Planar defect-free pure red perovskite light-emitting diodes via metastable phase crystallization.

Solution-processable all-inorganic CsPbI3-xBrx perovskite holds great potential for pure red light-emitting diodes. However, the widely existing defects in this mixed halide perovskite markedly limit the efficiency and stability of present light-emitting diode devices. We here identify that intragrain Ruddlesden-Popper planar defects are primary forms of such defects in the CsPbI3-xBrx thin film owing to the lattice strain caused by inhomogeneous halogen ion distribution. To eliminate these defects, we develop a stepwise metastable phase crystallization strategy to minimize the CsPbI3-xBrx perovskite lattice strain, which brings planar defect-free CsPbI3-xBrx thin film with improved radiative recombination, narrowed emission band, and enhanced spectral stability. Using these high-quality thin films, we fabricate spectrally stable pure red perovskite light-emitting diodes, showing 17.8% external quantum efficiency and 9000 candela meter-2 brightness with color coordinates required by Rec. 2020.

Spectrally Stable and Efficient Pure Red CsPbI3 Quantum Dot Light-Emitting Diodes Enabled by Sequential Ligand Post-Treatment Strategy.

Metal halide perovskites are promising semiconductors for next-generation light-emitting diodes (LEDs) due to their high luminance, excellent color purity, and handily tunable band gap. However, it remains a great challenge to develop perovskite LEDs (PeLEDs) with pure red emission at the wavelength of 630 nm. Herein, we report a spectrally stable and efficient pure red PeLED by employing sequential ligand post-treated CsPbI3 quantum dots (QDs). The synthesized CsPbI3 QDs with a size of ∼5 nm are treated in sequential steps using the ligands of 1-hydroxy-3-phenylpropan-2-aminium iodide (HPAI) and tributylsulfonium iodide (TBSI), respectively. The CsPbI3 QD films exhibit improved optoelectronic properties, which enables the fabrication of a pure red PeLED with a peak external quantum efficiency (EQE) of 6.4% and a stable EL emission centered at the wavelength of 630 nm. Our reported sequential ligand post-treatment strategy opens a new route to improve the stability and efficiency of PeLEDs based on QDs.

Chiral Phosphine-Copper Iodide Hybrid Cluster Assemblies for Circularly Polarized Luminescence.

Chiral chromophores and their ordered assemblies are intriguing for yielding circularly polarized luminescence (CPL) and exploring intrinsic structure-light emission relationships. With the extensively studied chiral organic molecules and inorganic nanoparticle assemblies for the amplified CPL, the assemblies of copper halide hybrid clusters have attracted intensive attention due to their potential efficient CPL. Here, we report robust chiral phosphine-copper iodide hybrid clusters and their layered assemblies in crystalline states for amplified CPL. We reveal that the intermolecular interactions endow the clusters with the capability of assembling into chiral crystalline CPL materials, including hexagonal platelet-shaped microcrystals (glum ≈ 9.5 × 10-3) and highly oriented crystalline films (glum ≈ 5 × 10-3). Owing to the high crystalline feature of the thin film, we demonstrate an electroluminescent device with bright electroluminescence (1200 cd m-2).

Bright and Near-Unity Polarized Light Emission Enabled by Highly Luminescent Cu2I2-Dimer Cluster-Based Hybrid Materials.

As one fundamental property of light, polarization has a huge impact in quantum optics and optoelectronics through light-matter interactions. However, the bright and near-unity polarized light emissions in the visible range by solid crystalline materials are scantly realized. Here, we report well-defined quasi two-dimensional (2D) hybrid crystals based on the linear alignment of Cu2I2-dimer/bidentate ligand hybrid clusters for achieving bright and near-unity linearly polarized light emissions. Using first-principle calculations, we demonstrate that the superaligned transition dipole moments are the key for the observed excellent polarized light emissions. To further enhance the photoluminescence (PL) polarization degree, we fabricate Cu2I2-dimer-based hybrid nanobelts, which display high PL quantum yield (up to 64%) and ultrahigh PL polarization degree (∼0.99). Our reported copper iodine cluster-based luminescent hybrid materials for bright and highly polarized light emissions will have great potential for future quantum optics applications.

