Slow-Release Effect Assisted Crystallization for Sequential Deposition Realizes Efficient Inverted Perovskite Solar Cells.

The two-step sequential deposition strategy has been widely recognized in promoting the research and application of perovskite solar cells, but the rapid reaction of organic salts with lead iodide inevitably affects the growth of perovskite crystals, accompanied by the generation of more defects. In this study, the regulation of crystal growth was achieved in a two-step deposition method by mixing 1-naphthylmethylammonium bromide (NMABr) with organic salts. The results show that the addition of NMABr effectively delays the aggregation and crystallization behavior of organic salts; thereby, the growth of the optimal crystal (001) orientation of perovskite is promoted. Based on this phenomenon of delaying the crystallization process of perovskite, the "slow-release effect assisted crystallization" is defined. Moreover, the incorporation of the Br element expands the band gap of perovskite and mitigates material defects as nonradiative recombination centers. Consequently, the power conversion efficiency (PCE) of the enhanced perovskite solar cells (PSCs) reaches 20.20%. It is noteworthy that the hydrophobic nature of the naphthalene moiety in NMABr can enhance the humidity resistance of PSCs, and the perovskite phase does not decompose for more than 3000 h (30-40% RH), enabling it to retain 90% of its initial efficiency even after exposure to a nitrogen environment for 1200 h.

OsALKBH9-mediated m6A demethylation regulates tapetal PCD and pollen exine accumulation in rice.

The N6-methyladenosine (m6A) mRNA modification is crucial for plant development and stress responses. In rice, the male sterility resulting from the deficiency of OsFIP37, a core component of m6A methyltransferase complex, emphasizes the significant role of m6A in male fertility. m6A is reversible and can be removed by m6A demethylases. However, whether mRNA m6A demethylase regulates male fertility in rice has remained unknown. Here, we identify the mRNA m6A demethylase OsALKBH9 and demonstrate its involvement in male fertility regulation. Knockout of OsALKBH9 causes male sterility, dependent on its m6A demethylation activity. Cytological analysis reveals defective tapetal programmed cell death (PCD) and excessive accumulation of microspores exine in Osalkbh9-1. Transcriptome analysis of anthers shows up-regulation of genes involved in tapetum development, sporopollenin synthesis, and transport pathways in Osalkbh9-1. Additionally, we demonstrate that OsALKBH9 demethylates the m6A modification in TDR and GAMYB transcripts, which affects the stability of these mRNAs and ultimately leads to excessive accumulation of pollen exine. Our findings highlight the precise control of mRNA m6A modification and reveal the pivotal roles played by OsALKBH9-mediated m6A demethylation in tapetal PCD and pollen exine accumulation in rice.

Compatible camouflage for dual-band guided-laser radar and infrared via a metamaterial perfect absorber.

Laser-guided detector and infrared detection have attracted increasing attention in a wide range of research fields, including multispectral detection, radiative cooling, and thermal management. Previously reported absorbers presented shortcomings of lacking either tunability or compatibility. In this study, a metamaterial perfect absorber based on a Helmholtz resonator and fractal structure is proposed, which realizes tunable perfect absorptivity (α 1.06µ m >0.99,α 10.6µ m >0.99) of guided-laser radar dual operating bands (1.06 µm and 10.6 µm) and a low infrared average emissivity (ε¯3-5µ m =0.03,ε¯8-14µ m =0.31) in two atmospheric windows for compatible camouflage. The proposed perfect absorber provides a dynamically tunable absorptivity without structural changes and can be applied to optical communication, military stealth or protection, and electromagnetic detection.

Optimized wideband and compact multifunctional photonic device based on Sb2S3 phase change material.

In this paper, a 1 × 2 photonic switch is designed based on a silicon-on-insulator (SOI) platform combined with the phase change material (PCM), Sb2S3, assisted by the direct binary search (DBS) algorithm. The designed photonic switch exhibits an impressive operating bandwidth ranging from 1450 to 1650 nm. The device has an insertion loss (IL) from 0.44 dB to 0.70 dB (of less than 0.7 dB) and cross talk (CT) from -26 dB to -20 dB (of less than -20 dB) over an operating bandwidth of 200 nm, especially an IL of 0.52 dB and CT of -24 dB at 1550 nm. Notably, the device is highly compact, with footprints of merely 3 × 4 µm2. Furthermore, we have extended the device's functionality for multifunctional operation in the C-band that can serve as both a 1 × 2 photonic switch and a 3 dB photonic power splitter. In the photonic switch mode, the device demonstrates an IL of 0.7 dB and a CT of -13.5 dB. In addition, when operating as a 3 dB photonic power splitter, the IL is less than 0.5 dB.

