Tree-structured parzen estimator optimized-automated machine learning assisted by meta-analysis for predicting biochar-driven N2O mitigation effect in constructed wetlands.

Biochar is a carbon-neutral tool for combating climate change. Artificial intelligence applications to estimate the biochar mitigation effect on greenhouse gases (GHGs) can assist scientists in making more informed solutions. However, there is also evidence indicating that biochar promotes, rather than reduces, N2O emissions. Thus, the effect of biochar on N2O remains uncertain in constructed wetlands (CWs), and there is not a characterization metric for this effect, which increases the difficulty and inaccuracy of biochar-driven alleviation effect projections. Here, we provide new insight by utilizing machine learning-based, tree-structured Parzen Estimator (TPE) optimization assisted by a meta-analysis to estimate the potency of biochar-driven N2O mitigation. We first synthesized datasets that contained 80 studies on global biochar-amended CWs. The mitigation effect size was then calculated and further introduced as a new metric. TPE optimization was then applied to automatically tune the hyperparameters of the built extreme gradient boosting (XGBoost) and random forest (RF), and the optimum TPE-XGBoost obtained adequately achieved a satisfactory prediction accuracy for N2O flux (R2 = 91.90%, RPD = 3.57) and the effect size (R2 = 92.61%, RPD = 3.59). Results indicated that a high influent chemical oxygen demand/total nitrogen (COD/TN) ratio and the COD removal efficiency interpreted by the Shapley value significantly enhanced the effect size contribution. COD/TN ratio made the most and the second greatest positive contributions among 22 input variables to N2O flux and to the effect size that were up to 18% and 14%, respectively. By combining with a structural equation model analysis, NH4+-N removal rate had significant negative direct effects on the N2O flux. This study implied that the application of granulated biochar derived from C-rich feedstocks would maximize the net climate benefit of N2O mitigation driven by biochar for future biochar-based CWs.

Zbtb16 increases susceptibility of atrial fibrillation in type 2 diabetic mice via Txnip-Trx2 signaling.

Atrial fibrillation (AF) is the most prevalent sustained cardiac arrhythmia, and recent epidemiological studies suggested type 2 diabetes mellitus (T2DM) is an independent risk factor for the development of AF. Zinc finger and BTB (broad-complex, tram-track and bric-a-brac) domain containing 16 (Zbtb16) serve as transcriptional factors to regulate many biological processes. However, the potential effects of Zbtb16 in AF under T2DM condition remain unclear. Here, we reported that db/db mice displayed higher AF vulnerability and Zbtb16 was identified as the most significantly enriched gene by RNA sequencing (RNA-seq) analysis in atrium. In addition, thioredoxin interacting protein (Txnip) was distinguished as the key downstream gene of Zbtb16 by Cleavage Under Targets and Tagmentation (CUT&Tag) assay. Mechanistically, increased Txnip combined with thioredoxin 2 (Trx2) in mitochondrion induced excess reactive oxygen species (ROS) release, calcium/calmodulin-dependent protein kinase II (CaMKII) overactivation, and spontaneous Ca2+ waves (SCWs) occurrence, which could be inhibited through atrial-specific knockdown (KD) of Zbtb16 or Txnip by adeno-associated virus 9 (AAV9) or Mito-TEMPO treatment. High glucose (HG)-treated HL-1 cells were used to mimic the setting of diabetic in vitro. Zbtb16-Txnip-Trx2 signaling-induced excess ROS release and CaMKII activation were also verified in HL-1 cells under HG condition. Furthermore, atrial-specific Zbtb16 or Txnip-KD reduced incidence and duration of AF in db/db mice. Altogether, we demonstrated that interrupting Zbtb16-Txnip-Trx2 signaling in atrium could decrease AF susceptibility via reducing ROS release and CaMKII activation in the setting of T2DM.

Ntsr1 contributes to pulmonary hypertension by enhancing endoplasmic reticulum stress via JAK2-STAT3-Thbs1 signaling.