Modulation of Metal Halide Structural Units for Light Emission.

ConspectusWith the development of solid-state lighting technology, efficient light sources that combine high brightness, wide range, and good stability are in high demand for next-generation lighting and displays. Metal halides are emerging as promising luminescent materials due to their versatility for desirable light emission manipulations. This is because the optical activity of the metal halide material depends on the metal halide structural unit and the organic ions or coordinated organic ligands. The different assembly of metal halide units and organic parts can enable versatile light emissions, such as lead halide perovskites (LHPs) and copper halide-organic hybrids. Impressively, the external quantum efficiency of the LHP based light-emitting diodes (LEDs) has improved significantly from 0.1% to over 20% in just five years. With this great progress, the structural lability and toxicity of the LHPs are now the critical issues that need to be addressed for practical applications. These issues are mainly rooted in the intrinsic lead composition and low formation energy crystal structure of the widely adopted LHPs. Thus, the modulation of the structure and composition of the basic metal halide structural units is considered a rational strategy to address these issues.In this Account, we will present a general material design using metal halide structural units as basic building blocks to build up metal halide luminescent materials for solid-state lighting devices. Following this route, we will emphasize the modulation of metal halide structural units to tackle the existing challenges in lead halides, including the instability of crystalline structure, ion migration, and the presence of toxic lead. Considering basic components in structural units, we will highlight ionic engineering in LHPs via ion doping, substitution, and modification to enhance the crystal structural stability and suppress ion migration. To replace toxic lead, we will introduce recent advances in the modulation of lead-free halide structural units by active ion doping and organic ligand coordination to fabricate highly luminescent materials. Finally, we will present future strategies of metal halide structural unit modulation for solid-state light emissions. We hope this Account will provide new insights for designing metal halide materials from the viewpoint of the modulation of the basic building blocks and inspire future studies of advanced metal halide materials for solid-state light emitting applications.

Suppressing Auger Recombination in Cesium Lead Bromide Perovskite Nanocrystal Film for Bright Light-Emitting Diodes.

All-inorganic cesium lead halide perovskite colloidal nanocrystals are attractive for next-generation light-emitting diodes because of their high color purity, but the nonradiative Auger recombination in perovskite nanocrystal film limits the efficiency and brightness of the fabricated devices. Here, we introduce a surface-engineering process to exchange the original long-chain oleic acid/oleylamine ligands by the cerium-tributylphosphine oxide hybrid ligands to suppress nonradiative Auger recombination in CsPbBr3 NC film for bright and low-efficiency roll-off light-emitting diodes. Using ultrafast transient absorption and time-resolved photoluminescence spectroscopy, we demonstrate that the hybrid ligand passivation can efficiently remove surface trap states to enhance radiative recombination and homogenize the exciton concentration to suppress nonradiative Auger recombination in the CsPbBr3 nanocrystal thin film. Consequently, we fabricate a light-emitting diode with efficient charge injection into the CsPbBr3 nanocrystal emitting layer, achieving a pronounced improvement of electroluminescence with an external quantum efficiency from 5.5% to 9.1%. More importantly, the efficiency roll-off characteristics of high-brightness light-emitting diodes is effectively mitigated. Our reported hybrid ligand passivation suppressed Auger recombination strategy shows a great potential for fabricating high-brightness cesium lead halide perovskite light-emitting diodes.

Metal chloride perovskite thin film based interfacial layer for shielding lithium metal from liquid electrolyte.

