Compressive strain in Cu catalysts: Enhancing generation of C2+ products in electrochemical CO2 reduction.

Elastic strain in Cu catalysts enhances their selectivity for the electrochemical CO2 reduction reaction (eCO2RR), particularly toward the formation of multicarbon (C2+) products. However, the reasons for this selectivity and the effect of catalyst precursors have not yet been clarified. Hence, we employed a redox strategy to induce strain on the surface of Cu nanocrystals. Oxidative transformation was employed to convert Cu nanocrystals to CuxO nanocrystals; these were subsequently electrochemically reduced to form Cu catalysts, while maintaining their compressive strain. Using a flow cell configuration, a current density of 1 A/cm2 and Faradaic efficiency exceeding 80% were realized for the C2+ products. The selectivity ratio of C2+/C1 was also remarkable at 9.9, surpassing that observed for the Cu catalyst under tensile strain by approximately 7.6 times. In-situ Raman and infrared spectroscopy revealed a decrease in the coverage of K+ ion-hydrated water (K·H2O) on the compressively strained Cu catalysts, consistent with molecular dynamics simulations and density functional theory calculations. Finite element method simulations confirmed that reducing the coverage of coordinated K·H2O water increased the probability of intermediate reactants interacting with the surface, thereby promoting efficient C-C coupling and enhancing the yield of C2+ products. These findings provide valuable insights into targeted design strategies for Cu catalysts used in the eCO2RR.

A theoretical study on hydrated sodium ion-phenylalanine clusters Na+(Phe)(H2O)n (n = 0-6; Phe = phenylalanine).

The cation-π interaction is of importance in many chemical and biological processes such as those involving protein geometries and functionals and ion channels. In this study, to understand the cation-π interaction between essential ions and protein in the water-aqueous environment, geometries, electronic structures, bonding properties, and dynamic stabilities of hydrated Na+-phenylalanine clusters Na+(Phe)(H2O)n (n = 0-6) were studied using density functional theory calculations and ab initio molecular dynamics simulations. After the addition of water molecules, Na+(Phe)(H2O)n structures change from a tridentate complex to quadridentate or pentadentate complexes while the cation-π interaction always exists. The fluctuation between quadridentate and pentadentate complexes results from the competition between cation-O bonding and hydrogen bonding. The charge analysis reveals that the positive charge is mainly located on the Na ion, whereas the further addition of water reduces the binding energy of water, electron affinity, and ionization potential. As the number of water molecules increases, the bonding interactions between the sodium ion and the remaining phenylalanine-water complex increase and correlate with the coordination number, in which the electrostatic interaction contributes more than the orbital interaction. The important orbital interaction terms come from the donation of the carboxyl and amino groups and water to the Na+ ion. Molecular dynamic simulations revealed that Na+(Phe)(H2O)6 is stable at 300 K.

Deep mineralization of VOCs in an embedded hybrid structure CoFe2O4/MoS2/PMS wet scrubber system.

Peroxymonosulfate (PMS)-based advanced oxidation processes in liquid phase systems can actively degrade toluene. In this work, the catechol structural surfactant was introduced to synthesize the dispersed and homogeneous CoFe2O4 nanospheres and embedded into MoS2 nanoflowers to form magnetically separable heterojunction catalysts. The innovative approach effectively mitigated the traditionally low reduction efficiency of transition metal ions during the heterogeneous activation process. In CoFe2O4/MoS2/PMS system, the toluene removal efficiency remained 95% within 2 h. The contribution of SO4⋅-, ·O2-, ·OH, and 1O2 was revealed by radical quenching experiment and electron paramagnetic resonance spectroscopy. The results illustrated that MoS2 offers ample reduction sites for facilitating PMS activation via Fe3+/Fe2+ redox interactions. Furthermore, an investigation into the toluene degradation pathway within the CoFe2O4/MoS2/PMS system revealed its capability to suppress the formation of toxic byproducts. This ambient-temperature liquid-phase method presented promising route for the removal of industrial volatile organic pollutants.

