Investigation of the constituents of commercially available toothpastes.

OBJECTIVES: Toothpaste plays a pivotal role in oral and dental hygiene. This cross-sectional study not only investigates the constituents of toothpastes available in the market and their frequency across different brands but also delves into the potential side effects, irritations, or unfavourable outcomes of these constituents, emphasizing the broader health and environmental implications. METHODS: The largest of the five major chain markets in each district of Istanbul was visited, and adult toothpastes were included in this study. All the constituents that make up the toothpaste were individually recorded in an Excel database. Subsequently, literature regarding the purposes, toxic and potential side effects of each ingredient was gathered using databases such as Google Scholar, PubMed and ScienceDirect. The percentages of these ingredients' occurrence among all the toothpastes were calculated, and the ingredients were categorized into 15 distinct groups based on their usage purposes. RESULTS: There were 160 different varieties of toothpaste belonging to 19 different brands on the market shelves. Although a total of 244 different ingredients were identified, only 78 of them were included in the study. Among the analysed toothpaste types, 105 of them were found to contain 1450 ppm fluoride, whilst 26 toothpaste variants were discovered to have fluoride levels below this value. Among the various ingredients analysed, particular attention was drawn to commonly debated compounds in oral care products. Specifically, titanium dioxide was found in 68% (n = 111) of the varieties, sodium lauryl sulphate in 67% (n = 108) and paraben in 2% (n = 4), respectively. CONCLUSION: Whilst certain ingredients may raise concerns for potential side effects and health considerations within the human body, the toothpaste has long been regarded as an indispensable tool for maintaining optimal oral and dental health. However, gaining a deeper understanding and conducting research on each constituent that comprises the toothpaste, as well as raising awareness in this regard, holds significant importance for human health.

Ingredients in Commercially Available Mouthwashes.

OBJECTIVES: Mouthwashes, a cornerstone of oral and dental hygiene, play a pivotal role in combating the formation of dental plaque, a leading cause of periodontal disease and dental caries. This study aimed to review the composition of mouthwashes found on retail shelves in Turkey and evaluate their prevalence and side effects, if any. METHODS: The mouthwashes examined were sourced from the 5 largest chain stores in each district of Istanbul. A comprehensive list of the constituents was meticulously recorded. The research was supported by an extensive compilation of references from scholarly databases such as Google Scholar, PubMed, and ScienceDirect. Through rigorous analysis, the relative proportions of mouthwash ingredients and components were determined. RESULTS: A total of 45 distinctive variations of mouthwashes, representing 17 prominent brands, were identified. Amongst the 116 ingredients discovered, 70 were evaluated for potential adverse effects and undesirable side effects. The aroma of the mouthwash (n = 45; 100%), as welll as their sodium fluoride (n = 28; 62.22%), sodium saccharin (n = 29; 64.44%), sorbitol (n = 21; 46.6%), and propylene glycol (n = 28; 62.22%) content were the main undesireable features. CONCLUSIONS: The limited array of mouthwashes found on store shelves poses a concern for both oral and public health. Furthermore, the intricate composition of these products, consisting of numerous ingredients with the potential for adverse effects, warrants serious attention. Both clinicians and patients should acknowledge the importance and unwarranted side effects of the compnents of the mouthwashes.

Management of a facial talon cusp on a maxillary permanent central incisor: a case report and review of the literature.

BACKGROUND: A talon cusp is a morphologically well-delineated accessory cusp. This case report discusses the unusual appearance of a talon cusp on the facial surface of the maxillary right permanent central incisor, which was conservatively treated and followed up for a period of 1 year. METHODS: A 21-year-old female was referred for the treatment of a maxillary right central incisor that caused an esthetic problem. Intraoral examination and radiographic and computerized tomographic investigation indicated that there was no connection between the pulp chamber, a "V"-shaped radiopaque structure, and three radiolucent globe areas. The accessory cusp was treated by selective cuspal grinding, followed by resin-based composite placement. The restoration was clinically evaluated 1 week after placement, as a baseline, and after 1 year. The restoration did not exhibit postoperative sensitivity at the 1-year evaluation. No difference was observed in the color match, marginal discoloration, marginal adaptation, or anatomic form compared with the baseline evaluation. CONCLUSION: The management and treatment outcome of a talon cusp depends on its size, presenting complications and patient cooperation. The present case report outlines the conservative management of a talon cusp. CLINICAL SIGNIFICANCE: This paper outlines a viable esthetic treatment option and a review of the relevant literature with regards to managing a facial talon cusp.

The investigation of non-invasive techniques for treating early approximal carious lesions: an in vivo study.

