Polymeric integration of structure-switching aptamers on transistors for histamine sensing.

Aptamers that undergo large conformational rearrangements at the surface of electrolyte-gated field-effect transistor (EG-FETs)-based biosensors can overcome the Debye length limitation in physiological high ionic strength environments. For the sensitive detection of small molecules, carbon nanotubes (CNTs) that approach the dimensions of analytes of interest are promising channel materials for EG-FETs. However, functionalization of CNTs with bioreceptors using frequently reported surface modification strategies (e.g., π-π stacking), requires highly pristine CNTs deposited through methods that are incompatible with low-cost fabrication methods and flexible substrates. In this work, we explore alternative non-covalent surface chemistry to functionalize CNTs with aptamers. We harnessed the adhesive properties of poly-D-lysine (PDL), to coat the surface of CNTs and then grafted histamine-specific DNA aptamers electrostatically in close proximity to the CNT semiconducting channel. The layer-by-layer assembly was monitored by complementary techniques such as X-ray photoelectron spectroscopy, optical waveguide lightmode spectroscopy, and fluorescence microscopy. Surface characterization confirmed histamine aptamer integration into PDL-coated CNTs and revealed ∼5-fold higher aptamer surface coverage when using CNT networks with high surface areas. Specific aptamers assembled on EG-CNTFETs enabled histamine detection in undiluted high ionic strength solutions in the concentration range of 10 nM to 100 µM. Sequence specificity was demonstrated via parallel measurements with control EG-CNTFETs functionalized with scrambled DNA. Histamine aptamer-modified EG-CNTFETs showed high selectivity vs. histidine, the closest structural analog and precursor to histamine. Taken together, these results implied that target-specific aptamer conformational changes on CNTs facilitate signal transduction, which was corroborated by circular dichroism spectroscopy. Our work suggests that layer-by-layer polymer chemistry enables integration of structure-switching aptamers into flexible EG-CNTFETs for small-molecule biosensing.

Wearable aptamer-field-effect transistor sensing system for noninvasive cortisol monitoring.

Wearable technologies for personalized monitoring require sensors that track biomarkers often present at low levels. Cortisol­a key stress biomarker­is present in sweat at low nanomolar concentrations. Previous wearable sensing systems are limited to analytes in the micromolar-millimolar ranges. To overcome this and other limitations, we developed a flexible field-effect transistor (FET) biosensor array that exploits a previously unreported cortisol aptamer coupled to nanometer-thin-film In2O3 FETs. Cortisol levels were determined via molecular recognition by aptamers where binding was transduced to electrical signals on FETs. The physiological relevance of cortisol as a stress biomarker was demonstrated by tracking salivary cortisol levels in participants in a Trier Social Stress Test and establishing correlations between cortisol in diurnal saliva and sweat samples. These correlations motivated the development and on-body validation of an aptamer-FET array­based smartwatch equipped with a custom, multichannel, self-referencing, and autonomous source measurement unit enabling seamless, real-time cortisol sweat sensing.

Novel ssDNA aptamer-based fluorescence sensor for perfluorooctanoic acid detection in water.

Per- and polyfluoroalkyl substances (PFAS) are widely detected environmental contaminants, and there is a great need for development of sensor technologies for rapid and continuous monitoring of PFAS. In this study, we have developed fluorescence based aptasensor that can possibly monitor perfluorooctanoic acid (PFOA) in water with limit of detection (LOD) of 0.17 µM. This is first to report the successful isolation of PFAS binding ssDNA aptamers. The obtained aptamer selectively binds PFOA with dissociation constant (KD) of 5.5 µM. Specific aptamer binding sites to PFOA were identified and the length of the fluorinated carbons was a key binding factor rather than the functional group. The aptamer binding to structurally similar PFAS compounds (i.e., perfluorocarboxylic acids and perfluorosulfonic acids with 4-8 carbon chains) was also investigated; the aptamer KD values were 6.5 and 3.3 µM for perfluoroheptanoic acid and perfluorohexanesulfonic acid, respectively, while other analogs did not bind to the aptamer. The presence of major inorganic ions and dissolved organic matter had negligible influences on the aptamer performance (<14% at a 10 mM concentration), and the aptamer performance was also robust in real wastewater effluent conditions, with a KD of 7.4 µM for PFOA. Fluorescence-based aptasensor developed in this study is adequate in monitoring PFOA levels in water contaminated with the accident spills and heavy usage of fire-fighting foams near the industrial sites and military bases. More importantly, the study opens up new capability of aptasensors to efficiently monitor the trace amount of various PFAS compounds and other fluorinated alternatives in natural and engineered water environments.

