Triarylamine-Functionalized Imidazolyl-Capped Bithiophene Hole Transporting Material for Cost-Effective Perovskite Solar Cells.

Triarylamine end-capped-functionalized arylene-imidazole derivatives were synthesized from readily accessible, inexpensive precursors and employed as hole transporting materials (HTMs) in perovskite solar cells (PSCs). All the HTMs displayed high thermal decomposition temperatures (>410 °C), which is beneficial for realizing stable PSC devices. In addition, the new HTMs show appropriate energy level alignment with the perovskite layer, ensuring efficient hole transfer from perovskites to HTMs. Interestingly, PSCs fabricated with the triarylamine-functionalized imidazolyl-capped bithiophene molecule (DImBT-4D) as the HTM exhibited the best power conversion efficiency of 20.11%, comparable to that of the benchmark HTM spiro-OMeTAD, prompting it be a prospective candidate for large-scale PSC applications.

Solution-Processable Quinoidal Dithioalkylterthiophene-Based Small Molecules Pseudo-Pentathienoacenes via an Intramolecular S···S Lock for High-Performance n-Type Organic Field-Effect Transistors.

A new organic small-molecule family comprising tetracyanoquinodimethane-substituted quinoidal dithioalky(SR)terthiophenes (DSTQs) (DSTQ-6 (1); SR = SC6H13, DSTQ-10 (2); SR = SC10H21, DSTQ-14 (3); SR = SC10H21) was synthesized and contrasted with a nonthioalkylated analogue (DRTQ-14 (4); R = C14H29). The physical, electrochemical, and electrical properties of these new compounds are thoroughly investigated. Optimized geometries obtained from density functional theory calculations and single-crystal X-ray diffraction reveal the planarity of the SR-containing DSTQ core. DSTQs pack in a slipped π-π stacked two-dimensional arrangement, with a short intermolecular stacking distance of 3.55 Å and short intermolecular S···N contacts of 3.56 Å. Thin-film morphological analysis by grazing incident X-ray diffraction reveals that all DSTQ molecules are packed in an edge-on fashion on the substrate. The favorable molecular packing, the high core planarity, and very low lowest unoccupied molecular orbital (LUMO) energy level (-4.2 eV) suggest that DSTQs could be electron-transporting semiconductors. Organic field-effect transistors based on solution-sheared DSTQ-14 exhibit the highest electron mobility of 0.77 cm2 V-1 s-1 with good ambient stability, which is the highest value reported to date for such a solution process terthiophene-based small molecular semiconductor. These results demonstrate that the device performance of solution-sheared DSTQs can be improved by side chain engineering.

High performance solution-processable tetrathienoacene (TTAR) based small molecules for organic field effect transistors (OFETs).

Three new organic semiconductors with alkyl chain-substituted tetrathienoacene (TTAR) as the central core and both ends capped with thiophene (DT-TTAR), thienothiophene (DTT-TTAR) and dithienothiophene (DDTT-TTAR) have been synthesized and characterized for organic field effect transistor (OFET) applications. A hole mobility of 0.81 cm2 V-1 s-1 was achieved for the DDTT-TTAR film, which represents the highest mobility yet found for a solution-processable p-type TTAR-based small molecular semiconductors.

Tuning coercive force by adjusting electric potential in solution processed Co/Pt(111) and the mechanism involved.

A combination of a solution process and the control of the electric potential for magnetism represents a new approach to operating spintronic devices with a highly controlled efficiency and lower power consumption with reduced production cost. As a paradigmatic example, we investigated Co/Pt(111) in the Bloch-wall regime. The depression in coercive force was detected by applying a negative electric potential in an electrolytic solution. The reversible control of coercive force by varying the electric potential within few hundred millivolts is demonstrated. By changing the electric potential in ferromagnetic layers with smaller thicknesses, the efficiency for controlling the tunable coercive force becomes higher. Assuming that the pinning domains are independent of the applied electric potential, an electric potential tuning-magnetic anisotropy energy model was derived and provided insights into our knowledge of the relation between the electric potential tuning coercive force and the thickness of the ferromagnetic layer. Based on the fact that the coercive force can be tuned by changing the electric potential using a solution process, we developed a novel concept of electric-potential-tuned magnetic recording, resulting in a stable recording media with a high degree of writing ability.

Synthesis and Characterization of Two-Photon Active Chromophores Based on Tetrathienoacene (TTA) and Dithienothiophene (DTT).