Pulmonary hypertension (PH) is a severe clinical syndrome with pulmonary vascular remodeling and poor long-term prognosis. Neurotensin receptor 1 (Ntsr1), serve as one of the G protein-coupled receptors (GPCRs), implicates in various biological processes, but the potential effects of Ntsr1 in PH development are unclear. The Sugen/Hypoxia (SuHx) or monocrotaline (MCT) induced rat PH model was used in our study and the PH rats showed aggravated pulmonary artery remodeling and increased right ventricular systolic pressure (RVSP). Our results revealed that Ntsr1 induced endoplasmic reticulum (ER) stress response via ATF6 activation contributed to the development of PH. Moreover, RNA-sequencing (RNA-seq) and phosphoproteomics were performed and the Ntsr1-JAK2-STAT3-thrombospondin 1 (Thbs1)-ATF6 signaling was distinguished as the key pathway. In vitro, pulmonary artery smooth muscle cells (PASMCs) under hypoxia condition showed enhanced proliferation and migration properties, which could be inhibited by Ntsr1 knockdown, JAK2 inhibitor (Fedratinib) treatment, STAT3 inhibitior (Stattic) treatment, Thbs1 knockdown or ATF6 knockdown. In addition, adeno-associated virus 1 (AAV1) were used to knockdown the expression of Ntsr1, Thbs1 or ATF6 in rats and reversed the phenotype of PH. In summary, our results reveal that Ntsr1-JAK2-STAT3-Thbs1 pathway can induce enhanced ER stress via ATF6 activation and increased PASMC proliferation and migration capacities, which can be mechanism of the pulmonary artery remodeling and PH. Targeting Ntsr1 might be a novel therapeutic strategy to ameliorate PH.

Incidence, impact and predictors of residual device patency after left atrial appendage closure with the LACbes device.

BACKGROUND: The residual device patency (RDP) after left atrial appendage closure (LAAC) with the LACbes device has not been specifically explored in atrial fibrillation (AF) patients. This study aims to explore the incidence, impact and predictors of RDP detected by cardiac computed tomography angiography (CCTA) post LAAC. METHODS: AF patients implanted with the LACbes device were prospectively enrolled. CCTA device surveillance was performed at 3 months post-procedure. Major adverse events (MAEs), including stroke/transient ischemic attack, major bleeding and all-cause death, were evaluated. RESULTS: Among 141 patients with CCTA surveillance, 56 (39.7%) showed no visible leak and 85 (60.3%) showed RDP. During the median follow-up of 443 [232, 706] days, the presence of RDP was not associated with an increased risk of MAEs (adjusted hazard ratio [HR]: 4.07, 95% confidence interval [CI]: 0.49-34.24, p = 0.196), while peri-device leak (PDL) at the lobe was associated with heightened risks of MAEs (adjusted HR: 6.85, 95% CI: 1.62-28.89, p = 0.009). In patients with PDL at the lobe, antiplatelet after 6 months (HR: 0.20, 95% CI: 0.05-0.91, p = 0.038) was independent protective predictor of MAEs. Besides, current smoking (odds ratio [OR]: 7.52, 95% CI: 2.68-21.08, p < 0.001) and maximum diameter of LAA orifice (OR: 1.16, 95% CI: 1.00-1.34, p = 0.048) were independent predictors of PDL at the lobe. CONCLUSIONS: Presence of PDL at the device lobe detected by CCTA at 3-month post LAAC with LACbes is associated with unfavorable prognosis in AF patients. CLINICAL TRIAL REGISTRATION: ClinicalTrials.gov Identifier: NCT03788941.

Three-dimensional model construction and wind simulation of different tree species in farmland shelter.