Development of novel fluorescence-based and label-free noncanonical G4-quadruplex-like DNA biosensor for facile, specific, and ultrasensitive detection of fipronil.

Fipronil is a broad-spectrum insecticide widely used in agriculture and residential areas; its indiscriminate use leads to environmental pollution and poses health hazards. Early detection of fipronil is critical to prevent the deleterious effects. However, current insecticide analysis methods such as HPLC, LC/MS, and GC/MS are incompetent; they are costly, immobile, time-consuming, laborious, and need skilled technicians. Hence, a sensitive, specific, and cheap biosensor are essential to containing the contamination. Here, we designed two novel biosensors-the first design relied on fluorescent labeling/quenching, while the second sensor focused on label-free detection using Thioflavin T displacement. Altogether, we identified four candidate aptamers, predicted secondary structures, and performed 3D molecular modeling to predict the binding pocket of fipronil in FiPA6B aptamer. Furthermore, the aptameric sensors showed high sensitivity to fipronil of sub-ppb level LOD, attributed to stringent experimental design. The biosensors displayed high specificity against other phenylpyrazole insecticides and demonstrated robust sensitivity for fipronil in real samples like cabbage and cucumber. Notably, to the best of our knowledge, this is the first demonstration of noncanonical G4-quadruplex-like aptamer binding to fipronil, verified using CD spectroscopy. Such aptasensors possess considerable potential for real-time measurements of hazardous insecticides as point-of-care technology.

Structure-switching aptamer sensors for the specific detection of piperaquine and mefloquine.

Tracking antimalarial drug use and efficacy is essential for monitoring the current spread of antimalarial drug resistance. However, available methods for determining tablet quality and patient drug use are often inaccessible, requiring well-equipped laboratories capable of performing liquid chromatography-mass spectrometry (LC-MS). Here, we report the development of aptamer-based fluorescent sensors for the rapid, specific detection of the antimalarial compounds piperaquine and mefloquine-two slow-clearing partner drugs in current first-line artemisinin-based combination therapies (ACTs). Highly selective DNA aptamers were identified that bind piperaquine and mefloquine with dissociation constants (K d's) measured in the low nanomolar range via two independent methods. The aptamers were isolated from a library of single-stranded DNA molecules using a capture-systematic evolution of ligands by exponential enrichment (SELEX) technique and then adapted into structure-switching aptamer fluorescent sensors. Sensor performance was optimized for the detection of drug from human serum and crushed tablets, resulting in two sensing platforms. The patient sample platform was validated against an LC-MS standard drug detection method in samples from healthy volunteers and patients with malaria. This assay provides a rapid and inexpensive method for tracking antimalarial drug use and quality for the containment and study of parasite resistance, a major priority for malaria elimination campaigns. This sensor platform allows for flexibility of sample matrix and can be easily adapted to detect other small-molecule drugs.

Divalent Cation Dependence Enhances Dopamine Aptamer Biosensing.

Oligonucleotide receptors (aptamers), which change conformation upon target recognition, enable electronic biosensing under high ionic-strength conditions when coupled to field-effect transistors (FETs). Because highly negatively charged aptamer backbones are influenced by ion content and concentration, biosensor performance and target sensitivities were evaluated under application conditions. For a recently identified dopamine aptamer, physiological concentrations of Mg2+ and Ca2+ in artificial cerebrospinal fluid produced marked potentiation of dopamine FET-sensor responses. By comparison, divalent cation-associated signal amplification was not observed for FET sensors functionalized with a recently identified serotonin aptamer or a previously reported dopamine aptamer. Circular dichroism spectroscopy revealed Mg2+- and Ca2+-induced changes in target-associated secondary structure for the new dopamine aptamer, but not the serotonin aptamer nor the old dopamine aptamer. Thioflavin T displacement corroborated the Mg2+ dependence of the new dopamine aptamer for target detection. These findings imply allosteric binding interactions between divalent cations and dopamine for the new dopamine aptamer. Developing and testing sensors in ionic environments that reflect intended applications are best practices for identifying aptamer candidates with favorable attributes and elucidating sensing mechanisms.

Hydrogel Microfilaments toward Intradermal Health Monitoring.

