Biomechanical analysis using finite element analysis of orbital floor fractures reproduced in a realistic experimental environment with an anatomical model.

Introduction: In this study, we attempted to demonstrate the actual process of orbital floor fracture visually and computationally in anatomically reconstructed structures and to investigate them using finite element analysis. Methods: A finite element model of the skull and cervical vertebrae was reconstructed from computed tomography data, and an eyeball surrounded by extraocular adipose was modeled in the orbital cavity. Three-dimensional volume mesh was generated using 173,894 of the 4-node hexahedral solid elements. Results: For the cases where the impactor hit the infraorbital foramen, buckling occurred at the orbital bone as a result of the compressive force, and the von Mises stress exceeded 150 MPa. The range of stress components included inferior orbital rim and orbital floor. For the cases where the impactor hit the eyeball first, the orbital bone experienced less stress and the range of stress components limited in orbital floor. The critical speeds for blowout fracture were 4 m/s and 6 m/s for buckling and hydraulic mechanism. Conclusion: Each mechanism has its own fracture inducing energy and its transmission process, type of force causing the fracture, and fracture pattern. It is possible to determine the mechanism of the fracture based on whether an orbital rim fracture is present.

Transdermal scopolamine for the treatment of recurrent parotid sialocele: a case report.

Recurrent parotid sialocele is rare and challenging to treat. Treatment options are limited for cases of parotid sialocele that recur despite ductal ligation. This case study presents a patient who underwent wide excision of the right buccal mucosa due to squamous cell carcinoma. During the wide excision, a segment of the parotid duct was excised, and ductal ligation was performed to prevent the occurrence of a sialocele, followed by reconstruction using a folded anterolateral thigh free flap. Twenty-two days after surgery, parotid sialocele occurred despite the initial ductal ligation and subsequent ductal ligation was performed; however, the sialocele recurred. As an alternative therapeutic option, a transdermal scopolamine patch was applied for 3 weeks, with one patch used every 3 days. The results were encouraging, with complete resolution of the sialocele. A transdermal scopolamine offers a noninvasive, convenient method of treating parotid sialocele with minimal side effects. The successful outcome of this case suggests that a transdermal scopolamine can be an effective therapeutic option for recurrent parotid sialocele in conjunction with surgical treatment.

The Value of Anterolateral Thigh Free Flap for the Reconstruction of Malignant Melanoma of the Sole of the Foot.

BACKGROUND: Wide excision of malignant melanoma on the foot usually results in an extensive function-destroying defect, and the reconstruction of foot defects remains challenging for reconstructive surgeons. We propose using anterolateral thigh perforator (ALT) free flaps for the reconstruction of widespread defects caused by malignant melanoma in the sole. METHODS: This retrospective study included 34 patients who underwent reconstruction of sole defects caused by malignant melanoma resection with 35 ALT perforator free flaps between August 2005 and July 2021. RESULTS: In total, 18 male patients and 16 female patients were included (mean age at surgery, 65.4 years). The mean size of the flaps was 100.4 cm 2 . Thirty-three of the 35 flaps survived. Hematoma, seroma, and chronic ulceration were not identified in any cases. All patients achieved independent ambulation within the follow-up period, except 1 patient with gait discomfort. The 5-year overall and disease-free survival rates of patients were 64.4% and 56.6%, respectively. CONCLUSIONS: The ALT flap is a versatile surgical option that should be considered for reconstruction of the sole after malignant melanoma resection, considering its various surgical advantages and the functional aspects of independent ambulation, the aesthetic aspects of wearing conventional footwear, and the anatomical aspects of the sole.

Effective resection of dermatofibrosarcoma protuberans using the novel Saturn's rings technique.

Dermatofibrosarcoma protuberans (DFSP) is a rare, low-grade sarcoma with locally infiltrative characteristics. A wide excision is made with a 5 cm gross margin. However, recently, Mohs micrographic surgery has emerged as an alternative. In this study, we evaluate a novel method (Saturn's Rings technique) for removing tumors that combines the advantages of wide excision and Mohs micrographic surgery. Between September 2001 and March 2020, 29 patients with DFSP, excluding the head and neck, were treated using Saturn's rings technique. Frozen biopsies were performed at regular intervals under various conditions and depths. If the biopsy was positive, a negative margin was obtained through an additional session. The depth and breadth of excision, reconstruction method, and postoperative recurrence were analyzed. The breadth of excision was evaluated at 1 cm intervals. Only 1 session was required in 12 cases, 2 sessions were needed in 13 cases, and 3 or more sessions were performed in 4 cases. In 24 cases, the depth of excision was limited to above the superficial fascia, with a negative biopsy of the superficial fascia. Local flaps were the most common reconstruction method (n = 21, 72.4%). No cases of recurrence were observed at follow-up (average, 45.7 months). Saturn's rings technique for DFSP maximized the preservation of normal tissue with minimal resection, was advantageous for reconstruction, and yielded good results without recurrence.

