity.

A Simple, Green Method to Fabricate Composite Membranes for Effective Oil-in-Water Emulsion Separation.

Most factories discharge untreated wastewater to reduce costs, causing serious environmental problems. Low-cost, biological, environmentally friendly and highly effective materials for the separation of emulsified oil/water mixtures are thus in great demand. In this study, a simple, green method was developed for separating oil-in-water emulsions. A corn straw powder (CSP)-nylon 6,6 membrane (CSPNM) was fabricated by a phase inversion process without any further chemical modification. The CSPNM showed superhydrophilic and underwater superoleophobic properties and could be used for the separation of oil-in-water emulsion with high separation efficiency and flux. The CSPNM maintained excellent separation ability after 20 cycles of separation with an oil rejection >99.60%, and the oil rejection and flux have no obvious change with an increasing number of cycles, suggesting a good antifouling property and the structural stability of CSPNM. In addition, the CSPNM exhibited excellent thermal and chemical stability under harsh conditions of high temperature and varying pH.

Morinda officinalis How. - A comprehensive review of traditional uses, phytochemistry and pharmacology.

ETHNOPHARMACOLOGICAL RELEVANCE: The medicinal plant Morinda officinalisHow. (MO) and its root have long been used in traditional medicines in China and northeast Asia as tonics for nourishing the kidney, strengthening the bone and enhancing immunofunction in the treatment of impotence, osteoporosis, depression and inflammatory diseases such as rheumatoid arthritis and dermatitis. AIM OF THE REVIEW: This review aims to sum up updated and comprehensive information about traditional usage, phytochemistry, pharmacology and toxicology of MO and provide insights into potential opportunities for future research and development of this plant. METHODS: A bibliographic investigation was performed by analyzing the information available on MO in the internationally accepted scientific databases including Pubmed, Scopus and Web of Science, SciFinder, Google Scholar, Yahoo, Ph.D. and M.Sc. dissertations in Chinese. Information was also obtained from some local and foreign books on ethnobotany and ethnomedicines. RESULTS: The literature supported the ethnomedicinal uses of MO as recorded in China for various purposes. The ethnomedical uses of MO have been recorded in many regions of China. More than 100 chemical compounds have been isolated from this plant, and the major constituents have been found to be polysaccharides, oligosaccharides, anthraquinones and iridoid glycosides. Crude extracts and pure compounds of this plant are used as effective agents in the treatment of depression, osteoporosis, fatigue, rheumatoid arthritis, and infertility due to their anti-depressant, anti-osteoporosis, pro-fertility, anti-radiation, anti-Alzheimer disease, anti-rheumatoid, anti-fatigue, anti-aging, cardiovascularprotective, anti-oxidation, immune-regulatory, and anti-inflammatory activities. Pharmacokinetic studies have demonstrated that the main components of MO including monotropein and deacetyl asperulosidic acid are distributed in various organs and tissues. The investigation on acute toxicity and genotoxicity indicated that MO is nontoxic. There have no reports on significant adverse effect at a normal dose in clinical application, but MO at dose of more than 1000mg/kg may cause irritability, insomnia and unpleasant sensations in individual cases. CONCLUSION: MO has emerged as a good source of traditional medicines. Some uses of this plant in traditional medicines have been validated by pharmacological investigations. However, the molecular mechanism, structure-activity relationship, and potential synergistic and antagonistic effects of its multi-components such as polysaccharides, oligosaccharides, anthraquinones and iridoid glycosides need to be further elucidated, and the structural feature of polysaccharides also need to be further clarified. Sophisticated analytical technologies should be developed to comprehensively evaluate the quality of MO based on HPLC-fingerprint and content determination of the active constituents, knowing that these investigations will help further utilize this plant.

Preparation and comparison of tacrolimus-loaded solid dispersion and self-microemulsifying drug delivery system by in vitro/in vivo evaluation.

This study aimed to compare the dissolution and the intestinal absorption of tacrolimus in self-microemulsifying drug delivery system (SMEDDS) and solid dispersion (SD). Poloxamer 188 SD was prepared by the combination of the solvent evaporation method and the freeze drying method. Hydroxypropyl methylcellulose (HPMC) SD was prepared by the solvent evaporation method combined with the vacuum drying method. The formation of SD was confirmed by SEM images which showed new solid phases. The SMEDDS was composed of oil (Labrafil M1944 CS 28%), surfactant (Cremophor EL 48%) and co-surfactant (Transcutol P 24%). The self microemulsion formed by the SMEDDS upon aqueous media had spherical droplets with a hydrodynamic size of 46.0±3.2nm. The dissolution of tacrolimus from SD and SMEDDS was performed in sink and non-sink conditions with various pH. As revealed by the DSC and FT-IR, the tacrolimus was molecularly or amorphously dispersed in the SMEDDS and SD. The in vivo intestinal absorption study in rats showed that both SMEDDS and SD improved the absorption of tacrolimus over the raw tacrolimus while the SMEDDS exhibited lower absorption rate constant (Ka) and apparent permeability coefficients (Papp) than the SD. The self-prepared SD with poloxamer 188 or HPMC had comparable intestinal absorption as compared with Prograf®. The tacrolimus-loaded SMEDDS and SD would be further compared by in vivo pharmacokinetic study.

Dually Prewetted Underwater Superoleophobic and under Oil Superhydrophobic Fabric for Successive Separation of Light Oil/Water/Heavy Oil Three-Phase Mixtures.

Remediation of oil spills requires new technologies to separate light oil/water/heavy oil mixtures. Low-cost, biological, and environmentally friendly materials are needed to treat water pollution caused by oils. In this study, a corn straw powder (CSP)-coated fabric (CSPF) was fabricated by spraying waste CSP and polyurethane onto amphiphilic cotton fabric, and thus, the wettability of CSPF is enhanced by taking advantage of the hierarchical structure and increased surface roughness. Therefore, the CSPF could be dually prewetted (DCSPF) with both water and oil, and it showed underwater superoleophobic and under oil superhydrophobic properties without any further chemical modification. When applied to light oil/water/heavy oil separation, the DCSPF could be used to successively separate light oil/water/heavy oil three-phase mixtures under gravity with a high separation efficiency and flux. In addition, the DCSPF showed excellent structural and chemical stability according to repeated cycling and corrosive solution/oil separation experiments. The results of this study are of value in providing a simple, low-cost, and environment-friendly approach for application in the field of successive separation of light oil/water/heavy oil three-phase mixtures.