Digital health promises a paradigm shift for medicine where biomarkers in individuals are continuously monitored to improve diagnosis and treatment of disease. To that end, a technology for minimally invasive quantification of endogenous analytes in bodily fluids will be required. Here, we describe a strategy for designing and fabricating hydrogel microfilaments that can penetrate the skin while allowing for optical fluorescence sensing. The polyacrylamide formulation was selected to provide high elastic modulus in the dehydrated state and optical transparency in the hydrated state. The microfilaments can be covalently tethered to a fluorescent aptamer to enable functional sensing. The microfilament array can penetrate the skin with low pain and without breaking, contact the dermal interstitial fluid, and be easily removed from the skin. In the future, hydrogel microfilaments could be integrated with a wearable fluorometer to serve as a platform for continuous, minimally invasive monitoring of intradermal biomarkers.

Phenylalanine Monitoring via Aptamer-Field-Effect Transistor Sensors.

Determination of the amino acid phenylalanine is important for lifelong disease management in patients with phenylketonuria, a genetic disorder in which phenylalanine accumulates and persists at levels that alter brain development and cause permanent neurological damage and cognitive dysfunction. Recent approaches for treating phenylketonuria focus on injectable medications that efficiently break down phenylalanine but sometimes result in detrimentally low phenylalanine levels. We have identified new DNA aptamers for phenylalanine in two formats, initially as fluorescent sensors and then, incorporated with field-effect transistors (FETs). Aptamer-FET sensors detected phenylalanine over a wide range of concentrations (fM to mM). para-Chlorophenylalanine, which inhibits the enzyme that converts phenylalanine to tyrosine, was used to induce hyperphenylalaninemia during brain development in mice. Aptamer-FET sensors were specific for phenylalanine versus para-chlorophenylalanine and differentiated changes in mouse serum phenylalanine at levels expected in patients. Aptamer-FETs can be used to investigate models of hyperphenylalanemia in the presence of structurally related enzyme inhibitors, as well as naturally occurring amino acids. Nucleic acid-based receptors that discriminate phenylalanine analogs, some that differ by a single substituent, indicate a refined ability to identify aptamers with binding pockets tailored for high affinity and specificity. Aptamers of this type integrated into FETs enable rapid, electronic, label-free phenylalanine sensing.

Microcompartments for Protection and Isolation of Nanoscale DNA Computing Elements.

Physical isolation of molecular computing elements holds the potential for increasing system complexity by enabling the reuse of standardized components and by protecting the components from environmental degradation. However, once elements have been compartmentalized, methods for communicating into these compartments are needed. We report the compartmentalization of steroid-responsive DNA aptamers within giant unilamellar vesicles (GUVs) that are permeable to steroid inputs. Monodisperse GUVs are loaded with aptamers using a microfluidic platform. We demonstrate the target-specific activation of individual aptamers within the GUVs and then load two noninterfering aptamers into the same GUV and demonstrate specific responses to all possible combinations of the two input steroids. Crucially, GUVs prevent the degradation of DNA components by nucleases, providing a potential mechanism for deploying nucleic acid components in vivo. Importantly, our compartments also prevent nonspecific cross-talk between complementary strands, thereby providing a method for parallel execution of cross-reacting molecular logic components. Thus, we provide a mechanism for spatially organizing molecular computing elements, which will increase system modularity by allowing standardized components to be reused.

Aptamer-field-effect transistors overcome Debye length limitations for small-molecule sensing.

Detection of analytes by means of field-effect transistors bearing ligand-specific receptors is fundamentally limited by the shielding created by the electrical double layer (the "Debye length" limitation). We detected small molecules under physiological high-ionic strength conditions by modifying printed ultrathin metal-oxide field-effect transistor arrays with deoxyribonucleotide aptamers selected to bind their targets adaptively. Target-induced conformational changes of negatively charged aptamer phosphodiester backbones in close proximity to semiconductor channels gated conductance in physiological buffers, resulting in highly sensitive detection. Sensing of charged and electroneutral targets (serotonin, dopamine, glucose, and sphingosine-1-phosphate) was enabled by specifically isolated aptameric stem-loop receptors.

In vitro isolation of small-molecule-binding aptamers with intrinsic dye-displacement functionality.

