Studying the small extracellular vesicle capture efficiency of magnetic beads coated with tannic acid.

The isolation of small extracellular vesicles (sEVs), including those secreted by pathological cells, with high efficiency and purity is highly demanded for research studies and practical applications. Conventional sEV isolation methods suffer from low yield, presence of contaminants, long-term operation and high costs. Bead-assisted platforms are considered to be effective for trapping sEVs with high recovery yield and sufficient purity for further molecular profiling. In this study, magnetically responsive beads made of calcium carbonate (CaCO3) particles impregnated with iron oxide (Fe3O4) nanoparticles are fabricated using a freezing-induced loading (FIL) method. The developed magnetic beads demonstrate sufficient magnetization and can be collected by a permanent magnet, ensuring their rapid and gentle capture from an aqueous solution. The tannic acid on the surface of magnetic beads is formed by a layer-by-layer (LbL) method and is used to induce coupling of sEVs with the surface of magnetic beads. These tannic acid coated magnetic beads (TAMB) were applied to capture sEVs derived from MCF7 and HCT116 cell lines. Quantitative data derived from nanoparticle tracking analysis (NTA) and BCA methods revealed the capture efficiency and recovery yield of about 60%. High-resolution transmission electron microscopy (HRTEM) imaging of sEVs on the surface of TAMBs indicated their structural integrity. Compared with the size exclusion chromatography (SEC) method, the proposed approach demonstrated comparable efficiency in terms of recovery yield and purity, while offering a relatively short operation time. These results highlight the high potential of the TAMB approach for the enrichment of sEVs from biological fluids, such as cell culture media.

Barnase encapsulation into submicron porous CaCO3 particles: studies of loading and enzyme activity.

The present study focuses on the immobilization of the bacterial ribonuclease barnase (Bn) into submicron porous calcium carbonate (CaCO3) particles. For encapsulation, we apply adsorption, freezing-induced loading and co-precipitation methods and study the effects of adsorption time, enzyme concentration and anionic polyelectrolytes on the encapsulation efficiency of Bn. We show that the use of negatively charged dextran sulfate (DS) and ribonucleic acid from yeast (RNA) increases the loading capacity (LC) of the enzyme on CaCO3 particles by about 3-fold as compared to the particles with Bn itself. The ribonuclease (RNase) activity of encapsulated enzyme depends on the LC of the particles and transformation of metastable vaterite to stable calcite, as studied by the assessment of enzyme activities in particles.

Air-Filled Microbubbles Based on Albumin Functionalized with Gold Nanocages and Zinc Phthalocyanine for Multimodal Imaging.

Microbubbles are intravascular contrast agents clinically used in diagnostic sonography, echocardiography, and radiology imaging applications. However, up to date, the idea of creating microbubbles with multiple functionalities (e.g., multimodal imaging, photodynamic therapy) remained a challenge. One possible solution is the modification of bubble shells by introducing specific compounds responsible for such functions. In the present work, air-core microbubbles with the shell consisting of bovine serum albumin, albumin-coated gold nanocages, and zinc phthalocyanine were prepared using the sonication method. Various physicochemical parameters such as stability over time, size, and concentration were investigated to prove the potential use of these microbubbles as contrast agents. This work shows that hybrid microbubbles have all the necessary properties for multimodal imaging (ultrasound, raster-scanning microscopy, and fluorescence tomography), which demonstrate superior characteristics for potential theranostic and related biomedical applications.

SERS Platform Based on Hollow-Core Microstructured Optical Fiber: Technology of UV-Mediated Gold Nanoparticle Growth.

Surface-enhanced Raman spectroscopy (SERS) is a powerful technique for biosensing. However, SERS analysis has several concerns: the signal is limited by a number of molecules and the area of the plasmonic substrate in the laser hotspot, and quantitative analysis in a low-volume droplet is confusing due to the change of concentration during quick drying. The usage of hollow-core microstructured optical fibers (HC-MOFs) is thought to be an effective way to improve SERS sensitivity and limit of detection through the effective irradiation of a small sample volume filling the fiber capillaries. In this paper, we used layer-by-layer assembly as a simple method for the functionalization of fiber capillaries by gold nanoparticles (seeds) with a mean diameter of 8 nm followed by UV-induced chloroauric acid reduction. We also demonstrated a simple and quick technique used for the analysis of the SERS platform formation at every stage through the detection of spectral shifts in the optical transmission of HC-MOFs. The enhancement of the Raman signal of a model analyte Rhodamine 6G was obtained using such type of SERS platform. Thus, a combination of nanostructured gold coating as a SERS-active surface and a hollow-core fiber as a microfluidic channel and a waveguide is perspective for point-of-care medical diagnosis based on liquid biopsy and exhaled air analysis.