Multifunctional metalens optical tweezers for optical information recognition.

Traditional optical information recognition (OIR), particle capture and manipulation require many optical devices or mechanical moving system components to achieve a specific function, which is difficult to achieve integration. This paper proposes a new method to realize these functions by using multi-focus metalens combining spectrum and polarization selection. The design incorporates three spectral bands, namely 500 nm, 580 nm, and 660 nm, within the visible light range. Additionally, it utilizes either left-handed or right-handed circularly polarized (LCP/RCP) light, resulting in six distinct focus focusing effects on a single focal plane. By analyzing the normalized light intensity (NLI) at the corresponding focus position, the OIR of any wavelength and polarization detection in the design can be realized, and the particle capture at different focusing positions can be realized. Our work can provide a new idea for the high integration of on-chip light recognition and operation and inspire the design of a highly integrated optical system with a smaller size and more substantial function.

Species delimitation of tea plants (Camellia sect. Thea) based on super-barcodes.

BACKGROUND: The era of high throughput sequencing offers new paths to identifying species boundaries that are complementary to traditional morphology-based delimitations. De novo species delimitation using traditional or DNA super-barcodes serve as efficient approaches to recognizing putative species (molecular operational taxonomic units, MOTUs). Tea plants (Camellia sect. Thea) form a group of morphologically similar species with significant economic value, providing the raw material for tea, which is the most popular nonalcoholic caffeine-containing beverage in the world. Taxonomic challenges have arisen from vague species boundaries in this group. RESULTS: Based on the most comprehensive sampling of C. sect. Thea by far (165 individuals of 39 morphospecies), we applied three de novo species delimitation methods (ASAP, PTP, and mPTP) using plastome data to provide an independent evaluation of morphology-based species boundaries in tea plants. Comparing MOTU partitions with morphospecies, we particularly tested the congruence of MOTUs resulting from different methods. We recognized 28 consensus MOTUs within C. sect. Thea, while tentatively suggesting that 11 morphospecies be discarded. Ten of the 28 consensus MOTUs were uncovered as morphospecies complexes in need of further study integrating other evidence. Our results also showed a strong imbalance among the analyzed MOTUs in terms of the number of molecular diagnostic characters. CONCLUSION: This study serves as a solid step forward for recognizing the underlying species boundaries of tea plants, providing a needed evidence-based framework for the utilization and conservation of this economically important plant group.

Macrophages suppress cardiac reprogramming of fibroblasts in vivo via IFN-mediated intercellular self-stimulating circuit.

Direct conversion of cardiac fibroblasts (CFs) to cardiomyocytes (CMs) in vivo to regenerate heart tissue is an attractive approach. After myocardial infarction (MI), heart repair proceeds with an inflammation stage initiated by monocytes infiltration of the infarct zone establishing an immune microenvironment. However, whether and how the MI microenvironment influences the reprogramming of CFs remains unclear. Here, we found that in comparison with cardiac fibroblasts (CFs) cultured in vitro, CFs that transplanted into infarct region of MI mouse models resisted to cardiac reprogramming. RNA-seq analysis revealed upregulation of interferon (IFN) response genes in transplanted CFs, and subsequent inhibition of the IFN receptors increased reprogramming efficiency in vivo. Macrophage-secreted IFN-ß was identified as the dominant upstream signaling factor after MI. CFs treated with macrophage-conditioned medium containing IFN-ß displayed reduced reprogramming efficiency, while macrophage depletion or blocking the IFN signaling pathway after MI increased reprogramming efficiency in vivo. Co-IP, BiFC and Cut-tag assays showed that phosphorylated STAT1 downstream of IFN signaling in CFs could interact with the reprogramming factor GATA4 and inhibit the GATA4 chromatin occupancy in cardiac genes. Furthermore, upregulation of IFN-IFNAR-p-STAT1 signaling could stimulate CFs secretion of CCL2/7/12 chemokines, subsequently recruiting IFN-ß-secreting macrophages. Together, these immune cells further activate STAT1 phosphorylation, enhancing CCL2/7/12 secretion and immune cell recruitment, ultimately forming a self-reinforcing positive feedback loop between CFs and macrophages via IFN-IFNAR-p-STAT1 that inhibits cardiac reprogramming in vivo. Cumulatively, our findings uncover an intercellular self-stimulating inflammatory circuit as a microenvironmental molecular barrier of in situ cardiac reprogramming that needs to be overcome for regenerative medicine applications.