Three new donor-π-donor (D-π-D) tetrathienoacene (thieno[2',3':4,5]thieno[3,2-b]thieno[2,3-d]thiophene (TTA))-cored chromophores, end-functionalized with electron-donating triphenylamine (TPA) groups, were developed and characterized for their two-photon-related properties by using both nano- and femtosecond laser pulses as the probing tools. TTA-based chromophores exhibit stronger and more widely dispersed two-photon absorption (2PA) than those of dithienothiophene (DTT)-based congeners. As a consequence, the bithiophene-conjugated TTA chromophore exhibits the highest maximum 2PA cross-section value (up to 2500 GM) with good thermal stability, and thus, it is the best performing two-photon chromophore among the studied model compounds. The bithiophene-conjugated DTT analogue exhibits the second highest maximum two-photon absorptivity of 1950 GM, which is nearly 7 times larger than that of previously reported DTT-based chromophores.

Adsorption and desorption of bis-(3-sulfopropyl) disulfide during Cu electrodeposition and stripping at Au electrodes.

The adsorption and desorption of bis-(3-sulfopropyl) disulfide (SPS) on Cu and Au electrodes and its electrochemical effect on Cu deposition and dissolution were examined using cyclic voltammetry stripping (CVS), field-emission scanning electron microscopy (FESEM), and X-ray photoelectron spectroscopy (XPS). SPS dissociates into 3-mercapto-1-propanesulfonate when it is contacted with Au and Cu electrodes, producing Cu(I)- and Au(I)-thiolate species. These thiolates couple with chloride ions and promote not only the reduction of Cu(2+) in Cu deposition but also the oxidation of Cu(0) to Cu(+) in Cu stripping. During Cu electrodeposition on the SPS-modified Au electrode, thiolates transfer from Au onto the Cu underpotential deposition (UPD) layer. The Cu UPD layer stabilizes a large part of the transferred thiolates which subsequently is buried by the Cu overpotential deposition (OPD) layer. The buried thiolates reappear on the Au electrode after the copper deposit is electrochemically stripped off. A much smaller part of thiolates transfers to the top of the Cu OPD layer. In contrast, when SPS preadsorbs on a Cu-coated Au electrode, almost all of the adsorbed SPS leaves the Cu surface during Cu electrochemical stripping and does not return to the uncovered Au surface. A reaction mechanism is proposed to explain these results.

Effect of chloride ions on the adsorption of 3-mercapto-1-propanesulfonic acid and bis(3-sulfopropyl)-disulfide on a Au(111) surface.

In situ scanning tunneling microscopy (STM) and cyclic voltammetry (CV) were used to study the adsorption of 3-mercapto-1-propanesulfonic acid (MPS) and bis(3-sulfopropyl)-disulfide (SPS) on Au(111) electrode in a HClO(4) aqueous solution. Chloride ions were introduced into the electrolyte solution, and their effect on the adsorption behavior of MPS and SPS was investigated. The CV results show that SPS and MPS molecules preferentially adsorb on the Au(111) surface compared to chloride ions, and furthermore, chloride ion can induce the adsorption of thiol molecules on the Au(111) surface. In the absence of chloride, no adsorption phase of SPS (or MPS) adlayer can be imaged by STM at low potentials. Raising electrode potential leads to the appearance of disordered adsorption phase at ca. 0.4 V (vs RHE) and ordered adlattices at ca. 0.8 V. In the presence of chloride, ordered adsorption structures of SPS and MPS appear at a lower potential (0.2 V), implying the enhancement effect of chloride to the thiol adsorption. It is inferred that the presence of chloride ions triggers a more positively charged gold surface, enhancing the reaction rate of thiol adsorption. Furthermore, the presence of chloride also leads to a decrease in the thiol-electrolyte interaction, due to the high solvation effect of chloride ions, which promotes the adsorption of SPS and MPS onto the Au surface. With further elevation of electrode potential, electrostatic interaction leads to coadsorption of chloride ions into the adlayer, as well as orientation changes of the ad-molecules. As a result, the ordered adlattice was disrupted and disappeared at ca. 0.5 V.

Molecular assembly and electropolymerization of 3,4-ethylenedioxythiophene on Au(111) single crystal electrode as probed by in situ electrochemical STM in 0.10 M HClO4.