Photoacoustic and fluorescence lifetime imaging of diatoms.

Photoacoustic and fluorescent methods are used intensely in biology and medicine. These approaches can also be used to investigate unicellular diatom algae that are extremely important for Earth's ecology. They are enveloped within silica frustules (exoskeletons), which can be used in drug delivery systems. Here, we report for the first time the successful application of photoacoustic (PA) and fluorescent visualization of diatoms. Chlorophyll a and c and fucoxanthin were found likely to be responsible for the photoacoustic effect in diatoms. The PA signal was obtained from gel drops containing diatoms and was found to increase with the diatom concentration. The fluorescence lifetime of the diatom chromophores ranged from 0.5 to 2 ns. The dynamic light scattering, absorbance, and SEM characterization techniques were also applied. The results were considered in combination to elucidate the nature of the photoacoustic signal. Possible biotechnological applications are proposed for the remote photoacoustic monitoring of algae.

Live-Cell Imaging by Confocal Raman and Fluorescence Microscopy Recognizes the Crystal Structure of Calcium Carbonate Particles in HeLa Cells.

Porous calcium carbonate (CaCO3 ) vaterite particles are very attractive templates for the encapsulation of pharmaceuticals and for the construction of hollow polyelectrolyte capsules, sensors, and enzyme-catalyzed reactors. Although CaCO3 is biocompatible and biodegradable, little is known about the intercellular behavior and properties of vaterite particles in the cytoplasm of cells. In this work, the authors combine confocal Raman and fluorescent microscopy for the imaging of porous CaCO3 vaterite particles in HeLa cells to study the uptake and status of the particles inside the cells in real time. Analysis of the fluorescence images shows that the particles penetrated the plasma membrane 3 h after being added to the cell culture and that the internalization of the particles continued up to 48 h. The crystal structure of individual vaterite particles in the cytoplasm of HeLa cells did not obviously change for 144 h. For clusters of particles, however, the authors identify Raman spectroscopic signatures of the stable calcite phase after 72 h of incubation, confirming an ion-exchange mechanism of vaterite transformation to calcite. The results indicate that these imaging approach to examining inorganic particles in living cells may have theranostic applications.

Polylactic Acid Sealed Polyelectrolyte Multilayer Microchambers for Entrapment of Salts and Small Hydrophilic Molecules Precipitates.

Efficient depot systems for entrapment and storage of small water-soluble molecules are of high demand for wide variety of applications ranging from implant based drug delivery in medicine and catalysis in chemical processes to anticorrosive systems in industry where surface-mediated active component delivery is required on a time and site specific manner. This work reports the fabrication of individually sealed hollow-structured polyelectrolyte multilayer (PEM) microchamber arrays based on layer-by-layer self-assembly as scaffolds and microcontact printing. These PEM chambers are composed out of biocompatible polyelectrolytes and sealed by a monolayer of hydrophobic biocompatible and biodegradable polylactic acid (PLA). Coating the chambers with hydrophobic PLA allows for entrapment of a microair-bubble in each chamber that seals and hence drastically reduces the PEM permeability. PLA@PEM microchambers are proven to enable prolonged subaqueous storage of small hydrophilic salts and molecules such as crystalline NaCl, doxicycline, and fluorescent dye rhodamine B. The presented microchambers are able to entrap air bubbles and demonstrate a novel strategy for entrapment, storage, and protection of micropackaged water-soluble substances in precipitated form. These chambers allow triggered release as demonstrated by ultrasound responsiveness of the chambers. Low-frequency ultrasound exposure is utilized for microchamber opening and payload release.

Vaterite coatings on electrospun polymeric fibers for biomedical applications.

The process of porous calcium carbonate (CaCO3 ) covering on electrospun poly(ε-caprolactone) (PCL) fibers is described in this study. Uniform CaCO3 coatings, composed of vaterite microparticles and its aggregates, were formed on PCL fibers by mineral precipitation from solution under ultrasonic treatment. The porous structure of CaCO3 in vaterite polymorphic form is useful for loading of various substances (drugs and nanoparticles), and this property makes vaterite an appropriate material for design of drug delivery systems. Such mineralization was implemented to attain therapeutic and/or biological activity of tissue engineering scaffolds based on electrospun PCL, by means of CaCO3 coatings. Various structures and polymorphs of CaCO3 coatings were obtained by variation of growth conditions (time of fiber incubation in work solution, ultrasonic treatment of this system). Coating homogeneity, CaCO3 polymorphic form, morphology, and CaCO3 mass can be controlled by number of successive stages of fibrous material treatment. Cytotoxicity tests showed that PCL fibers mineralized with CaCO3 did not release substances toxic for cells. SEM images of PCL/CaCO3 scaffolds cultured with cells demonstrate that scaffolds supported cell adhesion and spreading. The presented results show the new technique of controlled PCL scaffold mineralization with vaterite, and an opportunity of using PCL/CaCO3 as scaffolds for tissue engineering. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 94-103, 2017.