Morphological Innovation Drives Sperm Release in Bryophytes.

Plant movements for survival are nontrivial. Antheridia in the moss Physcomitrium patens (P. patens) use motion to eject sperm in the presence of water. However, the biological and mechanical mechanisms that actuate the process are unknown. Here, the burst of the antheridium of P. patens, triggered by water, results from elastic instability and is determined by an asymmetric change in cell geometry. The tension generated in jacket cell walls of antheridium arises from turgor pressure, and is further promoted when the inner walls of apex burst in hydration, causing water and cellular contents of apex quickly influx into sperm chamber. The outer walls of the jacket cells are strengthened by NAC transcription factor VNS4 and serve as key morphomechanical innovations to store hydrostatic energy in a confined space in P. patens. However, the antheridium in liverwort Marchantia polymorpha (M. polymorpha) adopts a different strategy for sperm release; like jacket cell outer walls of P. patens, the cells surrounding the antheridium of M. polymorpha appear to play a similar role in the storage of energy. Collectively, the work shows that plants have evolved different ingenious devices for sperm discharge and that morphological innovations can differ.

Soil Cd increased the leaf litter Cd remains of Solanum nigrum and Solanum lycopersicum.

Plant litter decomposition is a natural pathway of heavy metal cycling in soil ecosystems, but the dynamics of heavy metal release during litter decomposition are relatively poorly understood. The purpose of this study was to investigate the effects of species, soil fauna and soil Cd addition on litter decomposition and Cd release dynamics. Therefore, we selected two plants, Solanum nigrum and S. lycopersicum with large differences in Cd accumulation capacity. First, they were enriched with Cd during the growing period and leaf litter was harvested after 6 months of pretreatment. Then, the decomposition of leaf litter was conducted with or without soil Cd and Eisenia fetida through lab pot tests. Our results showed that leaf litter Cd led to a significant decrease in litter decomposition rate (K value), with a maximum decrease of 32.1% in S. nigrum and 30.1% in S. lycopersicum. We observed that the presence of E. fetida significantly increased K value, but the effect was similar in the +leaf Cd treatment and the -leaf Cd treatment, both for S. nigrum and S. lycopersicum. Interestingly, the litter Cd concentration did not decrease during decomposition, but showed an increasing trend, especially for S. nigrum in the +soil Cd treatment. Moreover, the litter Cd remains was higher in the +soil Cd treatment compared to the -soil Cd treatment for both S. nigrum and S. lycopersicum, no matter whether with or without E. fetida. This result suggests that the Cd may be transferred from soil to litter, thus increasing the litter Cd remains. Overall, our study shows that leaf litter Cd slowed down the carbon cycling in ecosystems. In addition, the release of litter Cd has a lag, and the litter has a certain adsorption capacity for soil Cd, which intensifies the harm to the ecology during litter transfer.

The complete mitochondrial genome of Sarcophaga angarosinica (Diptera: Sarcophagidae).

Sarcophaga (Liosarcophaga) angarosinica (Rohdendorf, 1937) (Diptera: Sarcophagidae) is a species of both medical and ecological significance. In this study, the complete mitochondrial genome (mitogenome) of S. angarosinica was sequenced and characterized. The mitogenome has a total length of 15,215 bp, including 13 protein-coding genes, two ribosomal RNAs, 22 transfer RNAs, and an adenine and thymine-rich region. This mitogenome comprises 39.5% adenine, 9.4% guanine, 14.4% cytosine, and 36.8% thymine. Phylogenetic analysis revealed that S. angarosinica is closely related to Sarcophaga similis. This study enriches the genetic data on S. angarosinica and will contribute to establishing the phylogenetic relationships among flesh flies.

Atomically Dispersed Dual-Metal ORR Catalyst with Hierarchical Porous Structure for Zn-Air Batteries.