Fabricating a robust interfacial layer on the lithium metal anode to isolate it from liquid electrolyte is vital to restrain the rapid degradation of a lithium metal battery. Here, we report that the solution-processed metal chloride perovskite thin film can be coated onto the lithium metal surface as a robust interfacial layer to shield the lithium metal from liquid electrolyte. Via phase analysis and density functional theory calculations, we demonstrate that the perovskite layer can allow fast lithium ion shuttle under a low energy barrier of 0.45 eV without the collapse of framework. Such perovskite modification can realize stable cycling of LiCoO2|Li cells with an areal capacity of 2.8 mAh cm-2 using thin lithium metal foil (50 µm) and limited electrolyte (20 µl mAh-1) for over 100 cycles at 0.5 C. The metal chloride perovskite protection strategy could open a promising avenue for advanced lithium metal batteries.

Highly Luminescent Copper Iodide Cluster Based Inks with Photoluminescence Quantum Efficiency Exceeding 98.

Highly luminescent inks are desirable for various applications such as decorative coating, art painting, and anticounterfeiting, to name a few. However, present inks display low photoluminescent efficiency requiring a strong excitation light to make them glow. Here, we report a highly luminescent ink based on the copper-iodide/1-Propyl-1,4-diazabicyclo[2.2.2]octan-1-ium (Cu4I6(pr-ted)2) hybrid cluster with a quantum efficiency exceeding 98%. Under the interaction between the Cu4I6(pr-ted)2 hybrid cluster and polyvinylpyrrolidone (PVP), the highly luminescent Cu4I6(pr-ted)2/PVP ink can be facilely prepared via the one-pot solution synthesis. The obtained ink exhibits strong green light emission that originates from the efficient phosphorescence of Cu4I6(pr-ted)2 nanocrystals. Attractively, the ink displays high conversion efficiency for the ultraviolet light to bright green light emission due to its wide Stokes shift, implying great potential for anticounterfeiting and luminescent solar concentrator coating.

Potassium Bromide Surface Passivation on CsPbI3-xBrx Nanocrystals for Efficient and Stable Pure Red Perovskite Light-Emitting Diodes.

All-inorganic lead halide perovskite nanocrystals (NCs) are potential candidates for fabricating high-performance light-emitting diodes (LEDs) owing to their precisely tunable bandgaps, high photoluminescence (PL) efficiency, and excellent color purities. However, the performance of pure red (630-640 nm) all-inorganic perovskite LEDs is still limited by the halide segregation-induced instability of the electroluminescence (EL) of mixed halide CsPbI3-xBrx NCs. Herein, we report an effective approach to improving the EL stability of pure red all-inorganic CsPbI3-xBrx NC-based LEDs via the passivation of potassium bromide on NCs. By adding potassium oleate to the reaction system, we obtained potassium bromide surface-passivated (KBr-passivated) CsPbI3-xBrx NCs with pure red PL emission and a photoluminescence quantum yield (PLQY) exceeding 90%. We determine that most potassium ions present on the surface of NCs bind with bromide ions and thus demonstrate that potassium bromide surface passivation of NCs can both improve the PL stability and inhibit the halide segregation of NCs. Using KBr-passivated CsPbI3-xBrx NCs as an emitting layer, we fabricated stable and pure red perovskite LEDs with emission at 637 nm, showing a maximum brightness of 2671 cd m-2, maximum external quantum efficiency of 3.55%, and good EL stability. The proposed KBr-passivated NC strategy will open a new avenue for fabricating efficient, stable, and tunable pure color perovskite NC LEDs.

General Synthesis of Lead-Free Metal Halide Perovskite Colloidal Nanocrystals in 1-Dodecanol.