We have used electrochemical scanning tunneling microscopy (EC-STM) to obtain molecular insights on the adlayer structures and electrochemical polymerization of 3,4-ethylenedioxythiophene (EDOT) on a bare Au(111) single crystal electrode in 0.1 M HClO(4) solution. Cyclic voltammetric (CV) studies showed an increase in anodic current at 0.90 V with the oxidation of EDOT monomer occurring at E = 1.10 V (vs reversible hydrogen electrode). In situ STM revealed, for the first time, that EDOT molecules can spontaneously form organized adlayers on a bare Au(111) surface with 18 muM concentration of EDOT in aqueous solution. Molecularly resolved STM images of the EDOT adlayer showed two domains consisting of disordered and ordered structures with the formation of vacancy islands or "etch pits". Several EDOT structures were observed at +0.60 V, namely, (4 x 7), (5 x square root(37)), and (square root(7) x 3) with calculated coverages of 0.107, 0.114, and 0.111 ML, respectively. Electropolymerization was also carried out using in situ STM in 0.10 M HClO(4) under potential control.

Substrate-induced varied conformation and molecular assemblies: in situ STM observation of beta-substituted oligothiophene adlayers on Au(111).

The adsorption of 3,3'''-dihexyl-2,2':5',2'':5'',2'''-quaterthiophene (4T) molecules on an Au(111) electrode was examined by using in situ scanning tunneling microscopy in 0.10 M HClO(4), revealing internal molecular structures of the tetrathiophene backbones and the hexyl side chains. The 4T admolecules were packed in lamellae with their molecular axis aligned along the main axis of the Au(111) substrate and their hexyl side chains interdigitated to enhance intermolecular interaction. Dynamics of molecular organization incurred by the shifting of potential was also observed in this study. By examining and comparing the adsorption of 4T on HOPG and Au(111), we address the role of the substrate in understanding the arrangement of 4T admolecules.

Direct observation of conformational changes of beta-substituted duodecithiophene on a Au(111)-(square root(3) x 22) substrate using in situ electrochemical STM in 0.1 M HClO4.

The adsorption of hexahexylduodecithiophene (12T) on a Au(111) electrode was investigated by using cyclic voltammetry (CV) and in situ electrochemical scanning tunneling microscopy (EC-STM) in 0.10 M HClO(4). Potential control at 0.20 V (vs RHE) revealed adlayer structures of mostly folded and rarely angular (oblique) and extended conformations on a reconstructed Au(111)-(square root(3) x 22) surface. The angular and extended conformations predominate when the electrode potential is increased to 0.35 and 0.60 V. Folded structures are still evident, but dynamic STM studies showed unfolding of this conformation. With molecular STM imaging of 12T adlayers, we address the packing arrangement and conformational changes of 12T admolecules on the reconstructed Au(111) electrode surface.

3-Mercapto-1-propanesulfonic acid and Bis(3-sulfopropyl) disulfide adsorbed on Au(111): in situ scanning tunneling microscopy and electrochemical studies.

3-Mercapto-1-propanesulfonic acid (MPS) and bis(3-sulfopropyl) disulfide (SPS) adsorbed on a Au(111) electrode were studied by using in situ scanning tunneling microscopy (STM). Although the adsorptions of MPS and SPS are known to be oxidative and reductive, respectively, on an Au(111) electrode, these two admolecules behave similarly in terms of phase evolution, surface coverage, potential for stripping, and characteristics of cyclic voltammetry. However, different adsorption mechanisms of these molecules result in different structures. Raising electrode potential causes more MPS and SPS molecules to adsorb, yielding ordered adlattices between 0.67 and 0.8 V (vs reversible hydrogen electrode). The ordered adlattices of MPS and SPS appear as striped and netlike structures with molecules adsorbed parallel to the Au(111) surface. Switching potential to 0.9 V or more positive still does not result in upright molecular orientation, possibly inhibited by electrostatic interaction between the end group of -SO(3)(-) and the Au(111) electrode. Lowering the potential to 0.4 V disrupted the ordered adlayer. Stripping voltammetric experiments show that MPS and SPS admolecules are desorbed from Au(111) at the same potential, suggesting that these molecules are both adsorbed via their sulfur headgroups. The S-S bond in SPS is likely broken upon its adsorption on Au(111).

Adlayer structure of octa-alkoxy-substituted copper(II) phthalocyanine on Au(111) by electrochemical scanning tunneling microscopy.