Role of a fluid-restrictive strategy in flap-surgery: A single center retrospective cohort study.

In this study, we evaluated the outcomes of flap surgery and the incidence of acute kidney injury (AKI) in patients who underwent flap surgery using a fluid-restrictive strategy. We retrospectively reviewed the consecutively collected medical records of patients who underwent flap surgery using the fluid-restrictive strategy of our hospital. The patients were divided into 2 groups based on the period of flap surgery: 2011 to 2014 (initiation period of the fluid-restrictive strategy) and 2015 to 2020 (implementation period). Outcomes of flap surgery and the incidence of AKI were evaluated based on percentage changes in cumulative fluid balance to initial body weight (%FO) on post-operative day 7. A total of 140 patients were enrolled in the study; 50 (35.7%) underwent flap surgery in 2011 to 2014 and 90 (64.3%) in 2015 to 2020. In 2015 to 2020, the median %FO significantly decreased from 2.7 (interquartile range [IQR]: 0.8-7.1) to 0.1 (IQR: -2.2 to 3.4%, P < .001), whereas the success rate significantly increased from 53.3% to 70.5% (P = .048) compared to 2011 to 2014. The incidence of AKI remained unchanged. In multivariate analysis, the odds ratio for success was 2.759 (95% confidence interval: 1.140-6.679) in 2015 to 2020 compared to 2011 to 2014. After successfully implementing the fluid-restrictive strategy, the success rate of flap surgery significantly increased without any further increase in the incidence of AKI. Our experience could serve as a model for implementing a fluid-restrictive strategy in flap surgery.

Fabrication Procedure for a 3D Hollow Nanofibrous Bifurcated-Tubular Scaffold by Conformal Electrospinning.

Electrospinning has shown great potential for the fabrication of 3D nanofibrous tubular scaffolds for bifurcated vascular grafts. However, fabrication of complex 3D nanofibrous tubular scaffolds with bifurcated or patient-specific shapes remains limited. In this study, a 3D hollow nanofibrous bifurcated-tubular scaffold was fabricated by the uniform and conformal deposition of electrospun nanofibers via conformal electrospinning. By conformal electrospinning, electrospun nanofibers are conformally deposited onto a complex shape, such as the bifurcated region, without large pores or defects. Owing to conformal electrospinning, a corner profile fidelity (FC), a measure of conformal deposition of electrospun nanofibers at the bifurcated region, was increased 4 times at the bifurcation angle (θB) of 60°, and all FC values of the scaffolds reached 100%, regardless of the θB. Furthermore, the thickness of the scaffolds could be controlled by varying the electrospinning time. Leakage-free liquid transfer was successfully achieved owing to the uniform and conformal deposition of electrospun nanofibers. Finally, the cytocompatibility and 3D mesh-based modeling of the scaffolds were demonstrated. Thus, conformal electrospinning can be used to fabricate leakage-free and complex 3D nanofibrous scaffolds for bifurcated vascular grafts.

A multicenter, randomized, double-blind, comparative study of a multiphasic hyaluronic acid filler and existing hyaluronic acid fillers for temporary restoration of the midface volume of Asian individuals.