Multifunctional polyelectrolyte microcapsules as a contrast agent for photoacoustic imaging in blood.

The polyelectrolyte microcapsules that can be accurate either visualized in biological media or in tissue would enhance their further in vivo application both as a carrier of active payloads and as a specific sensor. The immobilization of active species, for instance fluorescent dyes, quantum dots, metal nanoparticles, in polymeric shell enables visualization of capsules by optical imaging techniques in aqueous solution. However, for visualization of capsules in complex media an instrument with high contrast modality requires. Herein, we show for the first time photoacoustic imaging (PAI) of multifunctional microcapsules in water and in blood. The microcapsules exhibit greater photoacoustic intensity compare to microparticles with the same composition of polymeric shell presumably their higher thermal expansion. Photoacoustic intensity form microcapsules dispersed in blood displays an enhancement (2-fold) of signal compare to blood. Photoacoustic imaging of microcapsules might contribute to non-invasive carrier visualization and further their in vivo distribution.

Nanoplasmonic chitosan nanofibers as effective SERS substrate for detection of small molecules.

The use of surface enhanced Raman spectroscopy (SERS) is limited by low reproducibility and uniformity of the response. Solving these problems can turn the laboratory use of SERS into real-world application. In this regard, soft SERS-active substrates can enable portable instrumentation and reduce costs in the fabrication of SERS-based sensors. Here, plasmonic free-standing films made of biocompatible chitosan nanofibers and gold nanoparticles are engineered by a simple protocol varying the concentration of chloroauric acid. The concentration and distribution of gold nanoparticles in films are controlled in a predictable way, and SERS spectra for the standard 2-naphthalenethiol with concentration less than 10(-15) M are acquired in a reproducible way. The statistical analysis reveals a relatively high and locally uniform performance of SERS with an enhancement factor of 2 × 10(5) for 86% of the points on the imaged area of the SERS substrate. Potential SERS detection of small molecules, both Rhodamine 6G and d-Glucose, in the micromolar range is demonstrated.

Macromolecule loading into spherical, elliptical, star-like and cubic calcium carbonate carriers.

We fabricated calcium carbonate particles with spherical, elliptical, star-like and cubical morphologies by varying relative salt concentrations and adding ethylene glycol as a solvent to slow down the rate of particle formation. The loading capacity of particles of different isotropic (spherical and cubical) and anisotropic (elliptical and star-like) geometries is investigated, and the surface area of such carriers is analysed. Potential applications of such drug delivery carriers are highlighted.

Colloidal micro- and nano-particles as templates for polyelectrolyte multilayer capsules.

Colloidal particles play an important role in various areas of material and pharmaceutical sciences, biotechnology, and biomedicine. In this overview we describe micro- and nano-particles used for the preparation of polyelectrolyte multilayer capsules and as drug delivery vehicles. An essential feature of polyelectrolyte multilayer capsule preparations is the ability to adsorb polymeric layers onto colloidal particles or templates followed by dissolution of these templates. The choice of the template is determined by various physico-chemical conditions: solvent needed for dissolution, porosity, aggregation tendency, as well as release of materials from capsules. Historically, the first templates were based on melamine formaldehyde, later evolving towards more elaborate materials such as silica and calcium carbonate. Their advantages and disadvantages are discussed here in comparison to non-particulate templates such as red blood cells. Further steps in this area include development of anisotropic particles, which themselves can serve as delivery carriers. We provide insights into application of particles as drug delivery carriers in comparison to microcapsules templated on them.

Preserving catalytic activity and enhancing biochemical stability of the therapeutic enzyme asparaginase by biocompatible multilayered polyelectrolyte microcapsules.

