Silver Nanowire/Colorless-Polyimide Composite Electrode: Application in Flexible and Transparent Resistive Switching Memory.

Improving the performance of resistive switching memories, while providing high transparency and excellent mechanical stability, has been of great interest because of the emerging need for electronic wearable devices. However, it remains a great challenge to fabricate fully flexible and transparent resistive switching memories because not enough research on flexible and transparent electrodes, for their application in resistive switching memories, has been conducted. Therefore, it has not been possible to obtain a nonvolatile memory with commercial applications. Recently, an electrode composed of a networked structure of Ag nanowires (AgNWs) embedded in a polymer, such as colorless polyimide (cPI), has been attracting increasing attention because of its high electrical, optical, and mechanical stability. However, for an intended use as a transparent electrode and substrate for resistive switching memories, it still has the crucial disadvantage of having a limited surface coverage of conductive pathways. Here, we introduce a novel approach to obtain a AgNWs/cPI composite electrode with a high figure-of-merit, mechanical stability, surface smoothness, and abundant surface coverage of conductive networks. By employing the fabricated electrodes, a flexible and transparent resistive memory could be successfully fabricated.

Flexible ambipolar organic field-effect transistors with reverse-offset-printed silver electrodes for a complementary inverter.

We report ambipolar organic field-effect transistors and complementary inverter circuits with reverse-offset-printed (ROP) Ag electrodes fabricated on a flexible substrate. A diketopyrrolopyrrole-based co-polymer (PDPP-TAT) was used as the semiconductor and poly(methyl methacrylate) was used as the gate insulator. Considerable improvement is observed in the n-channel electrical characteristics by inserting a cesium carbonate (Cs2CO3) as the electron-injection/hole-blocking layer at the interface between the semiconductors and the electrodes. The saturation mobility values are 0.35 cm(2) V(-1) s(-1) for the p-channel and 0.027 cm(2) V(-1) s(-1) for the n-channel. A complementary inverter is demonstrated based on the ROP process, and it is selectively controlled by the insertion of Cs2CO3 onto the n-channel region via thermal evaporation. Moreover, the devices show stable operation during the mechanical bending test using tensile strains ranging from 0.05% to 0.5%. The results confirm that these devices have great potential for use in flexible and inexpensive integrated circuits over a large area.

Transparent resistive switching memory using aluminum oxide on a flexible substrate.

Resistive switching memory (ReRAM) has attracted much attention in recent times owing to its fast switching, simple structure, and non-volatility. Flexible and transparent electronic devices have also attracted considerable attention. We therefore fabricated an Al2O3-based ReRAM with transparent indium-zinc-oxide (IZO) electrodes on a flexible substrate. The device transmittance was found to be higher than 80% in the visible region (400-800 nm). Bended states (radius = 10 mm) of the device also did not affect the memory performance because of the flexibility of the two transparent IZO electrodes and the thin Al2O3 layer. The conduction mechanism of the resistive switching of our device was explained by ohmic conduction and a Poole-Frenkel emission model. The conduction mechanism was proved by oxygen vacancies in the Al2O3 layer, as analyzed by x-ray photoelectron spectroscopy analysis. These results encourage the application of ReRAM in flexible and transparent electronic devices.

Localized-surface-plasmon-enhanced multifunction silicon nanomembrane Schottky diodes based on Au nanoparticles.

Au nanoparticle (NP)-modified Si nanomembrane (Si NM) Schottky barrier diodes (SBDs) were fabricated by using a transfer-printing method to create pedestals using only one photomask on a flexible substrate. The transfer using the pedestals afforded a yield of >95% with no significant cracks. The plasmonic Au NPs can facilitate the improvement of the incident optical absorption. The Au NP-modified Si NM SBD exhibited enhanced photoresponse characteristics with an external quantum efficiency (η(EQE)) of 34%, a photosensitivity (P) of 27 at a voltage bias of -5 V, a light intensity of 1.2 W cm(-2), and a responsivity (R(ph)) of 0.21 A W(-1). Additionally, the mechanical bending characteristics of the device were observed while a compressive strain up to 0.62% was applied to the diode. The results suggest that the Au NP-modified Si NM SBD has great potential for use in multifunction devices as a strain sensor and photosensor.