Protective forests are the ecological barriers of oases in arid sand areas and can effectively prevent and control wind and sand hazards. The structural characteristics of individual trees, as the basic unit of protective forests, are the key factors affecting the protective benefits. With the typical leafless tree species of Ulan Buh Desert oasis, i.e., Populus alba var. pyramidalis, Populus nigra var. thevestina, and Populus popularis, as the research objects, and by using the ground-based LiDAR and through computational fluid dynamics (CFD), we fully explored the structural characteristics of individual trees and their surrounding aerodynamic characteristics on the basis of real 3D models. We further established the relationship between structural parameters of individual trees and wind field index. The results showed that combining AdQSM and MeshLab to build tree models had high accuracy. The wind field around the individual trees could be roughly divided into six regions, including the attenuation zone of the windward side of the plant, the acceleration zone at the top of the plant, the eddy zone, the calm zone, the transition zone, and the recovery zone of leeward side of the plant. The pressure field around individual trees showed a gradual change of high pressure on the windward side to low pressure on the leeward side. Horizontally, in the range of 20% to 50% reduction in relative wind speed, the effective protection distances were 0.21H-1.51H, 0.20H-0.91H, and 0.25H-1.64H (H was the corresponding tree height) for P. alba var. pyramidalis, P. nigra var. thevestina, and P. popularis, corresponding to effective protection areas of 18-294, 15-227, and 18-261 m2, respectively. The maximum wind speed decay rate in the vertical direction was at 0.3H height for P. alba var. pyramidalis and P. popularis, and was reflected at 0.5H height for P. nigra var. thevestina. The correlation and stepwise regression analysis of the single tree structure parameters with the wind field indicators clearly indicated that optical porosity and volume porosity dominated the protection effect. Among the wind field factors, the best regression models related to the porous coefficient were screened for three factors, including diameter at breast height, tree surface area, and optical porosity. The regression variables screened for effective protection distance and effective protection area differed among the classes.

Impacts of draw solutes on the fate of tetracycline in an osmotic membrane bioreactor: Role of the combination between membrane fouling and microorganisms.

Osmotic membrane bioreactors (OMBRs) are considered a suitable technology for treating wastewater containing tetracycline due to their high rejection and biodegradation efficiency. However, the impact of membrane fouling layer (i.e., chemical composition, microbial composition, and formation) on the filtration and biodegradation of tetracycline is still unclear. Herein, the effects of draw solute concentration and type on the formation of a membrane fouling layer for tetracycline filtration and its relationship with microbial activity were investigated. The results showed that over 99% of tetracycline was retained on the feed side by membrane rejection, and the fouling layer played an important role in tetracycline filtration. Specifically, membrane foulants resulted in a more hydrophilic membrane facilitating tetracycline filtration, while the tetracycline-degrading genera from the fouled membrane promoted tetracycline degradation. The structure equation model showed that tetracycline filtration dominated by electrostatic repulsion between tetracycline and the fouled membrane was more important than tetracycline degradation for tetracycline removal (path coefficient of 0.655 vs. 0.395). This study provided insights into the combined effect of membrane foulants and microorganisms on tetracycline removal.

Assessment on the declining degree of farmland shelter forest in a desert oasis based on LiDAR and hyperspectrum imagery.

We examined the growth decline and health status of farmland protective forest belt (Populus alba var. pyramidalis and Populus simonii shelterbelts) in Ulanbuh Desert Oasis by using airborne hyperspectral and ground-based LiDAR to collect the hyperspectral images and point cloud data of the whole forest belt respectively. Through correlation analysis and stepwise regression analysis, we constructed the evaluation model of the decline degree of farmland protection forest with the spectral differential value, vegetation index, and forest structure parameters as independent variables and the tree canopy dead branch index of the field survey as dependent variables. We further tested the accuracy of the model. The results showed that the evaluation accuracy of the decline degree of P. alba var. pyramidalis and P. simonii by LiDAR method was better than that by hyperspectral method, and that the evaluation accuracy of the combined LiDAR and hyperspectral method was the highest. Using the LiDAR method, hyperspectral method, the combined method, the optimal model of P. alba var. pyramidalis was all light gradient boosting machine model, with the overall classification accuracy being 0.75, 0.68, 0.80, and Kappa coefficient being 0.58, 0.43, 0.66, respectively. The optimal model of P. simonii was random forest model, random forest model, and multilayer perceptron model, with the overall classification accuracy being 0.76, 0.62, 0.81, and Kappa coefficient being 0.60, 0.34, 0.71, respectively. This research method could accurately check and monitor the decline of plantations.

Shedding light on the transfer of tetracycline in forward osmosis through experimental investigation and machine learning modeling.