Electrochemical scanning tunneling microscopy (ECSTM) has been used to examine the adlayer of octa-alkoxy-substituted copper(II) phthalocyanines (CuPc(OC(8)H(17))(8)) on Au(111) in 0.1 M HClO(4), where the molecular adlayer was prepared by spontaneous adsorption from a benzene solution containing this molecule. Topography STM scans revealed long-range ordered, interweaved arrays of CuPc(OC(8)H(17))(8) with coexistent rectangular and hexagonal symmetries. High-quality STM molecular resolution yielded the internal molecular structure and the orientation of CuPc(OC(8)H(17))(8) admolecules. These STM results could shed insight into the method of generating ordered molecular assemblies of phthalocyanine molecules with long-chained substitutes on metal surface.

In situ scanning tunneling microscopy of 1,6-hexanedithiol, 1,9-nonanedithiol, 1,2-benzenedithiol, and 1,3-benzenedithiol adsorbed on pt(111) electrodes.

Cyclic voltammetry (CV) and in situ scanning tunneling microscopy (STM) were used to examine four dithiol molecules, including 1,6-hexanedithiol, 1,9-nonanedithiol, 1,2-benzenedithiol, and 1,3-benzenedithiol, adsorbed on well-ordered Pt(111) electrodes in 0.1 M HClO(4). The open-circuit potential (OCP) of Pt(111) electrodes decreased substantially from 0.95 to 0.3 V (versus reversible hydrogen electrode) upon the adsorption of dithol molecules, which indicates that these adsorbates injected electrons into the Pt electrode. For all dithiol molecules, ordered adlattices of p(2 x 2) and (square root 3 x square root 3)R30 degrees were formed when the dosing concentration was lower than 150 microM and the potential of Pt(111) was more negative than 0.5 V. Raising the potential of Pt(111) from 0.1 to 0.4 V or more positive values could transform p(2 x 2) to (square root 3 x square root 3)R30 degrees before it turned disarray. The insensitivity of the structure of dithiol adlayers with their chemical structures was explained by upright molecular orientation with the formation of one Pt-S bond per dithiol molecule. This molecular orientation was independent of the coverage of dithiol molecules, as nucleation seeds produced at the beginning of adsorption were also constructed with p(2 x 2). The triangular-shaped STM molecular resolution suggested 3-fold binding of sulfur headgroup on Pt(111). All dithiols were adsorbed so strongly on Pt(111) electrodes that switching the potential negatively to the onset of hydrogen evolution in 0.1 M HClO(4) or water reduction in 1 M KOH could not displace dithiol admolecules.

Electrodeposition of Au monolayer on Pt(111) mediated by self-assembled monolayers.

In-situ scanning tunneling microscopy (STM), cyclic voltammetry (CV), and infrared reflection-adsorption spectroscopy (IRRAS) have been used to examine the electrodeposition of gold onto Pt(111) electrodes modified with benzenethiol (BT) and benzene-1,2-dithiol (BDT) in 0.1 M HClO4 containing 10 microM HAuCl4. Both BT and BDT were attached to Pt(111) via one sulfur headgroup. STM and IRRAS results indicated that the other SH group of BDT was pendant in the electrolyte. Both BT and BDT formed (2 x 2) structures at the coverage of 0.25, and they were transformed into (square root(3) x square root(3))R30 degrees as the coverage was raised to 0.33. These two organic surface modifiers resulted in 3D and 2D gold islands at BT- and BDT-coated Pt(111) electrodes, respectively. The pendant SH group of BDT could interact specifically with gold adspecies to immobilize gold adatoms on the Pt(111) substrate, which yields a 2D growth of gold deposition. Molecular resolution STM revealed an ordered array of (6 x 2 square root(13)) after a full monolayer of gold was plated on the BDT/Pt(111) electrode. Since BDT was strongly adsorbed on Pt(111), gold adatoms only occupied free sites between BDT admolecules on Pt(111). This is supported by a stripping voltammetric analysis, which reveals no reductive desorption of BDT admolecules at a gold-deposited BDT/Pt(111) electrode. It seems that the BDT adlayer acted as the template for gold deposit on Pt(111). In contrast, a BT adlayer yielded 3D gold deposit on Pt(111). This study demonstrates unambiguously that organic surface modifiers could contribute greatly to the electrodeposition of metal adatoms.

Ordered molecular assemblies of substituted bis(phthalocyaninato) rare earth complexes on Au(111): in situ scanning tunneling microscopy and electrochemical studies.