The metal-nitrogen-carbon (M-N-C)-based catalysts are promising to replace PGM (platinum group metal) to accelerate oxygen reduction reaction due to their excellent electrocatalytic performance. However, the inferior intrinsic activity and poor active site density confining further improvement in their performance. Modulating the electronic structure and reasonably designing the pore structure are widely acknowledged effective strategies to boost the activity of the M-N-C catalysts. However, it is a great challenge to form abundant pores to regulate the electronic structure via the facile method. Herein, a hierarchical, porous dual-atom catalyst FeNi-NPC-1000 has been architectured by the Na2CO3 template method and bimetallic doping modification strategy. Benefitting from the optimized pore and electronic structure, the as-prepared FeNi-NPC-1000 possesses a high specific surface area (1412.8 m2 g-1) and improved ORR activity (E1/2 = 0.877 V vs RHE), which is superior to that of Pt/C (E1/2 = 0.867 V vs RHE). With the evidence of AC-STEM, XAS, and DFT, the FeNi-N8-C moiety is proven to be the key active site to realize high-efficiency ORR catalysis. When assembled it as an air cathode of ZABs, FeNi-NPC-1000 displays superior discharge performance (Pmax = 367.1 mW cm-2) and a stable battery long-life. This article will provide a new strategy for designing dual-metal atomic catalysts applied in metal-air batteries.

Young evolutionary origins of dioecy in the genus Asparagus.

PREMISE: Dioecy (separate sexes) has independently evolved numerous times across the angiosperm phylogeny and is recently derived in many lineages. However, our understanding is limited regarding the evolutionary mechanisms that drive the origins of dioecy in plants. The recent and repeated evolution of dioecy across angiosperms offers an opportunity to make strong inferences about the ecological, developmental, and molecular factors influencing the evolution of dioecy, and thus sex chromosomes. The genus Asparagus (Asparagaceae) is an emerging model taxon for studying dioecy and sex chromosome evolution, yet estimates for the age and origin of dioecy in the genus are lacking. METHODS: We use plastome sequences and fossil time calibrations in phylogenetic analyses to investigate the age and origin of dioecy in the genus Asparagus. We also review the diversity of sexual systems present across the genus to address contradicting reports in the literature. RESULTS: We estimate that dioecy evolved once or twice approximately 2.78-3.78 million years ago in Asparagus, of which roughly 27% of the species are dioecious and the remaining are hermaphroditic with monoclinous flowers. CONCLUSIONS: Our findings support previous work implicating a young age and the possibility of two origins of dioecy in Asparagus, which appear to be associated with rapid radiations and range expansion out of Africa. Lastly, we speculate that paleoclimatic oscillations throughout northern Africa may have helped set the stage for the origin(s) of dioecy in Asparagus approximately 2.78-3.78 million years ago.

Coexistence of Ferroelectricity and Ferromagnetism in Atomically Thin Two-Dimensional Cr2S3/WS2 Vertical Heterostructures.

Two-dimensional (2D) heterostructures with ferromagnetism and ferroelectricity provide a promising avenue to miniaturize the device size, increase computational power, and reduce energy consumption. However, the direct synthesis of such eye-catching heterostructures has yet to be realized up to now. Here, we design a two-step chemical vapor deposition strategy to growth of Cr2S3/WS2 vertical heterostructures with atomically sharp and clean interfaces on sapphire. The interlayer charge transfer and periodic moiré superlattice result in the emergence of room-temperature ferroelectricity in atomically thin Cr2S3/WS2 vertical heterostructures. In parallel, long-range ferromagnetic order is discovered in 2D Cr2S3 via the magneto-optical Kerr effect technique with the Curie temperature approaching 170 K. The charge distribution variation induced by the moiré superlattice changes the ferromagnetic coupling strength and enhances the Curie temperature. The coexistence of ferroelectricity and ferromagnetism in 2D Cr2S3/WS2 vertical heterostructures provides a cornerstone for the further design of logic-in-memory devices to build new computing architectures.

Multifunctional emitter based on inverse design for infrared stealth, thermal imaging and radiative cooling.