Tetracycline in wastewater can pose adverse impacts on the environment and human health. Forward osmosis (FO) is a promising method to reject antibiotics due to its low energy demand and high rejection rate. Tetracycline rejection during FO is a complicated process. Mechanistic models have been developed to describe antibiotic rejection by the FO membrane under ideal conditions but cannot be applied to real wastewater. Herein, the effects of draw concentration, pH, and solute type on the fate of tetracycline during FO were investigated by combining experimentation, factor analysis, and artificial neural network (ANN) modeling. High draw concentrations led to high convection that favored tetracycline diffusion. Low draw pH helped reject antibiotics potentially due to the decreased tortuosity and pore size of the FO membrane. When different draw solutes were tested, both convection and electrostatic interaction exerted effects on tetracycline retention on the FO membrane surface, and steric hindrance could further affect the amount of tetracycline in the draw solution. Exploratory factor analysis (EFA) showed that tetracycline rejection was a combined result of convection, steric hindrance, and electrostatic interactions. Path analysis revealed the significant roles of initial conductivity and draw pH in tetracycline rejection. Eight representative input variables were selected from 13 observed explanatory variables using redundancy analysis (RDA), based on which an ANN was trained and successfully predicted tetracycline diffusion and transfer through the FO membrane. These results have provided practical and predictive insights in the development of FO processes for efficient treatment of pharmaceutical wastewater.

Insight into the role of microbial community interactions on nitrogen removal facilitated by a bioelectrochemical system in an osmotic membrane bioreactor.

Insufficient nitrogen removal is a key challenge for the application of an osmotic membrane bioreactor (OMBR). The integration of a bioelectrochemical system (BES) and an OMBR was constructed to enhance nitrogen removal.To optimize the operation, five aeration intensities and three draw solutes (DSs) were applied in the proposed system. The results showed that the proposed system obtained the highest nitrogen removal efficiency of 77.36 ± 3.55 % with an aeration intensity of 0.6 L/min, and it was further increased to 94.99 ± 2.83 % and 99.92 ± 0.14 %with the NaOAc DS and the glucose DS, respectively.The analysis ofmetabolic pathways implied that species interactions existed,andthe following different mechanisms of enhanced nitrogen removal for the two organic DSs were proposed. The growth of denitrifying bacteria was enhanced by using reverse-fluxed organic NaOAc DS as a carbon source;glucoseDS stimulated electron transfer system activity to accelerate denitrification.

Enhanced removal of antibiotics and antibiotic resistance genes in a soil microbial fuel cell via in situ remediation of agricultural soils with multiple antibiotics.

Soil microbial fuel cells (MFCs) have been applied for the in situ remediation of soils polluted by single antibiotics. However, the investigation of only single antibiotic pollution has hindered MFC application in real-world soil remediation, where the effects of multiple antibiotics with similar chemical structures on the fate of antibiotics and their corresponding antibiotic resistance genes (ARGs) remain unknown. In this study, antibiotic removal rates, microbial community compositions, metabolite compositions, and ARG abundances were investigated in soil MFCs by adding two commonly used antibiotics (sulfadiazine, SDZ, and sulfamethoxazole, SMX), and comparing them with the addition of only a single antibiotic (SDZ). The antibiotic removal rate was higher in the soil MFC with addition of mixed antibiotics compared to the single antibiotic due to enhanced biodegradation efficiency in both the upper (57.24% of the initial antibiotic concentration) and lower layers (57.07% of the initial concentration) of the antibiotic-polluted soils. Bacterial community diversity in the mixed antibiotic conditions increased, and this likely resulted from the decreased toxicity of intermediates produced during antibiotic biodegradation. Moreover, the addition of mixed antibiotics led to lower risks of ARG release into soil environments, as reflected by higher abundances of host bacteria in the single antibiotic treatment. These results encourage the further development of soil MFC technology for in situ remediation of antibiotic-polluted soils.

New insights into the role of molecular structures on the fate and behavior of antibiotics in an osmotic membrane bioreactor.

Osmotic membrane bioreactors (OMBRs) have been applied to enhance removal of antibiotics, however, information on the effects of molecular structures on the behavior of antibiotics is still lacking. Herein, adsorption kinetics, transformation pathways, and membrane rejection mechanisms of OMBRs were investigated by adding two typical antibiotics (i.e., sulfadiazine, SDZ, and tetracycline hydrochloride, TC-HCl). 80.70-91.12% of TC-HCl was removed by adsorption and biodegradation, while 17.50-75.14% of SDZ was removed by membrane rejection; this depended on its concentration due to reduced electrostatic interactions and hydrophobic adsorption. The adsorption capacity of TC-HCl (i.e., 1.34±0.01 mg/g) was significantly higher than that of SDZ (i.e., 0.18±0.03 mg/g) due to enhanced π-π interactions, hydrogen bonding and improved electrostatic interactions. The abundant production of polysaccharide-like substances from TC-HCl biodegradation contributed to microbial metabolism and thus enhanced microbial function during TC-HCl biotransformation. The primary degradation pathways were determined by microbial function analysis, and the primary intermediates from TC-HCl degradation were less toxic than those from SDZ degradation due to the different reactions of amino groups. These results and the corresponding mechanism provide a theoretical foundation for the further development of OMBR technology for highly efficient treatment of antibiotic wastewater.

