Hydroxypropyl Methylcellulose Orodispersible Film Containing Desloratadine for Geriatric Use: Formulation and Evaluation.

BACKGROUND: Oral strip is very similar to thin strip of postage stamp in shape, size and thickness. The strip is designed to be placed on the tongue or any oral mucosal tissue which immediately gets wet and hydrated after being in contact with the saliva. Desloratadine is one of the better- known second-generation antihistamines that has been studied for being effective in relieving the allergic nasal and skin symptoms. OBJECTIVE: The aim of this study is to develop desloratadine orodispersible film (ODF) with fast disintegration time and suitable mechanical strength to treat allergic symptoms in geriatric patients in order to increase compliance and convenience. METHODS: Solvent casting method using hydroxypropyl methylcellulose (HPMC) as the film forming polymer was applied. Polyethylene glycol 400 (PEG 400) and glycerol (Gly) were used as the plasticizers and citric acid (CA) was used as saliva stimulating agent. The resultant films were evaluated for disintegration time, folding endurance, surface pH, weight variation, thickness, surface morphology using scanning electron microscopy, drug content, content uniformity, moisture loss, moisture uptake, and drug-excipient compatibility using DSC and FT-IR. RESULTS: All the selected films started to disintegrate in less than 14 seconds. Selected optimum films exhibited good mechanical properties with a folding endurance value greater than 100. The uniformity in weight, thickness, and drug content in the selected films was obtained. Surface pH was within the normal range (6.4 - 6.8). A smooth surface of the films was obtained and drugexcipient compatibility was proved using DSC and FT-IR. The dissolution test was done for optimum film formulations by simulating the oral cavity physiological conditions using the conventional dissolution test apparatus. More than 87% of the drug was released by the 4th minute. CONCLUSION: Orodispersible film of desloratadine was successfully prepared by solvent casting method in order to improve the disintegration/dissolution of the drug in oral cavity and hence better patient compliance and effective therapy.

Formulation and characterization studies of inclusion complexes of voriconazole for possible ocular application.

In our study, Voriconazole (VOR) was selected as an active agent to be used for the treatment of ocular fungal infections. To overcome low aqueous solubility of VOR, inclusion complexes with α-cyclodextrin (α-CD), ß-cyclodextrin (ß-CD), γ-cyclodextrin (γ-CD), hydroxypropyl-cyclodextrin (HP-CD), hydroxypropyl-ß-cyclodextrin (HP-ß-CD) hydroxypropyl-γ-cyclodextrin (HP-γ-CD), methyl-ß-cyclodextrin (M-ß-CD) and sulfabutylether-ß-cyclodextrin (SBE-ß-CD) were formulated. Characterization studies revealed that inclusion complexes were formulated successfully with the lyophilization method. Aqueous solubility of VOR was enhanced up to 86 fold with the formation of the inclusion complexes. MTT analyses results revealed the safety of the complexes on 3T3 mouse fibroblast cell lines while Microbroth Dilution Method revealed the remarkable antifungal activities of the complexes. Analyses results revealed that inclusion complexes will overcome the poor ocular bioavailability of VOR resulting inefficient treatment of severe ocular fungal infections.

Effect of different molecular weight PLGA on flurbiprofen nanoparticles: formulation, characterization, cytotoxicity, and in vivo anti-inflammatory effect by using HET-CAM assay.

Objective: The effect of polymers used in nanoparticle (NP) production on the formulation properties is one of the few studied issues. Therefore, this study aims to formulate flurbiprofen (FLB) loaded NPs with different molecular weight (Mw) poly lactic-co-glycolic acid (PLGA) and investigate the effect of Mw on NP character. One of the most important objectives is to provide a high anti-inflammatory effect with a low dose and the anti-inflammatory efficacy of the selected optimal formulation is to be determined by in vivo hen's egg test on Chorioallantoic Membrane (HET-CAM) analysis that a new, popular and in vivo animal experiment alternative method.Significance: To determine the anti-inflammatory efficacy of the optimum formulation by HET-CAM analysis. To the best of our knowledge, this is the first report on the in vivo anti-inflammatory evaluation of FLB-loaded PLGA NP using the in vivo HET-CAM assay.Methods: Blank and FLB-loaded PLGA NPs were prepared using a nanoprecipitation technique. The cell viability test for all formulation was performed with MTT in the NIH-3T3 mouse embryonic fibroblast cell line. The anti-inflammatory activity of optimum formulation (A6) was examined using the in vivo HET-CAM assay.Results: The particle sizes (PSs) of the FLB-loaded PLGA NPs were between 175 and 198 nm. The encapsulation efficiency (EE%) was a range of 82-93%. In vitro release of NPs showed extended-release up to 144 h. The release kinetics were fitted to the Peppas-Sahlin and Weibull models. The results showed that PS, PDI, EE%, and release rates of NPs were directly related to the Mw of PLGA. There is no statistically significant difference in cell viability study was observed between blank and FLB-loaded PLGA NPs. The in vivo anti-inflammatory activity results indicated that A6 coded formulation was showed significantly good anti-inflammatory potential at low dose.Conclusions: It could be concluded that FLB-loaded NPs seem to be a promising extended-release drug delivery system for oral administration with a low dose and high efficiency.