Controlled Growth Cu2S Nanoarrays with High-Performance Photothermal Properties.

The controlled growth of Cu2S nanoarrays was constructed by a facile two-step impregnation synthesis route. The as-synthesized Cu2S/CuO@Cu samples were precisely characterized in terms of surface morphology, phase, composition, and oxidation states. At the laser irradiation of 808 nm, Cu2S/CuO@Cu heated up to 106 °C from room temperature in 120 s, resulting in an excellent photothermal conversion performance. The Cu2S/CuO@Cu exhibited excellent cycling performance-sustaining the photothermal performance during five heating-cooling cycles. The finite difference time domain (FDTD) simulation of optical absorption and electric field distributions assured the accuracy and reliability of the developed experimental conditions for acquiring the best photothermal performance of Cu2S/CuO@Cu.

Wearable Noninvasive Glucose Sensor Based on CuxO NFs/Cu NPs Nanocomposites.

Designing highly active material to fabricate a high-performance noninvasive wearable glucose sensor was of great importance for diabetes monitoring. In this work, we developed CuxO nanoflakes (NFs)/Cu nanoparticles (NPs) nanocomposites to serve as the sensing materials for noninvasive sweat-based wearable glucose sensors. We involve CuCl2 to enhance the oxidation of Cu NPs to generate Cu2O/CuO NFs on the surface. Due to more active sites endowed by the CuxO NFs, the as-prepared sample exhibited high sensitivity (779 µA mM-1 cm-2) for noninvasive wearable sweat sensing. Combined with a low detection limit (79.1 nM), high selectivity and the durability of bending and twisting, the CuxO NFs/Cu NPs-based sensor can detect the glucose level change of sweat in daily life. Such a high-performance wearable sensor fabricated by a convenient method provides a facile way to design copper oxide nanomaterials for noninvasive wearable glucose sensors.

Vesicular self-assembly of copolymer-grafted nanoparticles with anisotropic shapes.

Plasmonic nanovesicles show broad applications in areas such as cancer theranostics and drug delivery, but the preparation of nanovesicles from shaped nanoparticles remains challenging. This article describes the vesicular self-assembly of shaped nanoparticles, such as gold nanocubes grafted with amphiphilic block copolymers, in selective solvents. The nanocubes assembled within the vesicular membranes exhibit two distinctive packing modes, namely square-like and hexagonal packing, depending on the relative dimensions of the copolymer ligands and nanocubes. The corresponding optical properties of the plasmonic nanovesicles can be tuned by varying the length of the grafted copolymers and the size of the nanocubes. This work provides guidance for the fabrication of functional plasmonic vesicles for applications in catalysis, nanomedicines and optical devices.

Geometries, electronic structures, and bonding properties of endohedral Group-14 Zintl clusters TM@E10 (TM = Fe, Co, Ni; E = Ge, Sn, Pb).

The geometries, electronic structures, and bonding properties of the title endohedral Zintl clusters have been studied by using ab initio calculations. [Fe@Ge10 ]4- and [Co@Ge10 ]3- have D5h -symmetric pentagonal prismatic structure and [Fe@Sn10 ]4- adopts the C2v -symmetric structure as their ground-state structures, whereas all the other clusters possess D4d bicapped square antiprismatic structures, in consistent with the experimental values when available. Natural bonding orbital and electron localization function disclosed that the negative charges are localized on the central atoms rather than the cages while the TME ionic bonding interactions increase in the order of Ge < Sn < Pb. The energy decomposition analysis revealed that the total bonding energy ∆Eint between central TM and E10 cage is above 150 kcal/mol. The ionic bonding interaction termed as electrostatic interaction ∆Eelstat increases in the order of Ge < Sn < Pb and becomes higher than the covalent bonding interactions termed as total orbital interactions ∆Eorb . Among the total orbital interactions, the π back donations from the TM-d orbitals to the empty cage orbitals consisting of E-p orbitals, the magnitude of which is importantly affected by the cage symmetry, are dominant contributions.