OBJECTIVES: The aim of this study was to examine non-cavitated approximal caries using non-invasive treatment methods. MATERIALS AND METHODS: Molar and premolar teeth with approximal caries were used in this in vivo study. Approximal caries lesions were evaluated with visual and radiographic inspection and with the DIAGNOdent device. Five groups were formed to study non-invasive treatment, and each had at least 25 early approximal carious lesions. Patients in the control group were not treated. After the separation, either ozone application, acidulated phosphate fluoride gel, CPP-ACP-containing material (Tooth Mousse), or an antibacterial bonding agent (Clearfil Protect Bond) was used. For 18 months after the non-invasive treatment, radiological controls were used to observe the progress of the initial and approximal caries in the 1st, 3rd, 6th and 12th months of follow-up. A Mann-Whitney U-test was used to perform the statistical analysis; in-group comparisons were made with the Wilcoxon signed-rank test, and a quantitative assessment was performed using a chi-squared test. RESULTS: At the end of 18 months, the caries lesions in the control group were observed to progress (P < 0.01). The lesions that were scored as 1a during a visual inspection recovered by using non-invasive treatments. CONCLUSION: Approximal caries lesions that were detected at the early stages remained stationary when using antibacterial agents and materials that promoted remineralisation. CLINICAL RELEVANCE: Antibacterial agents and remineralisation materials can be used in treatment of early approximal caries lesions.

Effect of the erbium:yttrium-aluminum-garnet laser or diamond bur cavity preparation on the marginal microleakage of class V cavities restored with different adhesives and composite systems.

The aim of this in vitro study was to compare the microleakage of Er:YAG laser and diamond bur on different bonding systems in class V restorations. Class V cavities were prepared with Er:YAG laser or diamond bur on 80 intact human molars. Teeth were randomly distributed into ten groups and cavities were restored with CeramX duo (DENTSPLY) or Filtek Silorane (3M/ESPE) using different bonding materials (One Coat 7.0 (Coltène), XP Bond (DENTSPLY), Clearfil Protect Bond (Kuraray), AdperSE (3M/ESPE), and Silorane System Adhesive (3M/ESPE). All specimens were subjected to thermocycling and load cycling. After being immersed in silver nitrate dye, the specimens were sectioned. Microleakage was evaluated by stereomicroscope and SEM. Data were statistically analyzed by one-way ANOVA, Kruskal-Wallis, and Mann-Whitney tests. Statistically differences were found between groups (p > 0.05) and cavities prepared with the Er:YAG laser showed higher microleakage than diamond bur. The microleakage of different bonding systems was influenced by the choice of diamond bur or Er:YAG laser for class V composite cavity preparation.

Microleakage of repaired class V silorane and nano-hybrid composite restorations after preparation with erbium:yttrium-aluminum-garnet laser and diamond bur.

The aim of this in vitro study was to compare the microleakage of repaired class V resin composite restorations prepared either by Er:YAG laser or a diamond bur. Ninety-six intact human molar teeth were randomly distributed into eight groups. In the first four groups, class V cavities (3 × 3 × 3 mm) prepared on the buccal and lingual surfaces of the teeth using an erbium:yttrium-aluminum-garnet laser (VersaWave, HOYA ConBio, Japan). Similar class V cavities were prepared in the second four groups using a diamond bur (S-Class, Komet, UK). Teeth in groups 1, 2, and 5, 6 were restored with a nano-ceramic composite (Ceram.X duo, DENTSPLY), whereas a silorane material (Filtek Silorane, 3M ESPE) was used to restore cavities in groups 3, 4, and 7, 8. Two different adhesive systems (XP Bond, DENTSPLY, and Silorane System Adhesive, 3M ESPE) were also used. All specimens were aged for 7 days. New cavities (3 × 3 × 3 mm) were prepared adjacent to the old restorations with Er:YAG laser (groups I-IV) or diamond bur (groups V-VIII). Different repair materials were then applied to the new cavities using the previous two restorative materials and two adhesive systems. All teeth were subjected to thermocycling (5,000 cycles between 5 and 55°C) and axial loadcycling (30 N, 1 Hz, 2,000 cycles). Specimens were immersed in 50% w/w silver nitrate solution. Teeth were sectioned longitudinally in buccolingual direction. Stereomicroscope (Nikon SMZ 800) and SEM (JEOL JSM 5600) were used to evaluate the microleakage that existed at the interface between the old restorations and the repair materials. Data were analyzed statistically with one-way ANOVA and Tukey tests (p < 0.05). Even though no statistically significant differences were found between any of the groups, the cavities repaired with different restoratives showed slight microleakage, especially those prepared by Er:YAG laser (p > 0.05). No microleakage scores were obtained in the groups repaired with Filtek Silorane/Filtek Silorane and Ceram.X/Ceram.X. All the substances tested can be used as repair materials for immediate repair after Er:YAG laser and diamond bur. All substances tested in this study can be used as immediate repair materials after cavity preparations with Er:YAG laser or diamond bur.