Evaluation of wound healing effect of chitosan-based gel formulation containing vitexin.

Acute or chronic wounds are one of the most common health problems worldwide and medicinal drugs or traditional remedies are often used in wound healing. Further studies regarding wound treatment are rapidly continuing. Vitexin is a phenolic compound, which is found in many medicinal plants, has different pharmacological effects such as anti-inflammatory, analgesic and antioxidant. In the present study, it is aimed to investigate the wound healing effect of formulation prepared as chitosan-based gel with vitexin in vivo and in vitro. Cytotoxicity and wound healing assays were used for in vitro and excisional wound model is used for in vivo studies. Extracted tissues from wound area were histologically examined. Wound healing process was monitored on 7, 14 and 21st days. When wound construction was evaluated, chitosan-based gel formulation containing vitexin demonstrated significant effect compared to control group. Histological examinations demonstrated that skin regeneration was promoted by vitexin formulation. Significant cell proliferation was observed with vitexin/chitosan dispersion in the wound healing assay performed with NIH 3T3 and HaCaT cells. In conclusion, our test substance chitosan-based gel formulation containing vitexin significantly accelerated wound healing both in vivo and in vitro.

Clarithromycin-Loaded Poly (Lactic-co-glycolic Acid) (PLGA) Nanoparticles for Oral Administration: Effect of Polymer Molecular Weight and Surface Modification with Chitosan on Formulation, Nanoparticle Characterization and Antibacterial Effects.

Clarithromycin (CLR) is a member of the macrolide antibiotic group. CLR has low systemic oral bioavailability and is a drug of class II of the Biopharmaceutical Classification System. In many studies, using nanoparticles (NPs) as a drug delivery system has been shown to increase the effectiveness and bioavailability of active drug substances. This study describes the development and evaluation of poly (lactic-co-glycolic acid) (PLGA) NPs and chitosan (CS)-coated PLGA NPs for oral delivery of CLR. NPs were obtained by nanoprecipitation technique and characterized in detail, and the effect of three molecular weights (Mw1: 7.000-17.000, Mw2: 38.000-54.000, Mw3: 50.000-190.000) of PLGA and CS coating on particle size (PS), zeta potential (ZP), entrapment efficiency (EE%), and release properties etc. were elucidated. Gastrointestinal stability and cryoprotectant effect tests were performed on the NPs. The PS of the prepared NPs were in the range of 178 to 578 nm and they were affected by the Mw and CS coating. In surface-modified formulations with CS, the ZP of the NPs increased significantly to positive values. EE% varied from 62% to 85%, depending upon the Mw and CS coating. In vitro release studies of CLR-loaded NPs showed an extended release up to 144 h. Peppas-Sahlin and Weibull kinetic model was found to fit best for CLR release from NPs. By the broth microdilution test method, the antibacterial activity of the formulations was determined on Staphylococcus aureus (ATCC 25923), Listeria monocytogenes (ATCC 1911), and Klebsiella pneumoniae (ATCC 700603). The structures of the formulations were clarified by thermal (DSC), FT-IR, and 1H-NMR analysis. The results showed that PS, ZP, EE%, and dissolution rates of NPs were directly related to the Mw of PLGA and CS coating.

Vaginal Suppositories with siRNA and Paclitaxel-Incorporated Solid Lipid Nanoparticles for Cervical Cancer: Preparation and In Vitro Evaluation.

