Simulation for efficiency improvement of a thuilium Q-switched ytterbium-doped all-fiber laser.

We theoretically explore the mechanism in a thulium Q-switched ytterbium-doped all-fiber fiber laser using a set of rate equations to model the correlations between the photons and the five energy levels of thulium involved in the Q switching mechanism. We demonstrate that by coupling with a gain-switched resonator, the Q-switched laser is stabilized up to the maximum pulsing rate that is limited by the lifetime of level 3H5. To the best of our knowledge, this is the first study that revealed that level 3H5 plays an essential role in reinitialization, achieving sequential pulses, and limiting the maximum repetition rate.

Electrodes Donate Electrons for Nitrate Reduction in a Soil Matrix via DNRA and Denitrification.

Microbial strains and indigenous microbiota in soil slurries have been reported to use electrons from electrodes for nitrate (NO3-) reduction. However, few studies have confirmed this in a soil matrix hitherto. This study investigated if, and how, an electric potential affected NO3- reduction in a soil matrix. The results showed that, compared to a control treatment, applying an electric potential of -0.5 V versus the standard hydrogen electrode (SHE) significantly increased the relative abundance of NO3--reducing microbes (e.g., Alcaligenaceae and Pseudomonadaceae) and the abundances of the nrfA, nirK, nirS, and nosZ genes in soil matrices. Meanwhile, the electric potential treatment doubled the NO3- reduction rate and significantly increased the rates of production of ammonium (NH4+), dinitrogen (N2), and nitrous oxide (N2O). The amount of NO3--N reduced under the electric potential treatment was comparable to the sum of the amounts of N observed in the increased N2O, N2, NH4+, and nitrite (NO2-) pools. An open-air experiment showed that the electric potential treatment promoted soil NO3- reduction with a spatial scale of at least 38 cm. These results demonstrated that an electric potential treatment could enhance NO3- reduction via both denitrification and dissimilatory NO3- reduction to ammonium (DNRA) in the soil matrix. The mechanisms revealed in this study have implications for the future development of potential techniques for enhancing NO3- reduction in the vadose zone and consequently reducing the risk of NO3- leaching.

Novel Gas Diffusion Cloth Bioanodes for High-Performance Methane-Powered Microbial Fuel Cells.

Microbial fuel cells (MFCs) are a promising technology that converts chemical energy into electricity. However, up to now only few MFCs have been powered by gas fuels, such as methane, and their limited performance is still challenged by the low solubility and bioavailability of gases. Here, we developed a gas diffusion cloth (GDC) anode to significantly enhance the performance of methane-powered MFCs. The GDC anode was constructed by simply coating waterproof GORE-TEX cloth with conductive carbon cloth in one step. After biofilm enrichment, the GDC anodes obtained a methane-dependent current up to 1130.2 mA m-2, which was 165.2 times higher than conventional carbon cloth (CC) anodes. Moreover, MFCs equipped with GDC anodes generated a maximum power density of 419.5 mW m-2. Illumina high-throughput sequencing revealed that the GDC anode biofilm was dominated mainly by Geobacter, in contrast with the most abundant Methanobacterium in planktonic cells. It is hypothesized that Methanobacterium reversed the methanogenesis process by transferring electrons to the anodes, and Geobacter generated electricity via the intermediates (e.g., acetate) of anaerobic methane oxidation. Overall, this work provides an effective route in preparing facile and cost-effective anodes for high-performance methane MFCs.