Average SAR prediction, validation, and evaluation for a compact MR scanner head-sized RF coil.

A recently developed compact 3 T (C3T) MRI scanner with high performance gradients [1, 2] has a dedicated radiofrequency (RF) transmit coil that exposes only the head, neck and a small portion of the upper body region during head-first scanning. Due to the unique coil geometry and patient positioning, the established SAR model used for a conventional whole-body scanner cannot be directly translated to the C3T. Here a specific absorption rate (SAR) estimation and validation framework was developed and used to implement a dedicated and accurate SAR prediction model for the C3T. Two different SAR prediction models for the C3T were defined and evaluated: one based on an anatomically derived exposed mass, and one using a fixed anatomical position located caudally to the RF coil to determine the exposed mass. After coil modeling and virtual human body simulation, the designed SAR prediction model was implemented on the C3T and verified with calorimetry and in vivo scan power monitoring. The fixed-demarcation exposed mass model was selected as appropriate exposed mass region to accurately estimate the SAR deposition in the patient on the C3T.

A printed Yagi-Uda antenna for application in magnetic resonance thermometry guided microwave hyperthermia applicators.

Biological studies and clinical trials show that addition of hyperthermia stimulates conventional cancer treatment modalities and significantly improves treatment outcome. This supra-additive stimulation can be optimized by adaptive hyperthermia to counteract strong and dynamic thermoregulation. The only clinically proven method for the 3D non-invasive temperature monitoring required is by magnetic resonance (MR) temperature imaging, but the currently available set of MR compatible hyperthermia applicators lack the degree of heat control required. In this work, we present the design and validation of a high-frequency (433 MHz ISM band) printed circuit board antenna with a very low MR-footprint. This design is ideally suited for use in a range of hyperthermia applicator configurations. Experiments emulating the clinical situation show excellent matching properties of the antenna over a 7.2% bandwidth (S 11 < -15 dB). Its strongly directional radiation properties minimize inter-element coupling for typical array configurations (S 21 < -23 dB). MR imaging distortion by the antenna was found negligible and MR temperature imaging in a homogeneous muscle phantom was highly correlated with gold-standard probe measurements (root mean square error: RMSE = 0.51 °C and R 2 = 0.99). This work paves the way for tailored MR imaging guided hyperthermia devices ranging from single antenna or incoherent antenna-arrays, to real-time adaptive hyperthermia with phased-arrays.

Laboratory prototype for experimental validation of MR-guided radiofrequency head and neck hyperthermia.

Clinical studies have established a strong benefit from adjuvant mild hyperthermia (HT) to radio- and chemotherapy for many tumor sites, including the head and neck (H&N). The recently developed HYPERcollar allows the application of local radiofrequency HT to tumors in the entire H&N. Treatment quality is optimized using electromagnetic and thermal simulators and, whenever placement risk is tolerable, assessed using invasively placed thermometers. To replace the current invasive procedure, we are investigating whether magnetic resonance (MR) thermometry can be exploited for continuous and 3D thermal dose assessment. In this work, we used our simulation tools to design an MR compatible laboratory prototype applicator. By simulations and measurements, we showed that the redesigned patch antennas are well matched to 50 Ω (S11<-10 dB). Simulations also show that, using 300 W input power, a maximum specific absorption rate (SAR) of 100 W kg(-1) and a temperature increase of 4.5 °C in 6 min is feasible at the center of a cylindrical fat/muscle phantom. Temperature measurements using the MR scanner confirmed the focused heating capabilities and MR compatibility of the setup. We conclude that the laboratory applicator provides the possibility for experimental assessment of the feasibility of hybrid MR-HT in the H&N region. This versatile design allows rigorous analysis of MR thermometry accuracy in increasingly complex phantoms that mimic patients' anatomies and thermodynamic characteristics.

Conductivity and permittivity imaging at 3.0T.

Tissue conductivity and permittivity are critical to understanding local radio frequency (RF) power deposition during magnetic resonance imaging (MRI). These electrical properties are also important in treatment planning of RF thermotherapy methods (e.g. RF hyperthermia). The electrical properties may also have diagnostic value as malignant tissues have been reported to have higher conductivity and higher relative permittivity than surrounding healthy tissue. In this study, we consider imaging conductivity and permittivity using MRI transmit field maps (B1+ maps) at 3.0 Tesla. We formulate efficient methods to calculate conductivity and relative permittivity from 2-dimensional B1+ data and validate the methods with simulated B1+ maps, generated at 128 MHz. Next we use the recently introduced Bloch-Siegert shift B1+ mapping method to acquire B1+ maps at 3.0 Tesla and demonstrate conductivity and relative permittivity images that successfully identify contrast in electrical properties.