Endohedral group-14-element clusters TM@E9 (TM = Co, Ni, Cu; E = Ge, Sn, Pb) and their low-dimensional nanostructures: a first-principles study.

Endohedral group14-based clusters with the encapsulation of a transition metal, which are termed [TM@Em]n- (TM = transition metal and E = group-14 elements), have lots of potential applications and have been used as interesting building blocks in materials science. Nevertheless, their electronic structures and stability mechanism remain unclear. In this paper, we systematically study the geometries, electronic structures, and bonding properties of [TM@E9]n- clusters which are the smallest endohedral group-14-based clusters synthesized so far, by using density functional theory (DFT) calculations. The calculation results reveal the important role of TMs in affecting the structures and bonding interactions in the [TM@E9]n- cluster. In the presence of a TM, the cluster geometry could change from a monocapped square antiprism (C4v) for empty [E9]4- cages to a tricapped trigonal prismatic geometry (D3h) for [TM@E9]n-. By using the energy decomposition analysis (EDA) method, the bonding properties between the endohedral TM and E9 cluster have been thoroughly investigated. It was found that the origin of stability of these clusters is from the large electrostatic attraction with significantly reduced Pauli repulsion. In the case of orbital interactions, the π back-donations from d orbitals of the TM to the cluster make important contributions. More interestingly, the 1D-chain and 2D-sheet nanostructures based on the [Ni@E9] cluster have been theoretically predicted. The band structure and density of states analysis revealed that all of these nanostructures are metallic and their excellent thermodynamic stability has been confirmed by using ab initio molecular dynamics (AIMD) simulations.

CoFe Nanoparticle-Decorated Reduced Graphene Oxide for the Highly Efficient Reduction of 4-Nitrophenol.

High-performance, nonprecious metal catalysts with special morphologies and easy-to-recycle properties are essential for the treatment of environmental pollutants. Herein, CoFe nanoparticle-decorated reduced graphene oxide (RGO) catalysts were designed and successfully fabricated, and the catalyst was then used to reduce 4-nitrophenol into 4-aminophenol. Outstanding catalytic properties with a reduction rate constant of 4.613 min-1 were achieved due to the synergistic properties of the CoFe metal alloy and the high-conductivity RGO components in the catalysts. In addition, the catalyst was conveniently recovered via magnets due to its inherent magnetic properties. The facile preparation, outstanding catalytic performance, structural stability, and low material costs make the CoFe/RGO nanocatalyst a promising candidate for potential applications in catalysis.

Stable Noble Gas Compounds Based on Superelectrophilic Anions [B12 (BO)11 ]- and [B12 (OBO)11 ].

Superelectrophilic monoanions [B12 (BO)11 ]- and [B12 (OBO)11 ]- , generated from stable dianions [B12 (BO)12 ]2- and [B12 (OBO)12 ]2- , show great potential for binding with noble gases (Ngs). The binding energies, quantum theory of atoms in molecules (QTAIM), natural population analysis (NPA), energy decomposition analysis (EDA), and electron localization function (ELF) were carried out to understand the B-Ng bond in [B12 (BO)11 Ng]- and [B12 (OBO)11 Ng]- . The calculated results reveal that heavier noble gases (Ar, Kr, and Xe) bind covalently with both [B12 (BO)11 ]- and [B12 (OBO)11 ]- with large binding energies, making them potentially feasible to be synthesized. Only [B12 (OBO)11 ]- could form a covalent bond with helium or neon but the small binding energy of [B12 (OBO)11 He]- may pose a challenge for its experimental detection.

Stabilities, Electronic Structures, and Bonding Properties of 20-Electron Transition Metal Complexes (Cp)2TMO and their One-Dimensional Sandwich Molecular Wires (Cp = C5H5, C5(CH3)H4, C5(CH3)5; TM = Cr, Mo, W).