BACKGROUND: Giselleligne is the world's first multiphasic gel product that evenly surrounds particles. In the current study, Giselleligne was compared with other existing fillers to evaluate their clinical use, safety, and ability to improve midface volume deficits of Asian individuals. METHODS: A comparative experiment was conducted to gain an understanding of the physical properties of Giselleligne, which is a multilayered hyaluronic acid filler, and to compare its properties with those of existing hyaluronic acid fillers. The primary outcome of this study was a Midface Volume Deficit Scale (MFVDS) score improvement at 24 weeks after the procedure. The secondary outcomes were as follows: MFVDS score improvement after the procedure; MFVDS score changes after the procedure; Global Esthetic Improvement Scale (GAIS) scores as evaluated by the operator after the procedure; the operator's satisfaction with the product; evaluation of the GAIS scores by the patient after the procedure; and pain level of the patient on the day of the procedure. RESULTS: Giselleligne exhibited properties that are expected to result in significantly superior clinical outcomes compared to existing products. Giselleligne was superior not only to the existing products but also in terms of global esthetic improvement, effect duration, and operator satisfaction. Furthermore, Giselleligne was found significantly safer than the existing products. CONCLUSION: Giselleligne is a safer, more user-friendly, and more effective alternative to existing products for improving the midfacial volume.

Lymphaticovenular anastomosis for Morbihan disease: a case report.

Morbihan disease (MD) is a very rare condition characterized by rosaceous or erythematous lymphedema on the upper twothirds of the face. A definitive management strategy for MD is lacking, and treatment is challenging. Herein, we present a case of persistent bilateral eyelid edema treated by lymphaticovenular anastomosis (LVA) and lymph node-vein bypass surgery. The patient experienced persistent bilateral eyelid edema. Indocyanine green lymphography was performed, and the diagnosis of bilateral facial lymphedema was confirmed. On the right side, a preauricular lymphatic vessel was anastomosed to a vein. On the left side, lymphostomy on the preauricular lymph node was done, with anastomosis to the transected proximal end of the concomitant vein of the transverse facial artery. Furthermore, a preauricular lymphatic vessel was anastomosed to a vein. Eyelid edema decreased and progressively improved on both sides. The outcome of this case suggests that LVA and lymph node-vein bypass surgery are appropriate for treating persistent eyelid edema related to MD.

Outcomes of lipectomy in patients with advanced unilateral upper extremity lymphedema with regard to the difference in time required for indocyanine green to reach the axilla: A retrospective cohort study in a single center.

This study aimed to compare and analyze the prognosis after lipectomy with respect to the difference in time required for indocyanine green (ICG) to reach the axilla in patients with advanced unilateral upper extremity lymphedema. The study population was divided into 2 groups, according to the time required by ICG to reach the axilla after injection, that is, <1 hour (<1 hour; n = 9) and over 1 hour (>1 hour; n = 8). The patient's arm volume was examined before surgery and up to 12 months after surgery. The volume difference between the 2 groups was compared using the excess volume ratio. Statistically significant differences were not observed before surgery (P = .847) and 1 month (P = .336), 3 months (P = .630), and 6 months after surgery (P = .124) between the excess volume ratio values of the < 1 hour and > 1 hour groups. A statistically significant difference was confirmed 12 months after surgery (P = .034). The difference in the time when ICG reached the axilla in patients with lymphedema was associated with prognosis after lipectomy. The difference in time could possibly be used as a variable to classify the progress of lymphedema in the future.

Conformal Fabrication of an Electrospun Nanofiber Mat on a 3D Ear Cartilage-Shaped Hydrogel Collector Based on Hydrogel-Assisted Electrospinning.

Electrospinning is a common and versatile process to produce nanofibers and deposit them on a collector as a two-dimensional nanofiber mat or a three-dimensional (3D) macroscopic arrangement. However, 3D electroconductive collectors with complex geometries, including protruded, curved, and recessed regions, generally caused hampering of a conformal deposition and incomplete covering of electrospun nanofibers. In this study, we suggested a conformal fabrication of an electrospun nanofiber mat on a 3D ear cartilage-shaped hydrogel collector based on hydrogel-assisted electrospinning. To relieve the influence of the complex geometries, we flattened the protruded parts of the 3D ear cartilage-shaped hydrogel collector by exploiting the flexibility of the hydrogel. We found that the suggested fabrication technique could significantly decrease an unevenly focused electric field, caused by the complex geometries of the 3D collector, by alleviating the standard deviation by more than 70% through numerical simulation. Furthermore, it was experimentally confirmed that an electrospun nanofiber mat conformally covered the flattened hydrogel collector with a uniform thickness, which was not achieved with the original hydrogel collector. Given that this study established the conformal electrospinning technique on 3D electroconductive collectors, it will contribute to various studies related to electrospinning, including tissue engineering, drug/cell delivery, environmental filter, and clothing.