In contrast to conventional emitters fashioned from traditional materials, tunable thermal emitters exhibit a distinct propensity to fulfill the demands of diverse scenarios, thereby engendering an array of prospects within the realms of communications, military applications, and control systems. In this paper, a tunable thermal emitter without continuous external excitation is introduced using Ge2Sb2Te5 (GST) and high-temperature-resistant material Mo. It is automatically optimized by inverse design with genetic algorithm (GA) to switch between different functions according to the object temperature to adapt to diverse scenarios. In "off" mode, the emitter orchestrates a blend of infrared (IR) stealth and thermal management. This is evidenced by average absorptivity values of 0.08 for mid-wave infrared (MIR, 3-5 µm), 0.19 for long-wave infrared (LIR, 8-14 µm), and 0.68 for the non-atmospheric window (NAW, 5-8 µm). Conversely, when confronted with high-temperature entities, the emitter seamlessly transitions to "on" mode, instigating a process of radiative cooling. This transformation is reflected in the augmented emissivity of the dual-band atmospheric window including MIR and LIR, attaining peak values of 0.96 and 0.97. This transition yields a cooling potential, quantified at 64 W/m2 at the ambient temperature of 25°C. In addition, our design employs a layered structure, which avoids complex patterned resonators and facilitates large-area fabrication. The emitter in this paper evinces robust insensitivity to polarization variations and the angle of incidence. We believe that this work will contribute to the development in the fields of dynamic tunability for IR stealth, dynamic radiative cooling systems, and thermal imaging.

C2-methyladenosine in tRNA promotes protein translation by facilitating the decoding of tandem m2A-tRNA-dependent codons.

RNA modification C2-methyladenosine (m2A) exists in both rRNA and tRNA of Escherichia coli (E. coli), installed by the methyltransferase RlmN using a radical-S-adenosylmethionine (SAM) mechanism. However, the precise function of m2A in tRNA and its ubiquity in plants have remained unclear. Here we discover the presence of m2A in chloroplast rRNA and tRNA, as well as cytosolic tRNA, in multiple plant species. We identify six m2A-modified chloroplast tRNAs and two m2A-modified cytosolic tRNAs across different plants. Furthermore, we characterize three Arabidopsis m2A methyltransferases-RLMNL1, RLMNL2, and RLMNL3-which methylate chloroplast rRNA, chloroplast tRNA, and cytosolic tRNA, respectively. Our findings demonstrate that m2A37 promotes a relaxed conformation of tRNA, enhancing translation efficiency in chloroplast and cytosol by facilitating decoding of tandem m2A-tRNA-dependent codons. This study provides insights into the molecular function and biological significance of m2A, uncovering a layer of translation regulation in plants.

Nuclear phylogenomics of Asteraceae with increased sampling provides new insights into convergent morphological and molecular evolution.

Convergent morphological evolution is widespread in flowering plants, and understanding this phenomenon relies on well-resolved phylogenies. Nuclear phylogenetic reconstruction using transcriptome datasets has been successful in various angiosperm groups, but it is limited to taxa with available fresh materials. Asteraceae, which are one of the two largest angiosperm families and are important for both ecosystems and human livelihood, show multiple examples of convergent evolution. Nuclear Asteraceae phylogenies have resolved relationships among most subfamilies and many tribes, but many phylogenetic and evolutionary questions regarding subtribes and genera remain, owing to limited sampling. Here, we increased the sampling for Asteraceae phylogenetic reconstruction using transcriptomes and genome-skimming datasets and produced nuclear phylogenetic trees with 706 species representing two-thirds of recognized subtribes. Ancestral character reconstruction supports multiple convergent evolutionary events in Asteraceae, with gains and losses of bilateral floral symmetry correlated with diversification of some subfamilies and smaller groups, respectively. Presence of the calyx-related pappus may have been especially important for the success of some subtribes and genera. Molecular evolutionary analyses support the likely contribution of duplications of MADS-box and TCP floral regulatory genes to innovations in floral morphology, including capitulum inflorescences and bilaterally symmetric flowers, potentially promoting the diversification of Asteraceae. Subsequent divergences and reductions in CYC2 gene expression are related to the gain and loss of zygomorphic flowers. This phylogenomic work with greater taxon sampling through inclusion of genome-skimming datasets reveals the feasibility of expanded evolutionary analyses using DNA samples for understanding convergent evolution.

Robust multiferroic in interfacial modulation synthesized wafer-scale one-unit-cell of chromium sulfide.

