ABSTRACT
Sewage sludge (SS) application to forest plantation soils as a fertilizer and/or soil amendment is increasingly adopted in plantation forest management. However, the potential risks of SS-derived heavy metals (HMs) remain a concern. Many factors, including woodland slope may affect the risks, but the understanding of this issue is limited. This research evaluated the HMs migration via surface runoff, interflow, and sediments when SS was applied in woodlands of varying slopes. We conducted indoor rainfall simulations and natural rainfall experiments to clarify the effect of slope on the migration of HMs via runoff (including surface and interflow) and sediments. In the simulated rainfall experiment, HMs lost via sediments increased by 9.79-27.28% when the slope increased from 5° to 25°. However, in the natural rainfall experiment, when the slope of forested land increased from 7° to 23°, HMs lost via surface runoff increased by 2.38% to 6.13%. These results indciate that the surface runoff water on a high slope (25°) posed high water quality pollution risks. The migration of HMs via surface runoff water or interflow increased as the steepness of the slope increased. The total migration of Cu, Zn, Pb, Ni, Cr and Cd via sediment greatly exceeded that via surface runoff and interflow. Particles ≤ 0.05 mm contributed the most to the ecological risks posed by sediments. Cd was the main source of potential ecological risks in sediments under both experimental conditions.
ABSTRACT
Woodland utilization is a promising disposal method for sewage sludge (SS). However, the potential risk of heavy metals (HMs) transport with runoff must be considered. Among the various factors influencing HMs loss, SS application methods (Holing application, HA; Broadcasting and mixing application, BM; Broadcasting application, BA) are likely to cause significant effects by altering soil erosion and soil aggregates. This study aimed to determine how SS application methods affect HMs loss, soil aggregates erosion, and how they are related. Accordingly, the losses of HMs in surface runoff, interflow, and sediment were quantified during six simulated rainfalls. The results demonstrated that all methods reduced surface runoff, but BA was the most effective. Additionally, BA significantly reduced the total sediment yield and the total proportion of the <0.05 mm fraction aggregates. Moreover, BA had the smallest cumulative losses of Pb and Cd through surface runoff and Cu, Pb, and Cd through sediment. Sediment was the most important pathway for HMs loss, through which over 76.56 % of HMs were lost. In BA, the <0.05 mm fraction aggregates had the lowest HMs load, whereas in other treatments had the highest (54.33 %-80.33 %). The potential ecological risk coefficient of Cd was beyond "moderate" in all the pathways of BM and "high" in the interflow of each SS treatment. Nonetheless, when the multi-elements were evaluated collectively, the potential ecological risk index for each SS treatment was categorized as "low". Overall, BA not only reduced soil erosion but also posed no risk of HMs pollution. It should be noted that the loss of Cd in the interflow had a great impact, while the <0.05 mm fraction aggregates played a significant role in the HMs load. Thus, the current study not only provides an effective approach for the environmentally safe disposal of SS but also proposes a scientific method for the application of SS in woodlands.
ABSTRACT
The wastes such as sewage sludge (SS) can be used to amend soil of abandoned rare-earth mine land (ARL). The energy plant Jatropha curcas could be used as a pioneer tree species in the ARL. In a pot experiment to address the responses of growth and element uptake of J. curcas, three treatments were established: adding SS to the soil of ARL (T1), adding SS and bagasse to the soil of ARL (T2), adding SS, bagasse and passivator to the soil of ARL (T3), with the untreated soil of the ARL as the control (CK). The results showed that compared with CK, T1 only significantly increased the plant height of J. curcas, T2 and T3 significantly increased the plant height, ground diameter and dry biomass of J. curcas, of which the total dry biomass increased by more than 184.7%. All the three treatments significantly increased the contents of N, P, K and Cu in J. curcas. T1 and T2 significantly increased the proportion of exchangeable Zn, Cd and Ni in the substrates, while T3 showed the opposite effects. T3 significantly decreased the migration factor (M) and mobility factor (MF) of Zn, Cd, Ni in the substrates, and significantly reduced the contents of Zn, Pb, Cd, Ni in J. curcas, with an inhibition rate of over 36.1%. The comprehensive evaluation of the membership function showed that the order of growth promotion effects on J. curcas was T2>T3>T1>CK, while the order of capacity of inhibiting J. curcas to accumulate Cu, Zn, Pb, Cd, Ni was T3>CK>T2>T1. The combined application of SS and bagasse significantly promoted the growth and element accumulation of J. curcas, and the addition of passivator significantly reduced heavy metals uptake without affecting the growth of J. curcas.
Subject(s)
Jatropha , Metals, Heavy , Soil Pollutants , Metals, Heavy/analysis , Sewage , Soil , Soil Pollutants/analysisABSTRACT
The seeds of Jatropha curcas contain a high percentage of biodiesel. However, low seed yield which was limited by its poor female flowers was a bottleneck for its utilization. Here, we compared the transcriptomic profiles of five different samples during floral sex differentiation stages using Illumina Hiseq 4000. Our results showed that hundreds of differentially expressed genes (DEGs) were detected in floral sex initiation period, but thousands of DEGs were involved in the stamens and ovules development process. Moreover, the DEGs were mainly shown up-regulation in male floral initiation, but mainly down-regulation in female floral initiation. Male floral initiation was associated with the flavonoid biosynthesis pathway while female floral initiation was related to the phytohormone signal transduction pathway. Cytokinin (CTK) signaling triggered the initiation of female floral primordium, thereafter other phytohormones co-promoted the female floral development. In addition, the floral organ identity genes played important roles in floral sex differentiation process and displayed a general conservation of the ABCDE model in J. curcas. To the best of our knowledge, this data is the first comprehensive analysis of the underlying regulatory mechanism and the related genes during floral sex differentiation in J. curcas, which help in engineering high-yielding varieties of J. curcas.