Lead halide perovskite nanocrystals (NCs) exhibit great application potential in optoelectronic devices because of their tunable band gaps and facile colloidal synthesis, but they suffer from serious lead toxicity and instability. It is highly desirable to substitute lead with other elements to acquire nontoxic and environmentally friendly lead-free perovskite NCs for optoelectronic devices. Here, we report a general method for the colloidal synthesis of a series of bismuth/antimony-based halide perovskite NCs with various constituents and optical band gaps from 1.97 to 3.15 eV. In our proposed synthetic system, 1-dodecanol is adopted as the solvent instead of the conventionally used 1-octadecene to realize size controllability of bismuth/antimony-based metal halide perovskite NCs. It is found that 1-dodecanol can act as a surfactant to tightly adsorb on the surface of bismuth/antimony-based halide perovskite NCs, enabling their small sizes (∼2 nm) and high dispersibility. Simultaneously, the band gaps of bismuth/antimony-based halide (A3B2X9, where A = CH3NH3, Cs, or Rb, B = Bi or Sb, and X = Cl, Br, or I) perovskite NCs can be systematically tuned by the atomic substitution of A, B, or X lattice sites. Moreover, to show the optoelectronic application potential of these lead-free halide perovskite NCs, a solar cell based on colloidal Cs3Bi2I9 perovskite NCs is demonstrated. The developed colloidal synthesis of bismuth/antimony-based halide NCs in 1-dodecanol will offer an alternative route to fabricating lead-free halide perovskite optoelectronic devices.

Few-Nanometer-Sized α-CsPbI3 Quantum Dots Enabled by Strontium Substitution and Iodide Passivation for Efficient Red-Light Emitting Diodes.

Cubic phase CsPbI3 quantum dots (α-CsPbI3 QDs) as a newly emerging type of semiconducting QDs hold tremendous promise for fundamental research and optoelectronic device applications. However, stable and sub-5 nm-sized α-CsPbI3 QDs have rarely been demonstrated so far due to their highly labile ionic structure and low phase stability. Here, we report a novel strontium-substitution along with iodide passivation strategy to stabilize the cubic phase of CsPbI3, achieving the facile synthesis of α-CsPbI3 QDs with a series of controllable sizes down to sub-5 nm. We demonstrate that the incorporation of strontium ions can significantly increase the formation energies of α-CsPbI3 QDs and hence reduce the structure distortion to stabilize the cubic phase at the few-nanometer size. The size ranging from 15 down to sub-5 nm of as-prepared stable α-CsPbI3 QDs allowed us to investigate their unique size-dependent optical properties. Strikingly, the few-nanometer-sized α-CsPbI3 QDs turned out to retain high photoluminescence and highly close packing in solid state thin films, and the fabricated red light emitting diodes exhibited high brightness (1250 cd m-2 at 9.2 V) and good operational stability (L50 > 2 h driven by 6 V). The developed cation-substitution strategy will provide an alternative method to prepare uniform and finely size-controlled colloidal lead halide perovskite QDs for various optoelectronic applications.

High-Performance Photocoupler Based on Perovskite Light Emitting Diode and Photodetector.

Photocoupler is a kind of semiconductor optoelectronic device that integrates light-emitting device (LED) and photodetector. It has found wide application in various fields because of its capability to transmit the electrical signal through the conversion of the electricity-light-electricity. Herein, we report the fabrication of a new photocoupler by simply integrating perovskite quantum dots LED and perovskite photodetector on a glass substrate. The as-fabricated photocoupler showed outstanding characteristics with high current transfer ratio (CTR) of 3.35%, which is highly competitive in comparison with other materials based devices. Furthermore, the perovskite photocoupler had a fast response speed of 8 µs/8.26 µs. By further adding an amplification circuit, the CTR could be enhanced by around 50 times to 172.6%. These results indicate that the present perovskite-based photocouplers may find potential application in future integrated circuit and optoelectronic system.

Room temperature precipitated dual phase CsPbBr3-CsPb2Br5 nanocrystals for stable perovskite light emitting diodes.

