ABSTRACT
Metal organic frameworks (MOFs) have unique advantages in optimizing the ionic conductivity of battery separators because of their rich cavity structure and highly ordered and connected pores. In this study, we used a hydrothermal method to synthesize a functional material, Ag-MOF crystal, as a separator coating content, and then studied the properties and application effect of the MOF-Al2O3-blended coating applying to a polyethylene (PE) separator (MOFxAl1-x/PE). Results show that MOF0.08Al0.92/PE (MOF/Al2O3 = 0.08:0.92) used in NCM811||Li cells significantly not only improves the fast charge-discharge performance of the cells but also inhibits the growth of lithium dendrites during long-term charge-discharge cycling; the Li+ transference number (tLi+) of the MOF0.08Al0.92/PE composite separator is 0.61; the Li||separator||Li half-cell circulates stably for 1000 h at varying current density from 0.5 to 10 mA cm-2 and only produces low overpotentials, indicating that MOF0.08Al0.92 stabilizes lithium. The initial capacity of the NCM811||Li cell using the MOF0.08Al0.92/PE separator is 165.0 mA h g-1, its capacity retention is 70.67% after 300 cycles at 5 C, and the interface resistance of the cells only increases from 13.8 to 31.5 Ω, whereas the capacity retention of Al2O3/PE separator batteries is only 40.41% (62.2 mA h g-1) under the same conditions. During the charge-discharge cycling, the MOF-Al2O3 coating induces the lithium anode to quickly form a stable and dense solid-electrolyte interphase layer, promotes the uniform deposition of Li+, and inhibits the growth of lithium dendrites as well.
ABSTRACT
Wearable devices developed with flexible electronics have great potential applications for human health monitoring and motion sensing. Although material softness and structural flexibility provide a deformable human-machine interface to adapt to joint bending or tissue stretching/compression, flexible sensors are inconvenient in practical uses as they usually require calibration every time they are installed. This article presents an approach to design and fabricate a flexible curvature sensor to measure human articular movements for amphibious applications. This flexible sensor employs the capacitive sensing principle, where the dielectric layer and electrodes are made from the polyurethane resin and eutectic gallium-indium (EGaIn) liquid metal; and the fabrication process is implemented with shape deposition molding for batch production. The sensing method for articular rotation angles employs the Euler beam model to make the sensor reusable after one-time calibration by compensating for the unpredicted manual installation error. The illustrative application to ankle sensing in amphibious gaits shows that the root-mean-square error is within 5° for different walking speeds (0.7-1.1 m/s) in treadmill tests and the maximum error is within 3° for underwater sensing with quasi-static measurements. It is expected that the proposed waterproof flexible sensor can push the boundaries of wearable robotics, human locomotion, as well as their related applications.
Subject(s)
Gait Analysis , Wearable Electronic Devices , Calibration , Gait , Humans , PressureABSTRACT
Descending projections from the thalamus and related structures to the midbrain are evolutionarily highly conserved. However, the basic organization of this auditory thalamotectal pathway has not yet been characterized. The purpose of this study was to obtain a better understanding of the anatomical and neurochemical features of this pathway. Analysis of the distributions of retrogradely labeled cells after focal injections of retrograde tracer into the inferior colliculus (IC) of the mouse revealed that most of the subcortical descending projections originated in the brachium of the IC and the paralaminar portions of the auditory thalamus. In addition, the vast majority of thalamotectal cells were found to be negative for the calcium-binding proteins calbindin, parvalbumin, or calretinin. Using two different strains of GAD-GFP mice, as well as immunostaining for GABA, we found that a subset of neurons in the brachium of the IC is GABAergic, suggesting that part of this descending pathway is inhibitory. Finally, dual retrograde injections into the IC and amygdala plus corpus striatum as well into the IC and auditory cortex did not reveal any double labeling. These data suggest that the thalamocollicular pathway comprises a unique population of thalamic neurons that do not contain typical calcium-binding proteins and do not project to other paralaminar thalamic forebrain targets, and that a previously undescribed descending GABAergic pathway emanates from the brachium of the IC. J. Comp. Neurol. 525:885-900, 2017. © 2016 Wiley Periodicals, Inc.
