Particle Image Velocimetry Evaluation of Hemodynamics Proximal to the Kissing Stent Configuration in the Aorto-Iliac Bifurcation.

PURPOSE: The kissing stent (KS) method is low-risk compared with open surgery techniques. It is often used to treat aorto-iliac occlusive disease (AIOD). Deployment of the KS geometry has a high technical success rate. However, stent patency reduces in the first 5 years potentially due to deleterious flow behavior. Potentially harmful hemodynamics due to the KS were investigated in vitro. METHODOLOGY: A compliant phantom of the aorto-iliac bifurcation was manufactured. Two surrogate stent-grafts were deployed into the phantom in the KS configuration to investigate effects of the presence of the stents, including the compliance mismatch they cause, on the hemodynamics proximal and distal to the KS. The investigation used pulsatile flow through a flow circuit to simulate abdominal aortic flow. Particle image velocimetry (PIV) was used to quantify the hemodynamics. RESULTS: PIV identified peak proximal and distal velocity in vitro was 0.71 and 1.40m·s-1, respectively, which were within physiological ranges. Throughout systole, flow appeared normal and undisturbed. A lumen wall collapse in the sagittal plane formed during late systole and continued to early diastole proximal to the aorto-iliac bifurcation, distal to the inlet stent position. The wall collapse led to disturbed flow proximal to the stented region in early diastole producing potential recirculation zones and abnormal flow patterns. CONCLUSION: The normal systolic flow behavior indicates the KS configuration is unlikely to cause an inflammatory response of the arterial walls. The collapse has not been previously identified and may potentially cause long-term patency reduction. It requires further investigation. CLINICAL IMPACT: The role of this article is to provide further insight into the haemodynamic behavior through a stented aorto-iliac artery. The results of this investigation will improve the understanding of the effects that using the kissing stent method may have on a patient and help to identify high risk regions that may require more detailed monitoring. This paper also develops the in vitro modelling techniques that will enable further research that cannot be carried out within patients.

Review of the Development of Hemodynamic Modeling Techniques to Capture Flow Behavior in Arteries Affected by Aneurysm, Atherosclerosis, and Stenting.

Cardiovascular diseases (CVDs) are the leading cause of death in the developed world. CVD can include atherosclerosis, aneurysm, dissection, or occlusion of the main arteries. Many CVDs are caused by unhealthy hemodynamics. Some CVDs can be treated with the implantation of stents and stent grafts. Investigations have been carried out to understand the effects of stents and stent grafts have on arteries and the hemodynamic changes post-treatment. Numerous studies on stent hemodynamics have been carried out using computational fluid dynamics (CFD) which has yielded significant insight into the effect of stent mesh design on near-wall blood flow and improving hemodynamics. Particle image velocimetry (PIV) has also been used to capture behavior of fluids that mimic physiological hemodynamics. However, PIV studies have largely been restricted to unstented models or intra-aneurysmal flow rather than peri or distal stent flow behaviors. PIV has been used both as a standalone measurement method and as a comparison to validate the CFD studies. This article reviews the successes and limitations of CFD and PIV-based modeling methods used to investigate the hemodynamic effects of stents. The review includes an overview of physiology and relevant mechanics of arteries as well as consideration of boundary conditions and the working fluids used to simulate blood for each modeling method along with the benefits and limitations introduced.

In vitro pulsatile flow study in compliant and rigid ascending aorta phantoms by stereo particle image velocimetry.

The aorta is a high risk region for cardiovascular disease (CVD). Haemodynamic patterns leading to CVD are not well established despite numerous experimental and numerical studies. Most overlook effects of arterial compliance and pulsatile flow. However, rigid wall assumptions can lead to overestimation of wall shear stress; a key CVD determinant. This work investigates the effect of compliance on aortic arch haemodynamics experiencing pulsatility. Rigid and compliant phantoms of the arch and brachiocephalic branch (BCA) were manufactured. Stereoscopic particle image velocimetry was used to observe velocity fields. Higher velocity magnitude was observed in the rigid BCA during acceleration. However, during deceleration, the compliant phantom experienced higher velocity. During deceleration, a low velocity region initiated and increased in size in the BCA of both phantoms with irregular shape in the compliant. At mid-deceleration, considerably larger recirculation was observed under compliance compared to rigid. Another recirculation region formed and increased in size on the inner wall of the arch in the compliant during late deceleration, but not rigid. The recirculation regions witnessed identify as high risk areas for atherosclerosis formation by a previous ex-vivo study. The results demonstrate necessity of compliance and pulsatility in haemodynamic studies to obtain highly relevant clinical outcomes.

PIV Analysis of Haemodynamics Distal to the Frozen Elephant Trunk Stent Surrogate.