Aptamer-based sensors offer a powerful tool for molecular detection, but the practical implementation of these biosensors is hindered by costly and laborious sequence engineering and chemical modification procedures. We report a simple strategy for directly isolating signal-reporting aptamers in vitro through systematic evolution of ligands by exponential enrichment (SELEX) that transduce binding events into a detectable change of absorbance via target-induced displacement of a small-molecule dye. We first demonstrate that diethylthiatricarbocyanine (Cy7) can stack into DNA three-way junctions (TWJs) in a sequence-independent fashion, greatly altering the dye's absorbance spectrum. We then design a TWJ-containing structured library and isolate an aptamer against 3,4-methylenedioxypyrovalerone (MDPV), a synthetic cathinone that is an emerging drug of abuse. This aptamer intrinsically binds Cy7 within its TWJ domain, but MDPV efficiently displaces the dye, resulting in a change in absorbance within seconds. This assay is label-free, and detects nanomolar concentrations of MDPV. It also recognizes other synthetic cathinones, offering the potential to detect newly-emerging designer drugs, but does not detect structurally-similar non-cathinone compounds or common cutting agents. Moreover, we demonstrate that the Cy7-displacement colorimetric assay is more sensitive than a conventional strand-displacement fluorescence assay. We believe our strategy offers an effective generalized approach for the development of sensitive dye-displacement colorimetric assays for other small-molecule targets.

INTEGRATED MICROFLUIDIC SELEX USING FREE SOLUTION ELECTROKINETICS.

Systematic evolution of ligands by exponential enrichment (SELEX) offers a powerful method to isolate affinity oligonucleotides known as aptamers, which can then be used in a wide range of applications from drug delivery to biosensing. However, conventional SELEX methods rely on labor intensive and time consuming benchtop operations. A simplified microfluidic approach is presented which allows integration of the affinity selection and amplification stages of SELEX for the isolation of target-binding oligonucleotides by combining bead-based biochemical reactions with free solution electrokinetic oligonucleotide transfer. Free solution electrokinetics allows coupling of affinity selection and amplification for closed loop oligonucleotide enrichment without the need for offline processes, flow handling components or gel components, while bead based selection and amplification allow efficient manipulation of reagents and reaction products thereby realizing on-chip loop closure and integration of the entire SELEX process. Thus the approach is capable of multi-round enrichment of oligonucleotides using simple transfer processes while maintaining a high level of device integration, as demonstrated by the isolation of an aptamer pool against a protein target (IgA) with significantly higher binding affinity than the starting library in approximately 4 hours of processing time.

High-Affinity Nucleic-Acid-Based Receptors for Steroids.

Artificial receptors for hydrophobic molecules usually have moderate affinities and limited selectivities. We describe three new classes of high affinity hydrophobic receptors for nonaromatic steroids based on deoxyribonucleotides, obtained through five high stringency selections coupled with tailored counter-selections. The isolation of multiple classes of high affinity steroid receptors demonstrates the surprising breadth of moderately sized hydrophobic binding motifs (<40 nucleotides) available to natural nucleic acids. Studies of interactions with analogs indicate that two classes, four-way junctions and 4XGN motifs, comprise receptors with shapes that prevent binding of specific steroid conjugates used in counter-selections. Furthermore, they strongly prefer nonhydroxylated steroid cores, which is typical for hydrophobic receptors. The third new class accommodates hydroxyl groups in high-affinity, high-selectivity binding pockets, thus reversing the preferences of the first two classes. The high-affinity binding of aptamers to targets efficiently inhibits double-helix formation in the presence of the complementary oligonucleotides. The high affinity of some of these receptors and tailored elimination of binding through counter-selections ensures that these new aptamers will enable clinical chemistry applications.

Integrated Microfluidic Isolation of Aptamers Using Electrophoretic Oligonucleotide Manipulation.

We present a microfluidic approach to integrated isolation of DNA aptamers via systematic evolution of ligands by exponential enrichment (SELEX). The approach employs a microbead-based protocol for the processes of affinity selection and amplification of target-binding oligonucleotides, and an electrophoretic DNA manipulation scheme for the coupling of these processes, which are required to occur in different buffers. This achieves the full microfluidic integration of SELEX, thereby enabling highly efficient isolation of aptamers in drastically reduced times and with minimized consumption of biological material. The approach as such also offers broad target applicability by allowing selection of aptamers with respect to targets that are either surface-immobilized or solution-borne, potentially allowing aptamers to be developed as readily available affinity reagents for a wide range of targets. We demonstrate the utility of this approach on two different procedures, respectively for isolating aptamers against a surface-immobilized protein (immunoglobulin E) and a solution-phase small molecule (bisboronic acid in the presence of glucose). In both cases aptamer candidates were isolated in three rounds of SELEX within a total process time of approximately 10 hours.