Minimizing salinity accumulation via regulating draw solute concentration in a bioelectrochemically assisted osmotic membrane bioreactor.

A suitable draw solute (DS) concentration in bioelectrochemically assisted osmotic membrane bioreactor (BEA-OMBR) can convert the "negative effect" of salinity accumulation into a "beneficial effect" by using the reverse-fluxed DS as a buffer agent or a carbon source supplement. Herein, the effect of DS concentration from acid buffer solution (i.e., ammonium chloride, NH4Cl), alkaline buffer solution (i.e., sodium bicarbonate, NaHCO3), and organic solution (i.e., sodium acetate, NaOAc) on salinity accumulation was systematically investigated. Salinity accumulation with NaHCO3 DS mainly derived from reversal fluxed sodium ion (Na+, major contributor with DS concentration ≤0.25 M) and bicarbonate ion (main contributor with DS concentration ≥0.50 M): Na+ accumulation could be mitigated by Na+ transport dominant by electrically driven migration (i.e., 21.3-62.1% of reverse-fluxed Na+), and bicarbonate accumulation could be reduced by buffer system. A medium-low concentration of 0.25 M NH4Cl DS had a better performance on current density of 165.0 ± 23.0 A m-3 and COD removal efficiency of 91.5 ± 3.4% by taking advantage that 77.7 ± 1.3% of reverse-fluxed ammonium could be removed by biological treatment and ammonium transport. A high NaOAc DS concentration (i.e., ≥0.05 M) exhibited a higher current density of 145.3-146.0 A m-3 but a lower COD removal efficiency due to the limited carbon source utilization capacity of anaerobic bacteria. Both concentration diffusion (20.9-28.3%) and electrically driven migration (29.5-39.4%) promoted reverse-fluxed Na+ transport to catholyte and thus mitigated Na+ accumulation in the feed/anolyte. These findings have provided an optimal DS concentration for BEA-OMBR operation and thus encourage its further development.

Effects of operating parameters on salinity accumulation in a bioelectrochemically-assisted osmotic membrane bioreactor.

Salinity accumulation in osmotic membrane bioreactors (OMBRs) is one of the key challenges, which can be mitigated in situ by reverse-fluxed solute transport through integration of bioelectrochemical systems (BES). The effects of several key operating parameters on salinity accumulation were investigated. Salinity accumulation depended on balance between reversal solute flux (RSF) and reverse-fluxed ammonium (RFA) transport, which was driven by electrical migration and concentration diffusion. DS concentration was the primary factor influencing RSF, and the lowest DS concentration exhibited the minimum solute leakage. Aeration played a vital role in RFA transport, and a higher aeration helped to enhance RFA transport. Increased current generation (i.e., influent flow rate of 0.5 mL min-1 and external resistance of 5.0 Ω) contributed to RFA migration. The lack of electrolyte addition in catholyte contributed to RFA diffusion. These optimal parameters encourage the further development of an effective strategy for salinity mitigation in BES-based OMBR technology.

A comprehensive review of nutrient-energy-water-solute recovery by hybrid osmotic membrane bioreactors.

Hybrid osmotic membrane bioreactor (OMBR) takes advantage of the cooperation of varying biological or desalination processes and can achieve NEWS (nutrient-energy-water-solute) recovery from wastewater. However, a lack of universal parameters hinders our understanding. Herein, system configurations and new parameters are systematically investigated to help better evaluate recovery performance. High-quality water can be produced in reverse osmosis/membrane distillation-based OMBRs, but high operation cost limits their application. Although bioelectrochemical system (BES)/electrodialysis-based OMBRs can effectively achieve solute recovery, operation parameters should be optimized. Nutrients can be recovered from various wastewater by porous membrane-based OMBRs, but additional processes increase operation cost. Electricity recovery can be achieved in BES-based OMBRs, but energy balances are negative. Although anaerobic OMBRs are energy-efficient, salinity accumulation limits methane productions. Additional efforts must be made to alleviate membrane fouling, control salinity accumulation, optimize recovery efficiency, and reduce operation cost. This review will accelerate hybrid OMBR development for real-world applications.