First-principles calculations have been carried out for the 20-electron transition metal complexes (Cp)2TMO and their molecular wires (Cp = C5H5, C5(CH3)H4, C5(CH3)5; TM = Cr, Mo, W). The calculation results at the BP86/def2-TZVPP level reveal that the ground state is singlet and the optimized geometries are in good agreement with the experimental values. The analysis of frontier molecular orbitals shows that two electrons in the highest occupied molecular orbital HOMO-1 are mainly localized on cyclopentadienyl and oxygen ligands. Furthermore, the nature of the TM-O bond was investigated with the energy decomposition analysis-natural orbitals for chemical valence (EDA-NOCV). The attraction term in the intrinsic interaction energies ΔEint is mainly composed of two important parts, including electrostatic interaction (about 52% of the total attractive interactions ΔEelstat + ΔEorb) and orbital interaction, which might be the major determinant of the stability of these (Cp)2TMO complexes. All of the TM-O bonds should be described as electron-sharing σ single bonds [(Cp)2TM]+-[O]- with the contribution of 53-57% of ΔEorb and two π backdonations from the occupied p orbitals of oxygen ligands into vacant π* MOs of the [(Cp)2TM]+ fragments, which are 35-40% of ΔEorb. The results of bond order and interaction energy from EDA-NOCV calculations suggest the influence of the radius of TM and methyl in the interactions between TM and O in (Cp)2TMO. Additionally, the relativistic effects slightly amplify the strength of bonding with increasing ΔEorb for the EDA-NOCV calculations on three metal complexes (C5H5)2TMO. Finally, the geometries, electronic structures, and magnetics of infinitely extended systems, [(C5H5)TMO]∞, have also been explored. The results of the density of states (DOS) and band structure revealed that [(C5H5)CrO]∞ and [(C5H5)WO]∞ are semiconductors with the narrow bands, whereas [(C5H5)MoO]∞ behaves as metal.

Stabilities, Electronic Structures, and Bonding Properties of Iron Complexes (E1E2)Fe(CO)2(CNArTripp2)2 (E1E2=BF, CO, N2, CN-, or NO+).

The coordination of 10-electron diatomic ligands (BF, CO N2) to iron complexes Fe(CO)2(CNArTripp2)2 [ArTripp2=2,6-(2,4,6-(iso-propyl)3C6H2)2C6H3] have been realized in experiments very recently (Science, 2019, 363, 1203-1205). Herein, the stability, electronic structures, and bonding properties of (E1E2)Fe-(CO)2(CNArTripp2)2 (E1E2=BF, CO, N2, CN-, NO+) were studied using density functional (DFT) calculations. The ground state of all those molecules is singlet and the calculated geometries are in excellent agreement with the experimental values. The natural bond orbital analysis revealed that Fe is negatively charged while E1 possesses positive charges. By employing the energy decomposition analysis, the bonding nature of the E2E1-Fe(CO)2(CNArTripp2)2 bond was disclosed to be the classic dative bond E2E1→Fe(CO)2(CNArTripp2)2 rather than the electron-sharing double bond. More interestingly, the bonding strength between BF and Fe(CO)2(CNArTripp2)2 is much stronger than that between CO (or N2) and Fe(CO)2(CNArTripp2)2, which is ascribed to the better σ-donation and π back-donations. However, the orbital interactions in CN-→Fe(CO)2(CNArTripp2)2 and NO+→Fe(CO)2(CNArTripp2)2 mainly come from σ-donation and π back-donation, respectively. The different contributions from σ donation and π donation for different ligands can be well explained by using the energy levels of E1E2 and Fe(CO)2(CNArTripp2)2 fragments.

Wearable, stable, highly sensitive hydrogel-graphene strain sensors.

A stable and highly sensitive graphene/hydrogel strain sensor is designed by introducing glycerol as a co-solvent in the formation of a hydrogel substrate and then casting a graphene solution onto the hydrogel in a simple, two-step method. This hydrogel-based strain sensor can effectively retain water in the polymer network due to the formation of strong hydrogen bonding between glycerol and water. The addition of glycerol not only enhances the stability of the hydrogel over a wider temperature range, but also increases the stretchability of the hydrogel from 800% to 2000%. The enhanced sensitivity can be attributed to the graphene film, whereby the graphene flakes redistribute to optimize the contact area under different strains. The careful design enables this sensor to be used in both stretching and bending modes. As a demonstration, the as-prepared strain sensor was applied to sense the movement of finger knuckles. Given the outstanding performance of this wearable sensor, together with the proposed scalable fabrication method, this stable and sensitive hydrogel strain sensor is considered to have great potential in the field of wearable sensors.