In vitro selection and amplification protocols for isolation of aptameric sensors for small molecules.

We recently optimized a procedure that directly yields aptameric sensors for small molecules in so-called structure-switching format. The protocol has a high success rate, short time, and is sufficiently simple to be readily implemented in a non-specialist laboratory. We provide a stepwise guide to this selection protocol.

Molecular learning with DNA kernel machines.

We present a computational learning method for bio-molecular classification. This method shows how to design biochemical operations both for learning and pattern classification. As opposed to prior work, our molecular algorithm learns generic classes considering the realization in vitro via a sequence of molecular biological operations on sets of DNA examples. Specifically, hybridization between DNA molecules is interpreted as computing the inner product between embedded vectors in a corresponding vector space, and our algorithm performs learning of a binary classifier in this vector space. We analyze the thermodynamic behavior of these learning algorithms, and show simulations on artificial and real datasets as well as demonstrate preliminary wet experimental results using gel electrophoresis.

Recognition and sensing of low-epitope targets via ternary complexes with oligonucleotides and synthetic receptors.

Oligonucleotide-based receptors or aptamers can interact with small molecules, but the ability to achieve high-affinity and specificity of these interactions depends strongly on functional groups or epitopes displayed by the binding targets. Some classes of targets are particularly challenging: for example, monosaccharides have scarce functionalities and no aptamers have been reported to recognize, let alone distinguish from each other, glucose and other hexoses. Here we report aptamers that differentiate low-epitope targets such as glucose, fructose or galactose by forming ternary complexes with high-epitope organic receptors for monosaccharides. In a follow-up example, we expand this method to isolate high-affinity oligonucleotides against aromatic amino acids complexed in situ with a nonspecific organometallic receptor. The method is general and enables broad clinical use of aptamers for the detection of small molecules in mix-and-measure assays, as demonstrated by monitoring postprandial waves of phenylalanine in human subjects.

Biomolecular computation with molecular beacons for quantitative analysis of target nucleic acids.

Molecular beacons are efficient and useful tools for quantitative detection of specific target nucleic acids. Thanks to their simple protocol, molecular beacons have great potential as substrates for biomolecular computing. Here we present a molecular beacon-based biomolecular computing method for quantitative detection and analysis of target nucleic acids. Whereas the conventional quantitative assays using fluorescent dyes have been designed for single target detection or multiplexed detection, the proposed method enables us not only to detect multiple targets but also to compute their quantitative information by weighted-sum of the targets. The detection and computation are performed on a molecular level simultaneously, and the outputs are detected as fluorescence signals. Experimental results show the feasibility and effectiveness of our weighted detection and linear combination method using molecular beacons. Our method can serve as a primitive operation of molecular pattern analysis, and we demonstrate successful binary classifications of molecular patterns made of synthetic oligonucleotide DNA molecules.

Biomolecular theorem proving on a chip: a novel microfluidic solution to a classical logic problem.

Biomolecules inside a microfluidic system can be used to solve computational problems, such as theorem proving, which is an important class of logical reasoning problems. In this article, the Boolean variables (literals) were represented using single-stranded DNA molecules, and theorem proving was performed by the hybridization and ligation of these variables into a double-stranded "solution" DNA. Then, a novel sequential reaction mixing method in a microfluidic chip was designed to solve a theorem proving problem, where a reaction loop and three additional chambers were integrated and controlled by pneumatic valves. DNA hybridization, ligation, toehold-mediated DNA strand displacement, exonuclease I digestion, and fluorescence detection of the double-stranded DNA were sequentially performed using this platform. Depending on the computational result, detection of the correct answer was demonstrated based on the presence of a fluorescence signal. This result is the first demonstration that microfluidics can be used to facilitate DNA-based logical inference.

Optimizing cross-reactivity with evolutionary search for sensors.

We report a straightforward evolutionary procedure to build an optimal sensor array from a pool of DNA sequences oriented toward three-way junctions. The individual sensors were mined from this pool under separate selection pressures to interact with four steroids, while allowing cross-reactivity, in a manner designed to achieve perfect classification of individual steroids. The resulting sensor array had three sensors and displayed discriminatory capacity between steroid classes over full ranges of concentrations. We propose that similar protocols can be used whenever we have two or more classes of samples, with individual classes being defined through gross differences in ratios of dominant families of responsive components.