Simultaneous reduction of antibiotics leakage and methane emission from constructed wetland by integrating microbial fuel cell.

In this study, a microbial fuel cell coupled with constructed wetland (CW-MFC) was built to demonstrate that integration of MFC can enhance antibiotics (sulfadiazine (SDZ) and ciprofloxacin (CIP)) removal in CWs and control CH4 emissions. Better COD and antibiotics removal performance was obtained in CW-MFC. Notably, both reactors can remove more than 90.00% of CIP. A decline in methane fluxes (by 15.29%) was also observed in CW-MFC compared with CW. The presence of Acorus tatarinowii had no obvious effect on antibiotics removal but the application of manganese ore substrate reduced methane emissions. Further study showed that Proteobacteria was enriched on the Mn substrate anode and the relative abundance of Methanothrix was declined. The results suggested that suppression of methanogenesis may be contributed to a low methane flux in CW-MFC. This study will facilitate the application of CW-MFC to treat antibiotics wastewater and control the ecological risks of greenhouse gas emissions.

Fourier-domain optical coherence tomography-guided phototherapeutic keratectomy for the treatment of anterior corneal scarring.

AIM: To evaluate the safety, visual and anatomic outcomes of fourier-domain optical coherence tomography (FD-OCT)-guided excimer laser phototherapeutic keratectomy (PTK) combined with photorefractive keratectomy (PRK) surgery in treating anterior corneal scarring. METHODS: Clinical data of 23 eyes of 21 patients with anterior corneal scarring underwent FD-OCT-guided PTK and PRK from Dec. 2014 to Jul. 2016 were reviewed. Patients were assessed for preoperative and postoperative uncorrected visual acuity (UCVA), best spectacle-corrected visual acuity (BSCVA), contrast sensitivity (CS), FD-OCT, corneal topography and colour figures of anterior segments. RESULTS: The preoperative corneal pathologic conditions included viral keratitis (7 patients, 7 eyes), band keratopathy (2 patients, 4 eyes), corneal dystrophy (4 patients, 4 eyes), traumatic corneal disease (2 patients, 2 eyes) and corneal chemical injury (6 patients, 6 eyes). Mean follow-up time was 10.65 (range, 3-19)mo. UCVA (in logMAR) improved from a mean of 0.79 (95%CI, 0.28-1.29) preoperatively to a mean of 0.45 (95%CI, 0.29-0.62) postoperatively (P=0.021). BSCVA (in logMAR) improved from 0.57 (95%CI, 0.27-0.88) preoperatively to a mean of 0.28 (95%CI, 0.15-0.41) postoperatively (P=0.001). Corneal topographic indices postoperatively showed significant improvement in corneal cylinder (P=0.009), the surface regularity index (P=0.007) and surface asymmetry index (P=0.00). Postoperative spherical equivalent averaged -0.53 diopters (-1.49 to 0.42). No complications were associated with the treatment. CONCLUSION: FD-OCT-guided PTK combined with PRK is safe and effective for the treatment of anterior corneal scarring by eliminating or reducing corneal opacities.

Bioelectrochemically-assisted nitrogen removal in osmotic membrane bioreactor.

Nitrogen removal in osmosis membrane bioreactor (OMBR) is important to its applications but remains a challenge. In this study, a bioelectrochemically-assisted (BEA) operation was integrated into the feed side of OMBRs to enhance nitrogen removal, and sodium acetate was served as a draw solute and supplementary carbon source for the growth of denitrifying bacteria due to reversed-solute. The effects of operation mode and influent ammonium (NH4 +) concentration were systematically examined. Compared to a conventional OMBR, the integrated BEA-OMBR achieved higher total nitrogen removal efficiency of 98.13%, and chemical oxygen demand removal efficiency of 95.83% with the influent NH4 +-N concentration of 39 mg L-1. The sequencing analyses revealed that ammonia-oxidizing bacteria (0-0.04%), nitrite-oxidizing bacteria (0-0.16%), and denitrifying bacteria (1.98-8.65%) were in abundance of the microbial community in the feed/anode side of integrated BEA-OMBR, and thus BEA operation increased the diversity of the microbial community in OMBR. Future research will focus on improving nitrogen removal from a high ammonium strength wastewater by looping anolyte effluent to the cathode. These findings have demonstrated that BEA operation can be an effective approach to improve nitrogen removal in OMBRs toward sustainable wastewater treatment.