Ion-Induced Synthesis of Alginate Fibroid Hydrogel for Heavy Metal Ions Removal.

Design and synthesis of environmentally friendly adsorbents with high adsorption capacities are urgently needed to control pollution of water resources. In this work, a calcium ion-induced approach was used to synthesize sodium alginate fibroid hydrogel (AFH). The as-prepared AFH has certain mechanical strength, and the mechanical strength is enhanced especially after the adsorption of heavy metal ions, which is very convenient for the recovery. AFH exhibited excellent adsorption performances for Cu2+, Cd2+, and Pb2+ ions and displayed very high saturated adsorption capacities (Qe) of 315.92 mg·g-1 (Cu2+), 232.35 mg·g-1 (Cd2+), and 465.22 mg·g-1 (Pb2+) with optimized pH values (3.0-4.0) and temperature (303 K). The study of isotherms and kinetics indicated that adsorption processes of heavy metal ions fitted well with the pseudo-second-order kinetics model and the Langmuir model. Pb2+ was found to have the strongest competitiveness among the three heavy metal ions. Thus, AFH has great application prospects in the field of heavy metal ions removing from wastewater.

Mesocrystals for photocatalysis: a comprehensive review on synthesis engineering and functional modifications.

Mesocrystals are a new class of superstructures that are generally made of crystallographically highly ordered nanoparticles and could function as intermediates in a non-classical particle-mediated aggregation process. In the past decades, extensive research interest has been focused on the structural and morphogenetic aspects, as well as the growth mechanisms, of mesocrystals. Unique physicochemical properties including high surface area and ordered porosity provide new opportunities for potential applications. In particular, the oriented interfaces in mesocrystals are considered to be beneficial for effective photogenerated charge transfer, which is a promising photocatalytic candidate for promoting charge carrier separation. Only recently, remarkable advances have been reported with a special focus on TiO2 mesocrystal photocatalysts. However, there is still no comprehensive overview on various mesocrystal photocatalysts and their functional modifications. In this review, different kinds of mesocrystal photocatalysts, such as TiO2 (anatase), TiO2 (rutile), ZnO, CuO, Ta2O5, BiVO4, BaZrO3, SrTiO3, NaTaO3, Nb3O7(OH), In2O3-x (OH) y , and AgIn(WO4)2, are highlighted based on the synthesis engineering, functional modifications (including hybridization and doping), and typical structure-related photocatalytic mechanisms. Several current challenges and crucial issues of mesocrystal-based photocatalysts that need to be addressed in future studies are also given.

Rapid Self-Recoverable Hydrogels with High Toughness and Excellent Conductivity.

Hydrogels as soft and wet materials have attracted much attention in sensing and flexible electronics. However, traditional hydrogels are fragile or have unsatisfactory recovery capability, which largely limit their applications. Here, a novel hydrogen bond based sulfuric acid-poly(acrylic acid) (PAA)/poly(vinyl alcohol) physical hydrogel is developed for addressing the above drawbacks. Sulfuric acid serves two functions: one is to inhibit the ionization of carboxyl groups from PAA chains to form more hydrogen bonds and the other is to provide conductive ions to promote conductivity of hydrogel. Consequently, the hydrogel obtains comprehensive mechanical properties, including extremely rapid self-recovery (strain = 1, instantly self-recover; strain = 20, self-recover within 10 min), high fracture strength (3.1 MPa), and high toughness (18.7 MJ m-3). In addition, we demonstrate this hydrogel as a stretchable ionic cable and pressure sensor to exhibit stable operation after repeated loadings. This work provides a new concept to synthesize physical hydrogels, which will hopefully expand applications of hydrogel in stretchable electronics.