The objective of this study is to prepare vaginal suppository containing chemotherapeutic agent and genetic material that can be applied locally for cervical cancer. Cervical cancer is one of the most life-threatening types of cancer among women and is generally resistant to chemotherapy. Paclitaxel has been selected as chemotherapeutic agent, and siRNA that inhibits the Bcl-2 oncogene has been selected as the genetic material for simultaneous vaginal delivery. For this purpose, three different solid lipid nanoparticles (SLNs) were prepared that include Bcl-2 siRNA and paclitaxel and paclitaxel/Bcl-2 siRNA combination separately, and these SLN formulations were dispersed in vaginal suppositories prepared with PEG 6000. First, the physicochemical properties of SLNs, their cytotoxicities on HeLa cell lines, and the transfection ability of siRNA-incorporated SLN on the cells have been examined. Afterward, the release of SLNs from the three different vaginal suppositories prepared has been determined via horizontal diffusion chamber system. The loaded amount to the SLNs and release amount from suppositories of paclitaxel have been determined via HPLC, whereas stability, loading, and release amount of siRNA has been determined via gel retardation system and UV spectrophotometer.

Desloratadine-Eudragit® RS100 Nanoparticles: Formulation and Characterization.

OBJECTIVES: The objective of the present study was to formulate Desloratadine-Eudragit® RS100 nanoparticles and investigate the characteristics of the prepared nanoparticles. MATERIALS AND METHODS: The nanoparticles were prepared by spray drying method and the quantification of desloratadine (DL) was carried out with a high performance liquid chromatography (HPLC) method. RESULTS: DL was successfully loaded to polymer and the developed HPLC method was found to be linear, reproducible, precise, accurate, specific and selective. Characterization of the nanoparticles including entrapment efficiency, particle size, zeta potential, morphology, polidispersity index, solid state characterizations and drug release was performed. In vitro release studies of DL loaded nanoparticles were also examined in the simulated intestinal fluid (pH 7.4). In vitro release of DL from nanoparticle formulations followed Korsemeyer-Peppas model. CONCLUSION: A validated HPLC method was developed for the determination of DL. Proposed spray drying method can be successfully applicable to the nanoparticle preparation containing DL. In addition, the release studies of all nanoparticles and active substance have been studied comparatively. Hence, it could be concluded that DL loaded nanoparticles seem to be a promising drug delivery system for the active agent.

Preparation and in vitro evaluation of vaginal formulations including siRNA and paclitaxel-loaded SLNs for cervical cancer.

Cervical cancer is one of the most life threatening types of cancer among women and is generally resistant to chemotherapy. The objective of this study was to prepare a vaginal suppository containing a chemotherapeutic agent and a genetic material that can be applied locally for cervical cancer. Paclitaxel was selected as the chemotherapeutic agent and siRNA which inhibits BCL-2 oncogene was selected as the genetic material. Bcl-2 siRNA, paclitaxel and paclitaxel/Bcl-2 siRNA combination were incorporated into solid lipid nanoparticles (SLNs) and were dispersed separately in vaginal suppositories prepared with PEG 6000. Physicochemical properties of SLNs, their cytotoxicities on HeLa cell lines and also the effect of SLNs on the total protein amount of the cells were examined followed by the investigation of release rates of the active materials from the SLNs prepared. Average diameters of all SLNs prepared were below 180nm with a positive zeta potential value between +22.20 and +48.16mV at the pH range of 4.2 and 7.4. The release of Bcl-2 siRNA from SLNs incorporated Bcl-2 siRNA and the release of paclitaxel (PTX) from PTX incorporated SLNs were completed within 12h and 36h. SLNs incorporating Bcl-2 siRNA and paclitaxel/Bcl-2 siRNA were found to be more toxic when compared to paclitaxel incorporated SLN and placebo SLN. The disintegration of the vaginal suppositories as well as the release of the SLNs was completed within 2 h. This study indicates that vaginal suppository containing SLNs can bring the advantages of the simultaneous delivery of paclitaxel and siRNA via vaginal route with no help from professionals.

Chitosan nanoparticles for ocular delivery of cyclosporine A.

In the present study, cyclosporine A (CsA) was successfully incorporated into cationic chitosan nanoparticles by spray-drying method aiming ocular application. Physicochemical characterisation of particles was performed in detail. Among the particles prepared using three types of chitosan with different molecular weights, particles containing chitosan with medium molecular weight was selected for in vivo studies. Selection was dependent on higher incorporation and encapsulation efficiencies of CsA and also better release characteristic in simulated tear fluid. Sheep were used in in vivo studies. Biological samples were collected at predetermined time intervals and were analysed by enzyme immune assay. CsA could be detected in both aqueous and vitreous humour samples for the duration of 72 h. In vivo release profiles indicated prolonged release of active agent from positively charged chitosan formulations. This may be attributed to enhanced residence time at the corneal and conjunctival surfaces.