Substituted bis(phthalocyaninato) rare earth complexes ML2 (M = Y and Ce; L = [Pc(OC8H17)8]2, where Pc = phthalocyaninato) were adsorbed onto single crystalline Au(111) electrodes from benzene saturated with either YL2 or CeL2 complex at room temperature. In situ scanning tunneling microscopy (STM) and cyclic voltammetry (CV) were used to examine the structures and the redox reactions of these admolecules on Au(111) electrodes in 0.1 mol dm(-3) HClO4. The CVs obtained with YL2- and CeL2-coated Au(111) electrodes respectively contained two and three pairs of redox peaks between 0 and 1.0 V (versus reversible hydrogen electrode). STM molecular resolution revealed that YL2 and CeL2 admolecules were imaged as spherical protrusions separated by 2.3 nm, which suggests that they were oriented with their molecular planes parallel to the unreconstructed Au(111)-(1 x 1). Both molecules when adsorbing from approximately micromolar benzene dosing solutions produced mainly ordered arrays characterized as (8 x 5 radical3)rect (theta = 0.0125). The redox reactions occurring between 0.2 and 1.0 V caused no change in the adlayer, but they were desorbed or oxidized at the negative and positive potential limits. The processes of adsorption and desorption at the negative potentials were reversible to the modulation of potential. Electrochemical impedance spectroscopy (EIS) and CV measurements showed that YL2 and CeL2 adlayers could block the adsorption of perchlorate anions and mediating electron transfer at the Au(111) electrode, leading to the enhancement of charge transfer for the ferro/ferricyanide redox couple.

Adsorption of formaldehyde on Pt(111) and Pt(100) electrodes: cyclic voltammetry and scanning tunneling microscopy.

The adsorption of formaldehyde (HCHO) on Pt(111) and Pt(100) electrodes was examined by cyclic voltammetry (CV) and in situ scanning tunneling microscopy (STM) in 0.1 M HClO(4). The extent of HCHO adsorption at both Pt electrodes was evaluated by comparing the CVs, particularly for the hydrogen adsorption and desorption between 0.05 and 0.4 V, obtained in 0.1 M HClO(4) with and without HCHO. The adsorption of HCHO on these Pt electrodes was significant only when [HCHO] >/= 10 mM. Adsorbed organic intermediate species acted as poisons, blocking Pt surfaces and causing delays in the oxidation of HCHO. Compared to Pt(111), Pt(100) was more prone to poisoning, as indicated by a 200 mV positive shift of the onset of HCHO oxidation. However, Pt(100) exhibited an activity 3 times higher than that of Pt(111), as indicated by the difference in peak current density of HCHO oxidation. Molecular resolution STM revealed highly ordered structures of Pt(111)-( radical7 x radical7)R19.1 degrees and Pt(100)-( radical2 x radical2) in the potential region between 0.1 and 0.3 V. Voltammetric measurements further showed that the organic poisons produced by HCHO adsorption behaved differently from the intentionally dosed CO admolecules, which supports the assumption for the formation of HCO or COH adspecies, rather than CO, as the poison. On both Pt electrodes, HCHO oxidation commenced preferentially at step sites at the onset potential of this reaction, but it occurred uniformly at the peak potentials.

In-situ scanning tunneling microscopy of carbon monoxide adsorbed on Au(111) electrode.

In-situ scanning tunneling microscopy (STM) coupled with cyclic voltammetry was used to examine the adsorption of carbon monoxide (CO) molecules on an ordered Au(111) electrode in 0.1 M HClO4. Molecular resolution STM revealed the formation of several commensurate CO adlattices, but the (9 x radical 3) structure eventually prevailed with time. The CO adlayer was completely electrooxidized to CO2 at 0.9 V versus RHE in CO-free 0.1 M HClO(4), as indicated by a broad and irreversible anodic peak which appeared at this potential in a positive potential sweep from 0.05 to 1.6 V. A maximal coverage of 0.3 was estimated for CO admolecules from the amount of charge involved in this feature. Real-time in-situ STM imaging allowed direct visualization of the adsorption process of CO on Au(111) at 0.1 V, showing the lifting of (radical 3 x 22) reconstruction of Au(111) and the formation of ordered CO adlattices. The (9 x radical 3) structure observed in CO-saturated perchloric acid has a coverage of 0.28, which is approximately equal to that determined from coulometry. Switching the potential from 0.1 to -0.1 V restored the reconstructed Au(111) with no change in the (9 x radical 3)-CO adlattice. However, the reconstructed Au(111) featured a pairwise corrugation pattern with two nearest pairs separated by 74 +/- 1 A, corresponding to a 14% increase from the ideal value of 65.6 A known for the ( radical 3 x 22) reconstruction. Molecular resolution STM further revealed that protrusions resulting from CO admolecules in the (9 x radical 3) structure exhibited distinctly different corrugation heights, suggesting that the CO molecules resided at different sites on Au(111). This ordered structure predominated in the potential range between 0.1 and 0.7 V; however, it was converted into new structures of (7 x radical 7) and ( radical 43 x 2 radical 13) on the unreconstructed Au(111) when the potential was held at 0.8 V for ca. 60 min. The coverage of CO adlayer decreased accordingly from 0.28 to 0.13 before it was completely removed from the Au(111) surface at more positive potentials.