The present study focuses on the formation of microcapsules containing catalytically active L-asparaginase (L-ASNase), a protein drug of high value in antileukemic therapy. We make use of the layer-by-layer (LbL) technique to coat protein-loaded calcium carbonate (CaCO3) particles with two or three poly dextran/poly-L-arginine-based bilayers. To achieve high loading efficiency, the CaCO3 template was generated by coprecipitation with the enzyme. After assembly of the polymer shell, the CaCO3 core material was dissolved under mild conditions by dialysis against 20 mM EDTA. Biochemical stability of the encapsulated L-asparaginase was analyzed by treating the capsules with the proteases trypsin and thrombin, which are known to degrade and inactivate the enzyme during leukemia treatment, allowing us to test for resistance against proteolysis by physiologically relevant proteases through measurement of residual l-asparaginase activities. In addition, the thermal stability, the stability at the physiological temperature, and the long-term storage stability of the encapsulated enzyme were investigated. We show that encapsulation of l-asparaginase remarkably improves both proteolytic resistance and thermal inactivation at 37 °C, which could considerably prolong the enzyme's in vivo half-life during application in acute lymphoblastic leukemia (ALL). Importantly, the use of low EDTA concentrations for the dissolution of CaCO3 by dialysis could be a general approach in cases where the activity of sensitive biomacromolecules is inhibited, or even irreversibly damaged, when standard protocols for fabrication of such LbL microcapsules are used. Encapsulated and free enzyme showed similar efficacies in driving leukemic cells to apoptosis.

Nanoplasmonics for dual-molecule release through nanopores in the membrane of red blood cells.

A nanoplasmonics-based opto-nanoporation method of creating nanopores upon laser illumination is applied for inducing diffusion and triggered release of small and large molecules from red blood cells (RBCs). The method is implemented using absorbing gold nanoparticle (Au-NP) aggregates on the membrane of loaded RBCs, which, upon near-IR laser light absorption, induce release of encapsulated molecules from selected cells. The binding of Au-NPs to RBCs is characterized by Raman spectroscopy. The process of release is driven by heating localized at nanoparticles, which impacts the permeability of the membrane by affecting the lipid bilayer and/or trans-membrane proteins. Localized heating and temperature rise around Au-NP aggregates is simulated and discussed. Research reported in this work is relevant for generating nanopores for biomolecule trafficking through polymeric and lipid membranes as well as cell membranes, while dual- and multi-molecule release is relevant for theragnostics and a wide range of therapies.

Encapsulation, release and applications of LbL polyelectrolyte multilayer capsules.

Ever since their invention in 1998, polyelectrolyte multilayer micro- and nano-capsules have impacted various areas of biology, chemistry and physics. Here we highlight progress achieved since the millennium in the areas of encapsulation in and release from microcapsules, describe various structures including multicompartment and anisotropic constructs, and provide examples of several applications in biology. We also describe application areas such as drug delivery, intracellular trafficking, enzyme-catalyzed reactions, mechano-biology which benefited from recent developments in the area of polyelectrolyte multilayer capsules.

Anisotropic multicompartment micro- and nano-capsules produced via embedding into biocompatible PLL/HA films.

We present a novel strategy to fabricate anisotropic multicompartment Janus capsules by embedding larger containers into a soft poly-L-lysine/hyaluronic acid (PLL/HA) polymeric film, followed by adsorption of smaller containers on top of their unmasked surface. This research is also attractive for developing substrates for cell cultures.

Impact of magnetite nanoparticle incorporation on optical and electrical properties of nanocomposite LbL assemblies.

Optical and electrical properties of polyelectrolyte/iron oxide nanocomposite planar films on silicon substrates were investigated for different amount of iron oxide nanoparticles incorporated in the films. The nanocomposite assemblies prepared by the layer-by-layer assembly technique were characterized by ellipsometry, atomic force microscopy, and secondary ion mass-spectrometry. Absorption spectra of the films reveal a shift of the optical absorption edge to higher energy when the number of deposited layers decreases. Capacitance-voltage and current-voltage measurements were applied to study the electrical properties of metal-oxide-semiconductor structures prepared by thermal evaporation of gold electrodes on nanocomposite films. The capacitance-voltage measurements show that the dielectric constant of the film increases with the number of deposited layers and the fixed charge and the trapped charge densities have a negative sign.

Magnetic/gold nanoparticle functionalized biocompatible microcapsules with sensitivity to laser irradiation.

Nanocomposite microcapsules with both gold and magnetite nanoparticles in the shell were prepared in a layer-by-layer procedure using biocompatible polyelectrolytes and nanoparticles. The process of a nanocomposite multilayer formation was investigated using a quartz crystal microbalance (QCM). In addition, nanocomposite microcapsules were characterized by atomic force microscopy (AFM), transmission electron microscopy (TEM) and energy-dispersive X-ray spectroscopy (EDX). It is found that the amount of adsorbed nanoparticles is similar for nanoparticles of various sizes, while the concentration of gold nanoparticles in the shell is higher for smaller nanoparticles. Adsorption of gold nanoparticles is found to be more effective than adsorption of magnetic nanoparticles. Multifunctionality of microcapsules is manifested by dual: magnetic and optical responses. Iron oxide nanoparticles embedded in the microcapsule shell allowed for control over capsules positioning by external magnetic fields. Furthermore, the nanocomposite microcapsules could be opened by laser irradiation; these results are of interest for medical and biological applications.