Degradation of sulfamethoxazole in low-C/N ratio wastewater by a novel membrane bioelectrochemical reactor.

Sulfamethoxazole (SMX) pollution in wastewater threatens public health. A novel membrane bioelectrochemical reactor (MBER) with loop operation was developed for SMX degradation in low-C/N ratio wastewater. A gas-permeable silicone membrane module was used to precisely control the dissolved oxygen in the catholyte and save energy. Compared with a traditional membrane bioreactor (i.e., open-circuit reactor), the removal of SMX was increased from 49.91% to 71.10% in the proposed MBER (i.e., closed-circuit reactor). Sequencing analyses revealed that SMX was removed via cometabolism with NH4+-N and COD removal in both the anode and cathode chambers. Six intermediates were detected as degradation products in the cathodic effluent; these intermediates pose a similar potential threat to the environment as SMX. Two possible degradation pathways, deduced from the sequencing analyses and degradation products, were proposed. These results provide a new technology for improving SMX removal through the integration/coupling of bioelectrochemical technology into a membrane bioreactor.

Accumulation of sulfonamide resistance genes and bacterial community function prediction in microbial fuel cell-constructed wetland treating pharmaceutical wastewater.

Microbial fuel cell constructed wetlands (CW-MFCs) with different circuit operation conditions and hydraulic retention time (HRT) were constructed to evaluate their ability to remove and accumulate pharmaceutical and personal care products (PPCPs) (sulfadiazine (SDZ), carbamazepine (CBZ), naproxen (NPX) and ibuprofen (IBP)) during four months running process. The abundance level of corresponding sulfonamide antibiotic resistance genes (ARGs) was also investigated. The results showed that closed circuit operation of CW-MFC contributed to the decrease in mass loading of COD, NH4+-N, PPCPs, and wastewater toxicity in the effluent. Additionally, closed circuit operation with low HRT contributed to enhancing selected PPCP mass accumulation on electrodes by electro-adsorption, and thus the higher sulfonamide ARG abundance was detected in the electrodes and effluent. Moreover, the composition of bacteria was greatly influenced by the mass accumulation of PPCPs revealed by redundancy analysis results. Procrustes analysis results further demonstrated that bacterial community contributed greatly to the ARGs profiles. Therefore, ARGs with their host bacteria revealed by network analysis were partially deposited on electrode substrates, and thus ARGs were effectively accumulated on electrodes. Function analysis of the bacterial community from PICRUSt predicted metagenomes revealed that closed circuit mode enhanced the abundances of the function genes of metabolic and the multiple ARGs, suggesting that closed circuit operation exhibited positive effects on metabolic process and ARG accumulation in CW-MFC system.

Bioelectrochemically assisted osmotic membrane bioreactor with reusable polyelectrolyte draw solutes.

The aim of this work was to study reverse solute flux (RSF) from osmotic membrane bioreactor (OMBR) and consequent solute buildup in the feed side. A polyelectrolyte (PAA-Na) served as a draw solute (DS) to minimize RSF in OMBRs. In addition, a bioelectrochemical system (BES) was employed to drive accumulated cations from the feed/anode side into the cathode compartment, subsequently achieving PAA-Na DS recovery with the aid of high catholyte pH. Compared to the 1 M NH4HCO3 DS, the 0.48 g mL-1 PAA-Na DS produced consistently stable water flux, enhanced water recovery and increased ammonium removal efficiency. Due to a dynamic balance between PAA removal and continuing RSF, the residual PAA concentration was 72 mg L-1 on the feed side (27.0% of TOC). These results demonstrate the advantages of integrating a PAA-Na DS with a BES to mitigate RSF and to support further development of OMBR technology.