PURPOSE: The Frozen Elephant Trunk (FET) stent is a hybrid endovascular device that may be implemented in the event of an aneurysm or aortic dissection of the aortic arch or superior descending aorta. A Type 1B endoleak can lead to intrasaccular flow during systole and has been identified as a known failure of the FET stent graft. The purpose was to develop in-vitro modelling techniques to enable the investigation of the known failure. METHODS: A silicone aortic phantom and 3D printed surrogate stent graft were manufactured to investigate the haemodynamics of a Type 1B endoleak. Physiological pulsatile flow dynamics distal to the surrogate stent graft were investigated in-vitro using Particle Image Velocimetry (PIV). RESULTS: PIV captured recirculation zones and an endoleak distal to the surrogate stent graft. The endoleak was developed at the peak of systole and sustained until the onset of diastole. The endoleak was asymmetric, indicating a potential variation in the phantom artery wall thickness or stent alignment. Recirculation was identified on the posterior dorsal line during late systole. CONCLUSIONS: The identification of the Type 1B endoleak proved that in-vitro modelling can be used to investigate complex compliance changes and wall motions. The recirculation may indicate the potential for long term intimal layer inflammatory issues such as atherosclerosis. These results may aid future remediation techniques or stent design. Further development of the methods used in this experiment may assist with the future testing of stents prior to animal or human trial.

Neti pot irrigation volume filling simulation using anatomically accurate in-vivo nasal airway geometry.

Nasal saline irrigation is frequently utilised in rhinosinusitis management, and after nasal and sinus surgery. Nasal saline irrigation improves mucociliary transport and assists inflammatory mediator and post-surgical debris removal. The aim of this study was to assess the influence different head positions, irrigation inflow nostril, and the nasal cycle have on Neti pot nasal saline volume filling within the nasal passages and maxillary sinuses. Computational fluid dynamics modelling using anatomically correct nasal geometry found only minor difference in nasal cavity volume filling with inflow from either side of the nose however both head position and inflow direction were both found to have a major influence on maxillary sinus volume filling. Computational modelling flow velocity results at the nasopharynx were validated using particle image velocimetry. It was also found that directing irrigation inflow into the patent side of the nose while in the head-back position achieved the highest volume filling of both maxillary sinuses.

A Review of Arterial Phantom Fabrication Methods for Flow Measurement Using PIV Techniques.

Cardiovascular diseases (CVD) are the leading cause of morbidity and mortality in the western world. In the last three decades, fluid dynamics investigations have been an important component in the study of the cardiovascular system and CVD. A large proportion of studies have been restricted to computational fluid dynamic (CFD) modeling of blood flow. However, with the development of flow measurement techniques such as particle image velocimetry (PIV), and recent advances in additive manufacturing, experimental investigation of such flow systems has become of interest to validate CFD studies, testing vascular implants and using the data for therapeutic procedures. This article reviews the technical aspects of in-vitro arterial flow measurement with the focus on PIV. CAD modeling of geometries and rapid prototyping of molds has been reviewed. Different processes of casting rigid and compliant models for experimental analysis have been reviewed and the accuracy of construction of each method has been compared. A review of refractive index matching and blood mimicking flow circuits is also provided. Methodologies and results of the most influential experimental studies are compared to elucidate the benefits, accuracy and limitations of each method.

Preparation, Optimization and Physicochemical Characterization of Aripiprazole Loaded Nano-porous in situ Forming Implant.

BACKGROUND: Multiple applications of antipsychotic agents are the main obstacle in the treatment of schizophrenia. Due to behavioral abnormalities, low compliance is observed in most of the psychotic patients. Designing of new drug delivery systems to overcome compliance problem seems to be necessary. In situ forming implants are a suitable choice for the delivery of antipsychotic agents due to their easy administration process and sustained release kinetics. OBJECTIVE: In this study, a novel poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) based nanoporous in situ implant system is developed for delivery of aripiprazole. METHODS: Entrapment efficiency, drug loading, rheological features, morphological characteristics and release profile of nano-porous in situ implant system are analyzed in this study. RESULTS: Entrapment efficiency and drug loading coefficient were modeled and impact of different experimental parameters was analyzed using D-optimal study. Entrapment efficiency and drug loading were optimized at 99.32% and 75.23%, respectively. Rheological analyses demonstrated that the developed formulation is a highly cross-linked gel with possible capability for controlled delivery of aripiprazole. According to the FTIR studies, aripiprazole was intact within polymer networks. SEM and light microscopic analyses proved the acceptable morphological characteristics of in situ gels. Release studies demonstrated a biphasic pattern of release. After initial burst release, a sustained pattern was observed for 18 days. The release data was fitted to Korsmeyer-Peppas model and release pattern was found out to be Fickian. In addition, the release profile was compared with novel pluroniccarrageenan based hydrogel system. CONCLUSION: PHBV based in situ forming implant seems to be a novel formulation for delivery of Aripiprazole.