Role of the anion in the underpotential deposition of cadmium on a Rh(111) electrode: probed by voltammetry and in situ scanning tunneling microscopy.

In situ scanning tunneling microscopy (STM) and cyclic voltammetry (CV) were employed to examine the underpotential deposition (UPD) of cadmium on a rhodium(111) electrode in sulfuric and hydrochloric acids. The (bi)sulfate and chloride anions in the electrolytes played a main role in controlling the number and arrangement of Cd adatoms. Deposition of Cd along with hydrogen adsorption occurred near 0.1 V (vs reversible hydrogen electrode) in either 0.05 M H2SO4 or 0.1 M HCl containing 1 mM Cd(ClO4)2. These coupled processes resulted in an erroneous coverage of Cd adatoms. The process of Cd deposition shifted positively to 0.3 V and thus separated from that of hydrogen in 0.05 M H2SO4 containing 0.5 M Cd2+. The amount of charge (80 microC/cm2) for Cd deposition in 0.5 M Cd2+ implied a coverage of 0.17 for the Cd adatoms, which agreed with in situ STM results. Regardless of [Cd2+], in situ STM imaging revealed a highly ordered Rh(111)-(6 x 6)-6Cd + HSO4- or SO42- structure in sulfuric acid,. In hydrochloric acid, in situ STM discerned a (2 x 2)-Cd + Cl structure at potentials where Cd deposition commenced. STM atomic resolution showed roughly one-quarter of a monolayer of Cd adatoms were deposited, ca. 50% more than in sulfuric acid. Dynamic in situ STM imaging showed potential dependent, reversible transformations between the (6 x 6) Cd adlattices and (square root 3 x square root 7)-(bi)sulfate structure, and between (2 x 2) and (square root 7 x square root 7)R19.1 degrees -Cl structures. The fact that different Cd structures observed in H2SO4 and HCl entailed the involvement of anions in Cd deposition, i.e. (bi)sulfate and chloride anions were codeposited with Cd adatoms on Rh(111).

Elucidation of the deposition processes and spatial structures of alkanethiol and arylthiol molecules adsorbed on Pt111 electrodes with in situ scanning tunneling microscopy.

In situ scanning tunneling microscopy (STM) was used to examine the spatial structures of n-alkane thiols (1-hexanethiol, 1-nonanethiol, and 1-octahexanethiol) and arylthiols (benzenethiol and 4-hydroxybenzenethiol) adsorbed on well-ordered Pt111 electrodes in 0.1 M HClO4. The electrochemical potential and molecular flux were found to be the dominant factors in determining the growth mechanisms, final coverages, and spatial structures of these organic adlayers. Depending on the concentrations of the thiols, deposition of self-assembled monolayers (SAMs) followed either the nucleation-and-growth mechanism or the random fill-in mechanism. Low and high thiol concentrations respectively produced two ordered structures, (2 x 2) and (square root of 3 x square root of 3)R30 degrees , between 0.05 and 0.3 V. On average, an ordered domain spanned 500 A when the SAMs were made at 0.15 V, but this dimension shrank substantially once the potential was raised above 0.3 V. This potential-induced order-to-disorder phase transition resulted from a continuous deposition of thiols, preferentially at domain boundaries of (square root of 3 x square root of 3 x )R30 degrees arrays. All molecular adlayers were completely disordered by 0.6 V, and this restructuring event was irreversible with potential modulation. Since all thiols were arranged in a manner similar to that adopted by sulfur adatoms (Sung et al. J. Am. Chem. Soc. 1997, 119, 194), it is likely that they were adsorbed mainly through their sulfur headgroups in a tilted configuration, irrespective of the coverage. Both the sulfur and phenyl groups of benzenethiol admolecules gave rise to features with different corrugation heights in the molecular-resolution STM images. All thiols were adsorbed strongly enough that they remained intact at a potential as negative as -1.0 V in 0.1 M KOH.