Surfactant-free synthesis of Cu2O yolk-shell cubes decorated with Pt nanoparticles for enhanced H2O2 detection.

Pt decorated yolk-shell Cu2O cubes are obtained using a surfactant-free and multiple-step method. Porous yolk-shell cubic structures, together with synergistic effects between Pt and Cu2O, endow the yolk-shell Pt-Cu2O based nonenzymatic H2O2 sensors with enhanced sensing performance.

A sensitive electrochemical nonenzymatic biosensor for the detection of H2O2 released from living cells based on ultrathin concave Ag nanosheets.

Facile synthesis of ultrathin two-dimensional metallic nanosheets with special physical and chemical properties is still challenging. In this work, ultrathin silver nanosheets were synthesized through the galvanic replacement reaction between silver nitrate and Cu microcages without using any surfactant at room temperature. The as-prepared Ag nanosheets (NSs) were concave and had a thickness of sub-10 nm. And the nanosheets exhibited excellent H2O2 detection property with a high sensitivity of about 320.3 uA mM-1 cm-2 and a low detection limit of 0.17 µM in a wide linear range of 5-6000 µM, and a fast response time (less than 2 s). Besides, the real-time detection of H2O2 induced from living HeLa and SH-SY5Y cells were also achieved, indicating the potential application of as-prepared Ag NSs in monitoring physiological and dynamic in-clinic pathological processes.

Diversified copper sulfide (Cu2-xS) micro-/nanostructures: a comprehensive review on synthesis, modifications and applications.

As a significant metal chalcogenide, copper sulfide (Cu2-xS, 0 < x < 1), with a unique semiconducting and nontoxic nature, has received significant attention over the past few decades. Extensive investigations have been employed to the various Cu2-xS micro-/nanostructures owing to their excellent optoelectronic behavior, potential thermoelectric properties, and promising biomedical applications. As a result, micro-/nanostructured Cu2-xS with well-controlled morphologies, sizes, crystalline phases, and compositions have been rationally synthesized and applied in the fields of photocatalysis, energy conversion, in vitro biosensing, and in vivo imaging and therapy. However, a comprehensive review on diversified Cu2-xS micro-/nanostructures is still lacking; therefore, there is an imperative need to thoroughly highlight the new advances made in function-directed Cu2-xS-based nanocomposites. In this review, we have summarized the important progress made in the diversified Cu2-xS micro-/nanostructures, including that in the synthetic strategies for the preparation of 0D, 1D, 2D, and 3D micro-/nanostructures (including polyhedral, hierarchical, hollow architectures, and superlattices) and in the development of modified Cu2-xS-based composites for enhanced performance, as well as their various applications. Furthermore, the present issues and promising research directions are briefly discussed.

Effect of interface on epitaxy and magnetism in h-RFeO3/Fe3O4/Al2O3 films (R = Lu, Yb).

We have carried out the growth of h-RFeO3 (0 0 1) (R = Lu, Yb) thin films on Fe3O4 (1 1 1)/Al2O3 (0 0 1) substrates, and studied the effect of the h-RFeO3 (0 0 1)/Fe3O4 (1 1 1) interfaces on the epitaxy and magnetism. The observed epitaxial relations between h-RFeO3 and Fe3O4 indicate an unusual matching of Fe sub-lattices rather than a matching of O sub-lattices. The out-of-plane direction was found to be the easy magnetic axis for h-YbFeO3 (0 0 1) but the hard axis for Fe3O4 (1 1 1) in the h-YbFeO3 (0 0 1)/Fe3O4 (1 1 1)/Al2O3 (0 0 1) films, suggesting a perpendicular magnetic alignment at the h-YbFeO3 (0 0 1)/Fe3O4 (1 1 1) interface. These results indicate that Fe3O4 (1 1 1)/Al2O3 (0 0 1) could be a promising substrate for epitaxial growth of h-RFeO3 films of well-defined interface and for exploiting their spintronic properties.