Multiferroic materials offer a promising avenue for manipulating digital information by leveraging the cross-coupling between ferroelectric and ferromagnetic orders. Despite the ferroelectricity has been uncovered by ion displacement or interlayer-sliding, one-unit-cell of multiferroic materials design and wafer-scale synthesis have yet to be realized. Here we develope an interface modulated strategy to grow 1-inch one-unit-cell of non-layered chromium sulfide with unidirectional orientation on industry-compatible c-plane sapphire. The interfacial interaction between chromium sulfide and substrate induces the intralayer-sliding of self-intercalated chromium atoms and breaks the space reversal symmetry. As a result, robust room-temperature ferroelectricity (retaining more than one month) emerges in one-unit-cell of chromium sulfide with ultrahigh remanent polarization. Besides, long-range ferromagnetic order is discovered with the Curie temperature approaching 200 K, almost two times higher than that of bulk counterpart. In parallel, the magnetoelectric coupling is certified and which makes 1-inch one-unit-cell of chromium sulfide the largest and thinnest multiferroics.

Broadband Achromatic Imaging of a Metalens with Optoelectronic Computing Fusion.

The remarkable ultrathin ability of metalenses gives them potential as a next-generation imaging candidate. However, the inherent chromatic aberration of metalenses restricts their widespread application. We present an achromatic metalens with optoelectronic computing fusion (OCF) to mitigate the impact of chromatic aberration and simultaneously avoid the significant challenges of nanodesign, nanofabrication, and mass production of metalenses, a method different from previous methods. Leveraging the nonlinear fitting, we demonstrate that OCF can effectively learn the chromatic aberration mapping of metalens and thus restore the chromatic aberration. In terms of the peak signal-to-noise ratio index, there is a maximum improvement of 12 dB, and ∼8 ms is needed to correct the chromatic aberration. Furthermore, the edge extraction of images and super-resolution reconstruction that effectively enhances resolution by a factor of 4 are also demonstrated with OCF. These results offer the possibility of applications of metalenses in mobile cameras, virtual reality, etc.

Tensor completion algorithm-aided structural color design.

In recent years, structural color has developed rapidly due to its distinct advantages, such as low loss, high spatial resolution and environmental friendliness. Various inverse design methods have been extensively investigated to efficiently design optical structures. However, the optimization method for the inverse design of structural color remains a formidable challenge. Traditional optimization approaches, such as genetic algorithms require time-consuming repetitions of structural simulations. Deep learning-assisted design necessitates prior simulations and large amounts of data, making it less efficient for systems with a small number of features. This study proposes a tensor completion algorithm capable of swiftly and accurately predicting missing datasets based on partially obtained datasets to assist in structural color design. Transforming the complex physical problem of structural color design into a spatial structure relationship problem linking geometric parameters and spectral data. The method utilizes tensor multilinear data analysis to effectively capture the complex relationships associated with geometric parameters and spectral data in higher-order data. Numerical and experimental results demonstrate that the algorithm exhibits high reliability in terms of speed and accuracy for diverse structures, datasets of varying sizes, and different materials, significantly enhancing design efficiency. The proposed algorithm offers a viable solution for inverse design problems involving complex physical systems, thereby introducing a novel approach to the design of photonic devices. Additionally, numerical experiments illustrate that the structural color of cruciform resonators with diamond can overcome the high loss issues observed in traditional dielectric materials within the blue wavelength region and enhance the corrosion resistance of the structure. We achieve a wide color gamut and a high-narrow reflection spectrum nearing 1 by this structure, and the theoretical analysis further verifies that diamond holds great promise in the realm of optics.

Analog signal metasurface processor supporting mathematical operator reconfiguration.

Electromagnetic wave analog computing is an effective method to overcome the bottleneck of electronic computing, which has attracted the attention of scientists. However, many spatial analog signal processing systems based on electromagnetic waves can only execute one unique mathematical operator and cannot provide multiple operators for users to choose arbitrarily. In order to enhance the function of the current spatial analog computing system, we design a coding structure with amplitude-phase decoupling modulation to realize the analog signal processor that supports the switching of mathematical operators and demonstrate the precise switching from the first-order spatial differential operator to the first-order spatial integral operator. Our design idea can be used as a paradigm for designing small reconfigurable analog computing systems, paving the way for the construction of high-speed, multifunctional, and universal signal processing systems. This idea can be extended to any other range of waves.