Although the efficiency of metal halide perovskite light emitting diodes (PeLEDs) has been improved to an attractive level, the poor stability of perovskite emitting layers is a major concern for the application of PeLEDs. Herein, we report a facile ligand-assisted precipitation synthesis of stable dual-phase CsPbBr3-CsPb2Br5 nanocrystals (NCs) for improving the stability of PeLEDs. In our synthetic process, the bromide-rich circumstance is beneficial to generate high quality dual-phase perovskite NCs with PLQY as high as 92% and a narrow emission linewidth (19 nm). More importantly, as-synthesized dual phase perovskite NCs exhibit extremely high thermal stability in heating tests in air with a considerable humidity of 30%-55% in comparison with previously reported single phase CsPbBr3 NCs. The aforementioned advantages of our synthesized dual-phase CsPbBr3-CsPb2Br5 NCs allow for the fabrication of light emitting layers of PeLEDs under ambient conditions. The fabricated green PeLED based on CsPbBr3-CsPb2Br5 NCs shows a low turn-on voltage of 2.5 V and a high brightness of 8383 cd m-2 at 8 V. Owing to the high stability of dual-phase CsPbBr3-CsPb2Br5 NCs, the fabricated PeLED also exhibits better operational stability in comparison with those PeLEDs based on single phase CsPbBr3 NCs. Our work presents a new route to fabricate stable perovskite light-emitting diodes using room temperature precipitated dual-phase CsPbBr3-CsPb2Br5 NCs as emitting layer materials.

Highly Luminescent Inks: Aggregation-Induced Emission of Copper-Iodine Hybrid Clusters.

Aggregation-induced emission (AIE) is an attractive phenomenon in which materials display strong luminescence in the aggregated solid states rather than in the conventional dissolved molecular states. However, highly luminescent inks based on AIE are hard to be obtained because of the difficulty in finely controlling the crystallinity of AIE materials at nanoscale. Herein, we report the preparation of highly luminescent inks via oil-in-water microemulsion induced aggregation of Cu-I hybrid clusters based on the highly soluble copper iodide-tris(3-methylphenyl)phosphine (Cu4 I4 (P-(m-Tol)3 )4 ) hybrid. Furthermore, we can synthesize a series of AIE inks with different light-emission colors to cover the whole visible spectrum range via a facile ligand exchange processes. The assemblies of Cu-I hybrid clusters with AIE characteristics will pave the way to fabricate low-cost highly luminescent inks.

Ce3+-Doping to Modulate Photoluminescence Kinetics for Efficient CsPbBr3 Nanocrystals Based Light-Emitting Diodes.

Inorganic perovskite CsPbBr3 nanocrystals (NCs) are emerging, highly attractive light emitters with high color purity and good thermal stability for light-emitting diodes (LEDs). Their high photo/electroluminescence efficiencies are very important for fabricating efficient LEDs. Here, we propose a novel strategy to enhance the photo/electroluminescence efficiency of CsPbBr3 NCs through doping of heterovalent Ce3+ ions via a facile hot-injection method. The Ce3+ cation was chosen as the dopant for CsPbBr3 NCs by virtue of its similar ion radius and formation of higher energy level of conduction band with bromine in comparison with the Pb2+ cation to maintain the integrity of perovskite structure without introducing additional trap states. It was found that by increasing the doping amount of Ce3+ in CsPbBr3 NCs to 2.88% (atomic percentage of Ce compared to Pb) the photoluminescence quantum yield (PLQY) of CsPbBr3 NCs reached up to 89%, a factor of 2 increase in comparison with the native, undoped ones. The ultrafast transient absorption and time-resolved photoluminescence (PL) spectroscopy revealed that Ce3+-doping can significantly modulate the PL kinetics to enhance the PL efficiency of doped CsPbBr3 NCs. As a result, the LED device fabricated by adopting Ce3+-doped CsPbBr3 NCs as the emitting layers exhibited a pronounced improvement of electroluminescence with external quantum efficiency (EQE) from 1.6 to 4.4% via Ce3+-doping.